Losartan potassium dissolution test for drug release evaluation in pharmaceutical capsules using HPLC and UV spectrophotometry

This work describes the development and validation of a dissolution test for 50 mg losartan potassium capsules using HPLC and UV spectrophotometry. A 2(4) full factorial design was carried out to optimize dissolution conditions and potassium phosphate buffer, pH 6.8 as dissolution medium, basket as apparatus at the stirring speed of 50 rpm and time of 30 min were considered adequate. Both dissolution procedure and analytical methods were validated and a statistical analysis showed that there are no significant differences between HPLC and spectrophotometry. Since there is no official monograph, this dissolution test could be applied for quality control routine.

Spectrophotometric determination of catecholamine using vanadium and eriochrome cyanine r

A highly sensitive spectrophotometric method for the analysis of catecholamine drugs; L-dopa and methyldopa, is described. The analysis is based on the reaction of drug molecules with vanadium (V) which is reduced to vanadium (IV) and form complex with eriochrome cyanine R to give products having maximum absorbance (lmax) at 565 nm. Beer's law is obeyed in the range 0.028-0.84 and 0.099-0.996 mg mL-1 for L-dopa and methyldopa, respectively. The statistical analysis as well as comparison with reported methods demonstrated high precision and accuracy of the proposed method. The method was successfully applied in the analysis of pharmaceutical preparations.

Analysis of patterns in mining time series using Qlucore

Raw measurement data does not always immediately convey useful information, but applying mathematical statistical analysis tools into measurement data can improve the situation. Data analysis can offer benefits like acquiring meaningful insight from the dataset, basing critical decisions on the findings, and ruling out human bias through proper statistical treatment. In this thesis we analyze data from an industrial mineral processing plant with the aim of studying the possibility of forecasting the quality of the final product, given by one variable, with a model based on the other variables. For the study mathematical tools like Qlucore Omics Explorer (QOE) and Sparse Bayesian regression (SB) are used. Later on, linear regression is used to build a model based on a subset of variables that seem to have most significant weights in the SB model. The results obtained from QOE show that the variable representing the desired final product does not correlate with other variables. For SB and linear regression, the results show that both SB and linear regression models built on 1-day averaged data seriously underestimate the variance of true data, whereas the two models built on 1-month averaged data are reliable and able to explain a larger proportion of variability in the available data, making them suitable for prediction purposes. However, it is concluded that no single model can fit well the whole available dataset and therefore, it is proposed for future work to make piecewise non linear regression models if the same available dataset is used, or the plant to provide another dataset that should be collected in a more systematic fashion than the present data for further analysis.

Working Capital Management: a Bibliometric Study

This thesis is a study of articles published in scientific journals about working capital management using bibliometric methods. The study was restricted to articles published in 1990–2010 that deal with the whole working capital management topic not a single sub-area of it. Working capital is defined as current assets minus current liabilities; sometimes also a definition of inventory plus accounts receivable minus accounts payable is used. The data was retrieved from the databases ISI Web of Science and Sciverse Scopus. Articles about working capital management were found 23. Content analysis, statistical analysis and citation analysis was performed to the articles. The most cited articles found in citation analysis were also analyzed by nearly same methods. This study found that scientific research of working capital management seems not to be concentrated to specific persons, organizations or journals. The originality and novelty in many articles is low. Many articles studied relation between working capital management and profitability in firms or working capital management practices of firms using statistical analyses. Data in articles was firms of all sizes, except in developing economies only big firms were used. Interesting areas for future research could be surveys made about working capital management practices in firms, finding of best practices, tools for working capital management, inventing or improving alternative views to working capital management like process-oriented view and firm or industry specific studies.

Customer relationship management through life cycle analysis, case professional service firm in B2B market

The objective of this master’s thesis was to study how customer relationships should be assessed and categorized in order to support customer relationship management (CRM) in the context of business-to-business (B2B) and professional services. This sophisticated and complex market is utilizing possibilities of CRM only rarely and even then the focus is often on technology. The theoretical part considered first CRM from the value chain point of view and then discussed the cyclical nature of relationships. The case study focused on B2B professional service firm. The data was collected from company databases and included the sample of 90 customers. The research was conducted in three phases first studying the age, then the service type of relationships and finally executing the cluster analysis. The data was analysed by statistical analysis program SAS Enterprise Guide. The results indicate that there are great differences between developments of customer relationships. While some relationships are dynamically growing and changing, most of customers are remaining constant. This implies expectations and requirements of customers are similarly divergent and relationships should be managed accordingly.

Enabling constructive alignment in programming instruction

In this thesis, simple methods have been sought to lower the teacher’s threshold to start to apply constructive alignment in instruction. From the phases of the instructional process, aspects that can be improved with little effort by the teacher have been identified. Teachers have been interviewed in order to find out what students actually learn in computer science courses. A quantitative analysis of the structured interviews showed that in addition to subject specific skills and knowledge, students learn many other skills that should be mentioned in the learning outcomes of the course. The students’ background, such as their prior knowledge, learning style and culture, affects how they learn in a course. A survey was conducted to map the learning styles of computer science students and to see if their cultural background affected their learning style. A statistical analysis of the data indicated that computer science students are different learners than engineering students in general and that there is a connection between the student’s culture and learning style. In this thesis, a simple self-assessment scale that is based on Bloom’s revised taxonomy has been developed. A statistical analysis of the test results indicates that in general the scale is quite reliable, but single students still slightly overestimate or under-estimate their knowledge levels. For students, being able to follow their own progress is motivating, and for a teacher, self-assessment results give information about how the class is proceeding and what the level of the students’ knowledge is.

Cargo Traffic on the Helsinki-Tallinn Route

The twin-city model has found to increase economical activity and well-being. The similar economical, social and cultural background of Finland and Estonia as well as the EU integration give good preconditions to create a twin-city of Helsinki and Tallinn. The relatively long distance between Helsinki and Tallinn is challenging. Therefore, good transport infrastructure and functioning connections are required to form a twin-city of Helsinki and Tallinn. The connections between these cities can be considered also in broader perspective than only from the viewpoint of the twin-city concept. New markets areas have been emerged in Europe due to collapse of planned economy and integration of Europe. Also the transport routes to the markets are changing. The Hel-sinki-Tallinn sea route can be considered as a fast route to the new markets in the Cen-tral and Eastern Europe. The Helsinki-Tallinn sea route is also a potential route to the Western European markets. This study provides an analysis of transport and cargo flows between Finland and Esto-nia for regional and local planners. The main purpose of the study is to clarify the pre-sent situation of the seaborne cargo flows on the Helsinki-Tallinn route and how the cargo flows will develop in the future. The study focuses on the following thematic enti-ties: the Finnish and Estonian seaborne transport system and cargo flows, the structure and volume of the cargo flows on the Helsinki-Tallinn route, the hinterland cargo flows on the Helsinki-Tallinn route and the transport methods used on the Helsinki-Tallinn route. The study was carried out as a desk research, a statistical analysis and an inter-view study during the spring–autumn 2011. The study reveals that during the period 2002–2010 the volume of the seaborne cargo traffic between Finland and Estonia has increased significantly while the trend of the trade volume between Finland and Estonia has remained nearly constant. This indicates that the route via Estonia is increasingly used in the Finnish foreign trade. Because the ports of Helsinki and Tallinn are the main ports in the cargo traffic between Finland and Estonia, the role of the Helsinki-Tallinn route as a sea leg in the hinterland connections of Finland has increased. The growth of the cargo volume on the Helsinki-Tallinn route was estimated to continue on the annual level of 10 % during the next couple of years. In the long run the growth of the cargo volumes depends on the economical and indus-trial development of the former Eastern European countries. If the IMO’s sulphur regu-lations will come in force, the Helsinki-Tallinn route will become one of the main routes also to the Western European markets, besides of the route via Sweden. The study also shows that the fast and reliable connections year round on the Helsinki-Tallinn route have made it possible for service and logistics companies to reconsider their logistics strategies in a new way in the both side of the Gulf of Finland. Anyway, the ropax concept is seen as the only economical profitable solution on the Helsinki-Tallinn route because cargo and passenger traffic are supporting each other. The trucks (vehicle combinations) will remain the main mode of transport on the Helsinki-Tallinn route because general cargo is the main commodity on the route. IMO’s sulphur regula-tions and the changes in the structure of the Finnish industry may create prerequisites for rail road transport in the hinterland connections of Finland. The twin-city model has found to increase economical activity and well-being. The similar economical, social and cultural background of Finland and Estonia as well as the EU integration give good preconditions to create a twin-city of Helsinki and Tallinn. The relatively long distance between Helsinki and Tallinn is challenging. Therefore, good transport infrastructure and functioning connections are required to form a twin-city of Helsinki and Tallinn. The connections between these cities can be considered also in broader perspective than only from the viewpoint of the twin-city concept. New markets areas have been emerged in Europe due to collapse of planned economy and integration of Europe. Also the transport routes to the markets are changing. The Hel-sinki-Tallinn sea route can be considered as a fast route to the new markets in the Cen-tral and Eastern Europe. The Helsinki-Tallinn sea route is also a potential route to the Western European markets. This study provides an analysis of transport and cargo flows between Finland and Esto-nia for regional and local planners. The main purpose of the study is to clarify the pre-sent situation of the seaborne cargo flows on the Helsinki-Tallinn route and how the cargo flows will develop in the future. The study focuses on the following thematic enti-ties: the Finnish and Estonian seaborne transport system and cargo flows, the structure and volume of the cargo flows on the Helsinki-Tallinn route, the hinterland cargo flows on the Helsinki-Tallinn route and the transport methods used on the Helsinki-Tallinn route. The study was carried out as a desk research, a statistical analysis and an inter-view study during the spring–autumn 2011. The study reveals that during the period 2002–2010 the volume of the seaborne cargo traffic between Finland and Estonia has increased significantly while the trend of the trade volume between Finland and Estonia has remained nearly constant. This indicates that the route via Estonia is increasingly used in the Finnish foreign trade. Because the ports of Helsinki and Tallinn are the main ports in the cargo traffic between Finland and Estonia, the role of the Helsinki-Tallinn route as a sea leg in the hinterland connections of Finland has increased. The growth of the cargo volume on the Helsinki-Tallinn route was estimated to continue on the annual level of 10 % during the next couple of years. In the long run the growth of the cargo volumes depends on the economical and indus-trial development of the former Eastern European countries. If the IMO’s sulphur regu-lations will come in force, the Helsinki-Tallinn route will become one of the main routes also to the Western European markets, besides of the route via Sweden. The study also shows that the fast and reliable connections year round on the Helsinki-Tallinn route have made it possible for service and logistics companies to reconsider their logistics strategies in a new way in the both side of the Gulf of Finland. Anyway, the ropax concept is seen as the only economical profitable solution on the Helsinki-Tallinn route because cargo and passenger traffic are supporting each other. The trucks (vehicle combinations) will remain the main mode of transport on the Helsinki-Tallinn route because general cargo is the main commodity on the route. IMO’s sulphur regula-tions and the changes in the structure of the Finnish industry may create prerequisites for rail road transport in the hinterland connections of Finland.

Influence of the sample area in the variability of losses in the mechanical harvesting of soybeans

The mechanical harvesting is an important stage in the production process of soybeans and, in this process; the loss of a significant number of grains is common. Despite the existence of mechanisms to monitor these losses, it is still essential to use sampling methods to quantify them. Assuming that the size of the sample area affects the reliability and variability between samples in quantifying losses, this paper aimed to analyze the variability and feasibility of using different sizes of sample area (1, 2 and 3 m²) in quantifying losses in the mechanical harvesting of soybeans. Were sampled 36 sites and the cutting losses, losses by other mechanisms of the combine and total losses were evaluated, as well as the water content in seeds, straw distribution and crop productivity. Data were subjected to statistical analysis (descriptive statistics and analysis of variance) and Statistical Control Process (SCP). The coefficients of variation were similar for the three frames available. Combine losses showed stable behavior, whereas cutting losses and total losses showed unstable behavior. The frame size did not affect the quantification and variability of losses in the mechanical harvesting of soybeans, thus a frame of 1 m² can be used for determining losses.

Shewhart's control charts and process capability ratio applied to a sewage treatment station

The current study used statistical methods of quality control to evaluate the performance of a sewage treatment station. The concerned station is located in Cascavel city, Paraná State. The evaluated parameters were hydrogenionic potential, settleable solids, total suspended solids, chemical oxygen demand and biochemical oxygen demand in five days. Statistical analysis was performed through Shewhart control charts and process capability ratio. According to Shewhart charts, only the BOD(5.20) variable was under statistical control. Through capability ratios, we observed that except for pH the sewage treatment station is not capable to produce effluents under characteristics that fulfill specifications or standard launching required by environmental legislation.

Comparative analysis between identified injuries of victims of fall from height and other mechanisms of closed trauma

OBJECTIVE:to identify predictors of death in blunt trauma patients sustaining pelvic fractures and, posteriorly, compare them to a previously reported series from the same center.METHOD: Retrospective analysis of trauma registry data, including blunt trauma patients older than 14 y.o. sustaining pelvic fractures admitted from 2008 to 2010. Patients were assigned into group 1 (dead) or 2 (survivors). We used Student's t, qui square and Fisher's tests for statistical analysis, considering p<0.05 as significant. Posteriorly, we compared predictors of death between both periods.RESULTS: Seventy-nine cases were included. Mean RTS, ISS and TRISS were, respectively, 6.44 + 2.22, 28.0 + 15.2 e 0.74 + 0.33. Nineteen patients died (24,0%). Main cause of death was hemorrhage (42,1%). Group 1 was characterized by (p<0.05) lower systolic blood pressure and Glasgow coma scale means on admission, higher heart rate, head AIS, extremity AIS and ISS means, as well as, higher frequency of severe head injuries and complex pelvic fractures. Comparing both periods, we notice that the anatomic and physiologic severity of injury increased (RTS and ISS means). Furthermore, there was a decrease in the impact of associated thoracic and abdominal injuries on the prognosis and an association of lethality with the presence of complex pelvic fractures.CONCLUSION: There were significant changes in the predictors of death between these two periods. The impact of thoracic and abdominal associated injures decreased while the importance of severe retroperitoneal hemorrhage increased. There was also an increase in trauma severity, which accounted for high lethality.

Choledochal cyst in childhood: review of 30 cases

Objective: To analyze and discuss the clinical data, diagnosis and treatment of a number of patients with cystic dilatation of the common bile duct of a Brazilian pediatric hospital.Methods: We analyzed 30 patients treated at the Martagão Gesteira Institute of Pediatrics and Child Care of the Federal University of Rio de Janeiro for 23 years ,with statistical analysis of epidemiological data, clinical manifestations, diagnosis, treatment and postoperative outcome.Results: We observed a marked female predominance (73.4% of cases), the diagnosis being made in the first decade of life in 90% of patients. The most prevalent clinical manifestation was jaundice (70% of cases) and the classic triad of choledochal cyst was not observed. Abdominal ultrasound was the first imaging examination performed, with a sensitivity of 56.6%, with diagnostic definition in 17 children. Two patients (6.6%) had prenatal diagnosis. All patients underwent surgical treatment, cyst resection with Roux-en-Y hepaticojejunostomy being performed in 80% of cases. The incidence of postoperative complications was 13.3% and the mortality rate was 6.6%, ie two patients were diagnosed with Caroli's disease.Conclusion: The non-observance of the classic triad of choledochal cyst suggests that its incidence is lower than that reported in the medical literature. The surgical treatment of choledochal cysts, with resection and bilioenteric anastomosis, is safe even for small children.

Iliac artery myointimal hyperplasia in rabbits submitted to angioplasty and treated with Moringa oleifera

Objective: to assess post-angioplasty myointimal hyperplasia in iliac artery of rabbits treated with extract of Moringa oleifera leaves. Methods : we conducted a randomized trial in laboratory animals for five weeks of follow-up, developed in the Vivarium of Pharmaceutical Technology Laboratory of the Universidade Federal da Paraíba. We used rabbits from the New Zealand breed, subjected to a hypercholesterolemic diet and angioplasty of the external iliac artery, randomized into two groups: M200 Group (n=10) - rabbits treated with 200mg/kg/day of Moringa oleifera leaves extract orally; SF group (n=10) - rabbits treated with 0.9% saline orally. After five weeks, the animals were euthanized and the iliac arteries prepared for histology. Histological sections were analyzed by digital morphometry. Statistical analysis was performed using the Student's t test. The significance level was 0.05. Results : there was no significant difference in myointimal hyperplasia between M200 and SF groups when comparing the iliac arteries submitted to angioplasty. Conclusion : there was no difference of myointimal hyperplasia between groups treated with saline and Moringa oleifera after angioplasty.

Applications of Industrial Statistics

This dissertation examines knowledge and industrial knowledge creation processes. It looks at the way knowledge is created in industrial processes based on data, which is transformed into information and finally into knowledge. In the context of this dissertation the main tool for industrial knowledge creation are different statistical methods. This dissertation strives to define industrial statistics. This is done using an expert opinion survey, which was sent to a number of industrial statisticians. The survey was conducted to create a definition for this field of applied statistics and to demonstrate the wide applicability of statistical methods to industrial problems. In this part of the dissertation, traditional methods of industrial statistics are introduced. As industrial statistics are the main tool for knowledge creation, the basics of statistical decision making and statistical modeling are also included. The widely known Data Information Knowledge Wisdom (DIKW) hierarchy serves as a theoretical background for this dissertation. The way that data is transformed into information, information into knowledge and knowledge finally into wisdom is used as a theoretical frame of reference. Some scholars have, however, criticized the DIKW model. Based on these different perceptions of the knowledge creation process, a new knowledge creation process, based on statistical methods is proposed. In the context of this dissertation, the data is a source of knowledge in industrial processes. Because of this, the mathematical categorization of data into continuous and discrete types is explained. Different methods for gathering data from processes are clarified as well. There are two methods for data gathering in this dissertation: survey methods and measurements. The enclosed publications provide an example of the wide applicability of statistical methods in industry. In these publications data is gathered using surveys and measurements. Enclosed publications have been chosen so that in each publication, different statistical methods are employed in analyzing of data. There are some similarities between the analysis methods used in the publications, but mainly different methods are used. Based on this dissertation the use of statistical methods for industrial knowledge creation is strongly recommended. With statistical methods it is possible to handle large datasets and different types of statistical analysis results can easily be transformed into knowledge.

Is liver transplantation associated with decreased bone mass in climacteric women?

PURPOSE: To evaluate whether climacteric women undergoing liver transplantation had higher prevalence of decreased bone mass than those without any liver disease. METHODS: A cross-sectional study with 48 women receiving follow-up care at a university hospital in Southeastern Brazil, from February 4th 2009 to January 5th 2011, was conducted. Of these women, 24 were 35 years or older and had undergone liver transplantation at least one year before study entry. The remaining 24 women had no liver disease and their ages and menstrual patterns were similar to those of transplanted patients. Laboratorial tests (follicle-stimulating hormone and estradiol) and bone density measurements of the lumbar spine and femur (equipment Hologic, Discovery WI) were performed. Statistical analysis was carried out by Fisher's exact test, simple Odds Ratio (OR), and multiple logistic regression. RESULTS: Mean age of the women included in the study was 52.8 (±10.7) years-old, 27.1% were premenopausal and 72.9% were peri/postmenopausal. Approximately 14.6% of these women exhibited osteoporosis and 35.4% had low bone mass. The following items were associated with decreased bone mass: being postmenopausal (OR=71.4; 95%CI 3.8 - 1,339.7; p<0.0001), current age over 49 years-old (OR=11.4; 95%CI 2.9 - 44.0; p=0.0002), and serum estradiol levels lower than 44.5 pg/mL (OR=18.3; 95%CI 3.4 - 97.0; p<0.0001). Having a history of liver transplantation was not associated with decreased bone mass (OR=1.4; 95%CI 0.4 - 4.3; p=0.56). CONCLUSION: Liver transplantation was not associated with decreased bone mass in this group of climacteric women.

Bartholin's gland cysts: management with carbon-dioxide laser vaporization

PURPOSE: To evaluate the effectiveness, recurrence rate, and complications of carbon-dioxide laser vaporization in the treatment of Bartholin's gland cysts. METHODS: A retrospective study including 127 patients with symptomatic Bartholin' gland cysts submitted to carbon-dioxide laser vaporization at our institution from January 2005 to June 2011. Patients with Bartholin's gland abscesses and those suspected of having neoplasia were excluded. All procedures were performed in an outpatient setting under local anaesthesia. Clinical records were reviewed for demographic characteristics, anatomic parameters, intraoperative and postoperative complications, and follow-up data. Data were stored and analyzed in Microsoft Excel® 2007 software. A descriptive statistical analysis was performed, and its results were expressed as frequency (percentage) or mean±standard deviation. Complication, recurrence, and cure rates were calculated. RESULTS: The mean age of the patients was 37.3±9.5 years-old (range from 18 to 61 years-old). Seventy percent (n=85) of them were multiparous. The most common symptom was pain and 47.2% (n=60) of patients had a history of previous medical and/or surgical treatment for Bartholin's gland abscesses. Mean cyst size was 2.7±0.9 cm. There were three (2.4%) cases of minor intraoperative bleeding. Overall, there were 17 (13.4%) recurrences within a mean of 14.6 months (range from 1 to 56 months): ten Bartholin's gland abscesses and seven recurrent cysts requiring reintervention. The cure rate after single laser treatment was 86.6%. Among the five patients with recurrent disease that had a second laser procedure, the cure rate was 100%. CONCLUSIONS: At this institution, carbon-dioxide laser vaporization seems to be a safe and effective procedure for the treatment of Bartholin's gland cysts.