Adhesive Quality of Self-adhesive and Conventional Adhesive Resin Cement to Y-TZP Ceramic Before and After Aging Conditions

Purpose: This study evaluated the adhesive quality of simplified self-adhesive and conventional resin cements to Y-TZP in dry and aged conditions. Methods: Y-TZP ceramic blocks (N=192) (5 x 5 x 2 mm) were embedded in acrylic resin and randomly divided into two groups, based on surface conditioning: 96% isopropanol or chairside tribochemical silica coating and silanization. Conditioned ceramics were divided into four groups to receive the resin cements (Panavia F 2.0, Variolink II, RelyX U100 and Maxcem). After 24 hours, half of the specimens (n=12) from each group were submitted to shear bond strength testing (0.5 nun/minute). The remaining specimens were tested after 90 days of water storage at 37 degrees C and thermocycling (12,000x, 5 degrees C-55 degrees C). Failure types were then assessed. The data were analyzed using three-way ANOVA and the Tukey's test (alpha=0.05). Results: Significant effects of ceramic conditioning, cement type and storage conditions were observed (p<0.0001). The groups cleaned using alcohol only showed low bond strength values in dry conditions and the bond strength was reduced dramatically after aging. Groups conditioned using silica coating and silanization showed higher bond strengths both in dry and aged conditions. A high number of specimens failed prematurely prior to testing when they were cleaned using 96% isopropanol. Conclusion: Overall, silica coating and silanization showed higher, stable bond strengths with and without aging. The durability of resin-ceramic adhesion varied, depending on the adhesive cement type.

Evaluation of Different Methods of Optical Impression Making on the Marginal Gap of Onlays Created with CEREC 3D

Objectives: This study evaluated the marginal gaps on several surfaces of onlays created with the Cerec 3D system using one intraoral and two extraoral optical impression methods. Methods: A human molar (#19) was mounted with its adjacent teeth on a typodont (Frasaco) and prepared for a MODL onlay. The typodont was assembled in the mannequin head in order to simulate clinical conditions. The same operator took 36 individual optical impressions using a CEREC 3D camera. For group 1 (IP), a thin layer of titanium dioxide powder (CEREC powder-VITA) was applied directly onto the surface of the preparation for imaging (n=12). For group 2 (EP), a sectional impression was taken with hydrocolloid Identic Syringable (Dux Dental), a die made with polyvinylsiloxane KwikkModel Scan (R-dental Dentalerzeugnisse GmbH) and powdered with titanium dioxide for imaging (n=12). For group 3 (ES), a sectional impression was taken with PVS and a sectional stock tray, a die fabricated in stone (Diamond die- HI-TEC Dental Products) and the die being imaged without powdering (n=12). One operator designed and machined the onlays in Vita Blocks Mark II for Cerec (VITA) using a CEREC 3D. The marginal gaps (pm) were measured with an optical microscope (50x) at 12 points, three on each surface of the MODL. The results were analyzed by two-way ANOVA/Tukey's (p=0.05). Results: The overall mean marginal gaps (mu m) for the three methods were: IP=111.6 (+/- 34.0); EP=161.4 (+/- 37.6) and ES=116.8 (+/- 42.3). IP and ES were equal, but both were significantly less than EP. The pooled mean marginal gaps (mu m) for the occlusal = 110.5 (+/- 39) and lingual = 111.5 (+/- 30.5) surfaces were equivalent and significantly less than the distal = 136.5 (+/- 42.5) and mesial = 161.1 (+/- 43.3). Conclusion: The marginal gap of CEREC 3D onlay restorations was not different when the optical impression was taken intraorally vs extraorally using a stone cast that does not require powdering. The lingual and occlusal surfaces showed the lowest gaps.

In Vitro Evaluation of ICDAS and Radiographic Examination of Occlusal Surfaces and Their Association With Treatment Decisions

This in vitro study evaluated the performance of visual (International Caries Detection and Assessment System [ICDAS]) and radiographic (bitewing [BW]) examinations for occlusal caries detection and their associations with treatment decision (TD). Permanent teeth (n=104) with occlusal surfaces varying from sound to cavitated were selected. Sites were identified from 10x occlusal surface photographs. Standardized bitewing (BW) radiographs were taken. Four dentists with at least five years of experience scored all teeth twice (one-week interval) for ICDAS (0-6), BW (0=sound, 1=caries restricted to enamel, 2=caries in outer third dentin, 3=caries in inner third dentin), and TD (0=no treatment, 1=sealant, 2=microabrasion and sealant, 3=round bur sealant, 4a=resin, 4b=amalgam). Histological validation was performed by observation under a light microscope, with lesions classified on a five-point scale. Intraexaminer and inter-examiner repeatability were assessed using two-way tables and intraclass correlation coefficients (ICCs). Comparisons between percentage correct, specificity, sensitivity, and area under the receiver-operating characteristic (ROC) curve were performed using bootstrap analyses. ICCs for intraexaminer and interexaminer repeatability indicated good repeatability for each examiner, ranging from 0.78 to 0.88, and among examiners, ranging from 0.74 to 0.81. Correlation between ICDAS and TD was 0.85 and between BW and TD was 0.78. Correlation between the methods and histological scores was moderate (0.63 for ICDAS and 0.61 for BW). The area under the ROC curve was significantly greater for ICDAS than for BW (p<0.0001). ICDAS had significantly lower specificity than BW did (p=0.0269, 79% vs 94%); however, sensitivity was much higher for ICDAS than for BW (p<0.0001, 83% vs 44%). Data from this investigation suggested that the visual examination (ICDAS) showed better performance than radiographic examination for occlusal caries detection. The ICDAS was strongly associated with TD. Although the correlation between the ICDAS and BW was lower, it is still valuable in the clinical decision-making process.

MTA-induced neutrophil recruitment: a mechanism dependent on IL-1β, MIP-2, and LTB4

Objective: The objective of this study was to investigate the mediators and the resident peritoneal cells involved in the neutrophil migration (NM) induced by mineral trioxide aggregate (MTA) in mice. Study design: MTA (25 mg/cavity) was injected into normal and pretreated peritoneal cavities (PC) with indomethacin (IND), dexamethasone (DEX), BWA4C, U75302, antimacrophage inflammatory protein-2 (MIP-2), and anti-interleukin-1β (IL-1β) antibodies and the NM was determined. The role of macrophage (MO) and mast cells (MAST) was determined by administration of thioglycollate 3% or 48/80 compound, respectively. The concentration of IL-1β and MIP-2 exudates was measured by ELISA. Results: MTA induced dose- and time-dependent NM into mice PC, with the participation of MO and MAST. NM was inhibited by DEX, BWA4C, and U75302, as well as anti-MIP-2 and anti-IL-1β antibodies. In the exudates, IL-1β and MIP-2 were detected. Conclusions: This study suggests that MTA induces NM via a mechanism dependent on MAST and MO mediated by IL-1β, MIP-2, and LTB4. © 2008 Mosby, Inc. All rights reserved.

Effect of immersion cleansers on the bond strength between a denture base resin and acrylic resin teeth

The aim of the present study was to assess the shear bond strength between a heat-polymerized denture base resin and acrylic resin teeth after immersion in different denture cleansers by simulating a 180-day use. Two acrylic teeth (Biotone, Biotone IPN, Dentsply Ind. e Com., Rio de Janeiro, RJ, Brazil) were chosen for bonding to a heat-polymerized denture base resin (Lucitone 550- Dentsply Ind. e Com., Rio de Janeiro, RJ, Brazil). Eighty specimens were produced and divided into eight groups (n=10) according to their experimental condition (distilled water, 2% chlorhexidine digluconate, 1% sodium hypochlorite and Corega Tabs). Shear bond strength tests (MPa) were performed with a universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed by two-way analysis of variance (ANOVA) and Student-Newman-Keuls' multiple comparisons post hoc analysis (α=.05). The shear bond strength results revealed statistically significant differences between the groups. For the Biotone IPN tooth, significantly lower shear bond strength values were found for the group immersed in sodium-perborate solution (4.48±2.18 MPa) than for the group immersed in distilled water (control group) (10.83±1.84 MPa). For Biotone, significantly higher bond strength values (10.04±3.28 MPa) were found for the group immersed in Corega Tabs than for the control group (5.45±2.93 MPa). The immersion in denture cleanser solutions was more detrimental to the conventional acrylic denture tooth (Biotone) than to the highly cross-linked denture tooth (Biotone IPN). However, this effect was not observed for the groups immersed in Corega Tabs solution, regardless of the type of denture tooth. © 2013 Elsevier Ltd.

Florística e fitossociologia em áreas de campo sujo e cerrado sensu stricto na Estação Ecológica de Pirapitinga-MG

The objectives of this study were to characterize the floristic and to calculate the phytosociological parameters of species present in the areas of 'campo sujo' and 'cerrado' sensu stricto in the Ecological Station of Pirapitinga, Minas Gerais state (ESEC). For the floristic and phytosociologic survey, a total of 190 plots of 100 m2 each were allocated, where all the individuals with circumference at soil level (CSL) ≥ 16 cm in areas of 'campo sujo' and 'cerrado' sensu stricto were sampled. The parameters of frequency, density, dominance, and importance values and Shannon and Pielou indexes were calculated. The floristic similarity between areas was determinated by Sorensen index. In the study areas, a total of 3,224 individuals distributed in 81 species, 70 genera and 40 families were sampled. The richest families were Vochysiaceae and Fabaceae. The cerrado sensu stricto was the vegetal formation with the highest richness of species (81) and highest density (2.257 ind ha-1). Both areas have studied with high diversity and ecological dominance and have low diameter distribution in the form of inverted-J, indicating the predominance of young individuals.

Population structure and canopy use by Coussapoa microcarpa, a strangler hemiepiphyte from the Brazilian Atlantic Forest

We studied density, size structure, and establishment sites of Coussapoa microcarpa in the Brazilian Atlantic rain forest. This species is a hemiepiphyte that begins its life in the tops of trees and survives the death of its host to become a free-standing tree. All individuals of C. microcarpa already rooted in the ground were recorded in a 3.43 ha (1.75 ha in lowland and 1.68 ha in submontane) sample of forest plots. Data on total height, root diameter at breast height, host height and diameter at breast height, as well as height, type and diameter of the establishment site were collected. Coussapoa microcarpa present a high density (36.5 ind. ha-1) and the population studied was composed mainly of young individuals. Young and adults differed in establishment sites. The diameter of establishment sites of young was narrower than the diameter of establishment sites of adults, which points out to a limiting factor (diameter of establishment site) regulating the establishment of C. microcarpa. © 2013 Cambridge University Press.

Variação sazonal da comunidade protozooplanctônica em um ambiente oligotrófico tropical (reservatório de Ilha Solteira, Brasil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Can overharvesting of a non-timber-forest-product change the regeneration dynamics of a tropical rainforest? The case study of Euterpe edulis

The exploitation of non-timber forest products is often considered a low-impact activity in tropical forests. However, assessments of the impacts of such activity are mostly focused on the harvested species and not on the plant community, thus limiting our understanding for establishing forest management recommendations. We investigated the consequences of Euterpe edulis palm heart harvesting on the seed rain in the Brazilian Atlantic rainforest. We compared the density of E. edulis individuals, as well as the density of E. edulis seeds, and the density, richness and functional composition of seed rain of the whole plant community, before and after palm heart harvesting in a 10 ha permanent plot. This assessment was carried out in preserved (typical old-growth Atlantic rainforest) and in disturbed (more open habitat dominated by the native bamboo Guadua tagoara) forest patches. Palm harvesting reduced the E. edulis population from 202.16 to 25.67 ind/ha and its seed rain density from 0.362 to 0.3 seeds/m2 and from 2.395 to 0.15 seeds/m2 in preserved and disturbed forest patches, respectively. Seed density of light-dependent climbers, pioneer trees, bamboo and animal-dispersed seeds increased after palm harvesting, especially in the disturbed forest patches, where palm harvesting was more intense and may have changed the light regime of the understory. On the other hand, species richness of the plant community declined by half. We observed a remarkable decline in the number of animal-dispersed species, especially for those with large seeds, suggesting that the activity of seed dispersers, including many species attracted by E. edulis fruits, was reduced. Therefore, harvesting of E. edulis palm heart may change the regeneration dynamics of the Atlantic rainforest, both due to shifts in forest structure, mediated by the removal of individuals from the forest canopy, and in community functioning, mediated by the interference on the activity of seed dispersers. © 2013 Elsevier B.V. All rights reserved.

Efeito da alimentação e densidade de estocagem no desempenho zootécnico e perfil celular do hepatopâncreas do camarão-da-amazônia Macrobrachium amazonicum (Heller, 1862) (Crustacea, Palaemonidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Preparação e caracterização de óxido de zinco nanoestruturado

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Investigação comparativa das propriedades estruturais do diboreto de magnésio dopado com compostos de carbono

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Aplicação do eletrocapilaridade na manipulação de microgotas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparação de catalisadores de reforma de glicerol para células a combustível de eletrólito sólido

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Investigação das propriedades ópticas e elétricas em alexandrita natural e sintética

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)