Characterization of aluminium single-lap joints for high temperature applications

In this study, an experimental investigation into the shear strength behaviour of aluminium alloy single-lap adhesive joints was carried out in order to understand the effect of temperature on the strength of adhesively bonding joints. Single lap joints (SLJs) were fabricated and tested at RT and high temperatures (100ºC, 125ºC, 150ºC, 175ºC and 200ºC). Results showed that the failure loads of the single-lap joint test specimens vary with temperature and this needs to be considered in any design procedure. It is shown that, although the tensile stress decreased with temperature, the lap-shear strength of the adhesive increased with increasing of temperature up to the glass transition of the adhesive (Tg) and decreased for tests above the Tg.

Assessment of climate change statistical downscaling methods: Application and comparison of two statistical methods to a single site in Lisbon

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente

Numerical and experimental study of tensile strength of single and double-strap repairs

Adhesive bonding as a joining or repair method has a wide application in many industries. Repairs with bonded patches are often carried out to re-establish the stiffness at critical regions or spots of corrosion and/or fatigue cracks. Single and double-strap repairs (SS and DS, respectively) are a viable option for repairing. For the SS repairs, a patch is adhesively-bonded on one of the structure faces. SS repairs are easy to execute, but the load eccentricity leads to peel peak stresses at the overlap edges. DS repairs involve the use of two patches, one on each face of the structure. These are more efficient than SS repairs, due to the doubling of the bonding area and suppression of the transverse deflection of the adherends. Shear stresses also become more uniform as a result of smaller differential straining. The experimental and Finite Element (FE) study presented here for strength prediction and design optimization of bonded repairs includes SS and DS solutions with different values of overlap length (LO). The examined values of LO include 10, 20 and 30 mm. The failure strengths of the SS and DS repairs were compared with FE results by using the Abaqus® FE software. A Cohesive Zone Model (CZM) with a triangular shape in pure tensile and shear modes, including the mixed-mode possibility for crack growth, was used to simulate fracture of the adhesive layer. A good agreement was found between the experiments and the FE simulations on the failure modes, elastic stiffness and strength of the repairs, showing the effectiveness and applicability of the proposed FE technique in predicting strength of bonded repairs. Furthermore, some optimization principles were proposed to repair structures with adhesively-bonded patches that will allow repair designers to effectively design bonded repairs.

Sexual functioning in people with stable chronic diseases

Backgound - In developed countries people are living longer and the incidence of chronic disease is increasing. Chronic disease and its treatments can have a negative impact on sexual functioning and sexual satisfaction. Aim of study - To explore and to compare sexual function and sexual satisfaction in people with stable chronic diseases.

Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs

This work addresses both experimental and numerical analyses regarding the tensile behaviour of CFRP single-strap repairs. Two fundamental geometrical parameters were studied: overlap length and patch thickness. The numerical model used ABAQUS® software and a developed cohesive mixed-mode damage model adequate for ductile adhesives, and implemented within interface finite elements. Stress analyses and strength predictions were carried out. Experimental and numerical comparisons were performed on failure modes, failure load and equivalent stiffness of the repair. Good correlation was found between experimental and numerical results, showing that the proposed model can be successfully applied to bonded joints or repairs.

Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures

This work reports on an experimental and finite element method (FEM) parametric study of adhesively-bonded single and double-strap repairs on carbon-epoxy structures under buckling unrestrained compression. The influence of the overlap length and patch thickness was evaluated. This loading gains a particular significance from the additional characteristic mechanisms of structures under compression, such as fibres microbuckling, for buckling restrained structures, or global buckling of the assembly, if no transverse restriction exists. The FEM analysis is based on the use of cohesive elements including mixed-mode criteria to simulate a cohesive fracture of the adhesive layer. Trapezoidal laws in pure modes I and II were used to account for the ductility of most structural adhesives. These laws were estimated for the adhesive used from double cantilever beam (DCB) and end-notched flexure (ENF) tests, respectively, using an inverse technique. The pure mode III cohesive law was equalled to the pure mode II one. Compression failure in the laminates was predicted using a stress-based criterion. The accurate FEM predictions open a good prospect for the reduction of the extensive experimentation in the design of carbon-epoxy repairs. Design principles were also established for these repairs under buckling.

Single-objective spreading algorithm

This paper addresses the problem of finding several different solutions with the same optimum performance in single objective real-world engineering problems. In this paper a parallel robot design is proposed. Thereby, this paper presents a genetic algorithm to optimize uni-objective problems with an infinite number of optimal solutions. The algorithm uses the maximin concept and ε-dominance to promote diversity over the admissible space. The performance of the proposed algorithm is analyzed with three well-known test functions and a function obtained from practical real-world engineering optimization problems. A spreading analysis is performed showing that the solutions drawn by the algorithm are well dispersed.

Developing persuasive interfaces

MSCC Dissertation in Computer Engineering

Alterations in psychosocial health of people affected by asbestos poisoning

OBJECTIVE To analyze the state of psychosocial and mental health of professionals affected by asbestos.METHODS A cross-sectional study was conducted with 110 professionals working in the Ferrolterra region of Spain, who were affected by asbestos poisoning. This group was compared with a group of 70 shipyard workers with no manifestation of work-related diseases. All the participants were male with a mean age of 67 years. This study was conducted in 2013, between January and June, and used the SCL-90 questionnaire by Derogatis as its primary measure for research. This questionnaire consists of 9 variables that measure psychosomatic symptoms. In addition, an overall index of psychosomatic gravity was calculated. The participants were also asked two questions concerning their overall perception of feeling good. Data were analyzed by ANOVA and logistic regression.RESULTS Participants affected by asbestos poisoning showed high occurrence rates of psychological health variables such as somatization, obsessive-compulsive, interpersonal sensitivity, depression, anxiety, hostility, phobic anxiety, paranoid ideation, psychoticism, and global severity index.CONCLUSIONS Social interaction as a differentiating factor between workers affected by work-related chronic syndromes as compared to healthy participants will possibly aid in the development of intervention programs by improving the social network of affected individuals.

Socioeconomic inequalities and changes in oral health behaviors among Brazilian adolescents from 2009 to 2012

OBJECTIVE To analyze oral health behaviors changes over time in Brazilian adolescents concerning maternal educational inequalities.METHODS Data from the Pesquisa Nacional de Saúde do Escolar(Brazilian National School Health Survey) were analyzed. The sample was composed of 60,973 and 61,145 students from 26 Brazilian state capitals and the Federal District in 2009 and 2012, respectively. The analyzed factors were oral health behaviors (toothbrushing frequency, sweets consumption, soft drink consumption, and cigarette experimentation) and sociodemographics (age, sex, race, type of school and maternal schooling). Oral health behaviors and sociodemographic factors in the two years were compared (Rao-Scott test) and relative and absolute measures of socioeconomic inequalities in health were estimated (slope index of inequality and relative concentration index), using maternal education as a socioeconomic indicator, expressed in number of years of study (> 11; 9-11; ≤ 8).RESULTS Results from 2012, when compared with those from 2009, for all maternal education categories, showed that the proportion of people with low toothbrushing frequency increased, and that consumption of sweets and soft drinks and cigarette experimentation decreased. In private schools, positive slope index of inequality and relative concentration index indicated higher soft drink consumption in 2012 and higher cigarette experimentation in both years among students who reported greater maternal schooling, with no significant change in inequalities. In public schools, negative slope index of inequality and relative concentration index indicated higher soft drink consumption among students who reported lower maternal schooling in both years, with no significant change overtime. The positive relative concentration index indicated inequality in 2009 for cigarette experimentation, with a higher prevalence among students who reported greater maternal schooling. There were no inequalities for toothbrushing frequency or sweets consumption.CONCLUSIONS There were changes in the prevalences of oral health behaviors during the analyzed period; however, these changes were not related to maternal education inequalities.

Multiple skin neoplasms in subjects under 40 years of age in Goiania, Brazil

OBJECTIVE To describe the trend for malignant skin neoplasms in subjects under 40 years of age in a region with high ultraviolet radiation indices.METHODS A descriptive epidemiological study on melanoma and nonmelanoma skin cancers that was conducted in Goiania, Midwest Brazil, with 1,688 people under 40 years of age, between 1988 and 2009. Cases were obtained fromRegistro de Câncer de Base Populacional de Goiânia(Goiania’s Population-Based Cancer File). Frequency, trends, and incidence of cases with single and multiple lesions were analyzed; transplants and genetic skin diseases were found in cases with multiple lesions.RESULTS Over the period, 1,995 skin cancer cases were observed to found, of which 1,524 (90.3%) cases had single lesions and 164 (9.7%) had multiple lesions. Regarding single lesions, incidence on men was observed to have risen from 2.4 to 3.1/100,000 inhabitants; it differed significantly for women, shifting from 2.3 to 5.3/100,000 (Annual percentage change – [APC] 3.0%, p = 0.006). Regarding multiple lesions, incidence on men was observed to have risen from 0.30 to 0.98/100,000 inhabitants; for women, it rose from 0.43 to 1.16/100,000 (APC 8.6%, p = 0.003). Genetic skin diseases or transplants were found to have been correlated with 10.0% of cases with multiple lesions – an average of 5.1 lesions per patient. The average was 2.5 in cases without that correlation.CONCLUSIONS Skin cancer on women under 40 years of age has been observed to be increasing for both cases with single and multiple lesions. It is not unusual to find multiple tumors in young people – in most cases, they are not associated with genetic skin diseases or transplants. It is necessary to avoid excessive exposure to ultraviolet radiation from childhood.

Factors associated with dietary supplement use by people who exercise at gyms

OBJECTIVE To assess the factors associated with the use of dietary supplements by people who exercise at gyms.METHODS A cross-sectional study with a sample defined by convenience, considering the number of gyms registered in the Conselho Regional de Educação Física (Regional Council of Physical Education) of Sao Luis, MA, Northeastern Brazil, from July 2011 to July 2012. The final sample comprised 723 individuals who exercise at gyms. The dependent variable was supplement use, and the explanatory variables were length of time and motivation of the physical exercises, duration, goal and self-perception of training, weekly frequency of gym attendance, sex, age, educational attainment, self-perception of body weight, smoking and self-perception of diet. The association between variables was analysed by hierarchical Poisson regression based on a theoretical model.RESULTS Supplement use was reported by 64.7% of the participants. Most of the sample was male (52.6%). The most frequent age group was 20 to 39 years (74.4%). Most participants (46.1%) had been exercising for over a year. The following variables were associated with supplement use: self-perceiving body weight as below ideal (p < 0.001), smoking (p < 0.001), exercising for 7 to 12 months (p = 0.028) or more than one year (p < 0.001), spending more than two hours at the gym (p = 0.051), and perceiving training as moderate (p = 0.024) or intense (p = 0.001).CONCLUSIONS The use of supplements lacks proper professional guidance, being motivated by individuals unsatisfied with their low body weight and who perceive their workout as intense, which raises the need for monitoring this population.

Tensile behaviour of single and double-strap repairs on aluminium structures

In this work, an experimental study was performed on the influence of plug filling, loading rate and temperature on the tensile strength of single-strap (SS) and double-strap (DS) repairs on aluminium structures. The experimental programme includes repairs with different values of overlap length (LO=10, 20 and 30 mm), and with and without plug filling. The influence of the testing speed on the repairs strength is also addressed (considering 0.5, 5 and 25 mm/min). Accounting for the temperature effects, tests were carried out at room temperature, 50ºC and 80ºC. This will permit a comparative evaluation of the adhesive tested below and above the Glass Transition Temperature (Tg), established by the manufacturer at 67ºC. The global tendencies of the test results concerning the plug filling and overlap length analyses are interpreted from the fracture modes and typical stress distributions for bonded repairs. According to the results obtained from this work, design guidelines for repairing aluminium structures were recommended.

Strength prediction of single- and double-lap joints by standard and extended finite element modelling

The structural integrity of multi-component structures is usually determined by the strength and durability of their unions. Adhesive bonding is often chosen over welding, riveting and bolting, due to the reduction of stress concentrations, reduced weight penalty and easy manufacturing, amongst other issues. In the past decades, the Finite Element Method (FEM) has been used for the simulation and strength prediction of bonded structures, by strength of materials or fracture mechanics-based criteria. Cohesive-zone models (CZMs) have already proved to be an effective tool in modelling damage growth, surpassing a few limitations of the aforementioned techniques. Despite this fact, they still suffer from the restriction of damage growth only at predefined growth paths. The eXtended Finite Element Method (XFEM) is a recent improvement of the FEM, developed to allow the growth of discontinuities within bulk solids along an arbitrary path, by enriching degrees of freedom with special displacement functions, thus overcoming the main restriction of CZMs. These two techniques were tested to simulate adhesively bonded single- and double-lap joints. The comparative evaluation of the two methods showed their capabilities and/or limitations for this specific purpose.

Therapeutic itineraries and explanations for tuberculosis: an indigenous perspective

ABSTRACT OBJECTIVE To analyze explanations for tuberculosis and therapeutic itineraries of Brazilian indigenous people. METHODS Case study with a qualitative-descriptive approach. We conducted semi-structured interviews with 11 Munduruku indigenous, including direct observation of treatment for tuberculosis in the municipality of Jacareacanga, south-western region of the state of Para, Brazil. To identify explanations for tuberculosis and therapeutic itineraries, we performed thematic content analysis. RESULTS Traditional medicine was the first therapeutic option chosen by the indigenous. However, biomedicine was also employed, which indicates a circulation between different therapeutic contexts and health concepts among the Munduruku. The explanations provided ranged from recognition of the signs and symptoms specific to tuberculosis to the attribution of the disease to a spirit that leaves the body and wanders in the woods, returning ill into the body. Unlike the biomedical model, which links tuberculosis transmission strictly to interpersonal contact, in closed spaces without natural lighting and ventilation (preferably domestic environments), the Munduruku associate the disease to an indirect contact between people socially distant (enemies or adversaries) in public and open places. CONCLUSIONS The explanations made by the indigenous are unique and deserve the attention of those who are responsible for developing health public policies, as well as of the teams who work on the villages. To guarantee an efficient control of tuberculosis in these regions, it is necessary that the developed actions integrate biomedicine knowledge and the traditional medicine of the indigenous people, in addition to respecting and welcoming local culture manifestations.