Corpos intrusivos básicos na coluna sedimentar Permo-Carbonífera no vale do rio Corumbataí

As rochas intrusivas básicas associadas a Formação Serra Geral na porção sul do município de Rio Claro e norte de Piracicaba configuram geometrias na forma de diques e soleiras. Estes corpos estão associados à uma parte da Bacia Sedimentar do Paraná que foi deformada por eventos tectônico que resultaram em trends preferencias NW-SE, condicionando a estratigrafia, a intrusão e geometria dos corpos de diabásio e formação da estrutura domática do alto de Pitanga. Os corpos intrusivos tem em sua maioria a forma de soleiras e em menor quantidade a forma de diques. A compreensão destes corpos é importante para o entendimento da estratigrafia da área conhecida como domo de Pitanga na região de Rio e Piracicaba

Jogo baseado em simulação de vida artificial

The market of digital games have grown in the last years, becoming popular between many ages, the number of smartphones and tablets users have also showed a recent increase, including the ones using Android as operational system. The main objective of a digital game is the ludic activity but also it can be used as a tool to education, learning and even simulation. This work proposes the development of a game for smartphones or tablet running on Android operational system, this game will simulate living beings in an environment, each one with different behaviors, based in the concepts of artificial live, cellular automata and emergence. This way simulating the behavior of a living being community with a computational base in artificial live and following concepts of game design. The game can represent visually some characteristics of living beings, as well behaviors and interactions between them, in a very simple way. The game can be upgraded in the future to represent better living beings using more details to the simulation of these

Desenvolvimento de um código computacional para simulação e análise de espectros atômicos

The aim of this work was the development a computer code for simulation and analysis of atomic spectra from databases constructed from the literature. There were created four routines that can be useful for spectroscopic studies in the atomic processes of laser isotope separation. In the first routine, Possible Transitions, the program checks the possible electron transitions from an energy level of the atom present in the database considering the selection rules for an electric dipole transition. The second routine, Locator Transitions, checks the possible electronic transitions within a user-specified spectral region. The routine Spectra Simulator creates simulated spectra using the graphical application gnuplot through lorentzian curve and finally, the routine Electronic Temperature determines the temperature of electronic excitation of the atom, thought the Boltzmann Plot Method. To test the reliability of the program there were obtained experimental emission spectra of a hollow cathode discharge of dysprosium and argon as a buffer gas. The hollow cathode discharge has been subjected to different values of operating currents and pressure of inert gas. The spectra obtained were treated with the assistance of program routines developed (Transition Locator and Spectra Simulator) and temperatures electronic excitation of the atoms of dysprosium in the different discharge conditions were calculated (routine Electronic Temperature). The results showed that the electronic excitation temperature of the neutral dysprosium atoms in the hollow cathode discharge increases with increasing current applied to the cathode and also by increasing the gas pressure buffer. The determination coefficients, R2, obtained by the Electronic Temperature routine using the linear adjust of the Boltzmann Plot Method were greater... (Complete abstract click electronic access below)

A prática de treinamento dos corpos dentro da empresa: um estudo sobre uma ferramenta de controle da qualidade

Befor the vast economical growth and wild scientific and technological development, the companies are demanding, more and more qualification and acting of the services rendered by their employees. Like this, tasks are restricted the they be done with excellence, because the companies are always controlling the worker's development. They are several the tools used by the companies, as acting indexes to control the course of the worker's activities or certain section, integrations for new employees with the objective to present the line of work of the company so that the new employee is framed in these patterns, trainings offered for the employees to carry out their services with quality and compromising, evaluations of year end in order to test the worker's knowledge and to demand better results, finally, the companies hope the employee integrates normativamente into the reality of the company, in way to contribute for the atingimento of the organizational strategies, always collecting for this to obtain the best results and contribute to the growth of the company. This way, that research will present a tool of control of the total quality applied in a company in Rio Clearing's city and that it is managed by an educador. They will be verified the objectives that the company has in relationship a this control, the worker's subjectivity as participant subject of the tool of control of the System of Administration of the Quality and the worker's different glances before these aspects throught an interview.

Simulação de ciclo combinado utilizando software comercial

In Brazil, The power generation has always depended on the rivers, in other words, there are moments that the power generation can vary, which can cause variations in energy supply and even blackout according to the level of water in the reservoirs of the hydroelectric plants. For this reason, many options has been studied, like our example, which is about a combined cycle power plant in Canas. The use of combined cycle is interesting from the point o view of energy, because its efficiency is between 50 and 60%, and from the point of view of environment, because it can burn natural gas, which is cleaner than coal, it reduces the emission of gases that influence on the greenhouse effect. This work aims to perform a technical analysis of a case study of a power plant proposed to be built in Canas by the AES/AES Tietê Group. For the analysis will be used the commercial software GateCycle 6.0.0 from GE, this software has the power of simulating power generation cycles (nuclear, combined, etc.). The energy department of UNESP has the license, which makes possible the academic use of this tool. Two combined cycles were simulated, one using one pressure level HRSG, and another one closer to the real power plant, which is a combined cycle with a three pressure level HRSG. The results were close to expected, for the combined cycle with one pressure HRSG the power was 513,9 MW and a efficiency of 53,27%, in the case with the three pressure level HRSG the power was 517,1 MW and a efficiency of 53,5%. We conclude that the software requires that the user must have the knowledge about the subjects involved in the use of GateCycle in problems resolutions

Corpos humanos: Re-desenho de silo e armazéns às margens do leito férreo da cidade de Presidente Prudente - Centro de Artes Corporais

Não disponível

Simulação de contaminação de sedimentos e águas subterrâneas por gasolina e álcool: um estudo de monitoramento de variações das propriedades físico-químicas

Geophysics studies in areas impacted by petroleum derivatives describe abnormalities of both low and high electrical resistivity (the opposite of electrical conductivity), confirmed as contaminant phase by chemical analysis: this contradiction can be explained by degrading processes that naturally occur and create sub products that can change the environment conductivity. Monitoring the variation of the parameters mentioned serves as a comparative basis to the variation in geoelectrical parameters, which identified the correlation between the same contaminant parameters and the difference between their behavior studied apart, as well as its relations with the biodegradation process. The results are applied to the fuel distribution and storage sectors, leading to the diagnosis and monitoring of possible groundwater contamination scenarios, and the knowledge of the area exposure time to the contaminant, besides the better remediation alternative and impacts control. Among some conclusions, the most significant are the decrease in conductivity over time, so as the increase in Eh value in the gasoline contaminated tank, as well as the decrease in the pH value in the second tank with ethanol, which can be attributed to its degradation. Comparing the variations in both tanks, it is evident that Eh, pH and electrical conductivity do not behave temporally in a similar way, although some correlations between Eh and pH can be related.

Pagamento por serviços ambientais: estudo de caso: simulação da aplicação do programa do “Produtor de Água” na bacia do Rio Pirajibu

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação geoestatística e classificação numérica para o delineamento de unidade de mapeamento de atributos e erosão do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Simulação computacional da extração líquido-líquido fracionada de enzimas para produção de biodiesel

Liquid-liquid extraction is utilized for purification of biomolecules by Aqueous Biphasic Systems (ABS), since this process does not damage the biotechnological potential of these compounds. In this work, using the free software Scilab®, the fractionated liquid-liquid extraction was studied aiming a lipase (target enzyme) partition in a water + PEG + DEX system. Lisozime was considered as contaminant. As computer simulations has been extensively used when a first estimation of technical feasibility of process is desired, this work demonstred that the system is viable for recovery the 80 % till 90 % the target enzyme, but should be noted that the trial aimed only the fractionation of the enzyme target of a contaminant, not its concentration, which should be done by another process.

Captura gravitacional de pequenos corpos por arrasto em um gás modelado usando equações hidrodinâmicas

In this work we have developed an apparatus in order to study the capture of asteroids by planets surrounded by a gas envelope during y-by, to do this we have brought an innovation by using a hydrodynamical gas. We began such project by studying particles trajectories with a code based on the analytical gas. After being used to this model we have started a process to elaborate a code which uses the gas in a numerical way. The hydrodynamical gas is described by equations which are not solved analytically. Therefore, it was used an algorithm able to model the gas by keeping all information of the gas in cells. Thus we have made a code to read such cell`s information and then to solve all calculations. Once this process is done, the program inform us all date about the simulated trajectories

Analise das emissões de CO2 e de energia - simulação com novas tecnologias siderúrgicas

The process of steel production emits a large quantity of greenhouse gases, specifically carbon dioxide (CO2), and the reduction of such emissions is one of the main challenges for the industry in the 21st. Century. To quantify these emissions, the Worldsteel Association (association of the 170 large steel manufacturers of the world) published a methodology (CO2 Emission Data Collection) for calculation and comparison of CO2 emissions among its members. After that, in 2010, this methodology became an ISO (International Organization for Standardization) norm. Today, the calculation of the CO2 emissions in steel making companies follow the ISO 14404-1 for units with blast furnaces and the ISO 14404-2 for units with electric furnaces. In the last years, new technologies were and continue to be developed for the steel making sector aiming at energetic improvements and greenhouse gas reductions (mainly CO2) by the several processes involved in the production of steel. This work had the objective of producing a tool to calculate the CO2 emissions for the steel making sector. An Excel spreadsheet was developed to calculate the emission intensities of CO2 of a steel plant, the Usina Presidente Vargas, of the Companhia Siderúrgica Nacional (CSN). The spreadsheet furnishes results of CO2 emissions and energetic fluxes, and simulates the benefits that some of the new technologies can give to the company. The spreadsheet calculates the emissions in two ways: a) based on the carbon fluxes that enter the unit, and b) based on the emissions of each specific process within the unit (coking, sinterization, blast furnace, among others)

Caracterização do fator de intensidade de tensão em corpos trincados através do método dos elementos finitos

The industry generally has sought materials with high mechanical resistance, low density, thermal stability and corrosion resistance. In the aerospace industry, for example, the use of aluminum alloys, such as Al 2024-T351 and Al 7075-T7351, have become essential. However, the use of these materials often do not resulted in a satisfactory performance of the component, since the presence of cracks can cause total rupture of the component, even with a tension below the yield stress of the material, unexpectedly. In this work, these aluminum alloys were analyzed and samples were modeled by the finite element method. Moreover, in the models were applied two different types of cracks, central and edge crack, a vertical force was applied to result in a tension 70% of the yield stress of the material analyzed. Through stress asymptotic distribution in the region near the crack tip were calculated the values of the stress intensity factors for each crack length, after the stress intensity factors characterized were compared graphically with the values of fracture toughness found in the available literature

Efeito das dimensões dos corpos de prova na resistência à flexão de compósitos restauradores

The aim of this study was to evaluate the influence of specimen size, in comparison with the ISO Standard, on the three point flexural strength of resin composite restorative materials Filtek Supreme and Filtek Z-250. Forty specimens were fabricated for each material with the following length, width and thickness measurements (n = 10): 1) 20 × 2 × 2 mm (ISO 4049); 2) 10 × 2 × 1 mm; 3) 10 × 1 × 1 mm; 4) 8 × 0.8 × 0.8 mm. The composites were inserted in a single increment into two-piece metal device and light-polymerized. The specimens were dry stored at 37 ± 1 °C and protected from light for 7 days. After this period, flexural strength was measured by three-point flexure test using MTS 810 equipment, with a load cell of 10 kN at a speed of 0.5 mm/min. For the evaluated sizes, the results showed significant variability (p = 0.00) with values when compared with the ISO Standard (116.700 MPa), being statistically higher for the test specimens measuring 10 × 1 × 1 mm (142.530 MPa), similar for those of 10  ×  2  ×  1  mm (115.815 MPa) and lower for those of 8 × 0.8 × 0.8 mm (86.650 MPa). There was statistical equality (p = 0.08) for the studied composites (Filtek Supreme, 125.270 MPa; Filtek Z-250, 108.130 MPa). Specimens measuring 10 × 2 × 1 mm provided flexural strength values equivalent to those obtained in the sizes recommended by the ISO 4049 standard, with lower consumption of material, energy and time.

Surface roughness and hardness of yttria stabilized zirconia (Y-TZP) after 10 years of simulated brushing

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)