Trends in dietary intake in Switzerland, 1999 to 2009.

OBJECTIVE: To assess nutrition trends of the Geneva population for the period 1999-2009. DESIGN: Bus Santé Geneva study, which conducts annual health surveys in random samples of the Geneva population. Dietary intake was assessed using a validated FFQ and trends were assessed by linear regression. SETTING: Population-based survey. SUBJECTS: Data from 9283 participants (50% women, mean age 51·5 (sd 10·8) years) were analysed. RESULTS: In both genders total energy intake decreased from 1999 to 2009, by 2·9% in men and by 6·3% in women (both trends P < 0·005). Vegetable protein and total carbohydrate intakes, expressed as a percentage of total energy intake, increased in women. MUFA intake increased while SFA, PUFA and alcohol intakes decreased in both genders. Intakes of Ca, Fe and carotene decreased in both genders. No changes in fibre, vitamin D and vitamin A intakes were found. Similar findings were obtained after excluding participants with extreme dietary intakes, except that the decreases in SFA, vegetable protein and carbohydrate were no longer significant in women. CONCLUSIONS: Between 1999 and 2009, a small decrease in total energy intake was noted in the Geneva population. Although the decrease in alcohol and SFA intakes is of interest, the decrease in Ca and Fe intakes may have adverse health effects in the future.

Profile Following for Inspection of Underwater Structures

We present a seabed profile estimation and following method for close proximity inspection of 3D underwater structures using autonomous underwater vehicles (AUVs). The presented method is used to determine a path allowing the AUV to pass its sensors over all points of the target structure, which is known as coverage path planning. Our profile following method goes beyond traditional seabed following at a safe altitude and exploits hovering capabilities of recent AUV developments. A range sonar is used to incrementally construct a local probabilistic map representation of the environment and estimates of the local profile are obtained via linear regression. Two behavior-based controllers use these estimates to perform horizontal and vertical profile following. We build upon these tools to address coverage path planning for 3D underwater structures using a (potentially inaccurate) prior map and following cross-section profiles of the target structure. The feasibility of the proposed method is demonstrated using the GIRONA 500 AUV both in simulation using synthetic and real-world bathymetric data and in pool trials

TBS (Trabecular Bone Score) is More Sensitive Than BMD to Diabetes-Related Fracture Risk

Background:Type 2 diabetes (T2D) is associated with increased fracture risk but paradoxically greater BMD. TBS (trabecular bone score), a novel grey-level texture measurement extracted from DXA images, correlates with 3D parameters of bone micro-architecture. We evaluated the ability of lumbar spine (LS) TBS to account for the increased fracture risk in diabetes. Methods:29,407 women ≥50 years at the time of baseline hip and spine DXA were identified from a database containing all clinical BMD results for the Province of Manitoba, Canada. 2,356 of the women satisfied a well-validated definition for diabetes, the vast majority of whom (>90%) would have T2D. LS L14 TBS was derived for each spine DXA examination blinded to clinical parameters and outcomes. Health service records were assessed for incident non-traumatic major osteoporotic fracture codes (mean follow-up 4.7 years). Results:In linear regression adjusted for FRAX risk factors (age,BMI, glucocorticoids, prior major fracture, rheumatoid arthritis, COPD as a smoking proxy, alcohol abuse) and osteoporosis therapy, diabetes was associated with higher BMD for LS, femoral neck and total hip but lower LS TBS (all p<0.001). Similar results were seen after excluding obese subjects withBMI>30. In logistic regression (Figure), the adjusted odds ratio (OR) for a skeletal measurement in the lowest vs highest tertile was less than 1 for all BMD measurements but increased for LS TBS (adjusted OR 2.61, 95%CI 2.30-2.97). Major osteoporotic fractures were identified in 175 (7.4%) with and 1,493 (5.5%) without diabetes (p < 0.001). LS TBS predicted fractures in those with diabetes (adjusted HR 1.27, 95%CI 1.10-1.46) and without diabetes (HR 1.31, 95%CI 1.24-1.38). LS TBS was an independent predictor of fracture (p<0.05) when further adjusted for BMD (LS, femoral neck or total hip). The explanatory effect of diabetes in the fracture prediction model was greatly reduced when LS TBS was added to the model (indicating that TBS captured a large portion of the diabetes-associated risk), but was paradoxically increased from adding any of the BMD measurements. Conclusions:Lumbar spine TBS is sensitive to skeletal deterioration in postmenopausal women with diabetes, whereas BMD is paradoxically greater. LS TBS predicts osteoporotic fractures in those with diabetes, and captures a large portion of the diabetes-associated fracture risk. Combining LS TBS with BMD incrementally improves fracture prediction.

A new early and automated MRI-based predictor of motor improvement after stroke.

OBJECTIVES: In this study, we investigated the structural plasticity of the contralesional motor network in ischemic stroke patients using diffusion magnetic resonance imaging (MRI) and explored a model that combines a MRI-based metric of contralesional network integrity and clinical data to predict functional outcome at 6 months after stroke. METHODS: MRI and clinical examinations were performed in 12 patients in the acute phase, at 1 and 6 months after stroke. Twelve age- and gender-matched controls underwent 2 MRIs 1 month apart. Structural remodeling after stroke was assessed using diffusion MRI with an automated measurement of generalized fractional anisotropy (GFA), which was calculated along connections between contralesional cortical motor areas. The predictive model of poststroke functional outcome was computed using a linear regression of acute GFA measures and the clinical assessment. RESULTS: GFA changes in the contralesional motor tracts were found in all patients and differed significantly from controls (0.001 ≤ p < 0.05). GFA changes in intrahemispheric and interhemispheric motor tracts correlated with age (p ≤ 0.01); those in intrahemispheric motor tracts correlated strongly with clinical scores and stroke sizes (p ≤ 0.001). GFA measured in the acute phase together with a routine motor score and age were a strong predictor of motor outcome at 6 months (r(2) = 0.96, p = 0.0002). CONCLUSION: These findings represent a proof of principle that contralesional diffusion MRI measures may provide reliable information for personalized rehabilitation planning after ischemic motor stroke. Neurology® 2012;79:39-46.

Birth weight, weight change, and blood pressure during childhood and adolescence: a school-based multiple cohort study.

OBJECTIVE: We assessed the association between birth weight, weight change, and current blood pressure (BP) across the entire age-span of childhood and adolescence in large school-based cohorts in the Seychelles, an island state in the African region. METHODS: Three cohorts were analyzed: 1004 children examined at age 5.5 and 9.1 years, 1886 children at 9.1 and 12.5, and 1575 children at 12.5 and 15.5, respectively. Birth and 1-year anthropometric data were gathered from medical files. The outcome was BP at age 5.5, 9.1, 12.5 or 15.5 years, respectively. Conditional linear regression analysis was used to estimate the relative contribution of changes in weight (expressed in z-score) during different age periods on BP. All analyses were adjusted for height. RESULTS: At all ages, current BP was strongly associated with current weight. Birth weight was not significantly associated with current BP. Upon adjustment for current weight, the association between birth weight and current BP tended to become negative. Conditional linear regression analyses indicated that changes in weight during successive age periods since birth contributed substantially to current BP at all ages. The strength of the association between weight change and current BP increased throughout successive age periods. CONCLUSION: Weight changes during any age period since birth have substantial impact on BP during childhood and adolescence, with BP being more responsive to recent than earlier weight changes.

Adaptability and stability of white oat cultivars in relation to chemical composition of the caryopsis

The objective of this work was to characterize the chemical properties of white oat (Avena sativa) caryopsis and to determine the adaptability and stability of cultivars recommended for cultivation in the state of Rio Grande do Sul, Brazil. The trials were carried out in the 2007, 2008 and 2009 crop seasons, in three municipalities: Augusto Pestana, Capão do Leão, and Passo Fundo. Fifteen cultivars were evaluated in a randomized block design, with four replicates. The contents of protein, lipid, and nitrogen-free extract were evaluated in the caryopsis. Cultivar performances for the measured characters varied according to location and year of cultivation. The cultivar URS Guapa showed high content of nitrogen-free extract and low contents of protein and lipid in the caryopsis. 'FAPA Louise' showed high content of lipid, whereas 'Albasul', 'UPF 15', and 'UPF 18' showed high content of protein and low content of nitrogen-free extract. There is no evidence of an ideal biotype for the evaluated characters, which could simultaneously show high average performance, adaptability to favorable and unfavorable environments, and stability.

Longer term clinical and virological outcome of sub-Saharan African participants on antiretroviral treatment in the Swiss HIV Cohort Study.

OBJECTIVES: Persons from sub-Saharan Africa (SSA) are increasingly enrolled in the Swiss HIV Cohort Study (SHCS). Cohorts from other European countries showed higher rates of viral failure among their SSA participants. We analyzed long-term outcomes of SSA versus North Western European participants. DESIGN: We analyzed data of the SHCS, a nation-wide prospective cohort study of HIV-infected adults at 7 sites in Switzerland. METHODS: SSA and North Western European participants were included if their first treatment combination consisted of at least 3 antiretroviral drugs (cART), if they had at least 1 follow-up visit, did not report active injecting drug use, and did not start cART with CD4 counts >200 cells per microliter during pregnancy. Early viral response, CD4 cell recovery, viral failure, adherence, discontinuation from SHCS, new AIDS-defining events, and survival were analyzed using linear regression and Cox proportional hazard models. RESULTS: The proportion of participants from SSA within the SHCS increased from 2.6% (<1995) to 20.8% (2005-2009). Of 4656 included participants, 808 (17.4%) were from SSA. Early viral response (6 months) and rate of viral failure in an intent-to-stay-on-cART approach were similar. However, SSA participants had a higher risk of viral failure on cART (adjusted hazard ratio: 2.03, 95% confidence interval: 1.50 to 2.75). Self-reported adherence was inferior for SSA. There was no increase of AIDS-defining events or mortality in SSA participants. CONCLUSIONS: Increased attention must be given to factors negatively influencing adherence to cART in participants from SSA to guarantee equal longer-term results on cART.

Quantitative modelling of transcription factor binding sites

Abstract One of the most important issues in molecular biology is to understand regulatory mechanisms that control gene expression. Gene expression is often regulated by proteins, called transcription factors which bind to short (5 to 20 base pairs),degenerate segments of DNA. Experimental efforts towards understanding the sequence specificity of transcription factors is laborious and expensive, but can be substantially accelerated with the use of computational predictions. This thesis describes the use of algorithms and resources for transcriptionfactor binding site analysis in addressing quantitative modelling, where probabilitic models are built to represent binding properties of a transcription factor and can be used to find new functional binding sites in genomes. Initially, an open-access database(HTPSELEX) was created, holding high quality binding sequences for two eukaryotic families of transcription factors namely CTF/NF1 and LEFT/TCF. The binding sequences were elucidated using a recently described experimental procedure called HTP-SELEX, that allows generation of large number (> 1000) of binding sites using mass sequencing technology. For each HTP-SELEX experiments we also provide accurate primary experimental information about the protein material used, details of the wet lab protocol, an archive of sequencing trace files, and assembled clone sequences of binding sequences. The database also offers reasonably large SELEX libraries obtained with conventional low-throughput protocols.The database is available at http://wwwisrec.isb-sib.ch/htpselex/ and and ftp://ftp.isrec.isb-sib.ch/pub/databases/htpselex. The Expectation-Maximisation(EM) algorithm is one the frequently used methods to estimate probabilistic models to represent the sequence specificity of transcription factors. We present computer simulations in order to estimate the precision of EM estimated models as a function of data set parameters(like length of initial sequences, number of initial sequences, percentage of nonbinding sequences). We observed a remarkable robustness of the EM algorithm with regard to length of training sequences and the degree of contamination. The HTPSELEX database and the benchmarked results of the EM algorithm formed part of the foundation for the subsequent project, where a statistical framework called hidden Markov model has been developed to represent sequence specificity of the transcription factors CTF/NF1 and LEF1/TCF using the HTP-SELEX experiment data. The hidden Markov model framework is capable of both predicting and classifying CTF/NF1 and LEF1/TCF binding sites. A covariance analysis of the binding sites revealed non-independent base preferences at different nucleotide positions, providing insight into the binding mechanism. We next tested the LEF1/TCF model by computing binding scores for a set of LEF1/TCF binding sequences for which relative affinities were determined experimentally using non-linear regression. The predicted and experimentally determined binding affinities were in good correlation.

Results of An International Study of Quantitative BCR/ABL Assays Using Defined RNA Samples

Molecular monitoring of BCR/ABL transcripts by real time quantitative reverse transcription PCR (qRT-PCR) is an essential technique for clinical management of patients with BCR/ABL-positive CML and ALL. Though quantitative BCR/ABL assays are performed in hundreds of laboratories worldwide, results among these laboratories cannot be reliably compared due to heterogeneity in test methods, data analysis, reporting, and lack of quantitative standards. Recent efforts towards standardization have been limited in scope. Aliquots of RNA were sent to clinical test centers worldwide in order to evaluate methods and reporting for e1a2, b2a2, and b3a2 transcript levels using their own qRT-PCR assays. Total RNA was isolated from tissue culture cells that expressed each of the different BCR/ABL transcripts. Serial log dilutions were prepared, ranging from 100 to 10-5, in RNA isolated from HL60 cells. Laboratories performed 5 independent qRT-PCR reactions for each sample type at each dilution. In addition, 15 qRT-PCR reactions of the 10-3 b3a2 RNA dilution were run to assess reproducibility within and between laboratories. Participants were asked to run the samples following their standard protocols and to report cycle threshold (Ct), quantitative values for BCR/ABL and housekeeping genes, and ratios of BCR/ABL to housekeeping genes for each sample RNA. Thirty-seven (n=37) participants have submitted qRT-PCR results for analysis (36, 37, and 34 labs generated data for b2a2, b3a2, and e1a2, respectively). The limit of detection for this study was defined as the lowest dilution that a Ct value could be detected for all 5 replicates. For b2a2, 15, 16, 4, and 1 lab(s) showed a limit of detection at the 10-5, 10-4, 10-3, and 10-2 dilutions, respectively. For b3a2, 20, 13, and 4 labs showed a limit of detection at the 10-5, 10-4, and 10-3 dilutions, respectively. For e1a2, 10, 21, 2, and 1 lab(s) showed a limit of detection at the 10-5, 10-4, 10-3, and 10-2 dilutions, respectively. Log %BCR/ABL ratio values provided a method for comparing results between the different laboratories for each BCR/ABL dilution series. Linear regression analysis revealed concordance among the majority of participant data over the 10-1 to 10-4 dilutions. The overall slope values showed comparable results among the majority of b2a2 (mean=0.939; median=0.9627; range (0.399 - 1.1872)), b3a2 (mean=0.925; median=0.922; range (0.625 - 1.140)), and e1a2 (mean=0.897; median=0.909; range (0.5174 - 1.138)) laboratory results (Fig. 1-3)). Thirty-four (n=34) out of the 37 laboratories reported Ct values for all 15 replicates and only those with a complete data set were included in the inter-lab calculations. Eleven laboratories either did not report their copy number data or used other reporting units such as nanograms or cell numbers; therefore, only 26 laboratories were included in the overall analysis of copy numbers. The median copy number was 348.4, with a range from 15.6 to 547,000 copies (approximately a 4.5 log difference); the median intra-lab %CV was 19.2% with a range from 4.2% to 82.6%. While our international performance evaluation using serially diluted RNA samples has reinforced the fact that heterogeneity exists among clinical laboratories, it has also demonstrated that performance within a laboratory is overall very consistent. Accordingly, the availability of defined BCR/ABL RNAs may facilitate the validation of all phases of quantitative BCR/ABL analysis and may be extremely useful as a tool for monitoring assay performance. Ongoing analyses of these materials, along with the development of additional control materials, may solidify consensus around their application in routine laboratory testing and possible integration in worldwide efforts to standardize quantitative BCR/ABL testing.

Étude des mécanismes de transfert des fibres en sciences forensiques

RESUME Les fibres textiles sont des produits de masse utilisés dans la fabrication de nombreux objets de notre quotidien. Le transfert de fibres lors d'une action délictueuse est dès lors extrêmement courant. Du fait de leur omniprésence dans notre environnement, il est capital que l'expert forensique évalue la valeur de l'indice fibres. L'interprétation de l'indice fibres passe par la connaissance d'un certain nombre de paramètres, comme la rareté des fibres, la probabilité de leur présence par hasard sur un certain support, ainsi que les mécanismes de transfert et de persistance des fibres. Les lacunes les plus importantes concernent les mécanismes de transfert des fibres. A ce jour, les nombreux auteurs qui se sont penchés sur le transfert de fibres ne sont pas parvenus à créer un modèle permettant de prédire le nombre de fibres que l'on s'attend à retrouver dans des circonstances de contact données, en fonction des différents paramètres caractérisant ce contact et les textiles mis en jeu. Le but principal de cette recherche est de démontrer que la création d'un modèle prédictif du nombre de fibres transférées lors d'un contact donné est possible. Dans le cadre de ce travail, le cas particulier du transfert de fibres d'un tricot en laine ou en acrylique d'un conducteur vers le dossier du siège de son véhicule a été étudié. Plusieurs caractéristiques des textiles mis en jeu lors de ces expériences ont été mesurées. Des outils statistiques (régression linéaire multiple) ont ensuite été utilisés sur ces données afin d'évaluer l'influence des caractéristiques des textiles donneurs sur le nombre de fibres transférées et d'élaborer un modèle permettant de prédire le nombre de fibres qui vont être transférées à l'aide des caractéristiques influençant significativement le transfert. Afin de faciliter la recherche et le comptage des fibres transférées lors des expériences de transfert, un appareil de recherche automatique des fibres (liber finder) a été utilisé dans le cadre de cette recherche. Les tests d'évaluation de l'efficacité de cet appareil pour la recherche de fibres montrent que la recherche automatique est globalement aussi efficace qu'une recherche visuelle pour les fibres fortement colorées. Par contre la recherche automatique perd de son efficacité pour les fibres très pâles ou très foncées. Une des caractéristiques des textiles donneurs à étudier est la longueur des fibres. Afin de pouvoir évaluer ce paramètre, une séquence d'algorithmes de traitement d'image a été implémentée. Cet outil permet la mesure de la longueur d'une fibre à partir de son image numérique à haute résolution (2'540 dpi). Les tests effectués montrent que les mesures ainsi obtenues présentent une erreur de l'ordre du dixième de millimètre, ce qui est largement suffisant pour son utilisation dans le cadre de cette recherche. Les résultats obtenus suite au traitement statistique des résultats des expériences de transfert ont permis d'aboutir à une modélisation du phénomène du transfert. Deux paramètres sont retenus dans le modèle: l'état de la surface du tissu donneur et la longueur des fibres composant le tissu donneur. L'état de la surface du tissu est un paramètre tenant compte de la quantité de fibres qui se sont détachées de la structure du tissu ou qui sont encore faiblement rattachées à celle-ci. En effet, ces fibres sont les premières à se transférer lors d'un contact, et plus la quantité de ces fibres par unité de surface est importante, plus le nombre de fibres transférées sera élevé. La longueur des fibres du tissu donneur est également un paramètre important : plus les fibres sont longues, mieux elles sont retenues dans la structure du tissu et moins elles se transféreront. SUMMARY Fibres are mass products used to produce numerous objects encountered everyday. The transfer of fibres during a criminal action is then very common. Because fibres are omnipresent in our environment, the forensic expert has to evaluate the value of the fibre evidence. To interpret fibre evidence, the expert has to know some parameters as frequency of fibres,' probability of finding extraneous fibres by chance on a given support, and transfer and persistence mechanisms. Fibre transfer is one of the most complex parameter. Many authors studied fibre transfer mechanisms but no model has been created to predict the number of fibres transferred expected in a given type of contact according to parameters as characteristics of the contact and characteristics of textiles. The main purpose of this research is to demonstrate that it is possible to create a model to predict the number of fibres transferred during a contact. In this work, the particular case of the transfer of fibres from a knitted textile in wool or in acrylic of a driver to the back of a carseat has been studied. Several characteristics of the textiles used for the experiments were measured. The data obtained were then treated with statistical tools (multiple linear regression) to evaluate the influence of the donor textile characteristics on the number of úbers transferred, and to create a model to predict this number of fibres transferred by an equation containing the characteristics having a significant influence on the transfer. To make easier the searching and the counting of fibres, an apparatus of automatic search. of fibers (fiber finder) was used. The tests realised to evaluate the efficiency of the fiber finder shows that the results obtained are generally as efficient as for visual search for well-coloured fibres. However, the efficiency of automatic search decreases for pales and dark fibres. One characteristic of the donor textile studied was the length of the fibres. To measure this parameter, a sequence of image processing algorithms was implemented. This tool allows to measure the length of a fibre from it high-resolution (2'540 dpi) numerical image. The tests done shows that the error of the measures obtained are about some tenths of millimetres. This precision is sufficient for this research. The statistical methods applied on the transfer experiment data allow to create a model of the transfer phenomenon. Two parameters are included in the model: the shedding capacity of the donor textile surface and the length of donor textile fibres. The shedding capacity of the donor textile surface is a parameter estimating the quantity of fibres that are not or slightly attached to the structure of the textile. These fibres are easily transferred during a contact, and the more this quantity of fibres is high, the more the number of fibres transferred during the contact is important. The length of fibres is also an important parameter: the more the fibres are long, the more they are attached in the structure of the textile and the less they are transferred during the contact.

Dimethylarginines, homocysteine metabolism, and cerebrospinal fluid markers for Alzheimer's disease.

Dimethylarginine and homocysteine metabolism are closely linked and alterations of both were observed in plasma and cerebrospinal fluid (CSF) of patients with Alzheimer's disease (AD). CSF parameters of homocysteine metabolism have recently been found to be associated with the CSF level of the AD biomarker phosphorylated tau (ptau) in AD patients. To investigate possible relationships between homocysteine and dimethylarginine metabolism and the AD CSF biomarkers ptau181 and amyloid-β 1-42 (Aβ42), we assessed parameters of homocysteine metabolism (CSF homocysteine, S-adenosylmethionine (SAM), S-adenosylhomocysteine (SAH), 5-methyltetrahydrofolate (5-MTHF)) and dimethylarginine metabolism (plasma and CSF asymmetric dimethylarginine (ADMA), symmetric dimethylarginine, L-arginine) as well as CSF Aβ42 and ptau181 in 98 controls and 51 AD patients. Multivariate linear regression analyses were performed to assess associations between the considered parameters. SAH concentrations show significant associations to CSF ADMA levels, and CSF ADMA and L-arginine to ptau181, but not to Aβ42 concentrations in AD patients. When including concentrations of homocysteine, 5-MTHF, SAM, and SAH into the analysis, CSF ADMA concentrations independently predicted ptau181 levels in AD patients but homocysteine-related metabolites were associated with ptau181 only when ADMA was removed from the analysis model. These results suggest that CSF ADMA may interact with CNS homocysteine metabolism and may contribute to neurodegeneration and accumulation of phosphorylated tau in AD. Functional and interventional studies are needed to further proof this hypothesis.

Simultaneous measurement of regional cerebral blood flow by perfusion CT and stable xenon CT: a validation study.

BACKGROUND AND PURPOSE: Knowledge of cerebral blood flow (CBF) alterations in cases of acute stroke could be valuable in the early management of these cases. Among imaging techniques affording evaluation of cerebral perfusion, perfusion CT studies involve sequential acquisition of cerebral CT sections obtained in an axial mode during the IV administration of iodinated contrast material. They are thus very easy to perform in emergency settings. Perfusion CT values of CBF have proved to be accurate in animals, and perfusion CT affords plausible values in humans. The purpose of this study was to validate perfusion CT studies of CBF by comparison with the results provided by stable xenon CT, which have been reported to be accurate, and to evaluate acquisition and processing modalities of CT data, notably the possible deconvolution methods and the selection of the reference artery. METHODS: Twelve stable xenon CT and perfusion CT cerebral examinations were performed within an interval of a few minutes in patients with various cerebrovascular diseases. CBF maps were obtained from perfusion CT data by deconvolution using singular value decomposition and least mean square methods. The CBF were compared with the stable xenon CT results in multiple regions of interest through linear regression analysis and bilateral t tests for matched variables. RESULTS: Linear regression analysis showed good correlation between perfusion CT and stable xenon CT CBF values (singular value decomposition method: R(2) = 0.79, slope = 0.87; least mean square method: R(2) = 0.67, slope = 0.83). Bilateral t tests for matched variables did not identify a significant difference between the two imaging methods (P >.1). Both deconvolution methods were equivalent (P >.1). The choice of the reference artery is a major concern and has a strong influence on the final perfusion CT CBF map. CONCLUSION: Perfusion CT studies of CBF achieved with adequate acquisition parameters and processing lead to accurate and reliable results.

Kaasun jakauma paineellisissa sulpunkäsittelylaitteissa

Työn tarkoituksena oli tutkia kuinka kaasukuplat jakautuvat sellususpensioon, kun prosessiolosuhteita muutetaan. Kuplien kokojakauman avulla pyritään kartoittamaan kuinka kaasukuplat pilkkoutuvat ja onko olemassa raja-arvoa, milloin tehon lisäys ei enää pilko sellususpensiossa olevia kuplia pienemmiksi. Jakaumien avulla voidaan mahdollisesti kehittää kaasunpoistoa. Työssä selvitettiin voidaanko kameratekniikkaa käyttää kuplakokojen määrittämiseen sellusulpusta. Läpinäkymätön sellumassa tarjoaa kuvaukselle haasteellisen ympäristön. Myöskään kirjallisuudessa ei vastaavaa menetelmää aikaisemmin oltu käytetty. Kuvatusta materiaalista laskettiin kuplien halkaisijat, joita pyrittiin tarkastelemaan tilastollisesti. Tilastollinen tarkastelu toi eroja mittauspisteiden välille. Kuplien halkaisijoiden perusteella mallinnettiin kuplakokoon vaikuttavat prosessisuureet lineaarisella regressioanalyysillä. Mallinnuksen perusteella saatiinvasteisiin vaikuttavat riippumattomat muuttujat ja niiden matemaattiset malliyhtälöt. Tuloksina saatiin selville, että kuplien kokojakaumissa on eroja sekoitussäiliön eri puolilla. Sekoitussäiliössä suurten kuplien suhteellinen osuus kasvaa kaasupitoisuuden ja sakeuden noustessa. Mallinnuksen tärkeimpänä tuloksena voidaan todeta, että sakeus ja kaasutilavuus vaikuttavat kuplakokoon kasvattavasti. Kierrosnopeuden kasvattaminen pienentää kuplakokoa. Visuaalisen informaation avulla on helpompi ymmärtää kuinka kuplat käyttäytyvät.

Short-term increase in particulate matter blunts nocturnal blood pressure dipping and daytime urinary sodium excretion

Short-term exposure to ambient particulate matter with aerodynamic diameters<10 µm were found to be positively associated with blood pressure. Yet, little information exists regarding the association between particles and circadian rhythm of blood pressure. Hence, we analyzed the association of exposure to particulate matter with aerodynamic diameters<10 µm on the day of examination and ≤7 days before with ambulatory blood pressure and with sodium excretion in 359 adults from the general population using multiple linear regression. After controlling for potential confounders, a 10-µg/m3 increase in particulate matter with aerodynamic diameters<10 µm levels was associated with nighttime systolic blood pressure (β=1.32 mm Hg 95% CI, 0.06-2.58 mm Hg at lag 0; P=0.04), nighttime diastolic blood pressure (0.72 mm Hg 95% CI, 0.03-1.42 mm Hg at lag 2; P=0.04), nocturnal systolic blood pressure dipping (-0.96 mm Hg 95% CI, -1.89 to -0.03 mm Hg at lag 0; P=0.044), and daytime urinary sodium excretion (-0.05 log-mmol/min 95% CI, -0.10 to -0.01 log-mmol/min at lag 0; P=0.027) but not with nighttime sodium excretion. The associations with blood pressure rapidly diminished with increasing lag days, and the associations with daytime sodium excretion were maximal with particulate matter with aerodynamic diameters<10 µm in exposures 2 to 5 days before. The associations of short-term increases in particulate matter with aerodynamic diameters<10 µm with higher nighttime blood pressure and blunted systolic blood pressure dipping were preceded by associations with reduced ability of the kidney to excrete sodium during daytime. The underlying mechanism linking air pollution to increased cardiovascular risk may include disturbed circadian rhythms of renal sodium handling and blood pressure.

Three-Dimensional (3D) Microarchitecture Correlations with 2D Projection Image Gray-Level Variations Assessed by Trabecular Bone Score Using High-Resolution Computed Tomographic Acquisitions: Effects of Resolution and Noise.

The aim of the present study is to determine the level of correlation between the 3-dimensional (3D) characteristics of trabecular bone microarchitecture, as evaluated using microcomputed tomography (μCT) reconstruction, and trabecular bone score (TBS), as evaluated using 2D projection images directly derived from 3D μCT reconstruction (TBSμCT). Moreover, we have evaluated the effects of image degradation (resolution and noise) and X-ray energy of projection on these correlations. Thirty human cadaveric vertebrae were acquired on a microscanner at an isotropic resolution of 93μm. The 3D microarchitecture parameters were obtained using MicroView (GE Healthcare, Wauwatosa, MI). The 2D projections of these 3D models were generated using the Beer-Lambert law at different X-ray energies. Degradation of image resolution was simulated (from 93 to 1488μm). Relationships between 3D microarchitecture parameters and TBSμCT at different resolutions were evaluated using linear regression analysis. Significant correlations were observed between TBSμCT and 3D microarchitecture parameters, regardless of the resolution. Correlations were detected that were strongly to intermediately positive for connectivity density (0.711≤r(2)≤0.752) and trabecular number (0.584≤r(2)≤0.648) and negative for trabecular space (-0.407 ≤r(2)≤-0.491), up to a pixel size of 1023μm. In addition, TBSμCT values were strongly correlated between each other (0.77≤r(2)≤0.96). Study results show that the correlations between TBSμCT at 93μm and 3D microarchitecture parameters are weakly impacted by the degradation of image resolution and the presence of noise.