Wavelength Coded Optical Time-Domain Reflectometry

This paper presents a wavelength coded optical timedomain reflectometry based on optical heterodyne technique. In this scheme, the probe and reference optical pulses have different wavelengths. This enables optical heterodyne detection to be used to improve the system performances significantly. We demonstrate a spatial resolution of 2.5 m within a range of 60 km in weak-reflection signal detection and direct observation of Brillouin scattering over a long optical fiber, suggesting online fiber sensing possible. The principle of wavelength coding is applicable to other systems like lidar and radar to increase receiver sensitivity and simplify system structure.

细胞粘附力敏感性的微观力学模型

<正>Focal adhesions(FAs)are large,multiprotein complexs that provides linkers between cytoskeleton to the extracellular matrix(ECM).Cells sense and respond to forces through

中国水蚀土壤抗剪强度研究

利用野外测试数据、土壤样品的室内理化分析数据和参考文献数据 ,对水蚀区范围内水土流失过程中的土壤抗剪强度进行了初步研究 ,建立了中国水土流失土壤抗剪强度的回归模型 ,总结出水蚀区范围内水蚀过程中有关土壤抗剪强度的 3条结论 :影响水土流失过程中土壤抗剪强度的主导因素是容重、粉 /黏、土壤含水量、土壤有机质含量 ;抗剪强度随土壤类型发生有规律的变化 ;抗剪强度在中国水蚀区范围内有较明显的空间分异规律 (包括水平分异规律和垂直剖面构型规律 )

CIAC COMPREHENSIVE INFORMATION-SYSTEM OF RARE-EARTHS

The CIAC (Changchun Institute of Applied Chemistry) Comprehensive information System of Rare Earths is composed of three subsystems, namely, extraction data, physicochemical properties, and reference data. This paper describes the databases pertaining to the extraction of rare earths and their physicochemical properties and discusses the relationships between data retrieval and optimization and between the structures of the extractants and the efficiency with which they are extracted. Expert systems for rare earth extraction and calculation of thermodynamic parameters are described, and an application of pattern recognition to the problems of classification of compounds of the rare earths and prediction of their properties is reported.

潮波模型的优化开边界方法研究

数值模式是潮波研究的一种有利手段，但在研究中会面临各种具体问题，包括开边界条件的确定、底摩擦系数和耗散系数的选取等。数据同化是解决这些问题的一种途径，即利用有限数量的潮汐观测资料对潮波进行最优估计，其根本目的是迫使模型预报值逼近观测值，使模式不要偏离实际情况太远。本文采用了一种优化开边界方法，沿着数值模型的开边界优化潮汐水位信息，目的是设法使数值解在动力约束的意义下接近观测值，获得研究区域的潮汐结果。边界值由指定优化问题的解来定，以提高模拟区域的潮汐精度，最优问题的解是基于通过开边界的能量通量的变化，处理开边界处的观测值与计算值之差的最小化。这里提供了辐射型边界条件，由Reid 和Bodine（本文简称为RB）推导，我们将采用的优化后的RB方法（称为ORB）是优化开边界的特殊情况。 本文对理想矩形海域（ E- E， N- N， 分辨率 ）进行了潮波模拟，有东部开边界，模式采用ECOM3D模式。对数据结果的误差分析采用，振幅平均偏差，平均绝对偏差，平均相对误差和均方根偏差四个值来衡量模拟结果的好坏程度。 需要优化入开边界的解析潮汐值本文采用的解析解由方国洪《海湾的潮汐与潮流》（1966年）方法提供，为验证本文所做的解析解和方文的一致，本文做了其第一个例子的关键值a,b,z,结果与其结果吻合的相当好。但略有差别，分析的可能原因是两法在具体迭代方案和计算机保留小数上有区别造成微小误差。另外，我们取m=20，得到更精确的数值，我们发现对前十项的各项参数值，取m=10,m=20各项参数略有改进。当然我们可以获得m更大的各项参数值。 同时为了检验解析解的正确性讨论m和l变化对边界值的影响，结果指出，增大m，m=20时，u的模最大在本身u1或u2的模的6%；m=100时，u的模最大在本身u1或u2的模的4%；m再增大，m=1000时，u的模最大在本身u1或u2的模的4%，改变不大。当l<1时， =0处u的模最大为2。当l=1时， =0处u的模最大为0.1，当l>1时，l越大，u的模越小，当l=10时，u的模最大为0.001，可以认为为0。 为检验该优化方法的应用情况，我们对理想矩形区域进行模拟，首先将本文所采用的优化开边界方法应用于30m的情况，在开边界优化入开边界得出模式解，所得模拟结果与解析解吻合得相当好，该模式解和解析解在整个区域上，振幅平均绝对偏差为9.9cm,相位平均绝对偏差只有4.0 ，均方根偏差只有13.3cm，说明该优化方法在潮波模型中有效。 为验证该优化方法在各种条件下的模拟结果情况，在下面我们做了三类敏感性试验： 第一类试验：为证明在开边界上使用优化方法相比于没有采用优化方法的模拟解更接近于解析解，我们来比较ORB条件与RB条件的优劣，我们模拟用了两个不同的摩擦系数，k分别为：0,0.00006。 结果显示，针对不同摩擦系数，显示在开边界上使用ORB条件的解比使用RB条件的解无论是振幅还是相位都有显著改善，两个试验均方根偏差优化程度分别为84.3%，83.7%。说明在开边界上使用优化方法相比于没有采用优化方法的模拟解更接近于解析解，大大提高了模拟水平。上述的两个试验得出， k=0.00006优化结果比k=0的好。 第二类试验，使用ORB条件确定优化开边界情况下，在东西边界加入出入流的情况，流考虑线性和非线性情况，结果显示，加入流的情况，潮汐模拟的效果降低不少，流为1Sv的情况要比5Sv的情况均方根偏差相差20cm,而不加流的情况只有0.2cm。线性流和非线性流情况两者模式解相差不大，振幅，相位各项指数都相近, 说明流的线性与否对结果影响不大。 第三类试验，不仅在开边界使用ORB条件，在模式内部也使用ORB条件，比较了内部优化和不优化情况与解析解的偏差。结果显示，选用不同的k,振幅都能得到很好的模拟，而相位相对较差。另外，在内部优化的情况下，考虑不同的k的模式解， 我们选用了与解析解相近的6个模式解的k,结果显示，不同的k,振幅都能得到很好的模拟，而相位较差。 总之，在开边界使用ORB条件比使用RB条件好，振幅相位都有大幅度改进，在加入出入流情况下，流的大小对模拟结果有影响，但线形流和非线性流差别不大。内部优化的结果显示，模式采用不同的k都能很好模拟解析解的振幅。

CIM思想指导下的工业自动化总体技术

工业自动化总体技术是在ＣＩＭ思想指导下产生的实施ＣＩＭ的关键技术。总体技术的核心是总体设计与总体集成技术。本文言及总体技术产生的背景，其宗旨与含义，总体技术方法学，工业自动化系统体系结构与参考模型，以及实践总体技术的概况动向。

基于意象知识的消歧体系

本文提出了一种可以表示常识及语言知识的意象知识体系。在这种知识的形式化表示基础上,给出了NLP中的消歧知识及其表示形式,以及基于消歧知识的消歧策略。最后,论述了这种方法实现上的可行性。

改造型盆地油气成藏机理与油气预测－以银根－额济纳旗盆地为例

Reformed basin is a basin that underwent multiple immense reformation after the sedimentary stage, the major geologic elements of the petroleum system in the prototyped basin are destroyed to a certain extent, and their petroleum system has been reconstructed. This type of basin is frequently found in the course of exploration both home and abroad. In China, especially in the western and southern part of China, the basins in which oil explorations have been conducted are mostly reformed basins. The reformed basins from Paleozoic, Late Mesozoic to Cenozoic are widely distributed in West and South China. They are, and moreover, will be a challenge for oil and gas exploration. The conventional investigation and exploration techniques used in the slightly reconstructed basin just don't work well when facing the reformed basin. Therefore, the study on the reformed basin, especially the study on the pool-forming mechanism and reservoir prediction becomes a focus and one of difficulties for the geologists overseas and domestic. Yingen-Ejinaqi Basin is a typical case of the Late Mesozoic and Cenozoic reformed basins in China. It locates in West China and is a exploration frontier with difficulties and no break through is made for years. A comprehensive research on it will be of significance for oil and gas exploration in similar basins of China. The late research for reformed basin in China now is mainly concentrated on basin classification, formation mechanism, geologic features, and survey technique, distribution regularity of oil accumulation and its dominating factors, assessment of oil exploration prospect and target zones, etc. On the other hand, the study on the pool-forming mechanism and reservoir prediction seems insufficient in systematization, and the research is deficient in methodology and combination of qualitative and quantitative studies, as well as the application of the new theory and techniques. The current efforts are mainly directed to structures (faults), sedimentation, the relationship between reservoir evolution and oil accumulation, and some other relevant fields. However, the application of the new theory and techniques seems to be insufficient such as petroleum system, pool-forming dynamics, fluid pressure compartment, and basin simulation, etc. So is the dynamic and integrated research. As a result, incomplete knowledge and understandings derived from the research on pool-forming mechanism and reservoir prediction often do not accord with rea-lity of the basin. The study and exploration under the guidance of this knowledge will inevitably lead to errors and failure. This paper, based on the previous study of the other geologists on reformed basins, with emphasis on "wholeness or systematic, dynamic and integrated" research, presents a reverse thinking of beginning from conserved units in the basin and the combination of qualitative and quantitative study with new theory and technique by building a geological model. The paper also puts forward a new thought for studying the oil & gas accumulation and reservoir prediction , and establishes a new research system for reformed basin. It is verified by the known reservoir and oil accumulation area in the basin and has a practical value for use and reference. The new ideas and achievements in this research are as following: 1.This is the first time that the system for studying the reformed basin and its pool-forming mechanism and reservoir prediction is presented. A reverse thinking and combination of qualitative & quantitative are applied here with emphasis on "wholeness or systematic, dynamic and integrated" research, new theory, techniques & methods comprehensive use and geologic models building. 2. Identifying criterion and methods, classifying schemes, and denominating principles for the conserved units of reformed basins are presented in this paper. The geologic model of conserved units of Yingen-Ejinaqi Basin has been built. It is a practical method when combined with the traditional way for basin survey and the conserved units study. 3.The dynamic sources of basin deformation are believed to be stress, gravity and thermodynamics. The stress and gravity are key factors in basin deformation and pool forming, especially stress. Scientific proof is provided by classifying the functional type, style and range of the stress, gravity and thermodynamics. 4.The pool forming and reservoir distribution of Yingen-Ejinaqi Basin are controlled by multiple factors or geologic conditions or/and co-controlled by both of them. The qualitative and quantitative research on petroleum system and basin modeling will help us understand and determine the pool-forming period of the conserved unit (timing), the oil migrating direction (orientation), the oil accumulating region (location), the oil distributing border (bordering) and the size of oil accumulation (quantification). Thus the pool-forming and distribution zones can be predicted. 5.Three generating modes (reform-succession type, reform-destroyed type and reform-regenerating type or reform-newborn type) of pool forming for reformed basins are presented here, together with the inner relationships between basin deformation type, overlapping style and pool-forming modes. The pool-forming modes are determined by deformation type and overlapping style. Reservoir distribution will be predicted based on the modes and other concrete pool-forming conditions. 6.The evaluation methods of the conserved units and zones and the parameter selection are reliable in optimal selecting of target zones. The technical terms, new ideas and methods for the study of reformed basins, the pool-forming mechanism and reservoir prediction are presented in this paper. The concepts and terms, the identifying criterion, the denominating principles, the generating modes for pool forming, the methods of reservoir prediction, and the evaluation techniques for conserved units and zones can be used for reference in studies on the petroleum exploration of reformed basins in China and abroad. It serves as a typical example for further research of the reformed basins and the geologic regulations of oil accumulation. It has a practical value of use and reference. The future research in the field of pool-forming mechanism of the reformed basins may well be on the process simulation of pool-forming dynamics of the reformed basins. Experimental work has been conducted to simulate the processes by using quantitative and qualitative methods combined. The further study in this field calls for more efforts.

人口空间数据误差分析研究

Spatial population data, obtained through the pixeling method, makes many related researches more convenient. However, the limited methods of precision analysis prevent the spread of spatial distribution methods and cumber the application of the spatial population data. This paper systematically analyzes the different aspects of the spatial population data precision, and re-calculates them with the reformed method, which makes breakthrough for the spread of the pixeling method and provides support and reference for the application of spatial population data. The paper consists of the following parts: (2) characters of the error; (2) origins of the error; (3) advancement on the calculating methods of the spatial population data. In the first place, based on the analysis of the error trait, two aspects of the spatial population data precision are characterized and analyzed: numerical character and spatial distributing character. The later one, placed greater emphasis on in this paper, is depicted in two spatial scales: county and town. It is always essential and meaningful to the research in this paper that spatial distribution is as important as numerical value in analyzing error of the spatial distributed data. The result illustrates that the spatial population data error appears spatially in group, although it is random in the aspect of data statistics, all of that shows there lies spatial systematic error. Secondly, this paper comes to conclude and validate the lineal correlation between the residential land area (from 1:50000 map and taken as real area) and population. Meanwhile, it makes particular analysis on the relationship between the residential land area, which is obtained from the land use map and the population in three different spatial scales: village, town and county, and makes quantitative description of the residential density variation in different topological environment. After that, it analyzes the residential distributing traits and precision. With the consideration of the above researches, it reaches the conclusion that the error of the spatial distributed population is caused by a series of factors, such as the compactness of the residents, loss of the residential land, the population density of the city. Eventually, the paper ameliorates the method of pixeling the population data with the help of the analysis on error characters and causes. It tests 2-class regionalization based on the 1-class regionalization of China, and resorts the residential data from the land use map. In aid of GIS and the comprehensive analysis of various data source, it constructs models in each 2-class district to calculate spatial population data. After all, LinYi Region is selected as the study area. In this area, spatial distributing population is calculated and the precision is analyzed. All it illustrates is that new spatial distributing population has been improved much. The research is fundamental work. It adopts large amounts of data in different types and contains many figures to make convincing and detailed conclusions.

高山峡谷地区大跨度桥梁岸坡稳定性分析、趋势预测及应用研究

In order to realize fast development of the national economy in a healthy way and coordinate progress with whole society, the country has implemented the strategy of development of the western region. An important action of finishing this strategic task is to accelerate the highway construction in the western region, join the western region and places along the coast, the river, the border with goods and materials, technology, and personnel interchanges, and then drive development of the local economy.The western region was influenced by the Himalaya Tectonization in Cenozoic, and the crust rose and became the plateau. In the course of rising, rivers cut down sharply to form a lot of high mountains and gorges.Because of topography and geomorphology, bridges in the traffic construction in the alpine gorge area are needed. Rivers have characteristics of large flow, fast velocity and high and steep river valley, so building a pier in the river is not only very difficult, but also making the cost increase. At the same time, the impact that the pier is corroded and the bridge base that is drawn to be empty by flow are apt to cause destruction of the pier. For those reasons, suspending bridge and cable-stay bridge are usually adopted with the single and large span. For the large span bridge, the pier foundation could receive ten thousand and more vertical strength, bending moment and near kiloton horizontal thrust.Because bank slope in the alpine gorge district is cut deeply and unsettled big, natural stability is worse under endogenic and exogenic force. When bank slope bears heavy vertical strength, bending moment and horizontal thrust facing the river, it will inevitably make the balance state of rock and soil mass change, bridge bank slope deform, and even destroyed. So the key problem at the time of the large span's bridge construction in the alpine gorge area is how to make it stable.So based on the spot investigation, the Engineering Geology Analysis Method is very important to grasp the bank slope stability. It can provide the bank slope stability macroscopic ally and qualitatively, and reference to the indoor calculation. The Engineering Geology Analysis Method is that by way of analyzing and investigating terms of bank slope instability, stability development trend, the ancient rock slide and devolution in the site, stability comprehensive evaluation primarily, current and future stability of bank slope is gotten, realizing the intention to serving the concrete engineering.After the Engineering Geology Analysis Method is applied to project instances of BeiPan River Bridge and BaLin River Bridge, results are accord with bank slope actual conditions, which proves sites are suited to building bridges from site stability.we often meet bank slope stability issues in the traffic construction in the alpine gorge areao Before the evaluation of the bank slope stability, the engineering geological condition is investigated first. After that, the next exploration target and geology measures are decided. So, the Engineering Geology Analysis Method that the investigation of the engineering geological condition is the main content is quite important in practice. The other evaluations of the bank slope stability are based on it. Because foundation receives very heavy load, for the big span's bridge in the alpine gorge area, a long pile of the large diameter (D^0.8m) is usually selected. In order to reflect rock mass's deformation properties under rock-socketed pile function, the author has used the FLAG30 software for rock and soil mass and done many numerical simulations. By them, the author launches the further investigation on deformation properties of bank slope under different slope angle, pile length, diameter, elastic modulus, load, bank slope's structure, etc. Some conclusion meaningful to the design and produce are obtained.

个体人格类型与气味偏好的关系

So far the studies on personality are based on indirect way due to the complexity and limitation. Present research attempt to find another route to approach personality through olfaction. The framework of present research is on account of a modern personality theory model produced by the British psychologist Eysenck. The aim of present research is to prove a correlation between olfaction and personality because sensation and perception of the olfaction on special part of brain closely related to emotional arousal. This research was carefully designed and performed by both psychological questionnaire and olfaction examination. The results indicated some good correlation between smell sense and personal character, which can by applied into personality and behavior analysis.

投射性空间关系表达过程的研究

It is easy to find that, in each language, the terms and phrases for the representation of spatial locating and orientation, and the ways for sharing spatial knowledge are very rich. The basic way of sharing spatial information is mapping our experience and actions with the environment by using terms and utterances that represent spatial relations. How to build the mapping relation among them and what factors affect the process of mapping are the questions need to be answered in this study. The whole course of expressing projective spatial relation includes the verbal expression and perception to the projective spatial relation. In experiment 1, the perceptual characteristics of perceiving the projective spatial relation was studied by analyzing the production latencies from the presentation of the stimulators in different directions (at 5 levels: 00, 22.50, 450, 67.50, and 900) to the onset of the corresponding buttons triggering on the keyboard, the study verifies the results of prior researches and revealed the foundation of expressing the projective spatial relation. In the experiment 2, and 3, the way and the role of the verbal expression were investigated. Subjects were asked to speak out the spatial relation between intended object and reference object by using verbal locative expressions. In experiment 2, Chinese was used as the verbal expression way, and in Experiment 3, English instead. Experiment 4 was similar as experiment 3, but time of voice key triggering was controlled and balanced among trials to verify the results of Experiment 3 further. Experiment 5 investigated the effect of pre-cue on the courses of expressing projective spatial relation. There were two kinds of clues, one was the spatial locative utterances, and the other was the perceptual coordinates framework, such as drawing a cross ”+” in a circle to imply four quadrants. The main conclusions of this research were as follows: 1. When speaking out a spatial relation, different sets of spatial terms, such as “left and right”, or “north and south”, affected the speed of verbal expression. Verbal coding process was affected by how well the perceptual salient direction matched with spatial terms, which made the speed of verbal expression different. 2. When using composite spatial terms to express diagonal directions, people tend to use direct mapping from spatial conceptual representation to composite spatial terms, rather than combining the two axes, which implied there existed direct one-on-one mapping between spatial conceptual representation and spatial terms. But during specific developing period, the way of combining two axes was employed as well for spatial expression, which meant perceptual salient directions played critical role in the process of perceiving and expressing projective spatial relations. 3. The process of verbal expression of the projective spatial relation was improved by the familiarity of spatial utterances, but this improvement was not the results of enhancement of the effect of prototypical diagonal direction.

Line Kinematics for Whole-Arm Manipulation

A Whole-Arm Manipulator uses every surface to both sense and interact with the environment. To facilitate the analysis and control of a Whole-Arm Manipulator, line geometry is used to describe the location and trajectory of the links. Applications of line kinematics are described and implemented on the MIT Whole-Arm Manipulator (WAM-1).

Breaking the Rules: writing reflectively for yourself.

The rules which epitomise good writing may on occasions be broken, deliberately and with what the writers judge to be good purpose. This can well occur when students or staff set out to engage effectively with their personal and professional development, through personal reflection on and in experiences. They may do this in what has been called “stream of consciousness” writing, which is deliberately compiled in a manner at variance with the general rules for best practice. The rationale for such an unusual decision, namely to engage in what is frankly disorderly writing, is set out briefly in this chapter. Its characteristics are summarised, in implicit contrast with more conventional styles of writing. Examples are included of claims for the effectiveness of this style when used for developmental purposes by students and staff; and reference is made to the publications of some of those who have endorsed this approach.

Angewandte Literaturwissenschaft – Überlegungen zu Perspektiven einer Germanistik der Zukunft

Recently there is a big discussion about the sense and nonsense of what we called the former philology, especially in the field of German studies. The author tries to focus his consideration of German literature on the importance of studying German literature in future and what this subject can get a special use for certain sustainability and facilities. He points out some ways in which we can deal with that in future as students, but as teachers too.