Fjärrvärmedrivna vitvaror : Erfarenheter från utveckling, installationer och kostnadsberäkningar

Värmedrivna vitvaror eller HWC-maskiner som de kallas av tillverkaren värms med varmt vatten från en cirkulerande krets via en värmeväxlare inbyggd i maskinen, till skillnad från konventionella maskiner som värms med el. Denna teknik skall inte förväxlas med maskiner som är anslutna till varmvattenledningen och fylls på med varmt vatten och som därmed begränsas till disk- och tvätt. Syftet med fjärrvärmedrivna vitvaror är alltså att använda fjärrvärme, som har lägre kvalitet och pris än elenergi för uppvärmning och torkning och på så sätt spara el och utöka fjärrvärmeunderlaget. En jämförelse av koldioxidutsläpp och primärenergianvändning mellan konventionella vitvaror och fjärrvärmedrivna vitvaror visar att både koldioxidutsläpp och primärenergianvändning blir lägre för fjärrvärmedrivna vitvaror om biobränsle anses koldioxidneutralt och den el som ersätts är producerad i kolkraftverk eller gaskombikraftverk.   Denna rapport beskriver utveckling och kommersialisering av värmedrivna vitvaror (disk- och tvättmaskiner samt torktumlare och torkskåp) och hur de kan anslutas mot fjärrvärmesystem i olika systemlösningar. Dessutom har de energimässiga och ekonomiska förutsättningarna för tekniken undersökts. Erfarenheterna från fältprovning är dock mycket begränsade, eftersom de byggen där fälttesterna skulle ske försenades. Under 2013 färdigställs ett flerbostadshus med värmedrivna vitvaror i 160 lägenheter i Västerås.   De utvecklade maskinernas värmeanvändning som andel av total energianvändning vid 60 graders framledningstemperatur har uppmätts till ca 50 % för diskmaskinen, 67 % för tvättmaskinen, 80 % för torktumlaren och 93 % för torkskåpet. I det studerade flerbostadshuset av passivhusstandard uppgår lasten från värmedrivna vitvaror komfortgolvvärme och handdukstorkar till upp mot 30 % av husets totala värmeanvändning. För småhus är motsvarande siffra upp mot 20 %. Att använda fjärrvärme istället för elvärme till dessa installationer som normalt är elvärmda kan allts minska elbehovet betydligt i lågenergibebyggelse vilket också minskar både koldioxidutsläppen och primärenergianvändningen.   Ekonomiska analyser har genomförts för två olika systemkoncept (separat vitvarukrets och Västeråsmodellen) för nybyggda småhusområden och flerfamiljshus där fjärrvärme inte bara används till vitvaror utan också till handdukstorkar och komfortgolvvärme. De ekonomiska analyserna visar att Västeråsmodellen är den mest ekonomiskt intressanta systemlösningen med värmedrivna vitvaror, handdukstork och komfortgolvvärme. I flerfamiljshus kan den vara konkurrenskraftig mot de elvärmda alternativen (konventionellt system med eldrivna vitvaror, komfortgolvvärme och handdukstorkar) om prisskillnaden mellan el och fjärrvärme är större än 0,7 kr/kWh. En parameterstudie visar att kapitalkostnaden blir ganska hög jämfört med energikostnaden, vilket betyder att lång livslängd och många cykler är viktigt för att förbättra de ekonomiska förutsättningarna för värmedrivna vitvaror. För passiva småhus blir kostnaden för Västeråsmodellen med värmedrivna vitvaror, handdukstork och komfortgolvvärme likvärdig med de elvärmda alternativen vid energiprisskillnader på 0,7 kr/kWh inklusive moms, medan det krävs prisskillnader på 0,9 kr/kWh inklusive moms för normalisolerade småhusområden.   Sammanfattningsvis kan sägas att i kommuner med ett konkurrenskraftigt fjärrvärmepris finns det viss lönsamhet för hela konceptet enligt Västeråsmodellen med värmedrivna vitvaror, komfortgolvvärme, och handdukstorkar. Om man däremot ser på konkurrensen för enskilda vitvaror är det främst torktumlaren som är konkurrenskraftig i bostäder. Målpriset på 1000 kr extra för värmedrift har inte kunnat uppnås inom projektet för diskmaskiner och tvättmaskiner. Det krävs lägre priser och låga anslutningskostnader för att räkna hem diskmaskinen och tvättmaskinen som enskilda komponenter.   Värmedrivna tvättmaskiner och torktumlare är konkurrenskraftiga i flerfamiljstvättstugor. Speciellt i de fall där beläggningen är god och flera maskiner delar på anslutningskostnaden till fjärrvärmecentralen kan värmedrift bli riktigt lönsam. Torkskåpens konkurrenskraft har inte kunnat utvärderas, då priset ännu inte fastställts. Att använda VVC-systemet för värmedistribution till värmedrivna vitvaror kan vara mycket intressant, men det kräver att legionellaproblematiken kan lösas. I nuläget finns ingen lösning som uppfyller formuleringarna i boverkets byggregler. Ett annat distributionssätt som kan vara intressant, men som inte undersökts i studien är att använda VVC för varmvattendistribution och en gemensam radiator- och vitvarukrets med konstant framledningstemperatur. Den aktör som förväntas ha störst ekonomiskt intresse av att tekniken implementeras är sannolikt fjärrvärmebolagen som får sälja mer värme och det ligger därmed främst på deras ansvar att marknadsföra tekniken i mötet med sina kunder.

Vård i livets slut av personer med demens. Personal och anhörigas upplevelse av given vård : En metasyntes

Palliativt förhållningssätt kännetecknas av helhetssyn av människan och uppnås genom stöttning av individen att leva med värdighet och största möjliga välbefinnande till livets slut oavsett diagnos eller ålder. Demens är en sjukdom som är svårt handikappande för den som drabbas och för de anhöriga är sjukdomen förödande. Den palliativa vården av personer med demens är inte optimerad. Studier visar att det dels beror på demenssjukdomen som är svår att vårda och dels för att stöd till de personer som vårdar sina anhöriga och det sociala kommunala nätverket har brister. Syfte: Att analysera upplevelsen av given vård i livets slutskede hos personer med demensdiagnos ur personalens och anhörigas perspektiv. Metod: Metasyntes utförd med Howell Major och Savin-Badins analysmodell, Qualitative Research Synthesis. Resultat: Kunskap och personcentrering var de två begrepp som blev produkten av syntesen. Begreppen fungerar som motsatser, om det finns kunskap och personcentrering så finns en bra upplevelse av given vård hos personal och anhöriga och om det brister i kunskap och personcentrering blir upplevelsen sämre. Diskussion: Kunskap om demens bland personal har i syntesen visats vara en indikator för god vård vid livets slut. Utbildning i demenssjukdom bör ske kontinuerligt och på olika nivåer beroende på vilken personalkategori som utbildas. Konklusion: Palliativ vård och demens måste få utrymme i utbildningarna av all personal, från undersköterska till specialistläkare.

Passive solar options for reducing heating demand and maintain indoor climate in a multifamily house in Sweden

This research was carried out by studying possible renovation of a two-storey detached multifamily building by using passive solar design options in a cold climate in Borlänge, Sweden where the heating Degree Days are 4451 (base 20°C). Borlänge`s housing company, Tunabyggen, plans to renovate the project house located inthe multicultural district, Jakobsgårdarna. The goal of the thesis was to suggest a redesign of the current building, decrease the heating energy use, by applying passive solar design and control strategies, in a most reasonable way. In addition ensure a better thermal comfort for the tenants in the dwellings. Literatures have been studied, from which can be inferred that passive design should be abasic design consideration for all housing constructions, because it has advantages to ensure thermal comfort, and reduce the energy use. In addition further savings can be achieved applying different types of control strategies, from which the house will be more personalized, and better adapted to the user’s needs.The proposed method is based on simulations by using TRNSYS software. First a proper building model was set up, which represents the current state of the project building. Then the thermal insulation and the windows were upgraded, based on today's building regulations. The developments of the passive solar options were accomplished in two steps. First of all the relevant basic passive design elements were considered, then those advantages were compared to the advantages of applying new conventional thermostat, and shading control strategies.The results show that there is significant potential with the different types of passive solar design; their usage depends primarily on the location of the site as well as the orientation of the project building. Applying the control strategies, such as thermostat, and shading control, along the thermal insulation upgrade, may lead to significant energy savings (around 40 %), by comparison to the reference building without any upgrade.

System Integration of PV/T Collectors in Solar Cooling Systems

The demand for cooling and air-conditioning of building is increasingly ever growing. This increase is mostly due to population and economic growth in developing countries, and also desire for a higher quality of thermal comfort. Increase in the use of conventional cooling systems results in larger carbon footprint and more greenhouse gases considering their higher electricity consumption, and it occasionally creates peaks in electricity demand from power supply grid. Solar energy as a renewable energy source is an alternative to drive the cooling machines since the cooling load is generally high when solar radiation is high. This thesis examines the performance of PV/T solar collector manufactured by Solarus company in a solar cooling system for an office building in Dubai, New Delhi, Los Angeles and Cape Town. The study is carried out by analyzing climate data and the requirements for thermal comfort in office buildings. Cooling systems strongly depend on weather conditions and local climate. Cooling load of buildings depend on many parameters such as ambient temperature, indoor comfort temperature, solar gain to the building and internal gains including; number of occupant and electrical devices. The simulations were carried out by selecting a suitable thermally driven chiller and modeling it with PV/T solar collector in Polysun software. Fractional primary energy saving and solar fraction were introduced as key figures of the project to evaluate the performance of cooling system. Several parametric studies and simulations were determined according to PV/T aperture area and hot water storage tank volume. The fractional primary energy saving analysis revealed that thermally driven chillers, particularly adsorption chillers are not suitable to be utilizing in small size of solar cooling systems in hot and tropic climates such as Dubai and New Delhi. Adsorption chillers require more thermal energy to meet the cooling load in hot and dry climates. The adsorption chillers operate in their full capacity and in higher coefficient of performance when they run in a moderate climate since they can properly reject the exhaust heat. The simulation results also indicated that PV/T solar collector have higher efficiency in warmer climates, however it requires a larger size of PV/T collectors to supply the thermally driven chillers for providing cooling in hot climates. Therefore using an electrical chiller as backup gives much better results in terms of primary energy savings, since PV/T electrical production also can be used for backup electrical chiller in a net metering mechanism.

Performance evaluation of ventilation radiators

A ventilation radiator is a combined ventilation and heat emission unit currently of interest due to its potential for increasing energy efficiency in exhaust ventilated buildings with warm water heating. This paper presents results of performance tests of several ventilation radiator models conducted under controlled laboratory conditions.   The purpose of the study was to validate results achieved by Computational Fluid Dynamics (CFD) in an earlier study and indentify possible improvements in the performance of such systems. The main focus was on heat transfer from internal convection fins, but comfort and health aspects related to ventilation rates and air temperatures were also considered.   The general results from the CFD simulations were confirmed; the heat output of ventilation radiators may be improved by at least 20 % without sacrificing ventilation efficiency or thermal comfort.   Improved thermal efficiency of ventilation radiators allows a lower supply water temperature and energy savings both for heating up and distribution of warm water in heat pumps or district heating systems. A secondary benefit is that a high ventilation rate can be maintained all year around without risk for cold draught.

Influence of hydraulics and control of thermal storage in solar assisted heat pump combisystems

This paper studies the influence of hydraulics and control of thermal storage in systems combined with solar thermal and heat pump for the production of warm water and space heating in dwellings. A reference air source heat pump system with flat plate collectors connected to a combistore was defined and modeled together with the IEA SHC Task 44 / HPP Annex 38 (T44A38) “Solar and Heat Pump Systems” boundary conditions of Strasbourg climate and SFH45 building. Three and four pipe connections as well as use of internal and external heat exchangers for DHW preparation were investigated as well as sensor height for charging of the DHW zone in the store. The temperature in this zone was varied to ensure the same DHW comfort was achieved in all cases. The results show that the four pipe connection results in 9% improvement in SPF compared to three pipe and that the external heat exchanger for DHW preparation leads to a 2% improvement compared to the reference case. Additionally the sensor height for charging the DHW zone of the store should not be too low, otherwise system performance is adversely affected

The effects of attitudes and personality traits on mode choice

We hypothesise that differences in people's attitudes and personality traits lead them to attribute varying importance to environmental considerations, safety, comfort, convenience and flexibility. Differences in personality traits call be revealed not only in the individuals' choice of transport, but also in other actions of their everyday lives-such as how much they recycle, whether they take precautions or avoid dangerous pursuits. Conditioning on a set of exogenous individual characteristics, we use indicators of attitudes and personality traits to form latent variables for inclusion in an, otherwise standard, discrete mode choice model. With a sample of Swedish commuters, we find that both attitudes towards flexibility and comfort, as well as being pro-environmentally inclined, influence the individual's choice of mode. Although modal time and cost still are important, it follows that there are other ways, apart from economic incentives, to attract individuals to the, from society's perspective, desirable public modes of transport. Our results should provide useful information to policy-makers and transportation planners developing sustainable transportation systems.

Radiation properties of coil-coated steel in building envelope surfaces and the influence on building thermal performance

Recent studies have shown that the optical properties of building exterior surfaces are important in terms of energy use and thermal comfort. While the majority of the studies are related to exterior surfaces, the radiation properties of interior surfaces are less thoroughly investigated. Development in the coil-coating industries has now made it possible to allocate different optical properties for both exterior and interior surfaces of steel-clad buildings. The aim of this thesis is to investigate the influence of surface radiation properties with the focus on the thermal emittance of the interior surfaces, the modeling approaches and their consequences in the context of the building energy performance and indoor thermal environment. The study consists of both numerical and experimental investigations. The experimental investigations include parallel field measurements on three similar test cabins with different interior and exterior surface radiation properties in Borlänge, Sweden, and two ice rink arenas with normal and low emissive ceiling in Luleå, Sweden. The numerical methods include comparative simulations by the use of dynamic heat flux models, Building Energy Simulation (BES), Computational Fluid Dynamics (CFD) and a coupled model for BES and CFD. Several parametric studies and thermal performance analyses were carried out in combination with the different numerical methods. The parallel field measurements on the test cabins include the air, surface and radiation temperatures and energy use during passive and active (heating and cooling) measurements. Both measurement and comparative simulation results indicate an improvement in the indoor thermal environment when the interior surfaces have low emittance. In the ice rink arenas, surface and radiation temperature measurements indicate a considerable reduction in the ceiling-to-ice radiation by the use of low emittance surfaces, in agreement with a ceiling-toice radiation model using schematic dynamic heat flux calculations. The measurements in the test cabins indicate that the use of low emittance surfaces can increase the vertical indoor air temperature gradients depending on the time of day and outdoor conditions. This is in agreement with the transient CFD simulations having the boundary condition assigned on the exterior surfaces. The sensitivity analyses have been performed under different outdoor conditions and surface thermal radiation properties. The spatially resolved simulations indicate an increase in the air and surface temperature gradients by the use of low emittance coatings. This can allow for lower air temperature at the occupied zone during the summer. The combined effect of interior and exterior reflective coatings in terms of energy use has been investigated by the use of building energy simulation for different climates and internal heat loads. The results indicate possible energy savings by the smart choice of optical properties on interior and exterior surfaces of the building. Overall, it is concluded that the interior reflective coatings can contribute to building energy savings and improvement of the indoor thermal environment. This can be numerically investigated by the choice of appropriate models with respect to the level of detail and computational load. This thesis includes comparative simulations at different levels of detail.

To achieve safe and respectful maternity care in tertiary level hospitals in Nepal, relatives are a valued addition to the provision of maternity care

Introduction: The White Ribbon Alliance for safe motherhood believes respectful maternity care is the universal right of every childbearing woman. Methods: NHRC in 2012 approved an inquiry of respectful care at facility-based childbirth. Individual-, focus group interviews and content analysis was used for gathering and analysis of data. Findings: The participating women and the SBAs shared similar views, and this was that together the SBAs and relatives ensured the women remained within the comfort and safety zone when giving birth in a tertiary level maternity unit. Conclusion: The SBAs strategy of having relatives provides basic care alongside the provision of medical care by the SBAs is a strategy that Nepal could use to improve the quality of its maternity care without any additional costs. Clinical implication: Prenatal classes might contribute to preparing relatives. Further Research: Further research could evaluate such a strategy in order to determine its effectiveness in reduction of morbidity and mortality.

The Family Novel in the Emerging Nation-State: A Comparative Study of Ba Jin’s Jia and Lev Tolstoy’s Anna Karenina

The theme of family in literature and in popular discourse occurs at times when the family as an institution is under attack. Attacks against the family coupled with defence of the family are viewed as the barometer of people’s satisfaction with the society in which they live. This outpouring of emotion, whether it is in defence of or attacking the family, is the result of the family’s position on the bridge between nature and society – a fortunate (or a detrimental) link between an individual and the units that make up a society. Across the United States and much of the western world, the battle for gay marriage and inclusive civil unions has revealed the fissures in our collective moral view of the family. The conservative concern about the absence of ‘family values’ is magnified by our situation in a world of flux. Inflation, war, terrorist threats, and the depletion of natural resources are but a few examples. When so much is unknown, how do we position ourselves? What anchors us to the past, gives us comfort in the present, and supports us in the future if not the family? Alternatively, what coddles us more in the past, shackles us more to the present, and lulls us more into a fixed conception of the future than the family? My research is not a sociological survey into the family nor does it stake any claims to understanding the present state of the family in society. The study seeks, however, to shed light on the rhetorical uses of the family by analysing two novels that are inextricably concerned with the theory of the family in times of heightened social change. In particular, my research focuses upon the social role and political meaning of the family in Anna Karenina and Jia.

Library Privacy Policies in 2015: Strategies for Renewed Relevance

In recent decades, library associations have advocated for the adoption of privacy and confidentiality policies as practical support to the Library Code of Ethics with a threefold purpose to (1) define and uphold privacy practices within the library, (2) convey privacy practices to patrons and, (3) protect against potential liability and public relations problems. The adoption of such policies has been instrumental in providing libraries with effective responses to surveillance initiatives such as warrantless requests and the USA PATRIOT ACT. Nevertheless, as reflected in recent news stories, the rapid emergence of data brokerage relationships and technologies and the increasing need for libraries to utilize third party vendor services have increased opportunities for data surveillers to access patrons’ personal information and reading habits, which are funneled and made available through multiple online library service platforms. Additionally, the advice that libraries should “contract for the same level of privacy reflected in their privacy policies” is no longer realistic given that the existence of multiple vendor contracts negotiated at arms length is likely to produce varying privacy terms and even varying definitions of what constitutes personal information (PII). These conditions sharply threaten the effectiveness and relevance of library privacy policies and privacy initiatives in that such policies increasingly offer false comfort by failing to reflect privacy weaknesses in the data sharing landscape and vendor contracts when library-vendor contracts fail to keep up with vendor data sharing capabilities. While some argue that library privacy ethics are antiquated and rendered obscure in the current online sharing economy PEW studies point to pronounced public discomfort with increasing privacy erosion. At the same time, new directions in FTC enforcement raise the possibility that public institutions’ privacy policies may serve as swords to unfair or deceptive commercial trade practices – offering the potential of renewed relevance for library privacy and confidentiality policies. This dual coin of public concern and the potential for enhanced FTC enforcement suggests that when crafting privacy polices libraries must now walk the knife’s edge by offering patrons both realistic notice about the limitations of protections the library can ensure while at the same time publicly holding vendors accountable to library privacy ethics and expectations. Potential solutions for how to walk this edge are developed and offered as a subject for further discussion to assist the modification of model policies for both public and academic libraries alike.

A climatologia aplicada ao ambiente construído : uma contribuição à caracterização climática de Porto Alegre/RS

Com caráter informativo, inicia-se apresentando a relação entre a climatologia e o ambiente construído, em seus campos especificos de aplicação (urbanismo, projeto de edificações, execução de obras, e manutenção e uso das construções), considerando-se os aspectos históricos, econômico-ecológicos e os ligados à súde e ao conforto do usuário, abrangidos por tal relação. A importância da disponibilidade de informações climatológicas é então comentada, bem como diversas metodalagias de análise e representação de dados climáticos. Com caráter aplicativo, apresenta-se uma contribuigão à caracterização climática da cidade de Porto Alegre, RS. São analisadas os valores médios horários-mensais doa principais parâmetros climáticos disponíveis (temperatura, umidade, velocidade e direção do vento, e nebulosidade), propondo-se uma representação gráfica sintética alternativa para os mesmos. A análise é complementada pala execução de dois procedimentos técnicos: avaliação do conforto térmico, com identificação do período critico de verão, e projeto de dispositivo de sombreamento de aberturas retangulares. Embora esteja em foco o caso específico de Porto Alegre, tais metodologias encontram-se descritas de modo a serem aplicadas a qualquer outra localidade, procurando-se ampliar a utilidade prática do presente estudo.

A Internet como canal de compra

A Internet, apesar de sua grande popularização, é ainda uma incógnita sob o ponto de vista de seu alcance comercial e de suas implicações no estudo do Comportamento do Consumidor. Numerosos estudos estão sendo desenvolvidos, porém dentro de um contexto teórico clássico de Marketing, isto é, posicionando-a como um instrumento “midiático”. Diferentemente, este trabalho procura vê-la como um canal de marketing, analisando-a através da resposta de 726 usuários da Companhia de Processamento de Dados do Rio Grande do Sul – PROCERGS, provedor de acesso à Internet do Rio Grande do Sul. Foi possível identificar sete dimensões características do processo de compra na rede: 1) comodidade, 2) atendimento, 3) conteúdo informacional do site, 4) apresentação e interface da home page, 5) segurança, 6) taxa e tempo de entrega e 7) oferta de produtos. O estudo mostra que a oferta de produtos e a comodidade são os fatores que influenciam a decisão de compra, enquanto que a apresentação/interface da home page, a segurança e o atendimento são os fatores mais preponderantes na decisão de NÃO compra. Também são apresentadas as diferenças percebidas pelos usuários entre a compra realizada na Internet e a efetuada nos canais tradicionais. A avaliação da Internet como canal de compra é finalizada com a identificação dos atributos determinantes da compra pela rede.

Evolução do conforto doméstico no estado de S. Paulo, 1980-2002: análise quantitativa

É nítida e rápida a popularização da maioria dos bens duráveis de consumo no Estado de São Paulo, nos últimos vinte anos. Colaboram para isso a universalização da oferta domiciliar de eletricidade, água encanada, esgotos, e a tendência ao barateamento dos bens. Entre outros efeitos, tal popularização deteriora a eficácia das escalas de classificação sócio- econômica baseadas na posse de itens de conforto doméstico, suscitando freqüentes revisões e discórdias no interior da comunidade de marketing. Este estudo sistematiza estatísticas sobre situação domiciliar e posse de itens de conforto doméstico no Estado de S. Paulo, e mostra como isso afeta o consumo material e cultural. Finalmente, aponta que é chegada a hora de se usar mais e melhor variáveis como educação, profissão, qualidade do domicílio, tal como se faz em países desenvolvidos, para o entendimento mais pleno das mudanças que implantam no Brasil a moderna sociedade de consumo.

Busca pelo homem social nas organizações: indícios, constatações, possibilidades

This study approaches the question of organizations in search for competitiveness when globalization, knowledge and technological advances in the First World is a challenge in developing countries. The case study research focus on Bahia Sul ¿ a large organization which belongs to the important sector of paper and cellulose, especially in terms of exports. This study analyses an organization in that underpriviledged situation of a third world country in which the majority of organizational strategies are heavily thrown on people who are simultaneously reduced to instruments for economic results and who are highly demanded in terms of productivity and creativity. Due to that reality, references chosen present two key contrasting concepts. Mass man, going back to Taylor¿s blue collars as well as to Marcel¿s knowledgeable but empty words man, whose abilities do not feet his needs, in contrast with rogerian expectations of person as a mutable and continuously enriched human being and with habermasian position looking for political and decision making participation in work an social situations. Results show a strong presence of mass man, despite his technological knowledge, and scarce indications of the social man and which appears in mere aspirations out of labor situations. Conclusions emphasize a need for coherence between organizational practices in search for competitiveness and expectations on persons¿ performance because they stimulate exchanges in terms of working places for obedience and some material comfort which is aggravated by the fact that any possibility of personal fulfillment is interpreted as only possible in out of work situations. Competitiveness in such a context is not to be expected.