Cu0.5Zn0.5Fe2O4 ferrite for application as a soft magnetic material

This work involved the synthesis and characterization of Cu0.5Zn0.5Fe2O4 ferrite powders prepared by combustion reaction for use as soft magnetic materials. The powders were characterized by nitrogen adsorption (BET), XRD, Rietveld refinement, SEM, TEM and magnetic measures. The results indicate that the combustion reaction yielded crystalline powders containing spinel ferrite as the primary phase and traces of Fe2O3 as secondary phase. The crystallite size and lattice microdeformation calculated from Rietveld refinements were 36 and 0.24 nm, respectively. The micrographic analysis revealed particles smaller than 100 nm and fine particle agglomerates. The particles were approximately spherical and their size, calculated by TEM, was 29 nm. The magnetic parameters indicated that the Cu-Zn ferrite powders presented closed hysteresis loops and soft magnetic properties. © (2012) Trans Tech Publications, Switzerland.

Low-temperature synthesis of nanosized bismuth ferrite by the soft chemical method

This paper describes research on a simple low-temperature synthesis route to prepare bismuth ferrite nanopowders by the polymeric precursor method using bismuth and iron nitrates. BiFeO 3 (BFO) nanopowders were characterized by means of X-ray diffraction analyses, (XRD), Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy (Raman), thermogravimnetric analyses (TG-DTA), ultra-violet/vis (UV/Vis) and field emission scanning electron microscopy (FE-SEM). XRD patterns confirmed that a pure perovskite BiFeO 3 structure with a rhombohedral distorted perovskite structure was obtained by heating at 850 °C for 4 hours. Typical FT-IR spectra for BFO powders revealed the formation of a perovskite structure at high temperatures due to a metal-oxygen bond while Raman modes indicated oxygen octahedral tilts induced by structural distortion. A homogeneous size distribution of BFO powders obtained at 850 °C for 4 hours was verified by FE-SEM analyses. © 2012 Elsevier Ltd and Techna Group S.r.l.

Tafonomia dos Pygocephalomorpha (Crustacea, Peracarida, Malacostraca), Permiano, Bacia do Paraná, Brasil, e seu significado paleoambiental

Taphonomy of the pygocephalomorpha (Crustacea, Peracarida, Malacostraca), Permian, Paraná Basin, Brazil, and its paleoenvironmental meaning. Crustaceans (Pygocephalomorpha, Peracarida) are the main fossil invertebrates recorded in the Early Permian Assistência Formation, Irati Subgroup, State of São Paulo, Paraná Basin. For this study, samples taken from the base of the Ipeúna Member, Bairrinho Bed, State of São Paulo, were analyzed and complemented by fossils from the Irati Formation, State of Rio Grande do Sul. The taphonomic spectrum of the pygocephalomorphs includes three main preservational modes: Type 1. Complete pygocephalomorphs (with outstretched or flexed abdomen), which are associated to cream-colored mudstones and more commonly to black shales. In rare cases, molds of soft parts are preserved. They suffered rapid burial (hours to days) by mud blankets associated to storm events in anoxic bottoms, below storm wave base with minimum bottom disruption, followed by low rates of background sedimentation; Type 2. Partly articulated (carapace and abdomen, with or without caudal fan and without appendages) pygocephalomorphs, with extended or flexed abdomen, which are present in cream-colored pelites, associated with hummocky cross-stratifications, intercalated with black shales. These may represent individuals or remains lying in the sediment-water interface preserved by rapid burial associated to episodic sedimentation events; Type 3. Disarticulated pygocephalomorphs, with isolated carapaces, abdomen, or abdominal segments. This is the predominant preservational mode in our samples. The skeletal remains can be found isolated or in dense, bioclast-supported concentrations (micro-coquines), representing proximal to distal tempestites. Finally, the extreme preservational quality seen in crustaceans of the Type 1 recorded in black shales, occasionally with molds of soft parts, indicates that the host rocks may represent Konservat-Lagerstätten deposits, as already suggested to coeval occurrences of the Irati Formation in Uruguay. © 2013 by the Sociedade Brasileira de Paleontologia.

Influence of buccal bony crest width on marginal dimensions of peri-implant hard and soft tissues after implant installation. An experimental study in dogs

Aim: To evaluate the influence of the width of the buccal bony wall on hard and soft tissue dimensions following implant installation. Material and methods: Mandibular premolars and first molars of six Labrador dogs were extracted bilaterally. After 3 months of healing, two recipient sites, one on each side of the mandible, were prepared in such a way as to obtain a buccal bony ridge width of about 2 mm in the right (control) and 1 mm in the left sides (test), respectively. Implants were installed with the coronal margin flush with the buccal alveolar bony crest. Abutments were placed and the flaps were sutured to allow a non-submerged healing. After 3 months, the animals were euthanized and ground sections obtained. Results: All implants were completely osseointegrated. In respect to the coronal rough margin of the implant, the most coronal bone-to-implant contact was apically located 1.04 ± 0.91 and 0.94 ± 0.87 mm at the test and control sites, respectively, whereas the top of the bony crest was located 0.30 ± 0.40 mm at the test and 0.57 ± 0.49 mm at the control sites. No statistically significant differences were found. A larger horizontal bone resorption, however, evaluated 1 mm apically to the rough margin, was found at the control (1.1 ± 0.7 mm) compared to the test (0.3 ± 0.3 mm) sites, the difference being statistically significant. A thin peri-implant mucosa (2.4-2.6 mm) was found at implant installation while, after 3 months of healing, a biological width of 3.90-4.40 mm was observed with no statistically significant differences between control and test sites. Conclusions: A width of the buccal bony wall of 1or 2 mm at implant sites yielded similar results after 3 months of healing in relation of hard tissue and soft tissues dimensions after implant installation. © 2012 John Wiley & Sons A/S.

Sediment quality assessment in a tropical estuary: The case of Ceará River, Northeastern Brazil

The present study aimed to assess the sediment quality in a tropical estuary located in the northeast of Brazil under semi-arid conditions and multiple sources of contamination, using both toxicity bioassays and metal distribution. The metal distribution followed a concentration gradient decreasing one order of magnitude from the inner station toward the outer estuary, with amounts in the following order: Fe > Al > Zn > Cr > Pb > Cu. The index of geoaccumulation indicated a metal enrichment in the Ceará river sediment, mainly at inner sites, considered from moderately to strongly contaminated by Al, Cu, Cr and Zn. Sediment samples were considered toxic by means of whole sediment tests with copepods (reproduction) and amphipods (survival), and also elutriate fraction and sediment-water interface with sea urchin embryos (development). Acute and chronic toxicity did not exhibit a significant correlation with metals, emphasizing the influence of other contaminants mainly related to the pollution sources installed in the mid-estuary. © 2013 Elsevier Ltd. All rights reserved.

Piezoresponse force microscopy characterization of rare-earth doped BiFeO3 thin films grown by the soft chemical method

The multiferroic behavior with ion modification using rare-earth cations on crystal structures, along with the insulating properties of BiFeO3 (BFO) thin films was investigated using piezoresponse force microscopy. Rare-earth-substituted BFO films with chemical compositions of (Bi 1.00-xRExFe1.00O3 (x=0; 0.15), RE=La and Nd were fabricated on Pt (111)/Ti/SiO2/Si substrates using a chemical solution deposition technique. A crystalline phase of tetragonal BFO was obtained by heat treatment in ambient atmosphere at 500 °C for 2 h. Ion modification using La3+ and Nd3+ cations lowered the leakage current density of the BFO films at room temperature from approximately 10-6 down to 10-8 A/cm2. The observed improved magnetism of the Nd3+ substituted BFO thin films can be related to the plate-like morphology in a nanometer scale. We observed that various types of domain behavior such as 71° and 180° domain switching, and pinned domain formation occurred. The maximum magnetoelectric coefficient in the longitudinal direction was close to 12 V/cm Oe. © 2012 Elsevier Ltd and Techna Group S.r.l.

Origin and impact of the oldest metazoan bioclastic sediments

The emergence of soft-bodied metazoans and the radiation of the earliest skeletal organisms substantially changed the ecological dynamics of Ediacaran environments, leading to the genesis of biogenic hard-part deposits for the fi rst time in Earth's history. The impact of bioclast origin on sedimentary processes is analyzed herein, focusing on the sedimentology and taphonomy of shell concentrations dominated by the Ediacaran index fossil Cloudina from the Itapucumí Group, Paraguay. Skeletal concentrations include both dense accumulations of parautochthonous, disarticulated specimens (Type 1 deposits) and in situ specimens preserved as loosely packed assemblages (Type 2 deposits). At that time, Cloudina was the critical source of durable biomineralized hard parts in an environment nearly free of other bioclasts. The simple fabric and geometry of these accumulations are typical of Cambrian-style shell beds. Despite their Precambrian age, these deposits indicate that the establishment of the Phanerozoic style of marine substrates and preservation in early shell beds was determined more by the acquisition of hard parts than by environmental changes. © 2013 Geological Society of America.

Acute toxicity and environmental risk of teflubenzuron to Daphnia magna, Poecilia reticulata and Lemna minor in the absence and presence of sediment

This study aimed to estimate the acute toxicity of teflubenzuron (1-(3,5-dichloro-2,4-difluorophenyl)-3-(2,6-difluorobenzoyl)urea) (TFB) for Daphnia magna, Lemna minor and Poecilia reticulata, in the absence and presence of sediment; evaluate the effect of sediment on the TFB bioavailability; and to classify this insecticide according to its environmental poisoning risk for agricultural and aquaculture uses. The tests of TFB acute toxicity were conducted in static system in a completely randomized design with increasing TFB concentrations, and a control group. The TFB has been classified according to the estimated values of EC50 and LC50 by its acute toxicity and environmental risk. The sediment significantly reduced toxicity and bioavailability of TFB in water column. Therefore, the insecticide can be classified as being highly toxic to Daphnia magna, which means the agricultural and aquacultural uses of TFB pose a high risk of environmental toxicity to non-target organisms. However, it was practically non-toxic to L. minor and P. reticulata. © 2013 Copyright Taylor and Francis Group, LLC.

Supplementation of soft drinks with metallic ions reduces dissolution of bovine enamel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface Roughness of Acrylic and Silicone-Based Soft Liners: In Vivo Study in a Rat Model

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ki-67 and CD100 immunohistochemical expression is associated with local recurrence and poor prognosis in soft tissue sarcomas, respectively

Soft tissue sarcomas (STSs) are a heterogeneous group of mesenchymal tumors of >50 subtypes. However, STSs represent <1% of types of cancer. Despite this low frequency, the disease is aggressive and treatment, when possible, is based on traditional chemotherapies. A number of cases of resistance to adjuvant therapies have been reported. Metastases are commonly identified in STS patients during diagnosis and the development of effective clinical parameters is crucial for correct management of the disease. The use of biological markers in cancer is a useful tool to determine patient prognosis. Ki--67 is a protein marker for proliferation of somatic cells and is widely used in prognostic studies of various types of tumor, including STSs. Cluster of differentiation 100 (CD100) is a member of the semaphorin family. The family was initially described as axon guidance molecules important for angiogenesis, organogenesis, apoptosis and neoplasia. CD100 was previously utilized as a prognostic factor in tumors and also in STSs. In the present study, protein expression of Ki--67 and CD100 was analyzed by immunohistochemistry in samples of STS patients of the Barretos Cancer Hospital (Barretos, Brazil) to establish prognostic criteria of the disease. Results demonstrate a correlation between CD100 expression and poor prognosis, consistent with a previous study. Moreover, the expression of Ki-67 was identified to correlate with presence of local or locoregional recurrence. To the best of our knowledge, no large casuistic study has revealed this correlation between Ki--67 and local recurrence in STSs. The use of Ki--67 and CD100 as markers in clinical pathological analysis may be suitable as a prognostic criterion in disease progression.

Soft-chemical synthesis, characterization and humidity sensing behavior of WO3/TiO2 nanopowders

Tungsten oxide/titania (WO3/TiO2) nanopowders were synthesized by the polymeric precursor method which varied the WO3 content between 0 and 10 mol%. The powders were thermally treated in a conventional furnace and their structural, microstructural and electric properties were evaluated by X-ray diffraction (XRD), Raman spectrometry, N 2 physisorption, NH3 chemisorption, temperature-programmed reduction (TPR), X-ray absorption near-edge spectroscopy (XANES) in situ XANES and extended X-ray absorption fine structure spectroscopy (EXAFS) and transmission electron microscopy (TEM). XRD and Raman spectrometry confirmed the homogeneous distribution of an amorphous WO3 phase in the TiO 2 matrix which stabilized the anatase phase through the generation of [TiO5·V0] or [TiO5·V 0] complex sites. Conventional TPR-H2 (temperature programmed reduction) along with XANES TPR-H2 and XANES TPR-EtOH showed that WO3/TiO2 sample reduction occurs through the formation of these complex clusters. Moreover, the addition of WO3 promoted an increase in the surface acidity of doped samples as revealed by NH3 chemisorption. The WO3/TiO2 bulk-ceramic samples were further used to estimate their potential application in a humidity sensor in the range of 15-85% relative humidity. Probable reasons that lead to the different humidity sensor responses of samples were given based on the structural and surface characterizations. Correlation between the sensing performance of the sensor and its structural features are also discussed. Although all samples responded as a humidity sensor, the W2T sample (2 mol% added WO3) excelled for sensitivity due to the increase in acid sites, optimum mean pore size and pore size distribution. © 2013 Elsevier B.V.

LOGO2VHDL: modelos descritos em VHDL a partir da linguagem do LOGO!Soft Comfort da Siemens

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A cultura norte-americana como um instrumento do soft power dos Estados Unidos: o caso do Brasil durante a política de boa vizinhança

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise fotoelástica da tensão entre diferentes tipos de sistemas de retenção em próteses obturadoras palatinas implanto-retidas ou não e com ou sem reembasamento “soft”

Pós-graduação em Odontologia - FOA