Desarrollo de un modelo de evaluación de ciudades basado en el concepto de ciudad inteligente (Smart city)

La presente tesis tiene por finalidad contribuir al conocimiento de los procesos de transformación de las ciudades convencionales en Ciudades Inteligentes o Smart Cities, el nuevo paradigma urbano, que surge como consecuencia de la utilización de las Tecnologías de la Información y de las Comunicaciones, las TIC, para mejorar la calidad de vida de las personas y aumentar la eficiencia y eficacia de los procesos, servicios e infraestructuras de la ciudad. El proceso de urbanización de la población mundial constituye una de las principales tendencias globales. Los retos a los que se enfrentan las urbes actuales para satisfacer las necesidades de sus habitantes, así como la forma en que cada ciudad aborda dichos retos, propician el desarrollo de estudios comparativos y rankings de ciudades. La oportunidad para llevar a cabo esta tesis deriva de: La novedad del concepto de Ciudad Inteligente. La necesidad de establecer estudios comparativos, respecto a dicho concepto, entre ciudades con características socioeconómicas y culturales comunes, dado que la mayoría de los estudios y rankings se desarrollan para conjuntos de ciudades cuyas características son muy dispares, pues, en general son seleccionadas por su condición de capitales de estados o de centros económicos-financieros. El interés de disponer de estudios sobre ciudades con tamaños de población medianos, inferiores al millón de habitantes, las cuales tienen baja presencia en los estudios comparativos. La inexistencia de estudios comparativos entre las ciudades españolas, en relación con el concepto de Ciudad Inteligente. La existencia de la Red Española de Ciudades Inteligentes, que permite disponer de una muestra de ciudades adecuada, para llevar a cabo un estudio comparativo de acuerdo con los puntos anteriores. El objetivo general de la presente tesis es contribuir al conocimiento de los procesos de transformación de la ciudad convencional en Ciudad Inteligente, a través de la formulación y aplicación de un modelo de evaluación, basado en el concepto holístico de Ciudad Inteligente o Smart City y desde la perspectiva del ciudadano. La metodología de trabajo seguida comprende, en primer lugar, la revisión del estado del arte, centrada en tres aspectos: la evolución del concepto Smart City, los estudios comparativos sobre Ciudades Inteligentes y las medidas que las ciudades españolas están implantando en la práctica para llevar a cabo su transformación en Ciudades Inteligentes. A continuación se lleva a cabo el diseño el modelo de evaluación. Este modelo refleja el carácter holístico del concepto de Ciudad Inteligente, para lo cual, de acuerdo con las definiciones que encontramos en la literatura, evalúa la situación de cada ciudad en relación con seis ejes o pilares, comúnmente aceptados por los diferentes autores: e-Gobierno y e-Gobernanza, Movilidad, Sostenibilidad Ambiental, Desarrollo Económico, Capital Intelectual y Calidad de Vida. El trabajo desarrollado implica un análisis, que se desarrolla de forma ordenada para cada uno de los ejes y, dentro de éstos, para sus correspondientes factores. En total se analizan 18 factores. Para cada uno de los ejes se lleva a cabo una revisión de las iniciativas más representativas para, a continuación, analizar y evaluar los correspondientes los factores. De forma complementaria al desarrollo del trabajo, se llevó a cabo una encuesta, dirigida a profesionales de diferentes áreas y sectores, todos ellos en el ámbito de las Ciudades Inteligentes. El objetivo de la encuesta es conocer, de acuerdo con la opinión de los profesionales, la situación actual en materia de despliegue de Ciudades Inteligentes, las actuaciones que consideran de mayor interés para la ciudad y las barreras del proceso de cambio. Una vez definido el modelo, se ha aplicado a las 62 ciudades que forman la Red Española de Ciudades Inteligentes (RECI), valorando los factores y los ejes para cada una de ellas. Así mismo, se ha analizado la influencia de las tres variables siguientes: tamaño de población, densidad de población y presupuesto municipal por habitante, determinando la relación entre el porcentaje de ciudades inteligentes de la muestra, en cada factor. Adicionalmente en el eje Capital Intelectual,se analizó la influencia del porcentaje de habitantes con estudios superiores. Las 62 ciudades RECI que componen la muestra evaluada, representan el 43 % de las ciudades españolas que cuentan con poblaciones superiores a los 50.000 habitantes. La población que abarca la muestra de ciudades estudiada representa el 35% de la población española. Finalmente, se ha determinado el ranking con las ciudades de RECI, de acuerdo con el modelo diseñado. Así mismo se ha llevado a cabo el análisis de sensibilidad, determinado el ranking resultante para la misma muestra de ciudades, aplicando la ponderación de los factores. Las principales aportaciones de la tesis son: Desarrollar un modelo de evaluación de ciudades basada en el concepto holístico de la Smart City y desde la perspectiva del ciudadano. Desarrollar una metodología de trabajo fundamentada en el análisis sistematizado de las web municipales, como medio para conocer la situación de las ciudades, en lugar de los datos estadísticos publicados, que son la fuente de información habitualmente empleada en los estudios comparativos. Disponer de un estudio comparativo específico de ciudades españolas. Llevar a cabo un estudio sobre una muestra de ciudades de tamaño medio, con características socioeconómicas y culturales comparables. Mejorar el conocimiento de los procesos que se están llevando a cabo en ciudades con poblaciones inferiores al millón de habitantes. The purpose of this thesis is to contribute to the knowledge of the cities and the transformation that is taking part in traditional cities becoming Smart Cities. The Smart City concept is the new urban paradigm that is born from the extensive use of Information Technologies (IT) in order to accomplish better citizen’s quality of life as well as improvements in urban processes, services and infrastructures. Several rankings and benchmarking studies are being conducted globally, in response to the increasing of urban population that is taking part around the world and the subsequent challenges to be confronted by the cities. This thesis aims to contribute to these studies. The opportunity for this thesis comes from: The Smart City concept as a new concept. The need of benchmarking studies focused on the Smart City concept, carried on cities with similar social and economic characteristics. The interest on benchmarking studies on medium size cities (with less than one million inhabitants). The absence of benchmarking studies on Spanish cities. The existence of the Spanish Smart Cities Network that can be considered an appropriate sample for a benchmark study. The main goal of this thesis is to develop a Smart Cities assessment model based on the citizen point of view and taking into account a holistic concept of Smart City. The thesis methodology starts with the state of the art revision, focused on three items: the Smart City concept, the benchmark studies and the projects actually developed by the Spanish cities under processes for becoming Smart Cities. The next step is the assessment model design, in accordance with the six main axes or pillars referred in the academic literature: e-Government and e-Governance, Mobility, Environmental Sustainability, Economic Development, Smart Citizens and Quality of Life. Also, a survey has been conducted and addressed to experts working on the different areas related to the Smart Cities. The aim of this survey is to know their opinion about the deployment of the Smart Cities, the priorities considered by the cities and the barriers that delay the change processes. Once the assessment model was ready, it was applied to the Spanish Smart Cities Network, with 62 member cities. Also, the bearing of three variables: city population, population density and city budget per inhabitant, are studied. The 62 cities studied are 43 % of the Spanish cities with population over 50.000 inhabitants. The population living in these cities is the 35% of total Spanish population. The main contribution of this thesis are: An assessment model for Smart Cities that takes into account the holistic concept of the Smart City as well as the citizen experience. A methodology that comprises municipal web analysis instead of statistics data, which are the usual source of data for current benchmarking studies. A Spanish Smart Cities benchmark. A benchmark on medium size cities with similar social and economic characteristics. A better understanding of the urban processes that are taking part on cities under one million inhabitants.

Eco-cities, Smart-cities : Soluciones a los retos de la ciudad contemporánea

Hoy en día las ciudades, como centros de innovación y economía global, constituyen el principal asentamiento de la humanidad. Con los avances tecnológicos de los últimos tiempos se ha impulsado el crecimiento económico, el consumo y la riqueza, propiciando una explosión demográfica sin precedentes, que se concentra sobre todo en las ciudades. Sin embargo, todo esto ha traído consigo graves consecuencias ambientales y sociales que amenazan a la humanidad y a la salud del planeta, como son el calentamiento global, la elevada contaminación, la congestión, la dispersión urbana, la pobreza urbana generalizada, etc. Así, desde el punto de vista de los diseños y planteamientos urbanos, han surgido diferentes modelos de ciudad que han intentado dar respuesta a estos males, algunos basados en la lógica ecológica, otros considerando a la tecnología como la única capaz de dar una solución eficaz. Actualmente, viene extendiéndose la idea de que lograr una ciudad verdaderamente sostenible y habitable pasa por acoger los conceptos ecológicos que permitan alcanzar la sostenibilidad, poniendo además la tecnología al servicio de los ciudadanos para lograr tales fines. Existen multitud de ejemplos de proyectos que se están construyendo o ya han sido ejecutados siguiendo las concepciones de alguno de estos modelos, basta saber si sus planteamientos han logrado solventar de una forma eficaz estas problemáticas.

Diseño de una plataforma Smart Services para Smart Cities

El objetivo principal de este Proyecto Fin de Carrera (PFC), consiste en diseñar una plataforma Smart Services dentro de una compañía, para proporcionar a sus clientes servicios de Smart Cities. Se diseñará una plataforma que en fase de implantación llegue a prestar servicios extremo a extremo a las AAPP (Ayuntamientos y concesionarios de servicios municipales). Es decir, desde la petición del servicio, hasta que el mismo se provisiona y se pone en marcha. El diseño de la solución para el Sistema de Gestión deberá cumplir con las siguientes características: 1. Gestión end-to-end de la Plataforma Smart Services. 2. Cobertura a los diferentes módulos funcionales del propio Sistema de Gestión: 3. Gestión del inventario. 4. Gestión de la provisión. 5. Monitorización y supervisión de la Plataforma Smart Services. 6. Gestión del servicio. 7. Escalabilidad: La solución propuesta debe garantizar la escalabilidad necesaria para poder atender a las necesidades de volumetría. 8. Sistema de Gestión implementado bajo herramientas Open Source.

Enseñanzas derivadas del Benchmark SMART 2013

El CEA francés, junto con EDF y la OIEA, recientemente organizaron un benchmark internacional y posterior workshop para evaluar las capacidades de simulación del comportamiento mecánico de estructuras nucleares de hormigón armado sometidas a acciones sísmicas. Principia, que fue el único participante español en el workshop, contribuyó a tres de las cuatro fases del ejercicio, que esencialmente consistía en simular los efectos de terremotos en un modelo a escala de una estructura nuclear típica, y en comparar los resultados con ensayos posteriores en mesa vibrante y con las predicciones de otros participantes. El artículo presenta algunas conclusiones obtenidas en los cálculos pre-ensayo, enriquecidas con observaciones producidas por las simulaciones adicionales llevadas a cabo una vez que se hicieron públicos los resultados de los ensayos.

Experience and lessons learnt from the SMART 2013 Benchmark

The French CEA, together with EDF and the IAEA, recently organised an international benchmark to evaluate the ability to model the mechanical behaviour of a typical nuclear reinforced concrete structure subjected to seismic demands. The participants were provided with descriptions of the structure and the testing campaign; they had to propose the numerical model and the material laws for the concrete (stage #1). A mesh of beam and shell elements was generated; for modelling the concrete a damaged plasticity model was used, but a smeared crack model was also investigated. Some of the initial experimental results, with the mock-up remaining in the elastic range, were provided to the participants for calibrating their models (stage #2). Predictions had to be produced in terms of eigen-frequencies and motion time histories. The calculated frequencies reproduced reasonably the experimental ones; the time histories, calculated by modal response analysis, also reproduced adequately the observed amplifications. The participants were then expected to predict the structural response under strong ground motions (stage #3), which increased progressively up to a history recorded during the 1994 Northridge earthquake, followed by an aftershock. These results were produced using an explicit solver and a damaged plasticity model for the concrete, although an implicit solver with a smeared crack model was also investigated. The paper presents the conclusions of the pre-test exercise, as well as some observations from additional simulations conducted after the experimental results were made available.

Money Smart Week April 25-29, 2016

Join us the week of April 25-29, 2016 to celebrate Money Smart Week 2016. We have great guest speakers from the financial institutions around the region come to talk about finances. Be present for each event and be entered into a drawing to receive $500 towards your student loan balance! A variety of food will be provided at each event too. The event is 4pm -5pm Monday to Friday at Inman E. Page Library.

Terpenoid-based defenses in conifers: cDNA cloning, characterization, and functional expression of wound-inducible (E)-α-bisabolene synthase from grand fir (Abies grandis)

(E)-α-Bisabolene synthase is one of two wound-inducible sesquiterpene synthases of grand fir (Abies grandis), and the olefin product of this cyclization reaction is considered to be the precursor in Abies species of todomatuic acid, juvabione, and related insect juvenile hormone mimics. A cDNA encoding (E)-α-bisabolene synthase was isolated from a wound-induced grand fir stem library by a PCR-based strategy and was functionally expressed in Escherichia coli and shown to produce (E)-α-bisabolene as the sole product from farnesyl diphosphate. The expressed synthase has a deduced size of 93.8 kDa and a pI of 5.03, exhibits other properties typical of sesquiterpene synthases, and resembles in sequence other terpenoid synthases with the exception of a large amino-terminal insertion corresponding to Pro81–Val296. Biosynthetically prepared (E)-α-[3H]bisabolene was converted to todomatuic acid in induced grand fir cells, and the time course of appearance of bisabolene synthase mRNA was shown by Northern hybridization to lag behind that of mRNAs responsible for production of induced oleoresin monoterpenes. These results suggest that induced (E)-α-bisabolene biosynthesis constitutes part of a defense response targeted to insect herbivores, and possibly fungal pathogens, that is distinct from induced oleoresin monoterpene production.

Human carbonic anhydrase XII: cDNA cloning, expression, and chromosomal localization of a carbonic anhydrase gene that is overexpressed in some renal cell cancers

We report the cloning and characterization of a tumor-associated carbonic anhydrase (CA) that was identified in a human renal cell carcinoma (RCC) by serological expression screening with autologous antibodies. The cDNA sequence predicts a 354-amino acid polypeptide with a molecular mass of 39,448 Da that has features of a type I membrane protein. The predicted sequence includes a 29-amino acid signal sequence, a 261-amino acid CA domain, an additional short extracellular segment, a 26-amino acid hydrophobic transmembrane domain, and a hydrophilic C-terminal cytoplasmic tail of 29 amino acids that contains two potential phosphorylation sites. The extracellular CA domain shows 30–42% homology with known human CAs, contains all three Zn-binding histidine residues found in active CAs, and contains two potential sites for asparagine glycosylation. When expressed in COS cells, the cDNA produced a 43- to 44-kDa protein in membranes that had around one-sixth the CA activity of membranes from COS cells transfected with the same vector expressing bovine CA IV. We have designated this human protein CA XII. Northern blot analysis of normal tissues demonstrated a 4.5-kb transcript only in kidney and intestine. However, in 10% of patients with RCC, the CA XII transcript was expressed at much higher levels in the RCC than in surrounding normal kidney tissue. The CA XII gene was mapped by using fluorescence in situ hybridization to 15q22. CA XII is the second catalytically active membrane CA reported to be overexpressed in certain cancers. Its relationship to oncogenesis and its potential as a clinically useful tumor marker clearly merit further investigation.

Transcripts from a single full-length cDNA clone of hepatitis C virus are infectious when directly transfected into the liver of a chimpanzee

We have succeeded in constructing a stable full-length cDNA clone of strain H77 (genotype 1a) of hepatitis C virus (HCV). We devised a cassette vector with fixed 5′ and 3′ termini and constructed multiple full-length cDNA clones of H77 in a single step by cloning of the entire ORF, which was amplified by long reverse transcriptase–PCR, directly into this vector. The infectivity of two complete full-length cDNA clones was tested by the direct intrahepatic injection of a chimpanzee with RNA transcripts. However, we found no evidence for HCV replication. Sequence analysis of these and 16 additional full-length clones revealed that seven clones were defective for polyprotein synthesis, and the remaining nine clones had 6–28 amino acid mutations in the predicted polyprotein compared with the consensus sequence of H77. Next, we constructed a consensus chimera from four of the full-length cDNA clones with just two ligation steps. Injection of RNA transcripts from this consensus clone into the liver of a chimpanzee resulted in viral replication. The sequence of the virus recovered from the chimpanzee was identical to that of the injected RNA transcripts. This stable infectious molecular clone should be an important tool for developing a better understanding of the molecular biology and pathogenesis of HCV.

Trusted Tiny Things : Making Devices in Smart Cities More Transparent

Postprint

The macrophage/endothelial cell mannose receptor cDNA encodes a protein that binds oligosaccharides terminating with SO4-4-GalNAcβ1,4GlcNAcβ or Man at independent sites

Lutropin (LH) and other glycoproteins bearing oligosaccharides with the terminal sequence SO4-4-GalNAcβ1,4GlcNAcβ1,4Man- (S4GGnM) are rapidly removed from the circulation by an S4GGnM-specific receptor (S4GGnM-R) expressed at the surface of hepatic endothelial cells. The S4GGnM-R isolated from rat liver is closely related to the macrophage mannose-specific receptor (Man-R) isolated from rat lung both antigenically and structurally. The S4GGnM-R and Man-R isolated from these tissues nonetheless differ in their ability to bind ligands bearing terminal GalNAc-4-SO4 or Man. In this paper, we have explored the structural relationship between the Man-R and the S4GGnM-R by examining the properties of the recombinant Man-R in the form of a transmembrane protein and a soluble chimeric fusion protein in which the transmembrane and cytosolic domains have been replaced by the Fc region of human IgG1. Like the S4GGnM-R isolated from liver, the chimeric fusion protein is able to bind ligands terminating with GalNAc-4-SO4 and Man at independent sites. When expressed in CHO cells the recombinant Man-R is able to mediate the uptake of ligands bearing either terminal GalNAc-4-SO4 or terminal Man. We propose that the Man-R be renamed the Man/S4GGnM receptor on the basis of its multiple and independent specificities.

Cloning of the cDNA for the TATA-binding protein-associated factorII170 subunit of transcription factor B-TFIID reveals homology to global transcription regulators in yeast and Drosophila

The human transcription factor B-TFIID is comprised of TATA-binding protein (TBP) in complex with one TBP-associated factor (TAF) of 170 kDa. We report the isolation of the cDNA for TAFII170. By cofractionation and coprecipitation experiments, we show that the protein encoded by the cDNA encodes the TAF subunit of B-TFIID. Recombinant TAFII170 has (d)ATPase activity. Inspection of its primary structure reveals a striking homology with genes of other organisms, yeast MOT1, and Drosophila moira, which belongs to the Trithorax group. Both homologs were isolated in genetic screens as global regulators of pol II transcription. This supports our classification of B-TFIID as a pol II transcription factor and suggests that specific TBP–TAF complexes perform distinct functions during development.

cDNA cloning of Batis maritima methyl chloride transferase and purification of the enzyme

Methyl chloride transferase catalyzes the synthesis of methyl chloride from S-adenosine-l-methionine and chloride ion. This enzyme has been purified 2,700-fold to homogeneity from Batis maritima, a halophytic plant that grows abundantly in salt marshes. The purification of the enzyme was accomplished by a combination of ammonium sulfate fractionation, column chromatography on Sephadex G100 and adenosine-agarose, and TSK-250 size-exclusion HPLC. The purified enzyme exhibits a single band on SDS/PAGE with a molecular mass of approximately 22.5 kDa. The molecular mass of the purified enzyme was 22,474 Da as determined by matrix-associated laser desorption ionization mass spectrometry. The methylase can function in either a monomeric or oligomeric form. A 32-aa sequence of an internal fragment of the methylase was determined (GLVPGCGGGYDVVAMANPER FMVGLDIXENAL, where X represents unknown residue) by Edman degradation, and a full-length cDNA of the enzyme was obtained by rapid amplification of cDNA ends–PCR amplification of cDNA oligonucleotides. The cDNA gene contains an ORF of 690 bp encoding an enzyme of 230 aa residues having a predicted molecular mass of 25,761 Da. The disparity between the observed and calculated molecular mass suggests that the methylase undergoes posttranslational cleavage, possibly during purification. Sequence homologies suggest that the B. maritima methylase defines a new family of plant methyl transferases. A possible function for this novel methylase in halophytic plants is discussed.

Cloning of the cDNA encoding the large subunit of human RNase HI, a homologue of the prokaryotic RNase HII

Two RNases H of mammalian tissues have been described: RNase HI, the activity of which was found to rise during DNA replication, and RNase HII, which may be involved in transcription. RNase HI is the major mammalian enzyme representing around 85% of the total RNase H activity in the cell. By using highly purified calf thymus RNase HI we identified the sequences of several tryptic peptides. This information enabled us to determine the sequence of the cDNA coding for the large subunit of human RNase HI. The corresponding ORF of 897 nt defines a polypeptide of relative molecular mass of 33,367, which is in agreement with the molecular mass obtained earlier by SDS/PAGE. Expression of the cloned ORF in Escherichia coli leads to a polypeptide, which is specifically recognized by an antiserum raised against calf thymus RNase HI. Interestingly, the deduced amino acid sequence of this subunit of human RNase HI displays significant homology to RNase HII from E. coli, an enzyme of unknown function and previously judged as a minor activity. This finding suggests an evolutionary link between the mammalian RNases HI and the prokaryotic RNases HII. The idea of a mammalian RNase HI large subunit being a strongly conserved protein is substantiated by the existence of homologous ORFs in the genomes of other eukaryotes and of all eubacteria and archaebacteria that have been completely sequenced.

Cloning, expression, and characterization of a cDNA encoding a novel human growth factor for primitive hematopoietic progenitor cells

Multiple growth factors synergistically stimulate proliferation of primitive hematopoietic progenitor cells. A human myeloid cell line, KPB-M15, constitutively produces a novel hematopoietic cytokine, termed stem cell growth factor (SCGF), possessing species-specific proliferative activities. Here we report the molecular cloning, expression, and characterization of a cDNA encoding human SCGF using a newly developed λSHDM vector that is more efficient for differential and expression cloning. cDNA for SCGF encodes a 29-kDa polypeptide without N-linked glycosylation. SCGF transiently produced by COS-1 cells supports growth of hematopoietic progenitor cells through a short-term liquid culture of bone marrow cells and exhibits promoting activities on erythroid and granulocyte/macrophage progenitor cells in primary semisolid culture with erythropoietin and granulocyte/macrophage colony-stimulating factor, respectively. Expression of SCGF mRNA is restricted to myeloid cells and fibroblasts, suggesting that SCGF is a growth factor functioning within the hematopoietic microenvironment. SCGF could disclose some human-specific mechanisms as yet unidentified from studies on the murine hematopoietic system.