Image analysis for assessing broiler breeder behavior response to thermal environment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise cinemática e eletromiográfica do alcance em pacientes com acidente vascular encefálico

INTRODUÇÃO: O movimento de alcance é muito estudado na literatura, no entanto, poucos estudos realizam análise cinemática e eletromiográfica desse movimento em sujeitos hemiparéticos. OBJETIVO: Avaliar o alcance de indivíduos hemiparéticos pós-acidente vascular encefálico (AVE) em seus aspectos cinemáticos e eletromiográficos. MATERIAIS E MÉTODOS: Foram selecionados quatro indivíduos, idade média de 54,5 ± 10,7 anos, com diagnóstico de AVE associado à hemiparesia. Realizou-se a avaliação cinemática e eletromiográfica concomitantemente do movimento de alcance na postura sentada, tanto do lado parético quanto do não parético. RESULTADOS: Houve diferença significativa entre os sujeitos com relação ao deslocamento (F(3,63) = 3.081, p = 0.03), porém, não ocorreu diferença significativa entre os lados (F(1,63) = 1.441, p = 0.23). Com relação às articulações (ombro, cotovelo e punho), houve diferença significativa entre os deslocamentos de cada uma (F(2,63) = 27.496, p = 0.00), assim como entre as coordenadas x, y e z (F(2,63) = 36.702, p = 0.00). Na análise dos dados eletromiográficos, não houve diferença significativa entre os sujeitos (F(3,31) = 2.437, p = 0.08), entre os lados (F(1,31) = 3.384, p = 0.07) e entre os músculos (F(4,31) = 0.942, p = 0.45). Existiu diferença no tempo de execução dos movimentos quando comparado o lado não acometido com o acometido. CONCLUSÃO: As análises cinemática e eletromiográfica, de um modo geral, mostraram resultados semelhantes aos encontrados na literatura. No entanto, este estudo acrescenta uma visão mais sistematizada do movimento de alcance, considerando seus aspectos funcionais, diferindo de outros estudos por apresentar, concomitantemente, análises cinemática e eletromiográfica e por investigar ambos os membros superiores.

Karyotype characterization, constitutive heterochromatin and nucleolus organizer regions of Paranaita opima (Coleoptera, Chrysomelidae, Alticinae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estimativa da concentração espermática do sêmen de peixe pelo método de espermatócrito

Um experimento foi realizado com o objetivo de estimar a concentração espermática das espécies dourado (Salminus brasiliensis), curimba (Prochilodus lineatus), jundiá (Rhamdia quelen), cascudo-preto (Rhinelepis aspera) e tilápia-do-nilo (Oreochromis niloticus) pelo método de espermatócrito. Utilizaram-se 19, 58, 51, 43 e 85 reprodutores de dourado, curimba, jundiá, cascudo-preto e tilápia-do-nilo, respectivamente. Com exceção da tilápia-do-nilo, os reprodutores foram submetidos ao processo de indução hormonal e posteriormente submetidos a coleta de sêmen. Foram comparadas as técnicas de mensuração da concentração espermática do sêmen por contagem em câmara hematimétrica de Neubauer e por espermatócrito. Os resultados obtidos foram submetidos à análise de regressão a 5% de probabilidade. As concentrações espermáticas mensuradas por ambas as técnicas apresentaram relação linear, para curimbas, jundiás e tilápias-do-nilo, com equações y = 6,6624 × 10(9) + 3,68553 × 10(8)x; y = 2,153 × 10(9) + 4,426 × 10(8)x e y = -9,0897 × 10(8) + 6,0167 × 10(8), respectivamente. O método de espermatócrito pode ser utilizado para estimar a concentração espermática do sêmen de curimbas, jundiás e tilápias-do-nilo.

Energy-transfer mechanisms and emission quantum yields in Eu3+-based siloxane-poly(oxyethylene) nanohybrids

We report the energy-transfer mechanisms and emission quantum yield measurements of sol-gel-derived Eu3+-based nanohybrids. The matrix of these materials, classified as diureasils and termed U(2000) and U(600), includes urea cross-links between a siliceous backbone and polyether-based segments of two molecular weights, 2000 and 600, respectively. These materials are full-color emitters in which the Eu3+ (5)Do --> F-7(0-4) lines merge with the broad green-blue emission of the nanoscopic matrix's backbone. The excitation spectra show the presence of a large broad band (similar to 27000-29000 cm(-1)) undoubtedly assigned to a ligand-to-metal charge-transfer state. Emission quantum yields range from 2% to 13.0% depending on the polymer molecular weight and Eu3+ concentration. Energy transfer between the hybrid hosts and the cations arises from two different and independent processes: the charge-transfer band and energy transfer from the hybrid's emitting centers. The activation of the latter mechanisms induces a decrease in the emission quantum yields (relative to undoped nanohybrids) and permits a fine-tuning of the emission chromaticity across the Comission Internacionalle d'Eclairage diagram, e.g., (x, y) color coordinates from (0.21, 0.24) to (0.39, 0.36). Moreover, that activation depends noticeably on the ion local coordination. For the diureasils with longer polymer chains, energy transfer occurs as the Eu3+ coordination involves the carbonyl-type oxygen atoms of the urea bridges, which are located near the hybrid's host emitting centers. on the contrary, in the U(600)-based diureasils, the Eu3+ ions are coordinated to the polymer chains, and therefore, the distance between the hybrid's emitting centers and the metal ions is large enough to allow efficient energy-transfer mechanisms.

Glass structure and ion dynamics of lead-cadmium fluorgermanate glasses

Glass structure and fluorine motion dynamics are investigated in lead-cadmium fluorgermanate glasses by means of differential scanning calorimetry, Raman scattering, x-ray absorption (EXAFS), electrical conductivity (EC), and F-19 nuclear magnetic resonance (NMR) techniques. Glasses with composition 60PbGeO(3)-xPbF(2)-yCdF(2) (in mol %), with x+y=40 and x=10, 20, 30, 40, are studied. Addition of metal fluorides to the base PbGeO3 glass leads to a decrease of the glass transition temperature (T-g) and to an enhancement of the ionic conductivity properties. Raman and EXAFS data analysis suggest that metagermanate chains form the basic structural feature of these glasses. The NMR study leads to the conclusion that the F-F distances are similar to those found in pure crystalline phases. Experimental results suggest the existence of a heterogeneous glass structure at the molecular scale, which can be described by fluorine rich regions permeating the metagermanate chains. The temperature dependence of the NMR line shapes and relaxation times exhibits the qualitative and quantitative features associated with the high fluorine mobility in these systems. (C) 2004 American Institute of Physics.

A THEORETICAL RESULT ON PHASE-LAG

We prove a Theoretical result which relates phase-lag to the error constant of a numerical method for periodic problem y'' = f(x, y).

Properties and one-step synthesis of (2-acetylpyridine)tetraammineruthenium(II), [Ru-II(2-acpy)(NH3)(4)](2+) and tetraammine(2-benzoylpyridine)ruthenium(II), [Ru-II(NH3)(4)(2-bzpy)](2+) Redox potentials, UV-Vis and NMR spectra

A more direct and efficient route to the syntheses of [Ru(NH3)(4)(X-Y)](BF4)(2), where X-Y can be 2-acetylpyridine (2-acpy) or 2-benzoylpyridine (2-bzpy), based on the reactions of [RuCl(NH3)(5)]Cl-2 with these ortho-substituted azines is described. The [Ru(2-acpy)(NH3)(4)](BF4)(2) and [Ru(NH3)(5)(2-bzpy)](BF4)(2) complexes have a molar conductance of 328 and 292 Ohm(-1) cm(2) mol(-1), respectively, corresponding to a 1:2 species in solution. These complexes showed two intense absorption bands around 620-650 and 380 nm, the energies of which are solvent dependent, decreasing with the increase of the Gutman's donor number of the solvent, and were assigned as metal-to-ligand charge transfer (MLCT). The complexes have oxidation potentials (Ru-II/III) of +0.380 V vs. Ag/AgCl (2-acpy) and +0.400 V vs. Ag/AgCl (2-bzpy), and reduction potentials (X-Y0/-) of -1.10 V vs. Ag/AgCl (2-acpy) and -0.950 V vs. Ag/AgCl (2-bzpy) on CF3COOH/NaCF3COO at pH=3.0, scan rate 100 mV s(-1), [Ru]=1.0x10(-3) mol l(-1). Both processes show a coupled chemical reaction. Upon oxidation of the metal center, the MLCT absorption bands are bleached and restored upon subsequent reduction. In order to confirm the structure of the complexes a detailed LH NMR investigation was performed in d(6)-acetone. Further confirmation of the structure was obtained by recording the N-15 NMR spectrum of [Ru(NH3)(4)(2-bzpy)](2+) in d(6)-DMSO using the INEPT pulse sequence improving the sensitivity of N-15 by polarization transfer from the protons to the N-15. The Nuclear Overhauser Effect (NOE) experiments were made qualitatively for [Ru(NH3)(4)(2-acpy)](2+), and showed that H-6 of the pyridine is close to a NH3 proton, which should then be in a cis position, and, hence, confirming that acpy is acting as a bidentate ligand. (C) 1999 Elsevier B.V. Ltd. All rights reserved.

Mercury(II) and thallium(III) organometallic derivatives of 2-Mercaptobenzoxazole

Some derivatives of 2-mercaptobenzoxazole (HL) of the type MRnL [M = Hg or Tl, R = Me or Ph and n = 1 (Hg) or 2 (Tl)] have been prepared. The structure of HgMeL has been determined by an X-ray diffraction study; in the crystal there are two independent planar molecules in each asymmetric unit, with the ligand in its thiolic form and an almost linear CHgS linkage. Weak intramolecular and intermolecular secondary interactions complement the mercurysulphur bond. The spectroscopic (IR, Raman, mass, 13C-NMR), conductimetric, and dipolar properties of this and the other compounds are discussed. © 1991.

Some comments on the bi(tri)-Hamiltonian structure of generalized AKNS and DNLS hierarchies

We give the correct prescriptions for the terms involving ∂ -1 xδ(x - y), in the Hamiltonian structures of the AKNS and DNLS systems, necessary for the Jacobi identities to hold. We establish that the sl(2) and sl(3) AKNS systems are tri-Hamiltonians and construct two compatible Hamiltonian structures for the sl(n) AKNS system. We give a method for the derivation of the recursion operator for the sl(n + 1) DNLS system, and apply it explicitly to the sl(2) case, showing that such a system is tri-Hamiltonian. © 1998 Elsevier Science B.V.

Lamé differential equations and electrostatics

The problem of existence and uniqueness of polynomial solutions of the Lamé differential equation A(x)y″ + 2B(x)y′ + C(x)y = 0, where A(x),B(x) and C(x) are polynomials of degree p + 1,p and p - 1, is under discussion. We concentrate on the case when A(x) has only real zeros aj and, in contrast to a classical result of Heine and Stieltjes which concerns the case of positive coefficients rj in the partial fraction decomposition B(x)/A(x) = ∑j p=0 rj/(x - aj), we allow the presence of both positive and negative coefficients rj. The corresponding electrostatic interpretation of the zeros of the solution y(x) as points of equilibrium in an electrostatic field generated by charges rj at aj is given. As an application we prove that the zeros of the Gegenbauer-Laurent polynomials are the points of unique equilibrium in a field generated by two positive and two negative charges. © 2000 American Mathematical Society.

Chlorine evolution during the fusion of chlorofluoroindate glasses

Samples with a composition of 40InF 3-20ZnF 2-5MCl- xBaF 2-ySrF 2, where M=Na, Li and x+y=35 mol%, were prepared. The thermal properties related to the Ba/Sr ratio and to the remaining chlorine content in the glasses were studied. Thermal stability is improved with the addition of chlorine. However, chlorine concentration is regulated by the sublimation of indium fluorides which takes place at about 600°C. Indium fluorides arc formed during glass fusion. The mechanisms of chlorine sublimation were studied. © 2005 Akadémiai Kiadó, Budapest.

Effects of electroplated zinc-nickel alloy coatings on the fatigue strength of AISI 4340 high strength steel

It is well known that fatigue behaviour is an important parameter to be considered in mechanical components subjected to constant and variable amplitude loadings. In combination with corrosion phenomenon, fatigue effects were responsible for proximally 64% of fails that occur in metallic parts of aeronautical accidents in the last 30 years. Recovered substrates have been extensively used in the aerospace field. Cadmium electroplating has been widely applied to promote protective coatings in aeronautical components, resulting in excellent corrosion protection combined with a good performance in cyclic loading. Ecological considerations allied to the increasing demands for corrosion resistance, resulted in the search for possible alternatives. Zinc-nickel alloys received considerable interest recently, since these coatings showed some advantages such as a good resistance to white and red rust, high plating rates and acceptation in the market. In this study the effects of zinc-nickel coatings electroplated on AISI 4340 high strength steel were analysed on rotating bending and axial fatigue strength, corrosion and adhesion resistance. Compressive residual stress field was measured by a X-ray tensometry prior to fatigue tests. Optical microscopy images showed coating thicknesses, adhesion and the existence of an uniform coverage of nearly all substrates. The fractured fatigue specimens were investigated using a scanning electron microscope. Three different zinc-nickel coating thicknesses were tested and comparison with rotating bending fatigue data from specimens cadmium electroplated and heat treated at 190°C for 3, 8 and 24 hours to avoid the diffusion of hydrogen in the substrate, was performed. Experimental results showed effect of coatings on the AISI 4340 steel behaviour when submitted to fatigue testing and the existence of coating thickness influence on the fatigue strength.

Remarks on orthotropic elastic models applied to wood

Wood is generally considered an anisotropic material. In terms of engineering elastic models, wood is usually treated as an orthotropic material. This paper presents an analysis of two principal anisotropic elastic models that are usually applied to wood. The first one, the linear orthotropic model, where the material axes L (Longitudinal), R(radial) and T(tangential) are coincident with the Cartesian axes (x, y, z), is more accepted as wood elastic model. The other one, the cylindrical orthotropic model is more adequate of the growth caracteristics of wood but more mathematically complex to be adopted in practical terms. Specifically due to its importance in wood elastic parameters, this paper deals with the fiber orientation influence in these models through adequate transformation of coordinates. As a final result, some examples of the linear model, which show the variation of elastic moduli, i.e., Young's modulus and shear modulus, with fiber orientation are presented.