Quasi-3D Cytoskeletal Dynamics of Osteocytes under Fluid Flow

Osteocytes respond to dynamic fluid shear loading by activating various biochemical pathways, mediating a dynamic process of bone formation and resorption. Whole-cell deformation and regional deformation of the cytoskeleton may be able to directly regulate this process. Attempts to image cellular deformation by conventional microscopy techniques have been hindered by low temporal or spatial resolution. In this study, we developed a quasi-three-dimensional microscopy technique that enabled us to simultaneously visualize an osteocyte's traditional bottom-view profile and a side-view profile at high temporal resolution. Quantitative analysis of the plasma membrane and either the intracellular actin or microtubule (MT) cytoskeletal networks provided characterization of their deformations over time. Although no volumetric dilatation of the whole cell was observed under flow, both the actin and MT networks experienced primarily tensile strains in all measured strain components. Regional heterogeneity in the strain field of normal strains was observed in the actin networks, especially in the leading edge to flow, but not in the MT networks. In contrast, side-view shear strains exhibited similar subcellular distribution patterns in both networks. Disruption of MT networks caused actin normal strains to decrease, whereas actin disruption had little effect on the MT network strains, highlighting the networks' mechanical interactions in osteocytes.

Morfologia e dispersão dos frutos de espécies da Caatinga ameaçadas de extinção.

Este trabalho teve por objetivo estudar a morfologia e as síndromes de dispersão de Myracrodruon urundeuva, Schinopsis brasiliensis (Anacardiaceae), Sideroxylon obtusifolium (Sapotaceae) e Amburana cearensis (Leguminosae), contribuindo para o entendimento da ecologia dessas espécies, em área de Caatinga, na Reserva Legal do Projeto Salitre, Juazeiro, BA. Para os estudos morfológicos, 200 frutos de cada espécie foram coletados em diferentes indivíduos da população e mensurados. De acordo com o tipo de fruto, foi adotado um método de avaliação da dispersão dos diásporos em campo: parcelas de 1m2 para os frutos secos e observação em campo no período de 5h às 18h, para os frutos carnosos. Para avaliar a taxa de sobrevivência no campo, plântulas das quatro espécies foram identificadas e acompanhadas quinzenalmente por um período de 6 meses. M. urundeuva, S. brasiliensis e A. cearensis apresentaram frutos secos do tipo anemocórico enquanto S. obtusifolium apresentou frutos carnosos adaptados à dispersão zoocórica, podendo ser considerada como importante fonte alimentar para a avifauna da região. Quanto ao estabelecimento das plantas jovens, verificou-se que nas espécies anemocóricas a dispersão ocorre a curta distância, o que ocasionaria a distribuição agregada das mesmas. Para as espécies anemocóricas foram registradas taxas de sobrevivência inferiores a 30%, indicando que o recrutamento de plantas jovens está comprometido, podendo estar associado às condições climáticas adversas e à predação por animais silvestres e domésticos.

Correlatos de bem-estar espiritual de indivíduos em reabilitação cardíaca pós-enfarte agudo do miocárdio

Dissertação de Mestrado apresentada à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Psicologia Clínica e da Saúde.

Artrite idiopática juvenil

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

Gait and behavior in an IL1β-mediated model of rat knee arthritis and effects of an IL1 antagonist.

Interleukin-1 beta (IL1β) is a proinflammatory cytokine that mediates arthritic pathologies. Our objectives were to evaluate pain and limb dysfunction resulting from IL1β over-expression in the rat knee and to investigate the ability of local IL1 receptor antagonist (IL1Ra) delivery to reverse-associated pathology. IL1β over-expression was induced in the right knees of 30 Wistar rats via intra-articular injection of rat fibroblasts retrovirally infected with human IL1β cDNA. A subset of animals received a 30 µl intra-articular injection of saline or human IL1Ra on day 1 after cell delivery (0.65 µg/µl hIL1Ra, n = 7 per group). Joint swelling, gait, and sensitivity were investigated over 1 week. On day 8, animals were sacrificed and joints were collected for histological evaluation. Joint inflammation and elevated levels of endogenous IL1β were observed in knees receiving IL1β-infected fibroblasts. Asymmetric gaits favoring the affected limb and heightened mechanical sensitivity (allodynia) reflected a unilateral pathology. Histopathology revealed cartilage loss on the femoral groove and condyle of affected joints. Intra-articular IL1Ra injection failed to restore gait and sensitivity to preoperative levels and did not reduce cartilage degeneration observed in histopathology. Joint swelling and degeneration subsequent to IL1β over-expression is associated limb hypersensitivity and gait compensation. Intra-articular IL1Ra delivery did not result in marked improvement for this model; this may be driven by rapid clearance of administered IL1Ra from the joint space. These results motivate work to further investigate the behavioral consequences of monoarticular arthritis and sustained release drug delivery strategies for the joint space.

Neural network analysis identifies scaffold properties necessary for in vitro chondrogenesis in elastin-like polypeptide biopolymer scaffolds.

The successful design of biomaterial scaffolds for articular cartilage tissue engineering requires an understanding of the impact of combinations of material formulation parameters on diverse and competing functional outcomes of biomaterial performance. This study sought to explore the use of a type of unsupervised artificial network, a self-organizing map, to identify relationships between scaffold formulation parameters (crosslink density, molecular weight, and concentration) and 11 such outcomes (including mechanical properties, matrix accumulation, metabolite usage and production, and histological appearance) for scaffolds formed from crosslinked elastin-like polypeptide (ELP) hydrogels. The artificial neural network recognized patterns in functional outcomes and provided a set of relationships between ELP formulation parameters and measured outcomes. Mapping resulted in the best mean separation amongst neurons for mechanical properties and pointed to crosslink density as the strongest predictor of most outcomes, followed by ELP concentration. The map also grouped formulations together that simultaneously resulted in the highest values for matrix production, greatest changes in metabolite consumption or production, and highest histological scores, indicating that the network was able to recognize patterns amongst diverse measurement outcomes. These results demonstrated the utility of artificial neural network tools for recognizing relationships in systems with competing parameters, toward the goal of optimizing and accelerating the design of biomaterial scaffolds for articular cartilage tissue engineering.

Functional properties of cell-seeded three-dimensionally woven poly(epsilon-caprolactone) scaffolds for cartilage tissue engineering.

Articular cartilage possesses complex mechanical properties that provide healthy joints the ability to bear repeated loads and maintain smooth articulating surfaces over an entire lifetime. In this study, we utilized a fiber-reinforced composite scaffold designed to mimic the anisotropic, nonlinear, and viscoelastic biomechanical characteristics of native cartilage as the basis for developing functional tissue-engineered constructs. Three-dimensionally woven poly(epsilon-caprolactone) (PCL) scaffolds were encapsulated with a fibrin hydrogel, seeded with human adipose-derived stem cells, and cultured for 28 days in chondrogenic culture conditions. Biomechanical testing showed that PCL-based constructs exhibited baseline compressive and shear properties similar to those of native cartilage and maintained these properties throughout the culture period, while supporting the synthesis of a collagen-rich extracellular matrix. Further, constructs displayed an equilibrium coefficient of friction similar to that of native articular cartilage (mu(eq) approximately 0.1-0.3) over the prescribed culture period. Our findings show that three-dimensionally woven PCL-fibrin composite scaffolds can be produced with cartilage-like mechanical properties, and that these engineered properties can be maintained in culture while seeded stem cells regenerate a new, functional tissue construct.

Chondrogenesis and mineralization during in vitro culture of human mesenchymal stem cells on three-dimensional woven scaffolds.

Human mesenchymal stem cells (hMSCs) and three-dimensional (3D) woven poly(ɛ-caprolactone) (PCL) scaffolds are promising tools for skeletal tissue engineering. We hypothesized that in vitro culture duration and medium additives can individually and interactively influence the structure, composition, mechanical, and molecular properties of engineered tissues based on hMSCs and 3D poly(ɛ-caprolactone). Bone marrow hMSCs were suspended in collagen gel, seeded on scaffolds, and cultured for 1, 21, or 45 days under chondrogenic and/or osteogenic conditions. Structure, composition, biomechanics, and gene expression were analyzed. In chondrogenic medium, cartilaginous tissue formed by day 21, and hypertrophic mineralization was observed in the newly formed extracellular matrix at the interface with underlying scaffold by day 45. Glycosaminoglycan, hydroxyproline, and calcium contents, and alkaline phosphatase activity depended on culture duration and medium additives, with significant interactive effects (all p < 0.0001). The 45-day constructs exhibited mechanical properties on the order of magnitude of native articular cartilage (aggregate, Young's, and shear moduli of 0.15, 0.12, and 0.033 MPa, respectively). Gene expression was characteristic of chondrogenesis and endochondral bone formation, with sequential regulation of Sox-9, collagen type II, aggrecan, core binding factor alpha 1 (Cbfα1)/Runx2, bone sialoprotein, bone morphogenetic protein-2, and osteocalcin. In contrast, osteogenic medium produced limited osteogenesis. Long-term culture of hMSC on 3D scaffolds resulted in chondrogenesis and regional mineralization at the interface between soft, newly formed engineered cartilage, and stiffer underlying scaffold. These findings merit consideration when developing grafts for osteochondral defect repair.

Mechanical regulation of chondrogenesis.

Mechanical factors play a crucial role in the development of articular cartilage in vivo. In this regard, tissue engineers have sought to leverage native mechanotransduction pathways to enhance in vitro stem cell-based cartilage repair strategies. However, a thorough understanding of how individual mechanical factors influence stem cell fate is needed to predictably and effectively utilize this strategy of mechanically-induced chondrogenesis. This article summarizes some of the latest findings on mechanically stimulated chondrogenesis, highlighting several new areas of interest, such as the effects of mechanical stimulation on matrix maintenance and terminal differentiation, as well as the use of multifactorial bioreactors. Additionally, the roles of individual biophysical factors, such as hydrostatic or osmotic pressure, are examined in light of their potential to induce mesenchymal stem cell chondrogenesis. An improved understanding of biomechanically-driven tissue development and maturation of stem cell-based cartilage replacements will hopefully lead to the development of cell-based therapies for cartilage degeneration and disease.

Mechanobiology of the meniscus.

The meniscus plays a critical biomechanical role in the knee, providing load support, joint stability, and congruity. Importantly, growing evidence indicates that the mechanobiologic response of meniscal cells plays a critical role in the physiologic, pathologic, and repair responses of the meniscus. Here we review experimental and theoretical studies that have begun to directly measure the biomechanical effects of joint loading on the meniscus under physiologic and pathologic conditions, showing that the menisci are exposed to high contact stresses, resulting in a complex and nonuniform stress-strain environment within the tissue. By combining microscale measurements of the mechanical properties of meniscal cells and their pericellular and extracellular matrix regions, theoretical and experimental models indicate that the cells in the meniscus are exposed to a complex and inhomogeneous environment of stress, strain, fluid pressure, fluid flow, and a variety of physicochemical factors. Studies across a range of culture systems from isolated cells to tissues have revealed that the biological response of meniscal cells is directly influenced by physical factors, such as tension, compression, and hydrostatic pressure. In addition, these studies have provided new insights into the mechanotransduction mechanisms by which physical signals are converted into metabolic or pro/anti-inflammatory responses. Taken together, these in vivo and in vitro studies show that mechanical factors play an important role in the health, degeneration, and regeneration of the meniscus. A more thorough understanding of the mechanobiologic responses of the meniscus will hopefully lead to therapeutic approaches to prevent degeneration and enhance repair of the meniscus.

Elucidating the Molecular Composition of Cartilage by Proteomics.

Articular cartilage consists of chondrocytes and two major components, a collagen-rich framework and highly abundant proteoglycans. Most prior studies defining the zonal distribution of cartilage have extracted proteins with guanidine-HCl. However, an unextracted collagen-rich residual is left after extraction. In addition, the high abundance of anionic polysaccharide molecules extracted from cartilage adversely affects the chromatographic separation. In this study, we established a method for removing chondrocytes from cartilage sections with minimal extracellular matrix protein loss. The addition of surfactant to guanidine-HCl extraction buffer improved protein solubility. Ultrafiltration removed interference from polysaccharides and salts. Almost four-times more collagen peptides were extracted by the in situ trypsin digestion method. However, as expected, proteoglycans were more abundant within the guanidine-HCl extraction. These different methods were used to extract cartilage sections from different cartilage layers (superficial, intermediate, and deep), joint types (knee and hip), and disease states (healthy and osteoarthritic), and the extractions were evaluated by quantitative and qualitative proteomic analyses. The results of this study led to the identifications of the potential biomarkers of osteoarthritis (OA), OA progression, and the joint specific biomarkers.

Ozono troposférico como modulador de la interacción planta herbívoro

Una de las consecuencias de la actividad humana en zonas densamente pobladas es la contaminación atmosférica, que genera condiciones propicias para la acumulación de ozono (O3) en la troposfera. Se plantea la necesidad de comprender el efecto de los contaminantes atmosféricos sobre las interacciones entre las plantas y sus plagas. En esta tesis se caracterizaron las respuestas de las plantas a la infestación con áfidos. Se estudió cómo se modifican dichas respuestas en ambientes con diferente grado de contaminación por O3 y sus consecuencias sobre la dinámica poblacional de los insectos. Las plantas de rúcula y tomate fueron capaces de desarrollar defensa inducida por la infestación de áfidos, la que fue desarticulada por una alta infestación de insectos o por infestaciones prolongadas. En ambas especies, la tasa de crecimiento poblacional de áfidos fue proporcional al aumento de densidad inicial, lo que sugiere que la población de insectos no tuvo un control densodependiente. El crecimiento de las poblaciones cesó a distintas densidades, posiblemente por la acción de mecanismos relacionados con el balance oxidativo en la planta huésped. El O3 produjo disminución en el tejido verde mientras que no se detectaron cambios relacionados con la infestación de áfidos, aunque el daño por O3, fue menor en las plantas infestadas con áfidos que en el control. Sin embargo, la alometría y el tamaño de las plantas fueron sensibles a ambos factores, disminuyéndose principalmente la biomasa de las raíces y la biomasa total de las plantas. El crecimiento de la población de áfidos en ambientes libres de O3 disminuyó en un 50 por ciento cuando los áfidos provenían de plantas que habían sido expuestas a ozono. El balance entre la producción de especies de oxígeno reactivas (ROS) y la capacidad antioxidante de la planta parece haber sido determinante en estas interacciones. La herbivoría indujo la síntesis de alta concentración de antioxidantes, que varió a lo largo del experimento. Asimismo la exposición al O3 afectó el balance de los antioxidantes, creando una dinámica con aumentos y reducciones menores a los inducidos por los áfidos. La dinámica del balance de antioxidantes fue diferente cuando los factores de estrés actuaron simultáneamente, manteniéndose en valores bajos con una tendencia a aumentar en el tiempo. Los resultados de esta tesis permiten concluir que el impacto del O3 sobre el crecimiento de la población de áfidos va a depender del orden de exposición de las plantas a los factores de estrés. La capacidad de infestación dependerá de la impronta en los áfidos de las condiciones previas y del estado oxidativo de la planta a colonizar. En consecuencia, la probabilidad de epidemias estará determinada por la heterogeneidad de los parches, la historia de los individuos y de la dinámica de migraciones de los insectos

Efecto interactivo de la defoliación del estrato herbáceo y la cobertura del estrato arbóreo sobre el crecimiento del estrato herbáceo en sistemas silvopastoriles

El crecimiento demográfico y las actuales y futuras consecuencias del cambio climático hacen necesario maximizar la eficiencia productiva y ambiental de los sistemas de producción agrícola. Los sistemas silvopastoriles forman parte de las prácticas agroecológicas que permiten cumplir con este objetivo a partir de la sinergia lograda al complementar la actividad ganadera con la forestal a nivel de predio. La diversificación productiva provee al sistema alta estabilidad y resiliencia económica y ambiental. En el N.O. de Patagonia, lugar donde se desarrolló la presente tesis, los sistemas silvopastoriles basados en forestaciones de Pinus ponderosa implantadas sobre pastizales naturales de Festuca pallescens permitirían conjugar la tradicional ganadería extensiva con la incipiente actividad forestal. El desarrollo de sistemas silvopastoriles en base a estas especies será factible si el balance neto de las interacciones biológicas de competencia y facilitación entre ambos componentes es neutro o positivo. El aprovechamiento forrajero del pastizal, objetivo primario de la producción herbácea en los sistemas silvopastoriles, implica considerar el efecto de la defoliación. La defoliación, al disminuir la biomasa aérea, provoca cambios en la disponibilidad de luz y en las señales lumínicas que la planta percibe, disminuye la transpiración y puede atenuar el estrés hídrico. La presencia del estrato arbóreo en los sistemas silvopastoriles también actúa sobre la disponibilidad de luz y el estado hídrico de las plantas del estrato herbáceo. Dependiendo del tamaño de los árboles y el manejo silvícola aplicado, la cantidad y calidad de luz que alcanza el sotobosque disminuyen. Asimismo, los árboles pueden competir por el agua disponible en suelo o disminuir la demanda atmosférica que experimentan los pastos por efecto del sombreo. El resultado neto de ambos efectos determinará el estado hídrico de las plantas del estrato herbáceo (...)

Taninos condensados en leguminosas del género Lotus : estudio de sus funciones biológicas y evaluación de su utilidad en el mejoramiento de la calidad forrajera de especies de importancia agronómica

Algunas especies del género Lotus son utilizadas como forrajeras en ambientes de menor aptitud agrícola, las cuales presentan contenidos variables de taninos condensados (TC). La optimización del contenido de TC constituye un objetivo tecnológico de mejora en la calidad forrajera de las leguminosas. L. tenuis es considerada relativamente tolerante a diferentes estreses ambientales, pero no existen reportes relacionados a la optimización de sus niveles de TC. Debido a ello y utilizando el protocolo DMACA-HCl, se cuantificaron los niveles de TC en numerosas poblaciones de L. tenuis, observándose niveles inferiores a los recomendados para leguminosas forrajeras y quedando en evidencia simultáneamente, que no es posible su optimización por selección recurrente. Ello motivó el interés en evaluar la hibridización interespecífica entre L. tenuis y una población seleccionada de L. corniculatus como alternativa tecnológica de mejora. De esta manera, se obtuvo un material con mejores características forrajeras y mayor tolerancia al estrés salino. A su vez, estos materiales resultaron de interés para el estudio de la regulación transcripcional de los genes relacionados a la biosíntesis de TC, observándose que no dependen únicamente de los factores de transcripción y genes que presentan un papel central en otras especies. Por último, en ensayos de inoculación con rizobios, se determinó que los niveles de TC en raíces de Lotus no se encuentran relacionados a la especificidad de la simbiosis y que la formación de nódulos inefectivos determina un incremento en los niveles de estos metabolitos secundarios