L'Emmagatzematge de cereals en sitges d'època ibèrica al nord-est de Catalunya

Una sitja és una cavitat subterrània destinada a emmagatzemar la collita, especialment de cereals. Amb el manteniment d'unes condicions ideal de temperatura i humitat els cereals s'hi poden conservar durant un llarg període de temps, que segons Varró podria arribar als 50 anys. Aquestes excepcionals possibilitats han possibilitat que l'emmagatzematge en sitges fos un dels mètodes de conservació de cereals a llarg termini més utilitzat en les societats pre-industrials de tot el món. La sitja estàndard del nord-est de Catalunya és aquella que era excavada a l'argila, no portava revestiment i tenia la boca en forma de tub, de 0,77 m de diàmetre màxim per 0,42 de profunditat. El perfil era de tipus còncau, amb el diàmetre màxim situat en el terç central de la sitja, i un fons indistintament còncau o pla. La profunditat i el diàmetre màxim es situarien entre 1,75 i 2 m., amb un marge de diferència reduïdíssim entre ambdues mesures. La capacitat resultant d'aquestes dimensions se situaria entre 1 i 3 tones de cereals, que en termes estàndards de producció seria el resultat de la collita d'una extensió d'entre 1,5 i 4 hectàrees de terreny. ASBTRACT: A silo is an underground cavity designed to store the harvest, especially grain. With the maintenance of ideal conditions of temperature and moisture grains can be preserved for a long period of time, according to Varró it could reach 50 years. These exceptional opportunities have enabled the storage silos to be one of the methods of long-term conservation of grain used in most pre-industrial societies around the world. The standard silo from the North-East of Catalonia was excavated in clay,it had no siding and its mouth was tube-shaped, up to 0.77 m of maximum diameter to 0.42 deep. The profile was concave, with maximum diameter located in the central third of the silo, and a background either concave or flat. The depth and maximum diameter are located between 1.75 and 2 m, with a very little margin of difference between the two measures. The capacity resulting from these dimensions would be located between 1 and 3 tons of cereals, which in terms of production standards it would mean a harvest of between 1.5 and 4 hectares of ground.

Avaliação escolar no ensino superior de letras: entre o discurso e a prática

O objeto desta pesquisa é a avaliação da aprendizagem, tendo como foco central a análise dos discursos e práticas dos professores de Cursos de Licenciatura de Letras. Este estudo foi desenvolvido com docentes de duas instituições de ensino superior do interior do estado da Paraíba, localizado no nordeste brasileiro. O objetivo geral deste estudo é: analisar as semelhanças, diferenças e contradições resultantes da comparação entre os discursos e o que se pratica na avaliação da aprendizagem dos professores de Letras do Ensino Superior de uma instituição de ensino superior particular de Patos/PB e os de uma pública de Catolé do Rocha/PB. Esta foi uma pesquisa qualitativa com uma amostra de cinco docentes de cada estabelecimento de ensino superior, somando-se dez ao todo. Foram feitas entrevistas com perguntas abertas e fechadas, cujas respostas tiveram uma análise de conteúdo, e o resultado desta foi confrontado com os dados da observação das práticas de sala de aula dos professores da amostra. Constatou-se que há casos de professores que têm discursos diferentes da sua prática de avaliação da aprendizagem. Há também problemas de interação entre docentes e discentes em relação à avaliação da aprendizagem que aumentam o índice de reprovação do alunado, o que poderia ser evitado. No entanto, de modo geral há um compromisso com a qualidade de ensino dos docentes entrevistados. Os autores e teóricos que inspiraram esta pesquisa foram: Wachowicz (2000), Castanho (2000), Berbel (2001), Sacristán e Gómez (1998), Hoffman (1996 e 2003), Luckesi (1994), Vasconcelos (2000) e Villas Boas (2000), entre outros.

Cerzindo a rede da memória: estudo sobre a construção de identidades no Bairro Maré

Estudo de caso sobre a construção de memórias e identidades sociais no Bairro da Maré, a partir do acervo fotográfico do Arquivo Documental Orosina Vieira - ADOV, criado por um grupo de indivíduos que militam na organização não-governamental denominada Centro de Estudos e Ações Solidárias da Maré (CEASM). Constituem os objetivos desta pesquisa a análise dos processos de criação do ADOV, uma reflexão sobre o acervo resultante destas políticas de aquisição e uma abordagem sobre a exposição fotográfica “Memórias da Maré”, encaradas enquanto estratégias de construção da memória e identidades do Bairro Maré. Este estudo utilizou o método antropológico da observação participante e a pesquisa documental. (Dissertação de Mestrado em Museologia (Mestrado Memória Social - UNIRIO)

Nanopartículas de PCL com acetato de hidrocortisona como uma terapia dermatológica inovadora para a dermatite atópica

A dermatite atópica é uma patologia cutânea crónica que requer cuidados intensivos da pele e tratamento farmacológico; contudo, os tratamentos disponíveis necessitam urgentemente de ser melhorados, especialmente quando utilizados por períodos longos ou em grupos específicos (ex: crianças). A nanotecnologia tem contribuído com sistemas de veiculação inovadores e pode oferecer terapias efectivas e direcionadas. Os objectivos deste estudo centraram-se na preparação caracterização das nanopartículas de policaprolactona carregadas com acetato de hidrocortisona em termos das propriedades físico-químicas, eficiência de encapsulação, ensaios de libertação in vitro e ensaios de segurança dos excipientes utilizados em voluntários humanos. As nanopartículas produzidas apresentaram um tamanho médio de 258,4 24,5 nm e um índice de polidispersão de 0,084. O potencial zeta foi -4,39 0,62 mV e a eficiência de encapsulação foi 36,32 0,03 %. A libertação in vitro do fármaco foi controlada ao longo do tempo. Além disso, os testes de segurança indicaram que os excipientes foram bem tolerados. Este estudo demonstra que as nanopartículas de policaprolactona são sistemas estáveis para veiculação de acetato de hidrocortisona que poderão conduzir a uma libertação prolongada do fármaco, com resultados promissores ao nível da sua segurança quando aplicados na pele humana.

A segurança estrutural na reabilitação de património habitacional composto por elementos pré-fabricados

Pretende-se no presente artigo analisar a segurança estrutural do tipo de edificações referido, durante o seu processo de reabilitação. Considerando a existência de três momentos diferentes – o período antecedente ao início dos trabalhos, o intervalo de tempo correspondente ao decurso dos trabalhos de reabilitação e o período posterior, correspondente à futura utilização do património, é sobre o segundo que incidirá a nossa análise, por ser aquele em que a estrutura se encontra mais fragilizada, implicando uma menor segurança estrutural, que tende a ser desvalorizada, por ter uma natureza temporária. Numa primeira fase descreve-se o existente, assim como as alterações arquitetónicas propostas. Posteriormente indicam-se os potenciais danos estruturais resultantes das alterações pretendidas e as principais medidas a considerar para os evitar. Numa fase posterior propõe-se a sequenciação dos trabalhos de modo a evitar um colapso parcial ou global e, por último, apresentam-se conclusões e sugerem-se desenvolvimentos futuros. / The present work seeks to present an analysis related to the structural safety of prefabricated buildings, referred above, associated it’s rehabilitation process. Considering the existence of three different moments – a first period before the beginning of the works, a second one correspondent to the rehabilitation procedures and a last one related with the future utilization of the patrimony, this article will focus on the second period, because during that gap of time, the structure is usually weakened, which implies a lower structural safety that tends to be ignored, due to its temporary nature. In a first moment, the existing construction is described, as well as the architectonical proposals. Afterwards, are referred the potential structural damages resultant of the architectonical proposals and the measures to implemented to prevent them. In the posterior phase we propose the work sequence, in order to avoid a partial or global collapse and, finally, we reach some conclusions and suggest other works to be developed in the future.

A segurança estrutural relacionada com a escavação sob fundações de edifícios pré-existentes

Pretende-se no presente artigo analisar a segurança estrutural de edificações condicionadas por escavações a um nível inferior ao das suas fundações. Considerando a existência de três momentos diferentes – o período antecedente ao início dos trabalhos, o intervalo de tempo correspondente ao decurso dos trabalhos de reabilitação e o período posterior, correspondente à futura utilização do património, é sobre o segundo que incidirá a nossa análise, por ser aquele em que a estrutura se encontra mais fragilizada, implicando uma menor segurança estrutural, que tende a ser desvalorizada, por ter uma natureza temporária. Numa primeira fase descreve-se o existente, assim como as intervenções propostas. Posteriormente indicam-se os potenciais danos estruturais resultantes das alterações pretendidas e as principais medidas a considerar para os evitar. Numa fase posterior propõe-se a sequenciação dos trabalhos de modo a evitar um colapso parcial ou global e, por último, apresentam-se conclusões e sugerem-se desenvolvimentos futuros. / The present work seeks to present an analysis related to the structural safety of buildings that are object of excavations at a lower level than their foundations. Considering the existence of three different moments – a first period before the beginning of the works, a second one correspondent to the rehabilitation procedures and a last one related with the future utilization of the patrimony, this article will focus on the second period, because during that gap of time, the structure is usually weakened, which implies a lower structural safety that tends to be ignored, due to its temporary nature. In the first phase, the existing construction is described, as well as the proposed interventions. Afterwards, are referred the potential structural damages resultant of the architectonical proposals and the measures to implemented to prevent them. In the posterior phase we propose the work sequence, in order to avoid a partial or global collapse and, finally, we reach some conclusions and suggest other works to be developed in the future.

Effect of organic complexation on the toxicity of Cu to the earthworm Eisenia fetida

The relationship between Cu speciation in solution and mortality and tissue Cu concentrations in Eisenia fetida was investigated. E. fetida were exposed to solutions containing 0.009, 0.049 and 0.125 mg Cu L-1 and 0, 0.15, 0.35 and 50 mg EDTA L-1. Mortalities of 100, 60, 50 and 25% were recorded in the 0.125 mg Cu L-1 solutions containing 0, 0.15, 0.35 and 50 mg EDTA L-1, respectively. Similarly tissue body burden decreased with increasing EDTA concentration. Complexation capacity of the solution increased with EDTA concentration. In the 0.125 mg Cu L-1 solution labile Cu concentration decreased with increasing EDTA concentration. These trends are attributed to complexation of free Cu ions with EDTA molecules, and the non-bioavailable nature of the resultant Cu-EDTA complex. (C) 2007 Elsevier Ltd. All rights reserved.

Why are some handaxes symmetrical? Testing the influence of handaxe morphology on butchery effectiveness

The morphology of Acheulean handaxes continues to be a subject of debate amongst Lower Palaeolithic archaeologists, with some arguing that many handaxes are over-engineered for a subsistence function alone. This study aims to provide an empirical foundation for these debates by testing the relationship between a range of morphological variables, including symmetry, and the effectiveness of handaxes for butchery. Sixty handaxes were used to butcher 30 fallow deer by both a professional and a non-professional butcher. Regression analysis on the resultant data set indicates that while frontal symmetry may explain a small amount of variance in the effectiveness of handaxes for butchery, a large percentage of variance remains unexplained by symmetry or any of the other morphological variables under consideration.

Observational evidence of a coronal mass ejection distortion directly attributable to a structured solar wind

We present the first observational evidence of the near-Sun distortion of the leading edge of a coronal mass ejection (CME) by the ambient solar wind into a concave structure. On 2007 November 14, a CME was observed by coronagraphs onboard the STEREO-B spacecraft, possessing a circular cross section. Subsequently the CME passed through the field of view of the STEREO-B Heliospheric Imagers where the leading edge was observed to distort into an increasingly concave structure. The CME observations are compared to an analytical flux rope model constrained by a magnetohydrodynamic solar wind solution. The resultant bimodal speed profile is used to kinematically distort a circular structure that replicates the initial shape of the CME. The CME morphology is found to change rapidly over a relatively short distance. This indicates an approximate radial distance in the heliosphere where the solar wind forces begin to dominate over the magnetic forces of the CME influencing the shape of the CME.

From the sun to the Earth: The 13 May 2005 coronal mass ejection

We report the results of a multi-instrument, multi-technique, coordinated study of the solar eruptive event of 13 May 2005. We discuss the resultant Earth-directed (halo) coronal mass ejection (CME), and the effects on the terrestrial space environment and upper Earth atmosphere. The interplanetary CME (ICME) impacted the Earth’s magnetosphere and caused the most-intense geomagnetic storm of 2005 with a Disturbed Storm Time (Dst) index reaching −263 nT at its peak. The terrestrial environment responded to the storm on a global scale. We have combined observations and measurements from coronal and interplanetary remote-sensing instruments, interplanetary and near-Earth in-situ measurements, remote-sensing observations and in-situ measurements of the terrestrial magnetosphere and ionosphere, along with coronal and heliospheric modelling. These analyses are used to trace the origin, development, propagation, terrestrial impact, and subsequent consequences of this event to obtain the most comprehensive view of a geo-effective solar eruption to date. This particular event is also part of a NASA-sponsored Living With a Star (LWS) study and an on-going US NSF-sponsored Solar, Heliospheric, and INterplanetary Environment (SHINE) community investigation.

Sensitivity of 21st century stratospheric ozone to greenhouse gas scenarios

To understand how greenhouse gas (GHG) emissions may affect future stratospheric ozone, 21st century projections from four chemistry-climate models are examined for their dependence on six different GHG scenarios. Compared to higher GHG emissions, lower emissions result in smaller increases in tropical upwelling with resultant smaller reductions in ozone in the tropical lower stratosphere and less severe stratospheric cooling with resultant smaller increases in upper stratospheric ozone globally. Increases in reactive nitrogen and hydrogen that lead to additional chemical ozone destruction mainly play a role in scenarios with higher GHG emissions. Differences among the six GHG scenarios are found to be largest over northern midlatitudes (∼20 DU by 2100) and in the Arctic (∼40 DU by 2100) with divergence mainly in the second half of the 21st century. The uncertainty in the return of stratospheric column ozone to 1980 values arising from different GHG scenarios is comparable to or less than the uncertainty that arises from model differences in the larger set of 17 CCMVal-2 SRES A1B simulations. The results suggest that effects of GHG emissions on future stratospheric ozone should be considered in climate change mitigation policy and ozone projections should be assessed under more than a single GHG scenario.

The potential to narrow uncertainty in projections of stratospheric ozone over the 21st century

Future stratospheric ozone concentrations will be determined both by changes in the concentration of ozone depleting substances (ODSs) and by changes in stratospheric and tropospheric climate, including those caused by changes in anthropogenic greenhouse gases (GHGs). Since future economic development pathways and resultant emissions of GHGs are uncertain, anthropogenic climate change could be a significant source of uncertainty for future projections of stratospheric ozone. In this pilot study, using an "ensemble of opportunity" of chemistry-climate model (CCM) simulations, the contribution of scenario uncertainty from different plausible emissions pathways for ODSs and GHGs to future ozone projections is quantified relative to the contribution from model uncertainty and internal variability of the chemistry-climate system. For both the global, annual mean ozone concentration and for ozone in specific geographical regions, differences between CCMs are the dominant source of uncertainty for the first two-thirds of the 21st century, up-to and after the time when ozone concentrations return to 1980 values. In the last third of the 21st century, dependent upon the set of greenhouse gas scenarios used, scenario uncertainty can be the dominant contributor. This result suggests that investment in chemistry-climate modelling is likely to continue to refine projections of stratospheric ozone and estimates of the return of stratospheric ozone concentrations to pre-1980 levels.

Later Pleistocene evolution of the Exe valley: a chronostratigraphic model of terrace formation and its implications for Palaeolithic archaeology

This paper presents the first systematic chronostratigraphic study of the river terraces of the Exe catchment in South West England and a new conceptual model for terrace formation in unglaciated basins with applicability to terrace staircase sequences elsewhere. The Exe catchment lay beyond the maximum extent of Pleistocene ice sheets and the drainage pattern evolved from the Tertiary to the Middle Pleistocene, by which time the major valley systems were in place and downcutting began to create a staircase of strath terraces. The higher terraces (8-6) typically exhibit altitudinal overlap or appear to be draped over the landscape, whilst the middle terraces show greater altitudinal separation and the lowest terraces are of a cut and fill form. The terrace deposits investigated in this study were deposited in cold phases of the glacial-interglacial Milankovitch climatic cycles with the lowest four being deposited in the Devensian Marine Isotope Stages (MIS) 4-2. A new cascade process-response model is proposed of basin terrace evolution in the Exe valley, which emphasises the role of lateral erosion in the creation of strath terraces and the reworking of inherited resistant lithological components down through the staircase. The resultant emergent valley topography and the reworking of artefacts along with gravel clasts, have important implications for the dating of hominin presence and the local landscapes they inhabited. Whilst the terrace chronology suggested here is still not as detailed as that for the Thames or the Solent System it does indicate a Middle Palaeolithic hominin presence in the region, probably prior to the late Wolstonian Complex or MIS 6. This supports existing data from cave sites in South West England.

Evaluating canalside hedgerows to determine future interventions

This paper describes a project undertaken during 2001/2002 which developed a method for valuing hedgerows adjacent to the inland waterway network of Great Britain. The method enables the landowner, British Waterways, to manage their valuable environmental asset to achieve a good level of biodiversity and robust habitat balanced against the heavy amenity use the 3000 km canal network endures. Valuation techniques were developed using a combination of new and existing ecological indices for components of biodiversity, hedgerow structure and amenity, and synthesised into an index in an innovative combined approach. The resultant index was then applied to a sample 20 km section of hedge alongside the Grand Union Canal in Southeast England. The results obtained reflect the hedgerows' present value, and highlight factors that might improve or limit their future increase in value. The results from the case study application also demonstrate that there is a positive relationship between hedgerow structure and biodiversity, and that hedgerows in urban areas are less biodiverse and structurally sound than those in rural areas. Furthermore, there is a zone within rural areas influenced by the adjacent urban areas and/or higher amenity use. The paper concludes with an assessment of the approaches' strengths and weaknesses with a view to its compatibility with other hedgerow evaluations, such as HEGS, its use by other agencies or landowners, and to aid hedgerow management and future development. (C) 2004 Elsevier Ltd. All rights reserved.

Near infrared reflectance spectroscopy (NIRS) to predict biological parameters of maize silage: effects of particle comminution, oven drying temperature and the presence of residual moisture

Maize silage nutritive quality is routinely determined by near infrared reflectance spectroscopy (NIRS). However, little is known about the impact of sample preparation on the accuracy of the calibration to predict biological traits. A sample population of 48 maize silages representing a wide range of physiological maturities was used in a study to determine the impact of different sample preparation procedures (i.e., drying regimes; the presence or absence of residual moisture; the degree of particle comminution) on resultant NIR prediction statistics. All silages were scanned using a total of 12 combinations of sample pre-treatments. Each sample preparation combination was subjected to three multivariate regression techniques to give a total of 36 predictions per biological trait. Increased sample preparations procedure, relative to scanning the unprocessed whole plant (WP) material, always resulted in a numerical minimisation of model statistics. However, the ability of each of the treatments to significantly minimise the model statistics differed. Particle comminution was the most important factor, oven-drying regime was intermediate, and residual moisture presence was the least important. Models to predict various biological parameters of maize silage will be improved if material is subjected to a high degree of particle comminution (i.e., having been passed through a 1 mm screen) and developed on plant material previously dried at 60 degrees C. The extra effort in terms of time and cost required to remove sample residual moisture cannot be justified. (c) 2005 Elsevier B.V. All rights reserved.