Effects of dentin dry/moist condition on the immediate adhesive performance of different solvent-based etch-and-rinse adhesivesystems

Purpose: The purpose of this research was to analyze and measure, under optical microscopy, the hybrid layer thickness and resin tags length, as well as the microtensile bond strength of two conventional adhesive systems when applied to dry and moist dentinal substrate. Methods: Thirty-two extracted human molars were randomly distributed into four groups according to the adhesive systems (XP Bond and Prime&Bond 2.1) and moisture condition (dry and moist). In Groups I and II, XP adhesive system was applied on dry and moist dentin, respectively; while Groups III and IV received PB adhesive system, in the same way as was done in Groups I and II, respectively. After adhesive and restorative procedures, all specimens were sectioned along their long axes; one hemi-tooth sample was subjected to the microtensile bond strength test while the other was decalcified and serially sectioned into six micron thick slices and sequentially mounted on glass slides. These sections were stained by the Brown and Brenn method for posterior analysis and measurement of the hybrid layer and resin tags under a light microscope with a micrometric ocular 40/075. Results: Data were analyzed using two-way ANOVA and Tukey's test (α=0.05). For the variable hybrid layer thickness, XP showed no significant differences between dry and moist dentin (5.2 μm and 5.5 μm, respectively), but for PB, hybrid layer was significantly thicker for moist (4.0 μm) than for dry dentin (3.0 μm). For the variable resin tags length XP showed 17.9 μm length for dry dentin and 20.8 μm for moist dentin; PB 11.7 μm for dry and 12.69 μm for moist dentin;there was no significant differences between them, independent of the moisture condition. For the variable microtensile bond strength, XP showed 38.0 MPa for dry dentin and 44.5 MPa for moist dentin; and PB showed 22.7 MPa for dry dentin and 20.8 MPa for dry dentin no significant difference was observed between moist and dry dentin for XP (p=0.2) and PB (p=0.7), but XP was presented significantly higher bond strength values than PB in both moisture conditions (p=0.003 for dry and p=0.002 for moist). Conclusion: The two-step butanol-based etch-and-rinse adhesive XP Bond presented a superior behavior with regard to the hybrid layer thickness, length of resin tags and bond strength to dry and moist dentin substrates when compared with two-step acetone-based adhesive system Prime&Bond2.1. © 2013 Elsevier Ltd.

Environmental management and operational performance in automotive companies in Brazil: The role of human resource management and lean manufacturing

The main objective of this study is to verify the influence of Environmental Management (EM) on Operational Performance (OP) in Brazilian automotive companies, analyzing whether Lean Manufacturing (LM) and Human Resources (HR) interfere in the greening of these companies. Therefore, a conceptual framework listing these concepts was proposed, and three research hypotheses were presented. A questionnaire was elaborated based on this theoretical background and sent to respondents occupying the highest positions in the production/operations areas of Brazilian automotive companies. The data, collected from 75 companies, were analyzed using structural equation modeling. The main results are as follows: (a) the model tested revealed an adequate goodness of fit, showing that overall, the relations proposed between EM and OP and between HR, LM and EM tend to be statistically valid; (b) EM tends to influence OP in a positive and statistically weak manner; (c) LM has a greater influence on EM when compared to the influence HR has over EM; (d) HR has a positive relationship over EM, but the statistical significance of this relationship is less than that of the other evaluated relationships. The originality of this paper lies in its gathering the concepts of EM, LM, HR and OP in a single study, as they generally tend not to be treated jointly. This paper also provided valid empirical evidence for a littlestudied context: the Brazilian automotive sector. © 2012 Elsevier Ltd. All rights reserved.

Performance, survivability and carcass traits of crossbred lambs from five paternal breeds with local hair breed Santa Inês ewes

The present study aimed to evaluate the performance, survivability and carcass traits of crossbred lambs. Data from 299 lambs born to 209 ewes were used. The dams were from a local hair breed (Santa Inês) and five breeds of sires were used: Dorper (DR), Ile de France (IF), Hampshire Down (HD), Texel (TX) and Santa Inês (SI). The lambs were weighed at birth, weaning and slaughter. Fasting body weight, skin thickness, hot and cold carcass weight, carcass yield and carcass length were measured at slaughter. Carcasses were separated into commercial cuts: neck, shoulder, rib, belly, loin and leg. Leg length and circumference were measured. Analyses of variances using MIXED procedure in SAS® were carried out for weights and carcass traits. Factor, discriminant and canonical analysis were carried out. Mortality data of animals from birth until slaughter was analyzed using logistic regression. The HD animals had the highest mortality rate. TX lambs had similar growth rate and survivability compared to DR and IF and had better carcass traits than these genetic groups. Therefore, this breed can be used as paternal breed to crossbreeding with Santa Inês dams. Santa Inês animals did not differ in growth from birth until slaughter compared to crossbred animals, which highlights the potential of this naturalized breed for meat production. Moreover, there is a great variability inside this breed for carcass and growth traits which may undergo great improvement through selection programs. © 2013 Elsevier B.V.

Performance of laying hens and economic viability of different climatization systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of the bone marrow cell transplantation on elevated plus-maze performance in hippocampal-injured mice

Several reports have shown that the hippocampus plays an important role in different aspects of the emotional control. There is evidence that lesions in this structure cause behavioral disinhibition, with reduction of reactions expressing fear and anxiety. Thus, to portray the aptitude of cell therapy to abrogate injuries of hippocampal tissue, we examined the behavioral effects of bone marrow mononuclear cells (BMMCs) transplantation on C57BL/6 mice that had the hippocampus damaged by electrolytic lesion. For this purpose, mice received, seven days after bilateral electrolytic lesion in the dorsal hippocampus, culture medium or BMMCs expressing the enhanced green fluorescent protein (EGFP) transgene. One week after transplantation, animals were tested in the elevated plus-maze (EPM). On the whole, three assessment sessions in the EPM were carried out, with seven days separating each trial. Thirty-five days after the induction of injury, mice were sacrificed and their brains removed for immunohistochemistry. The behavioral evaluation showed that the hippocampal lesion caused disinhibition, an effect which was slightly lessened, from the second EPM test, in transplanted subjects. On the other hand, immunohistochemical data revealed an insignificant presence of EGFP+ cells inside the brains of injured mice. In view of such scenario, we hypothesized that the subtle rehabilitation of the altered behavior might be a result from a paracrine effect from the transplanted cells. This might have been caused by the release of bioactive factors capable of boosting endogenous recuperative mechanisms for a partial regaining of the hippocampal functions. © 2013 Elsevier B.V.

A model for analysing data portal performance: The biodiversity case

Currently, many museums, botanic gardens and herbariums keep data of biological collections and using computational tools researchers digitalize and provide access to their data using data portals. The replication of databases in portals can be accomplished through the use of protocols and data schema. However, the implementation of this solution demands a large amount of time, concerning both the transfer of fragments of data and processing data within the portal. With the growth of data digitalization in institutions, this scenario tends to be increasingly exacerbated, making it hard to maintain the records updated on the portals. As an original contribution, this research proposes analysing the data replication process to evaluate the performance of portals. The Inter-American Biodiversity Information Network (IABIN) biodiversity data portal of pollinators was used as a study case, which supports both situations: conventional data replication of records of specimen occurrences and interactions between them. With the results of this research, it is possible to simulate a situation before its implementation, thus predicting the performance of replication operations. Additionally, these results may contribute to future improvements to this process, in order to decrease the time required to make the data available in portals. © Rinton Press.

Experimental research on the influence of the air humidity conditions in an air conditioning system

The factors that have influence on the energy consumption of a small air conditioning system that are worth mentioning are the efficiencies of the compressor, evaporator and condenser, the form that the refrigerant flow is controlled, the fan model used, and climatic conditions. Within the climate issue, an interesting factor is that the relative humidity when it comes to the effect that it causes, especially in the performance of the air condenser, which generally is not considered in the projects. This study aims to evaluate the influence of humidity on the coefficient of system performance (COP), seeking to quantify their influence when it happens. The tests were performed on a testing bench, mounted at the Laboratory for Energy Efficiency (LAMOTRIZ) UNESP-Campus Guaratinguetá. In the study, the wet bulb temperature was ranged, keeping the rotation of the scroll compressor with application of a frequency inverter in its best performance. The test bench is provided with a supervisory system of data collection that is also able to control all functions of the bench. In the results, there was a significant influence, particularly when comparing high humidity conditions with low humidity, noting that only over 65% relative humidity is that significant changes are observed in the COP of the system. © 2013 Elsevier Inc.

Performance de Trichogramma pretiosum Riley, 1879 e T. exiguum Pinto & Platner, 1978 (Hymenoptera: trichogrammatidae) em ovos de populações de Plutella xylostella (LINNAEUS, 1758) (Lepidoptera: Plutellidae) sob ação de Bacillus thuringiensis Berliner, 1915 (Bacillales: Bacillaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Processos de tomada de decisões na performance musical: influência das heurísticas e vieses na elaboração da performance

Pós-graduação em Música - IA

Com que corpo eu vou?: a beleza e a performance na construção do corpo midiático

Pós-graduação em Ciências da Motricidade - IBRC

Nas melodias da toada: riso e performance no cururu paulista

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Exercício físico no diabete transgeracional de ratas: efeito na performance reprodutiva e nos hormônios sexuais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fazendo retratos e experimentos: a performance da linguagem em Lygia Bojunga

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Age-related differences in postural control: effects of the complexity of visual manipulation and sensorimotor contribution to postural performance

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)