Optimized back-focal-plane interferometry directly measures forces of optically trapped particles

Back-focal-plane interferometry is used to measure displacements of optically trapped samples with very high spatial and temporal resolution. However, the technique is closely related to a method that measures the rate of change in light momentum. It has long been known that displacements of the interference pattern at the back focal plane may be used to track the optical force directly, provided that a considerable fraction of the light is effectively monitored. Nonetheless, the practical application of this idea has been limited to counter-propagating, low-aperture beams where the accurate momentum measurements are possible. Here, we experimentally show that the connection can be extended to single-beam optical traps. In particular, we show that, in a gradient trap, the calibration product κ·β (where κ is the trap stiffness and 1/β is the position sensitivity) corresponds to the factor that converts detector signals into momentum changes; this factor is uniquely determined by three construction features of the detection instrument and does not depend, therefore, on the specific conditions of the experiment. Then, we find that force measurements obtained from back-focal-plane displacements are in practice not restricted to a linear relationship with position and hence they can be extended outside that regime. Finally, and more importantly, we show that these properties are still recognizable even when the system is not fully optimized for light collection. These results should enable a more general use of back-focal-plane interferometry whenever the ultimate goal is the measurement of the forces exerted by an optical trap.

Geology of the Cerro-Quema Au-Cu deposit (Azuero Peninsula, Panama)

The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a CretaceousPaleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late CretaceousOligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.

Aggregate stability in soils cultivated with eucalyptus

The objective of this work was to evaluate the aggregate stability of tropical soils under eucalyptus plantation and native vegetation, and assess the relationships between aggregate stability and some soil chemical and physical properties. Argisols, Cambisol, Latosols and Plinthosol within three eucalyptus-cultivated regions, in the states of Espírito Santo, Rio Grande do Sul and Minas Gerais, Brazil, were studied. For each region, soils under native vegetation were compared to those under minimum tillage with eucalyptus cultivation. The aggregate stability was measured using the high-energy moisture characteristic (HEMC) technique, i.e., the moisture release curve at very low suctions. This method compares the resistance of aggregates to slaking on a relative scale from zero to one. Thus, the aggregate stability from different soils and management practices can be directly compared. The aggregate stability ratio was greater than 50% for all soils, which shows that the aggregate stability index is high, both in eucalyptus and native vegetation areas. This suggests that soil management adopted for eucalyptus cultivation does not substantially modify this property. In these soils, the aggregate stability ratio does not show a good relationship with clay or soil organic matter contents. However, soil organic matter shows a positive relationship with clay content and cation exchange capacity.

Accreditation of forensic pathology service: a priviledge or a nightmare?

Forensic experts play a major role in the legal process as they offer professional expert opinion and evidence within the criminal justice system adjudicating on the innocence or alleged guilt of an accused person. In this respect medico-legal examination is an essential part of the investigation process, determining in a scientific way, the cause(s) and manner of unexpected and/or unnatural death or bringing clinical evidence in case of physical, psychological or sexual abuse in living people. From a legal perspective, these types of investigation must meet international standards i-e it should be independent, effective and prompt. Ideally the investigations should be conducted by board certified experts in forensic medicine, endowed with a solid experience in this field, without any hierarchical relationship with the prosecuting authorities and having access to appropriate facilities in order to provide forensic reports of high quality. In this respect, there is a need for any private or public national or international authority including non-governmental organisations seeking experts qualified in forensic medicine,to have at disposal a list of specialists working in accordance with high standards of professional performance within forensic pathology services that have been successfully submitted to an official accreditation/certification process using valid and acceptable criteria. To reach this goal the National Association of Medical examiners (NAME) has elaborated an accreditation/certification check-list which should be served as decision-making support to assist inspectors appointed to evaluate applicants. In the same spirit than NAME Accreditation Standards, ECLM board decided to set up an ad hoc working group with the mission to elaborate an accreditation/certification procedure similar to the NAME's one but taking into account the realities of forensic medicine practices in Europe and restricted to post-mortem investigations. This accreditation process applies to services and not to individual practitioners by emphasizing policies and procedures rather than professional performance. In addition the standards to be complied with should be considered as the minimum standards needed to get the recognition of performing and reliable forensic pathology service.

Statistical reference criteria for adaptive signal processing in digital communications

A general criterion for the design of adaptive systemsin digital communications called the statistical reference criterionis proposed. The criterion is based on imposition of the probabilitydensity function of the signal of interest at the outputof the adaptive system, with its application to the scenario ofhighly powerful interferers being the main focus of this paper.The knowledge of the pdf of the wanted signal is used as adiscriminator between signals so that interferers with differingdistributions are rejected by the algorithm. Its performance isstudied over a range of scenarios. Equations for gradient-basedcoefficient updates are derived, and the relationship with otherexisting algorithms like the minimum variance and the Wienercriterion are examined.

Carbon isotope fractionation for cotton genotype selection

The objective of this work was to evaluate the carbon isotope fractionation as a phenomic facility for cotton selection in contrasting environments and to assess its relationship with yield components. The experiments were carried out in a randomized block design, with four replicates, in the municipalities of Santa Helena de Goiás (SHGO) and Montividiu (MONT), in the state of Goiás, Brazil. The analysis of carbon isotope discrimination (Δ) was performed in 15 breeding lines and three cultivars. Subsequently, the root growth kinetic and root system architecture from the selected genotypes were determined. In both locations, Δ analyses were suitable to discriminate cotton genotypes. There was a positive correlation between Δ and seed-cotton yield in SHGO, where water deficit was more severe. In this site, the negative correlations found between Δ and fiber percentage indicate an integrative effect of gas exchange on Δ and its association with yield components. As for root robustness and growth kinetic, the GO 05 809 genotype performance contributes to sustain the highest values of Δ found in MONT, where edaphoclimatic conditions were more suitable for cotton. The use of Δ analysis as a phenomic facility can help to select cotton genotypes, in order to obtain plants with higher efficiency for gas exchange and water use.

Prevalence of overweight in the Seychelles: 15 year trends and association with socio-economic status.

We assessed the 15-year trends in the distribution of body mass index (BMI) and the prevalence of overweight in the Seychelles (Indian Ocean, African Region) and the relationship with socio-economic status (SES). Three population-based examination surveys were conducted in 1989, 1994 and 2004. Occupation was categorized as 'labourer', 'intermediate' or 'professional'. Education was also assessed in 1994 and 2004. Between 1989 and 2004, mean BMI increased markedly in all sex and age categories (overall: 0.16 kg m(-2) per calendar year, which corresponds to 0.46 kg per calendar year). The prevalence of overweight (including obesity, BMI >or= 25 kg m(-2)) increased from 29% to 52% in men and from 50% to 67% in women. The prevalence of obesity (BMI >or= 30 kg m(-2)) increased from 4% to 15% in men and from 23% to 34% in women. Overweight was associated inversely with occupation in women and directly in men in all surveys. In multivariate analysis, overweight was associated similarly (direction and magnitude) to occupation and education. In conclusion, the increasing prevalence of overweight and obesity over time in all age, sex and SES categories suggests large-scale changes in societal obesogenic factors. The sex-specific association of SES with overweight suggests that prevention measures should be tailored accordingly.

Materiaalitarpeen suunnitteluprosessin kehittäminen ja varastonohjauksen parantaminen Elektroniikkalaitoksessa

Työ on tehty Puolustusvoimien Elektroniikkalaitoksella Riihimäellä. Elektroniikkalaitos toimii yhtenä vastuuvarikkona ja vastaa omalta osaltaan elektroniikka-alan järjestelmien kunnossapidosta. Työn tarkoituksena on selvittää materiaalitarpeen suunnitteluprosessi, kehittää varastonohjausta ja tutustua SAP-toiminnallisuuksien hyödyntämiseen. Materiaalitarpeen suunnittelemisella ja varastonohjauksen parantamisella pyritään kustannussäästöihin ja kunnossapitoprosessin kokonaisvaltaiseen tehostamiseen. Työssä käsitellään Elektroniikkalaitoksen materiaaliprosessia ja sen suhdetta kunnossapitoprosessiin sekä selvitetään materiaalitarpeen muodostumista ja kysynnän ennustamistarpeita. Samalla esitetään myös varastonohjauksen parantamiskohteita. Materiaalitarpeen suunnitteluprosessista on luotu toimintamalli, jota on testattu pilottiprojektin avulla. Työssätarkastellaan SAP-toiminnallisuuksien hyödyntämistä sekä materiaalitarpeen suunnittelussa, että varastonohjauksessa. Lisäksi esitellään kustannusarviolomake, joka on luotu osaksi materiaalitarpeen suunnitteluprosessia helpottamaan materiaalitäydennysten kustannusarviointia.

The business model ontology a proposition in a design science approach

The goal of this dissertation is to find and provide the basis for a managerial tool that allows a firm to easily express its business logic. The methodological basis for this work is design science, where the researcher builds an artifact to solve a specific problem. In this case the aim is to provide an ontology that makes it possible to explicit a firm's business model. In other words, the proposed artifact helps a firm to formally describe its value proposition, its customers, the relationship with them, the necessary intra- and inter-firm infrastructure and its profit model. Such an ontology is relevant because until now there is no model that expresses a company's global business logic from a pure business point of view. Previous models essentially take an organizational or process perspective or cover only parts of a firm's business logic. The four main pillars of the ontology, which are inspired by management science and enterprise- and processmodeling, are product, customer interface, infrastructure and finance. The ontology is validated by case studies, a panel of experts and managers. The dissertation also provides a software prototype to capture a company's business model in an information system. The last part of the thesis consists of a demonstration of the value of the ontology in business strategy and Information Systems (IS) alignment. Structure of this thesis: The dissertation is structured in nine parts: Chapter 1 presents the motivations of this research, the research methodology with which the goals shall be achieved and why this dissertation present a contribution to research. Chapter 2 investigates the origins, the term and the concept of business models. It defines what is meant by business models in this dissertation and how they are situated in the context of the firm. In addition this chapter outlines the possible uses of the business model concept. Chapter 3 gives an overview of the research done in the field of business models and enterprise ontologies. Chapter 4 introduces the major contribution of this dissertation: the business model ontology. In this part of the thesis the elements, attributes and relationships of the ontology are explained and described in detail. Chapter 5 presents a case study of the Montreux Jazz Festival which's business model was captured by applying the structure and concepts of the ontology. In fact, it gives an impression of how a business model description based on the ontology looks like. Chapter 6 shows an instantiation of the ontology into a prototype tool: the Business Model Modelling Language BM2L. This is an XML-based description language that allows to capture and describe the business model of a firm and has a large potential for further applications. Chapter 7 is about the evaluation of the business model ontology. The evaluation builds on literature review, a set of interviews with practitioners and case studies. Chapter 8 gives an outlook on possible future research and applications of the business model ontology. The main areas of interest are alignment of business and information technology IT/information systems IS and business model comparison. Finally, chapter 9 presents some conclusions.

Studies on integrating kinematic design method with mechanical systems simulation techniques

Theultimate goal of any research in the mechanism/kinematic/design area may be called predictive design, ie the optimisation of mechanism proportions in the design stage without requiring extensive life and wear testing. This is an ambitious goal and can be realised through development and refinement of numerical (computational) technology in order to facilitate the design analysis and optimisation of complex mechanisms, mechanical components and systems. As a part of the systematic design methodology this thesis concentrates on kinematic synthesis (kinematic design and analysis) methods in the mechanism synthesis process. The main task of kinematic design is to find all possible solutions in the form of structural parameters to accomplish the desired requirements of motion. Main formulations of kinematic design can be broadly divided to exact synthesis and approximate synthesis formulations. The exact synthesis formulation is based in solving n linear or nonlinear equations in n variables and the solutions for the problem areget by adopting closed form classical or modern algebraic solution methods or using numerical solution methods based on the polynomial continuation or homotopy. The approximate synthesis formulations is based on minimising the approximation error by direct optimisation The main drawbacks of exact synthesis formulationare: (ia) limitations of number of design specifications and (iia) failure in handling design constraints- especially inequality constraints. The main drawbacks of approximate synthesis formulations are: (ib) it is difficult to choose a proper initial linkage and (iib) it is hard to find more than one solution. Recentformulations in solving the approximate synthesis problem adopts polynomial continuation providing several solutions, but it can not handle inequality const-raints. Based on the practical design needs the mixed exact-approximate position synthesis with two exact and an unlimited number of approximate positions has also been developed. The solutions space is presented as a ground pivot map but thepole between the exact positions cannot be selected as a ground pivot. In this thesis the exact synthesis problem of planar mechanism is solved by generating all possible solutions for the optimisation process ¿ including solutions in positive dimensional solution sets - within inequality constraints of structural parameters. Through the literature research it is first shown that the algebraic and numerical solution methods ¿ used in the research area of computational kinematics ¿ are capable of solving non-parametric algebraic systems of n equations inn variables and cannot handle the singularities associated with positive-dimensional solution sets. In this thesis the problem of positive-dimensional solutionsets is solved adopting the main principles from mathematical research area of algebraic geometry in solving parametric ( in the mathematical sense that all parameter values are considered ¿ including the degenerate cases ¿ for which the system is solvable ) algebraic systems of n equations and at least n+1 variables.Adopting the developed solution method in solving the dyadic equations in direct polynomial form in two- to three-precision-points it has been algebraically proved and numerically demonstrated that the map of the ground pivots is ambiguousand that the singularities associated with positive-dimensional solution sets can be solved. The positive-dimensional solution sets associated with the poles might contain physically meaningful solutions in the form of optimal defectfree mechanisms. Traditionally the mechanism optimisation of hydraulically driven boommechanisms is done at early state of the design process. This will result in optimal component design rather than optimal system level design. Modern mechanismoptimisation at system level demands integration of kinematic design methods with mechanical system simulation techniques. In this thesis a new kinematic design method for hydraulically driven boom mechanism is developed and integrated in mechanical system simulation techniques. The developed kinematic design method is based on the combinations of two-precision-point formulation and on optimisation ( with mathematical programming techniques or adopting optimisation methods based on probability and statistics ) of substructures using calculated criteria from the system level response of multidegree-of-freedom mechanisms. Eg. by adopting the mixed exact-approximate position synthesis in direct optimisation (using mathematical programming techniques) with two exact positions and an unlimitednumber of approximate positions the drawbacks of (ia)-(iib) has been cancelled.The design principles of the developed method are based on the design-tree -approach of the mechanical systems and the design method ¿ in principle ¿ is capable of capturing the interrelationship between kinematic and dynamic synthesis simultaneously when the developed kinematic design method is integrated with the mechanical system simulation techniques.

La figura del mediador intercultural en Cataluña: la visión del colectivo formador

La aproximación al tipo de mediación intercultural que se está llevando a cabo en Cataluña en este momento en el ámbito educativo -y su desarrollo futuro- se concreta y se dibuja en la diversidad de respuestas y de enfoques que aparecen del mismo término. Hemos intentado poner en común la reflexión y el debate sobre cuál sería la figura ideal y real del mediador intercultural. Con esta finalidad se han realizado 17 entrevistas a todos los coordinadores y formadores en ejercicio.

Semantic data integration in a newspaper content management system

A newspaper content management system has to deal with a very heterogeneous information space as the experience in the Diari Segre newspaper has shown us. The greatest problem is to harmonise the different ways the involved users (journalist, archivists...) structure the newspaper information space, i.e. news, topics, headlines, etc. Our approach is based on ontology and differentiated universes of discourse (UoD). Users interact with the system and, from this interaction, integration rules are derived. These rules are based on Description Logic ontological relations for subsumption and equivalence. They relate the different UoD and produce a shared conceptualisation of the newspaper information domain.

Conocimiento del catalán y castellano por parte del alumnado inmigrante

A lo largo de la última década en Cataluña, la heterogeneidad identitaria, lingüística, cultural y étnica ha crecido de manera importante. En consecuencia, nuestras escuelas se han transformado en centros donde la pluralidad étnica, religiosa, cultural y lingüística es cada día más evidente. Pero, a diferencia de otros territorios del Estado, una de las características fundamentales de nuestro Sistema Educativo es su organización bajo los parámetros de la educación bilingüe. De esta manera, además de un profundo dominio del catalán, lengua propia de Cataluña y lengua usada como vehicular y de aprendizaje en la enseñanza, se persigue un buen conocimiento de la lengua castellana. En este contexto, diferentes estudios ponen en evidencia el papel clave del dominio de la lengua de la escuela tanto de cara a garantizar el éxito escolar como para la integración y la cohesión social. Con este marco de fondo, nos situamos en el caso del Instituto de Educación Secundaria (IES) de Guissona, en la comarca de la Segarra, donde por circunstancias diversas el fenómeno migratorio ha sido muy importante a lo largo de la última década. El objetivo de nuestra investigación es el análisis de las competencias lingüísticas del alumnado de dicho centro, tomando como referencia el nivel de competencia lingüística de sus iguales autóctonos.En concreto, a partir de una muestra de 28 niños y niñas inmigrantes que fueron comparados con un grupo de 93 escolares autóctonos de su misma edad y nivel escolar, nuestro trabajo analiza el desarrollo de diferentes habilidades en lengua catalana y castellana.

Expectativas educativas y sociales de las familias inmigrantes

Analizada la importancia de las actitudes de los padres -expectativas, niveles de aspiración,etc. - en el rendimiento escolar de los hijos, se presenta un estudio realizado entre familias procedentes de Africa residentes en Lérida. En éste se pondrán de manifiesto diferentes actitudes en función del proyecto familiar -producto de la trayectoria inmigrante- destacándose las observadas en el nivel de estudios deseado para los hijos, el nivel que realmente creen podrán alcanzar, la utilidad otorgada al sistema educativo y la movilización en la carrera discente.

Las experiencias escolares de la inmigración

Las experiencias escolares son múltiples y diversas, y su análisis nos puede ayudar a comprender las actitudes de los inmigrantes respecto a la escolarización de sus hijos y las expectativas de futuro que el sistema educativo representa para las nuevas generaciones. Las oportunidades educativas, las dinámicas de los centros escolares (positivas o negativas), el enfoque pedagógico, los roles docentes, etc. , presentes y pasados, van conformando la manera que tiene una comunidad de entender la educación y la importancia que le otorgan tanto los alumnos como sus familias. El estudio que presentamos, basado en una metodología cualitativa (mediante la realización de entrevistas en profundidad), es una primera aproximación a las experiencias escolares vividas en España por parte de las familias inmigradas y sus hijos y, también, a las experiencias profesionales de los docentes en relación con las citadas familias y alumnado.