Gender equity in the professoriate : a cohort study of new women professors in Australia

According to statistics and trend data, women continue to be substantially under- represented in the Australian professoriate, and growth in their representation has been slow despite the plethora of equity programs. While not disputing these facts, we propose that examining gender equity by cohort provides a complementary perspective on the status of gender equity in the professoriate. Based on over 500 survey responses, we detected substantial similarities between women and men who were appointed as professors or associate professors between 2005 and 2008. There were similar proportions of women and men appointed via external or internal processes or by invitation. Additionally, similar proportions of women and men professors expressed a marked preference for research over teaching. Furthermore, there were similar distributions between the genders in the age of appointment to the professoriate. However, a notable gender difference was that women were appointed to the professoriate on average 1.9 years later than mens. This later appointment provides one reason for the lower representation of women compared to men in the professoriate. It also raises questions of the typical length of time that women and men remain in the (paid) professoriate and reasons why they might leave it. A further similarity between women and men in this cohort was their identification of motivation and circumstances as key factors in their career orientation. However, substantially more women identified motivation than circumstances and the situation was reversed for men. The open-ended survey responses also provided confirmation that affirmative action initiatives make a difference to women’s careers.

Surrogacy and IVF

While in the past surrogacy was illegal in Queensland, since June 2010 the Surrogacy Act 2010 (Qld) (“the Act”) has made altruistic surrogacy arrangements lawful in Queensland. In addition, it provides a mechanism for transfer of legal parentage from the surrogate to the person(s) wishing to have a child (the intended parent(s)). Commercial surrogacy – where a payment, reward or other material benefit of advantage (other than the reimbursement of the “birth mother’s surrogacy costs” (s11 of the Act) is made for entering into a surrogacy arrangement – remains unlawful. The paramount guiding principle underpinning the Act is that of the wellbeing and best interests of a child born as a result of surrogacy. The Surrogacy Act 2010 (Qld) allows a single person or a couple (heterosexual or same sex couples) to enter into an agreement with a woman, and her partner (if she has one), to become pregnant with the intention that the child will be relinquished to the intended parent(s). The Act also provides a mechanism for the intended parent(s) to be legally recognised as the parent(s) of the child. In order for the intended parent(s) to be legally recognised (via a parentage order, discussed below) it must be shown that the surrogacy arrangement was entered into when all the parties were over 25 years of age and the intended parent(s) are male or, in a heterosexual or lesbian couple the female(s) are not likely to conceive or give birth to a healthy child due to medical reasons. The arrangement must be entered into before the surrogate becomes pregnant and all parties must have obtained independent legal advice and counselling about the proposed arrangement, and evidence of this is required at the time a parentage order is applied for. For the purposes of the Act it does not matter how the surrogate conceives the child or if the child is genetically related to the parties. During the period of the pregnancy, the surrogate has the right to manage her pregnancy in the way she wishes. Although she cannot profit from acting as a surrogate, section 11 states that she is entitled to surrogacy costs. These include, for example, reasonable medical costs related to pregnancy and the birth of the child; counselling and legal costs associated with the surrogacy arrangement; actual lost earnings because of leave taken during pregnancy or following birth and any reasonable travel expenses incurred. The surrogacy arrangement itself is not legally enforceable; however, obligations to pay a surrogate’s surrogacy costs are enforceable unless she chooses not to relinquish the child to the intending parents. While the Act does not specifically deal with the situation where the surrogate decides she is unprepared to relinquish the child to the intended parents, there have been examples where parties have entered into these kinds of arrangements, and the arrangements have become difficult. For example, the Family Court case of Re Evelyn (1998) FLC 92–807 involved a child born to a surrogate mother who decided not to surrender her. The child was the genetic child of the surrogate mother and the husband of the couple who had contracted with the surrogate mother. Both sets of parents brought proceedings in the court, seeking that the child live with them. In hearing the application, the court applied the paramount principle of the ‘best interests of the child’. The court made clear that there is no presumption in favour of the birth mother, although in this case the court found that the child may be better placed with the surrogate mother’s family.

Interactive peer-based learning in a comparative case study : what do students gain?

As English increasingly becomes one of the most commonly spoken languages in the world today for a variety of economic, social and cultural reasons, education is impacted by globalisation, the internationalisation of universities and the diversity of learners in classrooms. The challenge for educators is to find more effective ways of teaching English language so that students are better able to create meaning and communicate in the target language as well as to transform knowledge and understanding into relevant skills for a rapidly changing world. This research focuses broadly on English language education underpinned by social constructivist principles informing communicative language teaching and in particular, interactive peer learning approaches. An intervention of interactive peer-based learning in two case study contexts of English as Foreign Language (EFL) undergraduates in a Turkish university and English as Second Language (ESL) undergraduates in an Australian university investigates what students gain from the intervention. Methodology utilising qualitative data gathered from student reflective logs, focus group interviews and researcher field notes emphasises student voice. The cross case comparative study indicates that interactive peer-based learning enhances a range of learning outcomes for both cohorts including engagement, communicative competence, diagnostic feedback as well as assisting development of inclusive social relationships, civic skills, confidence and self efficacy. The learning outcomes facilitate better adaptation to a new learning environment and culture. An iterative instructional matrix tool is a useful product of the research for first year university experiences, teacher training, raising awareness of diversity, building learning communities, and differentiating the curriculum. The study demonstrates that English language learners can experience positive impact through peer-based learning and thus holds an influential key for Australian universities and higher education.

Arterial travel time estimation : revisiting the classical procedure

Travel time is an important network performance measure and it quantifies congestion in a manner easily understood by all transport users. In urban networks, travel time estimation is challenging due to number of reasons such as, fluctuations in traffic flow due to traffic signals, significant flow to/from mid link sinks/sources, etc. The classical analytical procedure utilizes cumulative plots at upstream and downstream locations for estimating travel time between the two locations. In this paper, we discuss about the issues and challenges with classical analytical procedure such as its vulnerability to non conservation of flow between the two locations. The complexity with respect to exit movement specific travel time is discussed. Recently, we have developed a methodology utilising classical procedure to estimate average travel time and its statistic on urban links (Bhaskar, Chung et al. 2010). Where, detector, signal and probe vehicle data is fused. In this paper we extend the methodology for route travel time estimation and test its performance using simulation. The originality is defining cumulative plots for each exit turning movement utilising historical database which is self updated after each estimation. The performance is also compared with a method solely based on probe (Probe-only). The performance of the proposed methodology has been found insensitive to different route flow, with average accuracy of more than 94% given a probe per estimation interval which is more than 5% increment in accuracy with respect to Probe-only method.

Using Fiber Bragg Grating (FBG) sensors for vertical displacement measurement of bridges

In many bridges, vertical displacements are one of the most relevant parameters for structural health monitoring in both the short and long terms. Bridge managers around the globe are always looking for a simple way to measure vertical displacements of bridges. However, it is difficult to carry out such measurements. On the other hand, in recent years, with the advancement of fiber-optic technologies, fiber Bragg grating (FBG) sensors are more commonly used in structural health monitoring due to their outstanding advantages including multiplexing capability, immunity of electromagnetic interference as well as high resolution and accuracy. For these reasons, using FBG sensors is proposed to develop a simple, inexpensive and practical method to measure vertical displacements of bridges. A curvature approach for vertical displacement measurement using curvature measurements is proposed. In addition, with the successful development of a FBG tilt sensors, an inclination approach is also proposed using inclination measurements. A series of simulation tests of a full-scale bridge was conducted. It shows that both the approaches can be implemented to determine vertical displacements for bridges with various support conditions, varying stiffness (EI) along the spans and without any prior known loading. These approaches can thus measure vertical displacements for most of slab-on-girder and box-girder bridges. Moreover, with the advantages of FBG sensors, they can be implemented to monitor bridge behavior remotely and in real time. Further recommendations of these approaches for developments will also be discussed at the end of the paper.

Hormones down under: Hormone therapy use after the Women's Health Initiative

Aims:  The primary objective was to describe the usage pattern of hormone therapy (HT) in a sample of urban Australian women in 2001 and to assess the characteristics of users vs. non-users. The second objective was to determine whether there had been any change in usage since the publication of the results of the combined oestrogen plus progestagen arm of the Women's Health Initiative (WHI) in 2002. Methods:  A cohort of 374 postmenopausal women aged 50–80 years participated in this substudy of the LAW (Longitudinal Assessment of Ageing in Women) project: a 5-year multidisciplinary, observational study. Participants completed an annual medical assessment including details of the use of HT and the reasons for use, as well as demographic and psychosocial data. Results:  In December 2001, 30.8% of the participants were using HT, whereas 55.4% were ever users. The management of vasomotor symptoms and mood disturbance were the primary reasons for use. Of those who had been using HT in December 2001 (24.4%) women ceased using HT in the 3 months following publication of the WHI results. The percentage of women using HT in December 2003 (13.9%) was less than half of that of December 2001. Conclusion:  The rate of HT use and the reasons for use, in 2001 in Brisbane was similar to that of other Australian regions. Usage of HT decreased since the publication of the WHI results in 2002 which may reflect changing attitudes by patients and practitioners regarding HT.

Intensive Case Management: A Critical Re-Appraisal of the Scientific Evidence for Effectiveness

Intensive Case Management (ICM) is widely claimed to be an evidence-based and cost effective program for people with high levels of disability as a result of mental illness. However, the findings of recent randomized controlled trials comparing ICM with ‘usual services’ suggest that both clinical and cost effectiveness of ICM may be weakening. Possible reasons for this, including fidelity of implementation, researcher allegiance effects and changes in the wider service environment within which ICM is provided, are considered. The implications for service delivery and research are discussed.

Judge George W Paul's Japanese house : a case study

In the late 1880s a pre-fabricated Japanese house was shipped from Kobe, Japan, to Brisbane, Australia, and erected in the up-market suburb of New Farm by Japanese tradesmen. This paper is developed from a broader project researching the life of G W Paul, the man who had the house built and subsequently lived in it for the remainder of his life. Paul’s motivation in importing the house represented a unique, but unfulfilled effort to develop a future, hybrid culture for Queensland. This effort took the form of a commercial venture to construct Japanese houses as desirable and climatically suitable dwellings. Against the backdrop of this ambition, this paper presents new research to elucidate and extend previous knowledge, assesses the reception of the house by its nineteenth century Brisbane audience, and considers possible reasons for the limited response which signalled the cancellation of the commercial venture.

The flammability of metallic materials in normal and reduced gravity

Metallic materials exposed to oxygen-enriched atmospheres – as commonly used in the medical, aerospace, aviation and numerous chemical processing industries – represent a significant fire hazard which must be addressed during design, maintenance and operation. Hence, accurate knowledge of metallic materials flammability is required. Reduced gravity (i.e. space-based) operations present additional unique concerns, where the absence of gravity must also be taken into account. The flammability of metallic materials has historically been quantified using three standardised test methods developed by NASA, ASTM and ISO. These tests typically involve the forceful (promoted) ignition of a test sample (typically a 3.2 mm diameter cylindrical rod) in pressurised oxygen. A test sample is defined as flammable when it undergoes burning that is independent of the ignition process utilised. In the standardised tests, this is indicated by the propagation of burning further than a defined amount, or „burn criterion.. The burn criterion in use at the onset of this project was arbitrarily selected, and did not accurately reflect the length a sample must burn in order to be burning independent of the ignition event and, in some cases, required complete consumption of the test sample for a metallic material to be considered flammable. It has been demonstrated that a) a metallic material.s propensity to support burning is altered by any increase in test sample temperature greater than ~250-300 oC and b) promoted ignition causes an increase in temperature of the test sample in the region closest to the igniter, a region referred to as the Heat Affected Zone (HAZ). If a test sample continues to burn past the HAZ (where the HAZ is defined as the region of the test sample above the igniter that undergoes an increase in temperature of greater than or equal to 250 oC by the end of the ignition event), it is burning independent of the igniter, and should be considered flammable. The extent of the HAZ, therefore, can be used to justify the selection of the burn criterion. A two dimensional mathematical model was developed in order to predict the extent of the HAZ created in a standard test sample by a typical igniter. The model was validated against previous theoretical and experimental work performed in collaboration with NASA, and then used to predict the extent of the HAZ for different metallic materials in several configurations. The extent of HAZ predicted varied significantly, ranging from ~2-27 mm depending on the test sample thermal properties and test conditions (i.e. pressure). The magnitude of the HAZ was found to increase with increasing thermal diffusivity, and decreasing pressure (due to slower ignition times). Based upon the findings of this work, a new burn criterion requiring 30 mm of the test sample to be consumed (from the top of the ignition promoter) was recommended and validated. This new burn criterion was subsequently included in the latest revision of the ASTM G124 and NASA 6001B international test standards that are used to evaluate metallic material flammability in oxygen. These revisions also have the added benefit of enabling the conduct of reduced gravity metallic material flammability testing in strict accordance with the ASTM G124 standard, allowing measurement and comparison of the relative flammability (i.e. Lowest Burn Pressure (LBP), Highest No-Burn Pressure (HNBP) and average Regression Rate of the Melting Interface(RRMI)) of metallic materials in normal and reduced gravity, as well as determination of the applicability of normal gravity test results to reduced gravity use environments. This is important, as currently most space-based applications will typically use normal gravity information in order to qualify systems and/or components for reduced gravity use. This is shown here to be non-conservative for metallic materials which are more flammable in reduced gravity. The flammability of two metallic materials, Inconel® 718 and 316 stainless steel (both commonly used to manufacture components for oxygen service in both terrestrial and space-based systems) was evaluated in normal and reduced gravity using the new ASTM G124-10 test standard. This allowed direct comparison of the flammability of the two metallic materials in normal gravity and reduced gravity respectively. The results of this work clearly show, for the first time, that metallic materials are more flammable in reduced gravity than in normal gravity when testing is conducted as described in the ASTM G124-10 test standard. This was shown to be the case in terms of both higher regression rates (i.e. faster consumption of the test sample – fuel), and burning at lower pressures in reduced gravity. Specifically, it was found that the LBP for 3.2 mm diameter Inconel® 718 and 316 stainless steel test samples decreased by 50% from 3.45 MPa (500 psia) in normal gravity to 1.72 MPa (250 psia) in reduced gravity for the Inconel® 718, and 25% from 3.45 MPa (500 psia) in normal gravity to 2.76 MPa (400 psia) in reduced gravity for the 316 stainless steel. The average RRMI increased by factors of 2.2 (27.2 mm/s in 2.24 MPa (325 psia) oxygen in reduced gravity compared to 12.8 mm/s in 4.48 MPa (650 psia) oxygen in normal gravity) for the Inconel® 718 and 1.6 (15.0 mm/s in 2.76 MPa (400 psia) oxygen in reduced gravity compared to 9.5 mm/s in 5.17 MPa (750 psia) oxygen in normal gravity) for the 316 stainless steel. Reasons for the increased flammability of metallic materials in reduced gravity compared to normal gravity are discussed, based upon the observations made during reduced gravity testing and previous work. Finally, the implications (for fire safety and engineering applications) of these results are presented and discussed, in particular, examining methods for mitigating the risk of a fire in reduced gravity.

YouTube

Originally launched in 2005 with a focus on user-generated content, YouTube has become the dominant platform for online video worldwide, and an important location for some of the most significant trends and controversies in the contemporary new-media environment. Throughout its very short history, it has also intersected with and been the focus of scholarly debates related to the politics, economics, and cultures of the new media—in particular, the “participatory turn” associated with “Web 2.0” business models’ partial reliance on amateur content and social networking. Given the slow pace of traditional scholarly publishing, the body of media and cultural studies literature substantively dedicated to describing and critically understanding YouTube’s texts, practices, and politics is still small, but it is growing steadily. At the same time, since its inception scholars from a wide range of disciplines and critical perspectives have found YouTube useful as a source of examples and case studies, some of which are included here; others have experimented directly with the scholarly and educational potential of the platform itself. For these reasons, although primarily based around the traditional publishing outlets for media, Internet, and cultural studies, this bibliography draws eclectically on a wide range of sources—including sources very closely associated with the web business literature and with the YouTube community itself.

Assessment of damages for property damage

In Gagner Pty t/as Indochine Café v Canturi Corporation Pty Ltd (2009) 262 ALR 691, the assessment of damages awarded for the rectification work to the premises of the respondent was in issue. The appellant operated a restaurant above the respondent’s jewellery store in Sydney. When the kitchen of the restaurant flooded, water escaped causing damage to the jewellery store’s fit-out. The escape of the water was held to be due to the negligence of persons for whom the appellant was vicariously liable. The trial judge awarded damages, measured by the amount required to return the premises as close as was possible to the condition prior to the flood damage as well as an allowance for interruption to the business for 10 days. The 10 day allowance reflected the number of days the store would have been closed for if it was to be returned to its previous condition. The evidence was that the flooding has only affected approximately 10% of the floor area of the store. However, instead of having work carried out to bring the premises back to its condition as before the water damage, the respondent closed the business for 29 working days for a complete internal refurbishment – at a cost substantially more than simple rectification. On appeal it was argued that the trial judge had assessed the damages incorrectly as by undertaking a complete refurbishment had the effect that the respondent did not suffer any loss as a consequence of the negligence in relation to the fit-out. It was asserted that the claim for damages was in the circumstances a claim for betterment. It was also argued that the damages should not include a component for GST. Campbell JA gave reasons, with Macfarlan JA and Sackville AJA agreeing.

Me and my body : the relevance of the difference for the distinction between withdrawing life support and euthanasia

In this paper I discuss David Shaw’s claim that the body of a terminally ill person can be conceived as a kind of life-support, akin to an artificial ventilator. I claim that this position rests upon an untenable dualism between the mind and the body. Given that dualism continues to be attractive to some thinkers, I attempt to diagnose the reasons why it continues to be attractive, as well as to demonstrate its incoherence, drawing on some recent work in the philosophy of psychology. I conclude that, if my criticisms are sound, Shaw’s attempt to deny the distinction between withdrawal and euthanasia fails.

Intention, foresight and ending life : a response to "The Double Effect effect" by Charles Foster, Jonathan Herring, Karen Melham and Tony Hope, (CQ 20(1))

In this paper I examine the recent arguments by Charles Foster, Jonathan Herring, Karen Melham and Tony Hope against the utility of the doctrine of double effect. One basis on which they reject the utility of the doctrine is their claim that it is notoriously difficult to apply what they identify as its 'core' component, namely, the distinction between intention and foresight. It is this contention that is the primarily focus of my article. I argue against this claim that the intention/foresight distinction remains a fundamental part of the law in those jurisdictions where intention remains an element of the offence of murder and that, accordingly, it is essential ro resolve the putative difficulties of applying the intention/foresight distinction so as to ensure the integrity of the law of murder. I argue that the main reasons advanced for the claim that the intention/foresight distinction is difficult to apply are ultimately unsustainable, and that the distinction is not as difficult to apply as the authors suggest.

Caveat today gone tomorrow : Applying to the Supreme Court to Remove a Caveat

While there are many reasons why a client may seek removal of a caveat (which retains an interest in land or water allocation), the procedures involved require careful adherence.

Using ‘think aloud’ as a strategy for learning clinical reasoning in high fidelity case-based simulation for undergraduate nursing students

AIMS This paper reports on the implementation of a research project that trials an educational strategy implemented over six months of an undergraduate third year nursing curriculum. This project aims to explore the effectiveness of ‘think aloud’ as a strategy for learning clinical reasoning for students in simulated clinical settings. BACKGROUND Nurses are required to apply and utilise critical thinking skills to enable clinical reasoning and problem solving in the clinical setting [1]. Nursing students are expected to develop and display clinical reasoning skills in practice, but may struggle articulating reasons behind decisions about patient care. For students learning to manage complex clinical situations, teaching approaches are required that make these instinctive cognitive processes explicit and clear [2-5]. In line with professional expectations, nursing students in third year at Queensland University of Technology (QUT) are expected to display clinical reasoning skills in practice. This can be a complex proposition for students in practice situations, particularly as the degree of uncertainty or decision complexity increases [6-7]. The ‘think aloud’ approach is an innovative learning/teaching method which can create an environment suitable for developing clinical reasoning skills in students [4, 8]. This project aims to use the ‘think aloud’ strategy within a simulation context to provide a safe learning environment in which third year students are assisted to uncover cognitive approaches that best assist them to make effective patient care decisions, and improve their confidence, clinical reasoning and active critical reflection on their practice. MEHODS In semester 2 2011 at QUT, third year nursing students will undertake high fidelity simulation, some for the first time commencing in September of 2011. There will be two cohorts for strategy implementation (group 1= use think aloud as a strategy within the simulation, group 2= not given a specific strategy outside of nursing assessment frameworks) in relation to problem solving patient needs. Students will be briefed about the scenario, given a nursing handover, placed into a simulation group and an observer group, and the facilitator/teacher will run the simulation from a control room, and not have contact (as a ‘teacher’) with students during the simulation. Then debriefing will occur as a whole group outside of the simulation room where the session can be reviewed on screen. The think aloud strategy will be described to students in their pre-simulation briefing and allow for clarification of this strategy at this time. All other aspects of the simulations remain the same, (resources, suggested nursing assessment frameworks, simulation session duration, size of simulation teams, preparatory materials). RESULTS Methodology of the project and the challenges of implementation will be the focus of this presentation. This will include ethical considerations in designing the project, recruitment of students and implementation of a voluntary research project within a busy educational curriculum which in third year targets 669 students over two campuses. CONCLUSIONS In an environment of increasingly constrained clinical placement opportunities, exploration of alternate strategies to improve critical thinking skills and develop clinical reasoning and problem solving for nursing students is imperative in preparing nurses to respond to changing patient needs. References 1. Lasater, K., High-fidelity simulation and the development of clinical judgement: students' experiences. Journal of Nursing Education, 2007. 46(6): p. 269-276. 2. Lapkin, S., et al., Effectiveness of patient simulation manikins in teaching clinical reasoning skills to undergraduate nursing students: a systematic review. Clinical Simulation in Nursing, 2010. 6(6): p. e207-22. 3. Kaddoura, M.P.C.M.S.N.R.N., New Graduate Nurses' Perceptions of the Effects of Clinical Simulation on Their Critical Thinking, Learning, and Confidence. The Journal of Continuing Education in Nursing, 2010. 41(11): p. 506. 4. Banning, M., The think aloud approach as an educational tool to develop and assess clinical reasoning in undergraduate students. Nurse Education Today, 2008. 28: p. 8-14. 5. Porter-O'Grady, T., Profound change:21st century nursing. Nursing Outlook, 2001. 49(4): p. 182-186. 6. Andersson, A.K., M. Omberg, and M. Svedlund, Triage in the emergency department-a qualitative study of the factors which nurses consider when making decisions. Nursing in Critical Care, 2006. 11(3): p. 136-145. 7. O'Neill, E.S., N.M. Dluhy, and C. Chin, Modelling novice clinical reasoning for a computerized decision support system. Journal of Advanced Nursing, 2005. 49(1): p. 68-77. 8. Lee, J.E. and N. Ryan-Wenger, The "Think Aloud" seminar for teaching clinical reasoning: a case study of a child with pharyngitis. J Pediatr Health Care, 1997. 11(3): p. 101-10.