Composite materials impact damage detection using neural networks

This thesis considers two basic aspects of impact damage in composite materials, namely damage severity discrimination and impact damage location by using Acoustic Emissions (AE) and Artificial Neural Networks (ANNs). The experimental work embodies a study of such factors as the application of AE as Non-destructive Damage Testing (NDT), and the evaluation of ANNs modelling. ANNs, however, played an important role in modelling implementation. In the first aspect of the study, different impact energies were used to produce different level of damage in two composite materials (T300/914 and T800/5245). The impacts were detected by their acoustic emissions (AE). The AE waveform signals were analysed and modelled using a Back Propagation (BP) neural network model. The Mean Square Error (MSE) from the output was then used as a damage indicator in the damage severity discrimination study. To evaluate the ANN model, a comparison was made of the correlation coefficients of different parameters, such as MSE, AE energy, AE counts, etc. MSE produced an outstanding result based on the best performance of correlation. In the second aspect, a new artificial neural network model was developed to provide impact damage location on a quasi-isotropic composite panel. It was successfully trained to locate impact sites by correlating the relationship between arriving time differences of AE signals at transducers located on the panel and the impact site coordinates. The performance of the ANN model, which was evaluated by calculating the distance deviation between model output and real location coordinates, supports the application of ANN as an impact damage location identifier. In the study, the accuracy of location prediction decreased when approaching the central area of the panel. Further investigation indicated that this is due to the small arrival time differences, which defect the performance of ANN prediction. This research suggested increasing the number of processing neurons in the ANNs as a practical solution.

Micromechanics of agglomerate damage processes

This thesis reports a detailed investigation of the micromechanics of agglomerate behaviour under free-fall impact, double (punch) impact and diametrical compression tests using the simulation software TRUBAL. The software is based on the discrete element method (DEM) which incorporates the Newtonian equations of motion and contact mechanics theory to model the interparticle interactions. Four agglomerates have been used: three dense (differing in interface energy and contact density) and one loose. Although the simulated agglomerates are relatively coarse-grained, the results obtained are in good agreement with laboratory test results reported in the literature. The computer simulation results show that, in all three types of test, the loose agglomerate cannot fracture as it is unable to store sufficient elastic energy. Instead, it becomes flattened for low loading-rates and shattered or crushed at higher loading-rates. In impact tests, the dense agglomerates experience only local damage at low impact velocities. Semi-brittle fracture and fragmentation are produced over a range of higher impact velocities and at very high impact velocities shattering occurs. The dense agglomerates fracture in two or three large fragments in the diametrical compression tests. Local damage at the agglomerate-platen interface always occurs prior to fracture and consists of local bond breakage (microcrack formation) and local dislocations (compaction). The fracture process is dynamic and much more complex than that suggested by continuum fracture mechanics theory. Cracks are always initiated from the contact zones and propagate towards the agglomerate centre. Fracture occurs a short time after the start of unloading when a fracture crack "selection" process takes place. The detailed investigation of the agglomerate damage processes includes an examination of the evolution of the fracture surface. Detailed comparisons of the behaviour of the same agglomerate in all three types of test are presented. The particle size distribution curves of the debris are also examined, for both free-fall and double impact tests.

Numerical modelling of agglomerate degradation

In the processing industries particulate materials are often in the form of powders which themselves are agglomerations of much smaller sized particles. During powder processing operations agglomerate degradation occurs primarily as a result of collisions between agglomerates and between agglomerates and the process equipment. Due to the small size of the agglomerates and the very short duration of the collisions it is currently not possible to obtain sufficiently detailed quantitative information from real experiments to provide a sound theoretically based strategy for designing particles to prevent or guarantee breakage. However, with the aid of computer simulated experiments, the micro-examination of these short duration dynamic events is made possible. This thesis presents the results of computer simulated experiments on a 2D monodisperse agglomerate in which the algorithms used to model the particle-particle interactions have been derived from contact mechanics theories and, necessarily, incorporate contact adhesion. A detailed description of the theoretical background is included in the thesis. The results of the agglomerate impact simulations show three types of behaviour depending on whether the initial impact velocity is high, moderate or low. It is demonstrated that high velocity impacts produce extensive plastic deformation which leads to subsequent shattering of the agglomerate. At moderate impact velocities semi-brittle fracture is observed and there is a threshold velocity below which the agglomerate bounces off the wall with little or no visible damage. The micromechanical processes controlling these different types of behaviour are discussed and illustrated by computer graphics. Further work is reported to demonstrate the effect of impact velocity and bond strength on the damage produced. Empirical relationships between impact velocity, bond strength and damage are presented and their relevance to attrition and comminution is discussed. The particle size distribution curves resulting from the agglomerate impacts are also provided. Computer simulated diametrical compression tests on the same agglomerate have also been carried out. Simulations were performed for different platen velocities and different bond strengths. The results show that high platen velocities produce extensive plastic deformation and crushing. Low platen velocities produce semi-brittle failure in which cracks propagate from the platens inwards towards the centre of the agglomerate. The results are compared with the results of the agglomerate impact tests in terms of work input, applied velocity and damage produced.

The development of an expert system for the identification anodic coating process defects as a contribution to the dissemination of anodizing technology

Initially this thesis examines the various mechanisms by which technology is acquired within anodizing plants. In so doing the history of the evolution of anodizing technology is recorded, with particular reference to the growth of major markets and to the contribution of the marketing efforts of the aluminium industry. The business economics of various types of anodizing plants are analyzed. Consideration is also given to the impact of developments in anodizing technology on production economics and market growth. The economic costs associated with work rejected for process defects are considered. Recent changes in the industry have created conditions whereby information technology has a potentially important role to play in retaining existing knowledge. One such contribution is exemplified by the expert system which has been developed for the identification of anodizing process defects. Instead of using a "rule-based" expert system, a commercial neural networks program has been adapted for the task. The advantages of neural networks over 'rule-based' systems is that they are better suited to production problems, since the actual conditions prevailing when the defect was produced are often not known with certainty. In using the expert system, the user first identifies the process stage at which the defect probably occurred and is then directed to a file enabling the actual defects to be identified. After making this identification, the user can consult a database which gives a more detailed description of the defect, advises on remedial action and provides a bibliography of papers relating to the defect. The database uses a proprietary hypertext program, which also provides rapid cross-referencing to similar types of defect. Additionally, a graphics file can be accessed which (where appropriate) will display a graphic of the defect on screen. A total of 117 defects are included, together with 221 literature references, supplemented by 48 cross-reference hyperlinks. The main text of the thesis contains 179 literature references. (DX186565)

Sustainable agricultural production:an investigation in Brazilian semi-arid livestock farms

This paper investigates the environmental sustainability and competitiveness perceptions of small farmers in a region in northern Brazil. The main data collection instruments included a survey questionnaire and an analysis of the region's strategic plan. In total, ninety-nine goat and sheep breeding farmers were surveyed. Data analysis methods included descriptive statistics, cluster analysis, and chi-squared tests. The main results relate to the impact of education, land size, and location on the farmers' perceptions of competitiveness and environmental issues. Farmers with longer periods of education have higher perception scores about business competitiveness and environmental sustainability than those with less formal education. Farmers who are working larger land areas also have higher scores than those with smaller farms. Lastly, location can yield factors that impact on farmers' perceptions. In our study, farmers located in Angicos and Lajes had higher perception scores than Pedro Avelino and Afonso Bezerra, despite the geographical proximity of these municipalities. On the other hand, three other profile variables did not impact on farmers' perceptions, namely: family income, dairy production volume, and associative condition. The authors believe the results and insights can be extended to livestock farming in other developing countries and contribute generally to fostering effective sustainable development policies, mainly in the agribusiness sector. © 2013 Elsevier Ltd. All rights reserved.

What are tests for? The implications of stuttering steps along the patient pathway

This article explores the implications of how US family physicians make decisions about ordering diagnostic tests for their patients. Data is based on a study of 256 physicians interviewed after viewing a video vignette of a presenting patient. The qualitative analysis of 778 statements relating to trustworthiness of evidence for their decision making, the use of any kind of technology and diagnostic testing suggests a range of internal and external constraints on physician decision making. Test-ordering for family physicians in the United States is significantly influenced by both hidden cognitive processes related to the physician's calculation of patient resources and a health insurance system that requires certain types of evidence in order to permit further tests or particular interventions. The consequence of the need for physicians to meet multiple forms of proof that may not always relate to relevant treatment delays a diagnosis and treatment plan agreed not only by the physician and patient but also the insurance company. This results in a patient journey that is made up of stuttering steps to a confirmed diagnosis and treatment undermining patient-centred practice, compromising patient care, constraining physician autonomy and creating additional expense. © 2014 Elsevier Ltd.

Cleavage initiation in the intercritically reheated coarse-grained heat-affected zone:Part I. Fractographic evidence

Tensile, crack opening displacement (COD), blunt notch, and Charpy impact tests were used to investigate cleavage initiation in the intercritically reheated coarse-grained heat-affected zone (IC CG HAZ) of three steels. The steels were chosen to provide different distributions and morphologies of MA (high-carbon martensite with some retained austenite) particles within the IC CG HAZ structure. Observation of minimum impact toughness values for the IC CG HAZ was found to be associated with a particular microstructure containing a near-connected grain boundary network of blocky MA particles, the MA particles being significantly harder than the internal grain microstructure. The initiation mechanism for this structure was determined to be from a combination of an overlap of residual transformational induced stress fields, due to the formation of the MA particles, between two closely spaced particles and stress concentration effects resulting from debonding of the particles. © 1994 The Minerals, Metals and Materials Society, and ASM International.

Putting policy initiatives into practice:adopting an “honest broker” approach to adapting small businesses against flooding

Purpose: Amidst the current economic climate, which places many constraints on expensive flood defence schemes, the policy makers tend to favour schemes that are sympathetic to the needs of small and medium-sized enterprises (SMEs) and which promote empowering local communities based on their individual local contexts. Research has shown that although several initiatives are in place to create behavioural change among SMEs in undertaking adaptation approaches against flooding, they often tend to delay their responses by means of a "wait and see" attitude. The paper aims to discuss these issues. Design/methodology/approach: This paper argues that unless there are conscious efforts in the policy-making community to undertake explicit measures to engage with SMEs in a collaborative way, the uptake of adaptation measures will not be achieved as intended. With the use of the "honest broker" approach the paper provides a conceptual way forward of how a sense of collaboration can be instigated in an engagement process between the policy makers and SMEs, so that the scientific knowledge is translated in an appropriately rational way, which best meets the expectations of the SMEs. Findings: The paper proposes a conceptual model for engaging SMEs that will potentially increase the uptake of flood adaptation measures by SMEs. This could be a useful model with which to kick start a collaborative engagement process that could escalate to wider participation in other areas to improve impact of policy initiatives. Originality/value: The paper lays the conceptual foundation for a new theoretical base in the area, which will encourage more empirical investigations that will potentially enhance the practicality of some of the existing policies. © Emerald Group Publishing Limited.

Aspects of 350 ºC (500 ºF) embrittlement in a CrMoV steel

A study has been made of the fracture modes associated with toughness minima, observed in notched impact tests at 173K, for a weldable CrMoV steel, quenched from different austenitising temperatures, and tempered in the range 300-900K. The fracture mode at 623K varied from 100% transgranular cleavage for an austenitising temperature of 1523K. The results are discussed in terms of mechanisms for 350 ºC embrittlement, such mechanisms require modification to allow for the difficulty of dissolving alloy carbides at low austenitising temperatures.

Pathway to clozapine use:a comparison between a patient cohort from New Zealand and a cohort from the United Kingdom

Background and Objective: Clozapine has been available since the early 1990s. Studies continue to demonstrate its superior efficacy in treatment-resistant schizophrenia. Despite this, numerous studies show under-utilisation, delayed access and reluctance by psychiatrists to prescribe clozapine. This retrospective cross-sectional study compared the prescribing of clozapine in two adult cohorts under the care of large public mental health services in Auckland (New Zealand) and Birmingham (United Kingdom) on 31 March 2007. Method: Time from first presentation to clozapine initiation, prior antipsychotics trialled and antipsychotic co-prescribing were compared. Data included demographics, psychiatric diagnosis, co-morbid conditions, year of first presentation, admissions and pharmacological treatment (clozapine dose, start date, prior antipsychotics, co-prescribed antipsychotic). Results: Overall, 664 people were prescribed clozapine (402 Auckland; 262 Birmingham); mean daily dose of 384 mg (Auckland) and 429 mg (Birmingham). 53 % presented after 1990 and the average duration of time before starting clozapine was significantly longer in the Birmingham cohort (6.5 vs. 5.3 years) but this reduced in both cohorts to a 1-year mean in those presenting within the last 3 years. The average number of antipsychotics trialled pre-clozapine for those presenting since 1990 was significantly higher in the Birmingham cohort (4.3 vs. 3.1) but in both cohorts this similarly reduced in those presenting within the last 3 years. Antipsychotic co-prescribing was significantly higher in the Birmingham cohort (22.9 vs. 10.7 %). Conclusions: There is evidence that access to clozapine has improved over time in both cohorts, with a reduction in the duration between presentation and initiation of clozapine and number of different antipsychotics trialled pre-clozapine. These are very positive findings in terms of optimising outcomes with clozapine and are possibly due to the impact of guideline recommendations, increasing clinician, consumer and carer knowledge, and experience with clozapine and funding changes. © 2014 Springer International Publishing.

An exploration of pharmacy-specific reasons for non-adherence to prescribed medicines in a socioeconomically deprived, ethnically diverse UK cohort

Methods - Ethical approval for the study was granted by both the local National Health Service (NHS) Research Ethics Committee (REC) and Aston University’s REC. Seven focus groups were conducted between October and December 2011 in medical or community settings within inner-city Birmingham (UK). Discussions were guided by a theme plan which was developed from key themes identified by a literature review and piloted via a Patient Consultation Group. Each focus group had between 3 and 7 participants. The groups were digitally recorded and subsequently transcribed verbatim. The transcriptions were then subjected to thematic analysis via constant comparison in order to identify emerging themes. Results - Participants recognised the pharmacist as an expert source of advice about prescribed medicines, a source they frequently felt a need to consult as a result of the inadequate supply of medicines information from the prescriber. However, an emerging theme was a perception that pharmacists had an oblique profit motive relating to the supply of generic medicines with frequent changes to the ‘brand’ of generic supplied being attributed to profit-seeking by pharmacists. Such changes had a negative impact on the patient’s perceived efficacy of the therapy which may make non-adherence more likely. Conclusions - Whilst pharmacists were recognised as medicines experts, trust in the pharmacist was undermined by frequent changes to generic medicines. Such changes have the potential to adversely impact adherence levels. Further, quantitative research is recommended to examine if such views are generalisable to the wider population of Birmingham and to establish if such views impact on adherence levels.

A conceptual framework for understanding resilience of construction SMEs to extreme weather events

Purpose Small and Medium-sized Enterprises (SMEs), which form a significant portion in many economies, are some of the most vulnerable to the impact of Extreme Weather Events (EWEs). This is of particular importance to the construction industry, as an overarching majority of construction companies are SMEs who account for the majority of employment and income generation within the industry. In the UK, previous research has identified construction SMEs as some of the worst affected by EWEs. Design/methodology/approach Given the recent occurrences of EWEs and predictions suggesting increases in both the intensity and frequency of EWEs in the future, improving the resilience of construction SMEs is vital for achieving a resilient construction industry. A conceptual framework is first developed which is then populated and expanded based on empirical evidence. Positioned within a pragmatic research philosophy, case study research strategy was adopted as the overall research strategy in undertaking this investigation. Findings Based on the findings of two in-depth case studies of construction SMEs, a framework was developed to represent EWE resilience of construction SMEs, where resilience was seen as a collective effect of vulnerability, coping strategies and coping capacities of SMEs, characteristics of the EWE and the wider economic climate. Originality/value The paper provides an original contribution towards the overarching agenda of the resilience of SMEs, and policy making in the area of EWE risk management by presenting a novel conceptual framework depicting the resilience of medium-sized construction companies.

A study of stock market fluctuations and their relation to business conditions

Most research on stock prices is based on the present value model or the more general consumption-based model. When applied to real economic data, both of them are found unable to account for both the stock price level and its volatility. Three essays here attempt to both build a more realistic model, and to check whether there is still room for bubbles in explaining fluctuations in stock prices. In the second chapter, several innovations are simultaneously incorporated into the traditional present value model in order to produce more accurate model-based fundamental prices. These innovations comprise replacing with broad dividends the more narrow traditional dividends that are more commonly used, a nonlinear artificial neural network (ANN) forecasting procedure for these broad dividends instead of the more common linear forecasting models for narrow traditional dividends, and a stochastic discount rate in place of the constant discount rate. Empirical results show that the model described above predicts fundamental prices better, compared with alternative models using linear forecasting process, narrow dividends, or a constant discount factor. Nonetheless, actual prices are still largely detached from fundamental prices. The bubblelike deviations are found to coincide with business cycles. The third chapter examines possible cointegration of stock prices with fundamentals and non-fundamentals. The output gap is introduced to form the nonfundamental part of stock prices. I use a trivariate Vector Autoregression (TVAR) model and a single equation model to run cointegration tests between these three variables. Neither of the cointegration tests shows strong evidence of explosive behavior in the DJIA and S&P 500 data. Then, I applied a sup augmented Dickey-Fuller test to check for the existence of periodically collapsing bubbles in stock prices. Such bubbles are found in S&P data during the late 1990s. Employing econometric tests from the third chapter, I continue in the fourth chapter to examine whether bubbles exist in stock prices of conventional economic sectors on the New York Stock Exchange. The ‘old economy’ as a whole is not found to have bubbles. But, periodically collapsing bubbles are found in Material and Telecommunication Services sectors, and the Real Estate industry group.

Adapting Mpowerment to a Rural Area

As HIV/AIDS continues to disproportionately impact men who have sex with men (MSM) (CDC, 2010a), effective and timely prevention strategies for this population must be developed. Specifically, evidence-based interventions that can be easily adapted and have proven effectiveness are needed. Hence, the purpose of the current study was to assess the impact of the Mpowerment Project (Hayes, Rebchook, & Kegeles, 2003), a community level HIV prevention program originally designed for young urban gay men, when adapted for rural gay men. The Mpowerment Project is recognized as evidence- based intervention by the CDC (CDC, 2009b). The current study is an extension of this research, assessing Mpowerment model fidelity and the behavioral and attitudinal changes that occurred among participants. Data were collected from participants in a rural area of southeast Idaho from 2002-2004. Data were collected prior to M-Group participation and at a three months follow-up. The 66 individuals completing the M-Group pre and posttest assessment also attended a minimum of three study events and a maximum of 226 events. Results revealed no significant changes in attitudinal variables and all but one behavioral variable among Rural Mpowerment (R-MP) participants. The one significant behavior change was an increase in reported safer sex discussion among friends, indicating a possible change in the social norm regarding safer sex. Results also indicate that program fidelity was maintained and the Mpowerment Project is adaptable to rural areas. However, there was no indication of attitudinal changes in participants of this study. There were no changes in behavioral variables aside from discussion about safer sex with friends increasing. The lack of evidence-based interventions for rural gay men highlights the need for further research on the community impact of the Mpowerment Project on rural participants.

The relationship between staff perceptions of principal leadership and school performance

The climate of a school can be defined as the set of internal characteristics that distinguishes one school from another and influences the behavior of its members (Hoy & Hannum, 1997). Schools with a positive climate have been shown to positively impact students (Hoy, 1972). A principal’s leadership style influences the climate that, in turn, impacts student performance. ^ In this work, the researcher investigated Miami-Dade County Public Schools in order to determine if there was a relationship between instructional staff members’ perceptions of their school’s principals, a derivative of the district’s school climate studies, and their schools’ grades. ^ Eight School Climate Survey items were inter-correlated. The smallest intercorrelation was .83, which is still a large intercorrelation, and the largest intercorrelation was .96. Pearson’s correlation analysis (Healey, 2004) was run to determine the relationship between schools’ earned points and averaged survey responses. Survey items 8, 9, 12 and 13 had weak (less than .30) positive correlations to schools’ earned points. Survey items 7, 10, 11 and 14 had moderate (above .30) positive correlations to schools’ earned points. ^ The researcher created a composite variable (Pallant, 2007) from all the School Climate Survey responses. This composite variable, titled Principal Leadership Score, allowed the researcher to determine that approximately 9% of the variance in the points earned by schools in 2009 can be accounted for by how teachers in this study perceived the leadership of their principals. ^ This study’s findings of a moderate positive correlation between teachers’ perceptions of principal leadership and school performance supports earlier research linking school climate and school performance. Due to the fact that the leadership of the principal affects, either positively or negatively, the learning and working environment of students and teachers, it is recommended that principals use the eight School Climate Survey items examined within this study as guides (Pepper & Thomas, 2002). Through focusing on these survey items, principals may be propelled to self-identify their leadership strengths as well as leadership weaknesses.^