Preparation and characterization of glass-ceramic materials in the BaO-Li2O-ZrO2-SiO2 system and their dependence on treatment temperatures

The preparation and characterization of transparent glass-ceramics in the composition of 30Li2O:5ZrO2:xBaO:(100-x) SiO2 with x = 0, 5, 10, 15, and 20 mol% are described. Glasses were melted in a platinum crucible at 1100°C for 2 h and then heat-treated at 900°C for 3 h. The characterizations were performed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman and infrared spectroscopy, and scanning electron microscopy (SEM). The experimental results indicate that there was a structural change in the glass-ceramics as the BaO concentration in the mixture increased. In the XRD patterns of samples without heat treatment, only the halo was observed. After heat treatment, the appearance of the materials was verified by X-ray diffraction peaks. The reorganization of the amorphous solid was confirmed by Raman and IR spectroscopy along with XPS and SEM, with a more homogeneous phase formation being observed.

Pressure-induced phase transitions in Zr-rich PbZr1-xTixO3 ceramics

A Raman study of structural changes in the Zr-rich PbZr1-x TixO3 (PZT) system under hydrostatic pressures up to 5.0 GPa is presented. We observe that externally applied pressure induces several phase transitions in PZT ceramics among phases with orthorhombic (Ao), rhombohedral low-temperature (RLT), and rhombohedral high-temperature (RHT) symmetries (all found in PZT at ambient pressure and room temperature). Each of the compositions investigated (0.02 ≤ x ≤ 0.14) exhibits a high-pressure phase with orthorhombic (OI′) symmetry. We further report a detailed study of the pressure dependence of Raman frequencies to elucidate the phase transitions and to provide a set of pressure coefficients for the high-pressure phases.

Foamy macrophages in the liver of cattle fed Brachiaria brizantha hay

Liver and lymph nodes injuries characterized by clusters of foamy macrophages, some of them containing birefringent crystals, were observed in cattle fed on Brachiaria brizantha hay. The cattle were from an experimental group poisoned with Senecio brasiliensis known to cause hepatic fibrosis and hepatocyte megalocytosis. One of the animals developed photosensitivity but the exact cause wasn't determined since both plants were fed. The foamy macrophages were present from the 30th d of feeding. Early appearance of these lesions may be particular to the animal specie used or due to the presence of both toxic plants.

PCR-based detection of Babesia bovis and Babesia bigemina in their natural host Boophilus microplus and cattle

PCR and nested-PCR methods were used to assess the frequency of Babesia bovis and Babesia bigemina infection in Boophilus microplus engorged females and eggs and in cattle reared in an area with endemic babesiosis. Blood and the engorged female ticks were from 27 naturally infested calves and 25 crossbred cows. The frequency of both Babesia species was similar in calves and cows (P > 0.05). Babesia bovis was detected in 23 (85.2%) calves and in 25 (100%) cows and B. bigemina was detected in 25 (92.6%) calves and in 21 (84%) cows. Mixed infections with the both Babesia species were identified in 42 animals, 21 in each age category. Of female ticks engorged on calves, 34.9% were negative and single species infection with B. bigemina (56.2%) was significantly more frequent (P < 0.01) than with B. bovis (4.7%). Most of the females (60.8%) engorged on cows did not show Babesia spp. infection and the frequency of single B. bovis infection (17.6%) was similar (P > 0.05) to the frequency of single B. bigemina infection (15.9%). Mixed Babesia infection was lower (P < 0.01) than single species infection in female ticks engorged either in cows (5.7%) or in calves (4.3%). An egg sample from each female was analysed for the presence of Babesia species. Of the egg samples from female ticks infected with B. bovis, 26 (47.3%) were infected while from those from female ticks infected with B. bigemina 141 (76.6%) were infected (P < 0.01). The results showed that although the frequency of both species of Babesia was similar in calves and cows, the infectivity of B. bigemina was higher to ticks fed on calves while to those ticks fed on cows the infectivity of both Babesia species was similar. © 2004 Australian Society for Parasitology Inc. Published by Elsevier Ltd. All rights reserved.

An ellipsometric study of manganese oxide films: In situ characterization of the deposition and electroreduction of MnO2

The electrodeposition of manganese oxide films onto a platinum substrate was investigated by means of in situ ellipsometry. In the thickness range from 0 to 150 nm, the anodic oxide behaves as an Isotropic single layer with optical constants that are independent of thickness. Deviations at higher thickness are explained in terms of anisotropic properties of the film. The electroreduction of thin films (up to ca. 150 nm) in an alkaline electrolyte leads to a decrease in both the refractive index and the extinction coefficient and is accompanied by a thickness increase of ca. 10%. The Mn(IV) to Mn(III) conversion takes place from the oxide/electrolyte interface inwards. © 2004 The Electrochemical Society. All rights reserved.

The investigation of α→β phase transition in poly(vinylidene fluoride) (PVDF)

The phase transition from the non-polar α-phase to the polar β-phase of poly(vinylidene fluoride) (PVDF) has been investigated using micro-Raman spectroscopy, which is advantageous for being a non-destructive technique. Films of α-PVDF were subjected to stretching under controlled rates and at 80°C, the transition to β-PVDF being monitored by the decrease in the Raman band at 794 cm-1 characteristic of the α-phase, with the concomitant increase in the 839 cm-1 band characteristic of the β-phase. Poling with negative corona discharge was found to affect the a-PVDF morphology improving the Raman bands related to this crystalline phase. This effect is minimized for films stretched to higher ratios. Significantly, corona-induced effects could not be observed with the other experimental techniques, viz. X-ray diffraction and infrared spectroscopy.

Sheep and cattle grazing alternately: Nematode parasitism and pasture decontamination

Three grazing management systems were compared to examine pasture decontamination of gastrointestinal nematode parasites (GIN) of sheep (Ovies aries) and cattle (Bos taurus). They consisted of sheep and cattle grazing paddocks alternately for 32, 96 or 192 days over 2 years. Pastureland (8.43 ha) was subdivided into six areas of eight paddocks each to produce an eight-paddock rotational grazing system. Every paddock was grazed for 4 days and then rested for 28 days. Sixty-six Ile de France ewes and 12 steers were randomly divided into three groups (22 sheep and four cattle per group). Each grazing system included a cattle area and a sheep area. Sheep and cattle interchanged areas every 32 days in system 1 (Group 1), every 96 days in system 2 (Group 2) and every 192 days in system 3 (Group 3). Fecal examination and larvae counting on pasture were performed every 32 days. During summer, winter and spring 2005, tracer lambs free of nematode infection were introduced into each sheep group and later sacrificed for quantification and identification of GIN species. All cattle were sacrificed for the same purpose. The main parasites found in tracer lambs were Haemonchus contortus and Trichostrongylus colubriformis, and in cattle, Haemonchus similis, Cooperia punctata and Oesophagostomum radiatum. Pasture contamination by sheep-infective GIN larvae was considerably reduced after 96 or 192 days of cattle grazing. Cross-infections between sheep and cattle GIN were not significant, which suggested that integrated grazing using such animals could be used for pasture decontamination. However, as effective anthelmintics were not available, decontamination was not sufficient for proper prophylaxis of GIN infections in Ile de France sheep, which are quite susceptible to such parasites. © 2007 Elsevier B.V. All rights reserved.

In vivo evaluation of porous titanium implants with biomimetic coating

The osseointegration of porous titanium implants was evaluated in the present work. Implants were fabricated from ASTM grade 2 titanium by a powder metallurgy method. Part of these implants were submitted to chemical and thermal treatment in order to deposit a biomimetic coating, aiming to evaluate its influence on the osseointegration of the implants. The implants were characterized by Scanning Electron Microscopy (SEM), Electron Dispersive X-Ray Spectroscopy (EDS) and Raman Spectroscopy. Three coated and three control (uncoated) implants were surgically inserted into thirty albino rabbits' left and right tibiae, respectively. Tibiae samples were submitted to histological and histomorphometric analyses, utilizing SEM, optical microscopy and mechanical tests. EDS results indicated calcium (Ca) and phosphorous (P) at the surface and Raman spectra exhibited an intense peak, characteristic of hydroxyapatite (HA). Bone neoformation was detected at the bone-implant interface and inside the pores, including the central ones. The mean bone neoformation percentage in the coated implants was statistically higher at 15 days, compared to 30 and 45 days. The mechanical tests showed that coated implants presented higher resistance to displacement, especially after 30 and 45 days.

Vibration and oil analysis for monitoring problems related to water contamination in rolling

Trying to reduce particle contamination in lubrication systems, industries of the whole world spend millions of dollars each year on the improvement of filtration technology. In this context, by controlling fluid cleanliness, some companies are able to reduce failures rates up to 85 percent. However, in some industries and environments, water is a contaminant more frequently encountered than solid particles, and it is often seen as the primary cause of component failure. Only one percent of water in oil is enough to reduce life expectancy of a journal bearing by 80 percent. For rolling bearing elements, the situation is worse because water destroys the oil film and, under the extreme temperatures and pressures generated in the load zone of a rolling bearing element, free and emulsified water can result in instantaneous flash-vaporization giving origin to erosive wear. This work studies the effect of water as lubricant contaminant in ball bearings, which simulates a situation that could actually occur in real systems. In a designed bench test, three basic lubricants of different viscosities were contaminated with different contents of water. The results regarding oil and vibration analysis are presented for different bearing speeds.

Morphological and molecular analysis of the collagen fibers in inflammatory process

Collagen makes up one third of the total protein in humans, being formed by the connection of three polypeptide chains arranged in a triple helix. This protein has fundamental importance in the formation of extracellular matrix of connective tissue. This study aimed to analyze the structural changes of collagen, which are resulting from inflammatory processes in oral mucosa, and to make the comparative analysis between the histopathology and the Raman spectra. The samples of tissues with inflammatory fibrous hyperplasia (IFH) and normal mucosa (NM) were evaluated by Raman Spectroscopy, hematoxylin-eosin and Massons trichrome stain. The histological analysis in both stains showed differences in collagen fibers, which was presented as thin fibers and arranged in parallel direction in NM and as collagen fibers are thick, mature and not organized, showing that these types of stain show morphological changes of collagen in IFH. The Raman Spectroscopy discriminate the groups of NM and IFH based on vibrational modes of proline, hydroxiproline and CH3, CH2. The histological stains only shows information from morphological data, and can be complemented by Raman spectra. This technique could demonstrate that inflammatory process caused some changes in collagen structure which is related to aminoacids such as proline and hidroxyproline. © 2011 SPIE-OSA.

Resistance against gastrointestinal nematodes in Crioulo Lageano and crossbred Angus cattle in southern Brazil

Gastrointestinal nematode (GIN) infection is a major cause of production losses in cattle. This study was carried out to evaluate the natural resistance against nematode infection in Crioulo Lageano and crossbred Angus male calves. Crioulo Lageano is a local cattle breed in the state of Santa Catarina, in southern Brazil. Ten weaned calves of each breed were grazed together on pasture and naturally infected with nematodes between July 2009 and December 2010. Once every 28 days, we collected fecal and blood samples for parasitological and immunological tests, as well as recording body weights. After 19 samplings, all animals were slaughtered for quantification and identification of GINs. We found that the animals had been infected with the following nematode species, in decreasing order by the mean number of specimens: Trichostrongylus axei, Cooperia punctata, Ostertagia ostertagi, Haemonchus placei, Oesophagostomum radiatum, and Trichuris spp. There were no significant differences between the Crioulo Lageano and crossbred Angus groups in terms of worm burden or nematode fecal egg count, nor in terms of the mean levels of immunoglobulin (G and A) against C. punctata and H. placei antigens, except in IgA mean level in abomasal mucus against H. placei adult worms that was significantly higher in crossbred Angus cattle (p<0.05). At the end of the study, the crossbred Angus cattle were heavier than were the Crioulo Lageano cattle (mean live weight, 507.35 and 390.3. kg, respectively). Comparative parasitological and immunological evaluation revealed no difference between two breeds in terms of their natural resistance against GINs. © 2012 Elsevier B.V.

Persistent efficacy of 3.5% doramectin compared to 3.15% ivermectin against gastrointestinal nematodes in experimentally-infected cattle in Brazil

The present study aimed to evaluate the persistent efficacy of a 3.5% doramectin* (700μg/kg) formulation compared to 3.15% ivermectin** (630μg/kg) treatment, administered subcutaneously at a dose of 1mL/50kg body weight in cattle experimentally infected with gastrointestinal nematodes. Seventy-two male crossbred Holstein cattle that were negative for helminth infection were divided into nine groups. Treatments of 3.5% doramectin (Groups 2, 4, 6 and 8) and 3.15% ivermectin (Groups 3, 5, 7 and 9) were administered on days 49, 42, 35 and 28 prior to challenge with infectious nematode larvae (L3). Animals in the control group (Group 1) received saline solution on day 49 before challenge. Beginning on day zero, each animal received 50mL orally of a mixed culture containing approximately 3,000 third stage larvae (L3) of Haemonchus (60%), Oesophagostomum (20%), Cooperia (15%) and Trichostrongylus (5%) for seven consecutive days, resulting in a total challenge of 21,000 larvae/animal. Due to the large number of cattle, autopsies were performed between days 28 and 35 after the last day of inoculation. The formulation containing doramectin (700 mcg/kg) achieved persistent efficacy against H. placei and C. punctata for 49 and 35days, respectively. The persistent efficacy of ivermectin (630 mcg/kg) against H. placei lasted for 49days, but this treatment was ineffective against C. punctata. Both formulations demonstrated persistent efficacy against T. axei for 49days. The persistent efficacy of doramectin (700 mcg/kg) and ivermectin (630 mcg/kg) lasted for 49 and 42days against O. radiatum, respectively. © 2012 Elsevier Ltd.

Micro-raman spectroscopic characterization of a CR-39 detector

Characterization by micro-Raman spectroscopy of polymeric materials used as nuclear track detectors reveals physico-chemical and morphological information on the material's molecular structure. In this work, the nuclear track detector poly(allyl diglycol carbonate), or Columbia Resin 39 (CR-39), was characterized according to the fluence of alpha particles produced by a 226Ra source and chemical etching time. Therefore, damage of the CR-39 chemical structure due to the alpha-particle interaction with the detector was analyzed at the molecular level. It was observed that the ionization and molecular excitation of the CR-39 after the irradiation process entail cleavage of chemical bonds and formation of latent track. In addition, after the chemical etching, there is also loss of polymer structure, leading to the decrease of the group density C-O-C (∼888 cm-1), CH=CH (∼960 cm -1), C-O (∼1110 cm-1), C-O-C (∼1240 cm -1), C-O (∼1290 cm-1), C-O (∼1741 cm -1), -CH2- (∼2910 cm-1), and the main band -CH2- (∼2950 cm-1). The analyses performed after irradiation and chemical etching led to a better understanding of the CR-39 molecular structure and better comprehension of the process of the formation of the track, which is related to chemical etching kinetics. Copyright © 2013 Society for Applied Spectroscopy.

Structure control of poly(p-phenylene vinylene) in layer-by-layer films by deposition on a charged poly(o-methoxyaniline) cushion

In this paper, we demonstrate that the intrinsic electric field created by a poly(o-methoxyaniline) (POMA) cushion layer hinders the changes in molecular conformation of poly(p-phenylenevinylene) (PPV) in layer-by-layer with dodecylbenzene sulfonic acid (DBS). This was modeled with density functional theory (DFT) calculations where an energy barrier hampered molecular movements of PPV segments when they were subjected to an electric field comparable to that caused by a charged POMA layer. With restricted changes in molecular conformation, the PPV film exhibited Franck-Condon transitions and the photoexcitation spectra resembled the absorption spectra, in contrast to PPV/DBS films deposited directly on glass, with no POMA cushion. Other effects from the POMA cushion were the reduced number of structural defects, confirmed with Raman spectroscopy, and an enhanced PPV emission at high temperatures (300 K) in comparison with the films on bare glass. The positive effects from the POMA cushion may be exploited for enhanced opto-electronic devices, especially as the intrinsic electric field may assist in separating photoexcited electron-hole pairs in photovoltaic devices. © 2013 American Institute of Physics.

Genome-wide association study for birth weight in Nellore cattle points to previously described orthologous genes affecting human and bovine height

Background: Birth weight (BW) is an economically important trait in beef cattle, and is associated with growth- and stature-related traits and calving difficulty. One region of the cattle genome, located on Bos primigenius taurus chromosome 14 (BTA14), has been previously shown to be associated with stature by multiple independent studies, and contains orthologous genes affecting human height. A genome-wide association study (GWAS) for BW in Brazilian Nellore cattle (Bos primigenius indicus) was performed using estimated breeding values (EBVs) of 654 progeny-tested bulls genotyped for over 777,000 single nucleotide polymorphisms (SNPs).Results: The most significant SNP (rs133012258, PGC = 1.34 × 10-9), located at BTA14:25376827, explained 4.62% of the variance in BW EBVs. The surrounding 1 Mb region presented high identity with human, pig and mouse autosomes 8, 4 and 4, respectively, and contains the orthologous height genes PLAG1, CHCHD7, MOS, RPS20, LYN, RDHE2 (SDR16C5) and PENK. The region also overlapped 28 quantitative trait loci (QTLs) previously reported in literature by linkage mapping studies in cattle, including QTLs for birth weight, mature height, carcass weight, stature, pre-weaning average daily gain, calving ease, and gestation length.Conclusions: This study presents the first GWAS applying a high-density SNP panel to identify putative chromosome regions affecting birth weight in Nellore cattle. These results suggest that the QTLs on BTA14 associated with body size in taurine cattle (Bos primigenius taurus) also affect birth weight and size in zebu cattle (Bos primigenius indicus). © 2013 Utsunomiya et al.; licensee BioMed Central Ltd.