Determinação da variação da viscosidade intrínseca do poli (tereftalato de etileno) de embalagens

O mercado de embalagens de poli(tereftalato de etileno) -PET- para acondicionamento de refrigerantes, água mineral, sucos concentrados e óleos comestíveis apresenta polímeros de diferentes tipos, que foram desenvolvidos para personalizar o atendimento a clientes desejosos de propriedades melhores e mais específicas, principalmente em termos de massa molar. No caso do PET, assim como na indústria da reciclagem do polímero, o ensaio de viscosidade intrínseca é muito usado para determinar a massa molar. Este trabalho apresenta os resultados de viscosidade intrínseca de PET advindo de embalagens de várias marcas de refrigerantes, sucos e óleos de soja. Amostras de cada embalagem foram dissolvidas em solução de fenol-tetracloroetano (60:40 em peso) e o fluxo das mesmas em um viscosímetro Cannon-Fenske a 30 °C para medir a viscosidade relativa, que foi convertido para viscosidade intrínseca. Os resultados mostraram uma variação no valor da propriedade conforme se variava o volume, tipo e a marca do produto envasado. Para as 21 amostras analisadas, os resultados variaram de 0,70 a 0,79 dL/g. Portanto, uma melhor seleção das embalagens pode ajudar os recicladores na obtenção de produtos melhores, com menor variação na massa molar. Os valores de densidade obtidos apresentaram uma pequena variação, que torna-se maior quando transformados em cristalinidade.

Influência do tipo de coleta (comum ou seletiva) na reciclagem de filmes de poliolefinas pós-consumo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Armazenamento refrigerado de banana 'Prata Anã' proveniente de cachos com 16, 18 e 20 semanas

Conduziu-se este trabalho, com o objetivo de verificar a influência da temperatura de refrigeração e idade do cacho sobre a conservação e qualidade pós-colheita da banana 'Prata Anã', produzida no Norte de Minas Gerais, visando a exportação. Utilizaram-se frutos de bananeira 'Prata Anã' provenientes do município de Nova Porteirinha, MG. A colheita foi realizada na 16ª, 18ª e 20ª semanas após a emissão floral. Dos cachos colhidos, utilizou-se às segundas pencas, separadas em buquês com 5 frutos, lavados e pesados (18 kg). em seguida, os frutos foram revestidos com embalagens de polietileno de baixa densidade, com 50m de espessura, sob vácuo parcial, acondicionados em caixas de papelão e distribuídos em paletes. Depois de embalados e paletizados, os frutos foram transportados para a EPAMIG/CTNM, onde foram armazenados em câmaras de refrigeração (10 e 12ºC) e umidade relativa de 95%, por um período de 35 dias, sendo analisados antes e após a refrigeração. O armazenamento de bananas 'Prata Anã', provenientes de cachos com 16, 18 e 20 semanas, por 35 dias a temperaturas de 10 e 12ºC, não promoveu chilling nos frutos. A temperatura de 10ºC foi mais eficaz em prevenir a evolução da coloração da casca de bananas provenientes de cachos com 18 semanas, que à temperatura de 12ºC, enquanto as temperaturas de 10 e 12ºC foram igualmente eficientes na contenção da mudança de cor de bananas provenientes de cachos com 16 semanas. Frutos provenientes de cachos com 20 semanas amadureceram desuniformemente, ao longo do armazenamento refrigerado.

Influência do substrato e do tipo de fertilizante na aclimatação de mudas de bananeira 'Prata-Anã'

Objetivando-se avaliar a influência do substrato e tipo de fertilizante na aclimatação de mudas de bananeira 'Prata-Anã', provenientes de micropropagação, foi instalado um experimento em blocos casualizados, no esquema fatorial 5 x 3, com quatro repetições. Os substratos utilizados foram: S1 - Terra de subsolo + casca de arroz carbonizada + substrato comercial Rendimax Floreira®; S2 - Terra de subsolo + casca de arroz carbonizada + composto orgânico Organifol®; S3 - Terra de subsolo + casca de arroz carbonizada + composto orgânico Organifol® 9% SiO; S4 - substrato comercial Technes Vivatto®; S5 - Areia grossa + casca de arroz carbonizada + Rendimax Floreira®, todos na proporção 1:1:1 (v/v/v). Os fertilizantes utilizados foram: SF - sem fertilizante; FLL - fertilizante de liberação lenta, 14-14-14 (5,0 kg m-3) misturado ao substrato; e FLN - fertilizante de liberação normal, 14-14-14 (5,0 kg m-3) aplicado em cobertura, 30 dias após o plantio. As mudas foram plantadas em sacos de polietileno quando apresentavam quatro a cinco folhas, sendo mantidas em viveiro com 50% de sombreamento. Foram feitas medidas de altura, diâmetro do colo e número de folhas, e determinada a massa seca das mudas. As diferenças químicas das misturas utilizadas como substrato, juntamente com o tipo de fertilizante utilizado, proporcionaram crescimento diferenciado das mudas. O substrato S4 pode ser utilizado sem fertilização. Os substratos S2 e S3 devem ser utilizados com fertilizante de liberação normal ou lenta de nutrientes, e S1 e S5, sendo pobres em nutrientes, com fertilizante de liberação lenta.

Fibras reforçadas por resina (FRC) em Ortodontia. Versatilidade clínica: parte 2

As fibras de vidro e de polietileno podem ser utilizadas na prática ortodôntica em diversas situações clínicas, nos casos com ou sem extrações dentárias. Este artigo tem como objetivo mostrar algumas das aplicações clínicas nas quais as fibras contribuíram de forma significativa para a realização dos tratamentos ortodônticos, simplificando-os e aumentando a eficiência clínica. As fibras foram utilizadas principalmente em segmentos de ancoragem e na substituição da banda pela colagem da associação fibra/tubo nos molares.

EFFECT OF WATER POTENTIAL ON GERMINATION OF SEEDS OF STYLOSANTHES-GUIANENSIS (AUBL) SW

Effect of water potential on germination of seeds of Slylosanthes guianensis (Aubl.) Sw. To evaluate the water potential effect on germination of S. guianensis two experiments were performed.The first one used osmotic pre-treatment in the imbibition phase and after this period (14 h) the seeds were germinated on filter paper moistened with distilled water. In the second experiment, besides the imbibition phase, seeds were kept in a range of water potentials during all the process. The potentials ranged from 0 to -18 bars, with 3 bars increments, induced by mannitol or by polyethylene glycol. Each treatment was replicated 3 times with 100 seeds per replication. The seeds pre-treated during imbibition had high germination percentage, the highest being the ones in polhyetylene glycol. In the second experiment the polyethylene glycol solutions reduced dramatically the germination percentage in relation to mannitol. From -12 bars on germination ceased in the polyethylene glycol treatments, while in mannitol solution there was 52,67% of germination, in the same water potential.

Evaluation of the tissue response to MTA and MBPC: Microscopic analysis of implants in alveolar bone of rats

The aim of this study was to evaluate and compare the quantitative and qualitative inflammatory responses and bone formation potential after implantation of polyethylene tubes filled with a new calcium hydroxide containing sealer (MBPc) and Prolloot mineral trioxide aggregate (MIA). There were 48 Wistar rats divided in three groups: Group I (control group) empty polyethylene tubes were implanted in the extraction site; group II and III, polyethylene tubes were implanted filled with ProRoot mineral trioxide aggregate (MIA) and MBPc, respectively. At 7, 15, and 30 days after tube implantation, the animals were killed, the hemi-maxillas were removed and prepared to light microscopic analyses. The scores obtained were submitted to Kruskal-Wallis statistical test (p < 0.05). Significant differences between the materials were not observed. The results showed that both materials had similar biological response.

Do all tannins have similar nutritional effects? A comparison of three Brazilian fodder legumes

Three tropical legumes, namely Leucaena leucocephala, Sesbania sesban and Cajanus cajan, were subjected to chemical analysis plus in vitro, in situ and in vivo evaluations. Three different assays were used to determine total tannins: adsorption to polyvinyl pyrrolidine (PVPP-tannins), radial diffusion (RD-tannins) and protein precipitation capacity (BSA-tannins). Total phenols, total tannins and condensed tannins were highest for Sesbania. RD-tannins were correlated with total phenols (r(2) = 0.93), PVPP-tannins (r(2) = 0.92) and condensed tannins (r(2) = 0.99). The protein precipitation capacity of Sesbania, Leucaena and Cajanus were 25.9, 6.13 and 4.05 mu g BSA/g DM, respectively.Gas production at 24h was negatively correlated with total phenols (r(2) = 0.99), PVPP-tannins (r(2) = 0.99) and condensed tannins (r(2) = 0.91). The RD-, PVPP-tannins and the response to polyethylene glycol (PEG) in the gas production assay appeared to be useful as a first screen for tannins.In situ degradability did not reflect any adverse effects of tannins. However, in vivo experiments showed that the apparent DM digestibility of Sesbania and Leucaena was lower than the basal diet. The apparent protein digestibility was lower for all legumes compared to the basal diet. Most treatments caused a negative nitrogen balance. The problems associated with browse feeding were not only related to tannin contents, other factors such as inherently poor digestibility and low energy intake may also have lead to the poor animal performance on these diets. We propose, given the limitations of current tannin assays, that it is not possible to predict beneficial or harmful nutritional effects from total tannin concentrations per se. (C) 2004 Elsevier B.V. All rights reserved.

Recycling potential of urban solid waste destined for sanitary landfills: the case of Indaiatuba, SP, Brazil

The urban solid waste of the city of Indaiatuba (pop. 175 000), located in the state of São Paulo, was characterized, focusing on the recycling potential. For this purpose, collected waste was subdivided into 27 items, classified by mass and volume. About 90% of this waste was found to be potentially recyclable and only 10% requiring landfilling. The compostable organic matter, in the form of food and garden waste, both with high moisture content (51 and 41%, respectively), represents 54% in mass and 21% in volume. The most common type of plastic in this waste is high density polyethylene, whose estimated disposal is about 5000 kg day(-1). A socio-economic analysis of the waste generation indicates that low-income neighbourhoods discard relatively less packaging and more food waste, shoes and construction debris than middle and high income ones, which may be due to low purchasing power and schooling. Our findings indicate that more aluminium and uncoloured polyethylene terephthalate is discarded in the warmest months of the year, probably due to a greater consumption of canned and bottled drinks.

Influence of condensed tannins from Brazilian semi-arid legumes on ruminal degradability, microbial colonization and ruminal enzymatic activity in Saanen goats

The present study aimed at determining the influence of condensed tannins present in the Brazilian legume species Mimosa hostilis, Mimosa caesalpinifolia and Bauhinia cheilantha on ruminal degradability, microbial colonization and enzymatic activity. Polyethylene glycol (PEG) was used to reduce the astringency and concentration of soluble condensed tannins. Four ruminally-cannulated Saanen goats (60 +/- 8 kg BW) were fed, in two experimental periods, with a hay diet based on the studied legumes treated or non-treated with PEG. Voluntary intake, microbial colonization, DM, CP, NDF, and ruminal degradability of PEG treated and non-treated forage leaves, as well as pH, ammonia and 1,4 P-endoglucanase activity of the rumen content were evaluated. Astringency and soluble tannin concentration of the studied legumes were reduced by approximately 70% and 50%, respectively, with PEG treatment. Average DM intake was higher for the treated diet (16.76 g DM/kg BW/day against 13.06 g DM/kg BW/day). Percentile values for degradation parameters and for potential and effective degradabilities of DM, CP and NDF were also affected by the tannins, but at different intensities. Electron microscopic observations of ruminally-incubated legume leaves showed a more effective microbial colonization of PEG-treated leaves for all legume species. A decrease in pH and an increase in ammonia concentration and in endoglucanase activity in the ruminal content was also observed for PEG-treated diets at all sampling periods. Condensed tannins of the studied legume species have influenced the adhesion conditions, colonization and enzymatic activity of the microbial ecosystem, and consequently the ruminal degradation of the different dietary fractions. For this reason, the reduction in condensed tannin would be of great importance to improve the nutrition of ruminant feeding of these species. (c) 2005 Elsevier B.V. All rights reserved.

Qualidade do melão ‘Orange Flesh’ minimamente processado armazenado sob atmosfera modificada

This work aimed at evaluate the effect of the fresh cut 'Orange Flesh' melon stored under modified atmosphere. The cubes of melons were sanitizationed with 100 mg L-1 of hypoclorite of sodium for one minute, washed, drained and wrapped with different concentrations of O-2 and CO2 in plastic bags of polyethylene (Nylon Polished). They were appraised every other day for ten days as regards the firmness, total pectin, soluble pectin and activity of the polifenoloxidase and peroxidase. At the end of the conservation period, it was verified that melons sustained the firmest texture of the vegetable products under modified atmosphere, and the concentration of 5%O-2 + 3% CO2 showed smaller content of total pectin and together with the concentration of 100% N-2 the smallest content of soluble pectin, the polifenoloxidase activity was not verified as well as of the peroxidase.

Titanium and zirconium complexes containing sterically hindered hydrotris(pyrazolyl)borate ligands: synthesis, structural characterization, and ethylene polymerization studies

The synthesis, characterization and ethylene polymerization behavior of a set of Tp'MCl3 complexes (4, M = Ti, Tp' HB(3-neopentyl-pyrazolyl)(3)(-) (Tp(NP)); 5, M = Ti, Tp'= HB(3-tert-butyl-pyrazolyl)(3)(-) (Tp(tBu)); 6, M = Ti, Tp' = HB(3-phenyl-pyrazolyl)(3)(-) (Tp(Ph)); 7, M = Zr, Tp' = HB(3-phenyl-pyrazolyl)(3)(-) (Tp(ph)); 8, M = Zr, Tp' = HB(3-tert-butyl-pyrazolyl)(3)(-) (Tp(tBu))) is described. Treatment of these tris(pyrazolyl)borate Group IV compounds with methylalumoxane (MAO) generates active catalysts for ethylene polymerization. For the polymerization reactions performed in toluene at 60 degreesC and 3 atm of ethylene pressure, the activities varied between 1.3 and 5.1 X 10(3) g of PE/mol[M](.)h. The highest activity is reached using more sterically open catalyst precursor 4. The viscosity-average molecular weights ((M-v) over bar) of the PE's produced with these catalyst precursors varying from 3.57 to 20.23 x 10(5) gmol(-1) with melting temperatures in the range of 127-134 degreesC. Further polymerization studies employing 7 varying Al/Zr molar ratio and temperature of polymerization showed that the activity as well as the polymer properties are dependent on these parameters. In that case, higher activity was attained at 60 degreesC. The viscosity-average molecular weights of the polyethylene's decreases with increasing AI/Zr molar ratio. (C) 2003 Elsevier B.V. All rights reserved.

SUPEROXIDE RADICAL AND TOXICITY OF ENVIRONMENTAL NICKEL EXPOSURE

Three nickel compounds were tested for pancreatic, hepatic and osteogenic damage in rats by a single i.m. injection Ni++ (7 mg kg(-1)). The nickel induced biochemical alterations included significantly increased levels of serum alkaline phosphatase in rats with NiS (75%) and NiO (50%). Amylase and aspartate transaminase were also increased, and lipoperoxide was increased in rats with NiO (5.6-fold) and NiS (3.4-fold). No serum changes were observed with NiCl2. Daily injection of Cu-Zn superoxide dismutase (SOD) conjugated with polyethylene glycol prevented the serum level changes, indicating that superoxide radical is an important intermediate in toxicity of nickel insoluble compounds.

Effect of sodium hypochlorite and five intracanal medications on Candida albicans in root canals

The aim of this study was to evaluate the effect of 1% sodium hypochlorite and five intracanals medications on Candida albicans harvested inside root canals. The contaminated canals were irrigated with sterile saline solution and then treated as follows: (i) filled with Calen paste (calcium hydroxide/glycol polyethylene paste); (ii) filled with camphorated paramonochloro phenol (CPMC); (iii) filled with 2% iodine-iodate solution; (iv) filled with tricresol formalin; (v) filled with Calen and CPMC pastes; (vi) irrigation with 1% sodium hypochlorite and filled with no intracanal medication; and (vii) no intracanal medication was used. Canal access and the apical foramen were then sealed with Cavit and the roots were stored in a humid chamber at 37 +/- 1 degreesC for 14 days. The canals were reinstrumented and irrigated with sterile saline solution. Sterile paper points were used to transfer the root canal contents to test tubes containing sterile saline solution. Part of the suspension was harvested in Sabouraud dextrose agar with chloramphenicol and incubated at 37 +/- 1 degreesC for 48 h, CPMC was effective in 100% of the samples followed in decreasing order of effectiveness by calcium hydroxide with CPMC (70% effective), 1% sodium hypochlorite (70% effective) (p < 0.05), tricresol formalin (60% effective), 2% iodine-iodate solution (50% effective), calcium hydroxide paste (30% effective), and saline + no intracanal medication.