Review and future directions in the modelling and control of continuous drum granulation

Many granulation plants operate well below design capacity, suffering from high recycle rates and even periodic instabilities. This behaviour cannot be fully predicted using the present models. The main objective of the paper is to provide an overview of the current status of model development for granulation processes and suggest future directions for research and development. The end-use of the models is focused on the optimal design and control of granulation plants using the improved predictions of process dynamics. The development of novel models involving mechanistically based structural switching methods is proposed in the paper. A number of guidelines are proposed for the selection of control relevant model structures. (C) 2002 Published by Elsevier Science B.V.

Use of liquid phase adsorption for characterizing pore network connectivity in activated carbon

A simple percolation theory-based method for determination of the pore network connectivity using liquid phase adsorption isotherm data combined with a density functional theory (DFT)-based pore size distribution is presented in this article. The liquid phase adsorption experiments have been performed using eight different esters as adsorbates and microporous-mesoporous activated carbons Filtrasorb-400, Norit ROW 0.8 and Norit ROX 0.8 as adsorbents. The density functional theory (DFT)-based pore size distributions of the carbons were obtained using DFT analysis of argon adsorption data. The mean micropore network coordination numbers, Z, of the carbons were determined based on DR characteristic plots and fitted saturation capacities using percolation theory. Based on this method, the critical molecular sizes of the model compounds used in this study were also obtained. The incorporation of percolation concepts in the prediction of multicomponent adsorption equilibria is also investigated, and found to improve the performance of the ideal adsorbed solution theory (IAST) model for the large molecules utilized in this study. (C) 2002 Elsevier Science B.V. All rights reserved.

Study on diffusion and flow of benzene, n-hexane and CCl4 in activated carbon by a differential permeation method

In this paper the diffusion and flow of carbon tetrachloride, benzene and n-hexane through a commercial activated carbon is studied by a differential permeation method. The range of pressure is covered from very low pressure to a pressure range where significant capillary condensation occurs. Helium as a non-adsorbing gas is used to determine the characteristics of the porous medium. For adsorbing gases and vapors, the motion of adsorbed molecules in small pores gives rise to a sharp increase in permeability at very low pressures. The interplay between a decreasing behavior in permeability due to the saturation of small pores with adsorbed molecules and an increasing behavior due to viscous flow in larger pores with pressure could lead to a minimum in the plot of total permeability versus pressure. This phenomenon is observed for n-hexane at 30degreesC. At relative pressure of 0.1-0.8 where the gaseous viscous flow dominates, the permeability is a linear function of pressure. Since activated carbon has a wide pore size distribution, the mobility mechanism of these adsorbed molecules is different from pore to pore. In very small pores where adsorbate molecules fill the pore the permeability decreases with an increase in pressure, while in intermediate pores the permeability of such transport increases with pressure due to the increasing build-up of layers of adsorbed molecules. For even larger pores, the transport is mostly due to diffusion and flow of free molecules, which gives rise to linear permeability with respect to pressure. (C) 2002 Elsevier Science Ltd. All rights reserved.

Production of mosquitoes in rainwater tanks and wells on Yorke Island, Torres Strait: Preliminary study

The Torres Strait in northernmost Queensland, Australia, is subject to periodic outbreaks of dengue. A large outbreak of dengue 2 in 1996-97 affected five islands, resulting in 200 confirmed cases. On most of the affected islands, rainwater tanks were a common breeding site for vector mosquitoes. Rainwater tanks, wells and household containers filled with water are the most common breeding sites for dengue mosquitoes (Aedes aegypti), the primary vector of dengue in Queensland. We report on surveys conducted in February 2002 to measure the productivity of rainwater tanks and wells on Yorke Is. (Torres Strait), the first time the productivity of rainwater tanks has been measured in Australia. Of 60 rainwater tanks sampled, 10 had broken screens. Using a sticky emergence trap, 179 adult mosquitoes were collected, consisting of 63 Aedes scutellaris and 116 Culex quinquefasciatus. One unscreened tank produced 177 (99%) of the adults. A plankton net was used to sample 16 wells; 12 positive wells yielded 111 immature (larvae and pupae) mosquitoes, consisting of 57% and 43% Ae. scutellaris and Cx. quinquefasciatus, respectively. The apparent displacement of Ae. aegypti by Ae. scutellaris is discussed. Measures to reduce the likelihood of future dengue outbreaks are recommended.

gamma-alumina nanofibers prepared from aluminum hydrate with poly(ethylene oxide) surfactant

Introducing poly(ethylene oxide) surfactant to aluminum hydrate colloids can effectively direct the crystal growth of boehmite and the crystal morphology of final gamma-alumina crystallites. Fibrous crystallites of gamma-alumina about 3-4 nm thick and 30-60 nm long are obtained. They stack randomly, resulting in a structure with a low contact area between the fibers but with a very large porosity. Such a structure exhibits strong resistance to sintering when heated to high temperatures. A sample retains a BET surface area of 68 m(2)/g, after being heated to 1473 K. The surfactant molecules form micelles that interact with the colloid particles of aluminum hydroxide through hydrogen bonding. This interaction is not sufficient to change the intrinsic crystal structure of boehmite, but induces profound changes in the morphology of boehmite crystallites and their growth. The surfactant-induced fiber formation (SIFF) process has distinct features from templated synthesis but shows similarities in some respects to biomineralization processes in which inorganic crystals with complex morphological shapes can be formed in biological systems. SIFF offers an effective approach to create new nanostructures of inorganic oxide from aqueous media.

Novel composites of TiO2 (anatase) and silicate nanoparticles

Thermally stable composite nanostructures of titanium dioxide (anatase) and silicate nanoparticles were prepared from Laponite clay and a sol of titanium hydrate in the presence of poly(ethylene oxide) (PEO) surfactants. Laponite is a synthetic clay that readily disperses in water and exists as exfoliated silicate layers of about 1-nm thick in transparent dispersions of high pH. The acidic sol solution reacts with the clay platelets and leaches out most of the magnesium in the clay, while the sol particles hydrolyze further due to the high pH of the clay dispersion. As a result, larger precursors of TiO2 nanoparticles form and condense on the fragmentized pieces of the leached silicate. Introducing PEO surfactants into the synthesis can significantly increase the porosity and surface area of the composite solids. The TiO2 exists as anatase nanoparticles that are separated by silicate fragments and voids such that they are accessible to organic molecules. The size of the anatase particle can be tailored by manipulating the experimental parameters at various synthesis stages. Therefore, we can design and engineer composite nanostructures to achieve better performance. The composite solids exhibit superior properties as photocatalysts for the degradation of Rhodamine 6G in aqueous solution.

Porous solids from layered clays by combined pillaring and templating approaches

The pore structure formation in bentonite, pillared with a mixed sol of silicon and titanium hydroxides and treated subsequently with quaternary ammonium surfactants, is investigated. The surfactant micelles act as a template, similar to their role in MCM41 synthesis. Because both the surfactant micelles and the sol particles are positively charged, it is greatly favorable for them to form meso-phase assembles in the galleries between the clay layers that bear negative charges. Besides, the sol particles do not bond the clay layers strongly as other kinds of pillar precursors do, so that the treatment with surfactants can result in radical structure changes in sol-pillared clays. This allows us to tailor the pore structure of these porous clays by choice of surfactant. The surfactant treatment also results in profound increases in porosity and improvement in thermal stability. Therefore, the product porous clays have great potential to be Used to deal with large molecules or at high operating temperatures. We also found that titanium in these samples is highly dispersed in the silica matrix rather than existing in the form of small particles of pure titania. Such highly dispersed Ti active centers may offer excellent activities for catalytic oxidation reactions such as alkanes into alcohols and ketones.

Electron exchange coupling for single-donor solid-state spin qubits

Intervalley interference between degenerate conduction band minima has been shown to lead to oscillations in the exchange energy between neighboring phosphorus donor electron states in silicon [B. Koiller, X. Hu, and S. Das Sarma, Phys. Rev. Lett. 88, 027903 (2002); Phys. Rev. B 66, 115201 (2002)]. These same effects lead to an extreme sensitivity of the exchange energy on the relative orientation of the donor atoms, an issue of crucial importance in the construction of silicon-based spin quantum computers. In this article we calculate the donor electron exchange coupling as a function of donor position incorporating the full Bloch structure of the Kohn-Luttinger electron wave functions. It is found that due to the rapidly oscillating nature of the terms they produce, the periodic part of the Bloch functions can be safely ignored in the Heitler-London integrals as was done by Koiller, Hu, and Das Sarma, significantly reducing the complexity of calculations. We address issues of fabrication and calculate the expected exchange coupling between neighboring donors that have been implanted into the silicon substrate using an 15 keV ion beam in the so-called top down fabrication scheme for a Kane solid-state quantum computer. In addition, we calculate the exchange coupling as a function of the voltage bias on control gates used to manipulate the electron wave functions and implement quantum logic operations in the Kane proposal, and find that these gate biases can be used to both increase and decrease the magnitude of the exchange coupling between neighboring donor electrons. The zero-bias results reconfirm those previously obtained by Koiller, Hu, and Das Sarma.

A unit cell waveguide model of a reflectarray formed by microstrip patches and slots

An equivalent unit cell waveguide approach (WGA) is described to obtain reflection coefficient phase curves for designing a microstrip patch reflectarray supported by a ground plane with periodic apertures or slots. Based on the presented theory, a computer algorithm for determining the reflection coefficient of a plane wave normally incident on a multi-layer structure of patches and apertures is developed. The validity of the developed algorithm is verified by comparing the obtained results with those published in the literature and the ones generated by Agilent High Frequency Structure Simulator (HFSS). A good agreement in all the presented examples is obtained, proving that the developed theory and computer algorithm can be an effective tool for designing multi-layer microstrip reflectarrays with a periodically perforated ground plane. (C) 2003 Wiley Periodicals, Inc.

Designing a 161-element Ku-band microstrip reflectarray of variable size patches using an equivalent unit cell waveguide approach

An equivalent unit cell waveguide approach (WGA) to designing 4 multilayer microstrip reflectarray of variable size patches is presented. In this approach, a normal incidence of a plane wave on an infinite periodic array of radiating elements is considered to obtain reflection coefficient phase curves for the reflectarray's elements. It is shown that this problem is equivalent to the problem of reflection of the dominant TEM mode in a waveguide with patches interleaved by layers of dielectric. This waveguide problem is solved using a field matching technique and a method of moments (MoM). Based on this solution, a fast computer algorithm is developed to generate reflection coefficient phase curves for a multilayer microstrip patch reflectarray. The validity of the developed algorithm is tested against alternative approaches and Agilent High Frequency Structure Simulator (HFSS). Having confirmed the validity of the WGA approach, a small offset feed two-layer microstrip patch array is designed and developed. This reflectarray is tested experimentally and shows good performance.

Dynamic stability of laminated FGM plates based on higher-order shear deformation theory

This paper conducts a dynamic stability analysis of symmetrically laminated FGM rectangular plates with general out-of-plane supporting conditions, subjected to a uniaxial periodic in-plane load and undergoing uniform temperature change. Theoretical formulations are based on Reddy's third-order shear deformation plate theory, and account for the temperature dependence of material properties. A semi-analytical Galerkin-differential quadrature approach is employed to convert the governing equations into a linear system of Mathieu-Hill equations from which the boundary points on the unstable regions are determined by Bolotin's method. Free vibration and bifurcation buckling are also discussed as subset problems. Numerical results are presented in both dimensionless tabular and graphical forms for laminated plates with FGM layers made of silicon nitride and stainless steel. The influences of various parameters such as material composition, layer thickness ratio, temperature change, static load level, boundary constraints on the dynamic stability, buckling and vibration frequencies are examined in detail through parametric studies.

Simultaneous observations of ionospheric quasiperiodic scintillations from short and long meridional baselines using VHF transmissions from transit satellites

For the first time it was possible to observe regular quasiperiodic scintillations (QPS) in VHF radio-satellite transmissions from orbiting satellites simultaneously at short (2.1 km) and long (121 km) meridional baselines in the vicinity of a typical mid-latitude station (Brisbane; 27.5degreesS and 152.9degreesE geog. and 35.6degrees invar.lat.), using three sites (St. Lucia-S, Taringa-T in Brisbane and Boreen Pt.-B, north of Brisbane). A few pronounced quasiperiodic (QP) events were recorded showing unambiguous regular structures at the sites which made it possible to deduce a time displacement of the regular fading minimum at S, T and B. The QP structure is highly dependent on the geometry of the ray-path from a satellite to the observer which is manifested as a change of a QP event from symmetrical to non-symmetrical for stations separated by 2.1 km, and to a radical change in the structure of the event over a distance of 121 km. It is suggested the short-duration intense QP events are due to a Fresnel diffraction (or a reflection mechanism) of radio-satellite signals by a single ionospheric irregularity in a form of an ellipsoid with a large ionization gradient along the major axis. The structure of a QP event depends on the angle of viewing of the irregular blob from a radio-satellite. In view of this it is suggested that the reported variety of the ionization formation, responsible for different types of QPS, is only apparent but not real. (C) 2003 Elsevier Science Ltd. All rights reserved.

Cobertura permanente de solo com leguminosas herbáceas perenes no cultivo de bananeiras no médio Vale do Jequitinhonha

A região da Caatinga é caracterizada pelas altas temperaturas durante o ano e má distribuição das chuvas. Em virtude desses fatores de clima regional, tem-se a necessidade de adoção por práticas que elevem à eficiência e sustentabilidade agrícola local. Assim, objetivou-se avaliar a aptidão de leguminosas herbáceas perenes como cobertura permanente de solo no cultivo de bananeira. Foram conduzidos três experimentos, para avaliação das leguminosas, utilizou-se um delineamento experimental em blocos casualizados, com quatro repetições, em esquema de parcelas subdivididas no espaço e para algumas variáveis, sub-subdividida no tempo, sendo: Fator “A” os dois diferentes ambientes de plantio: municípios de Itaobim/MG e Virgem da Lapa/MG; Fator “B”, nas subparcelas, dois manejos de cobertura do solo e para algumas variáveis, três manejos, constituídos pelas leguminosas: cudzu tropical (Pueraria phaseoloides) calopogônio (Calopogonium mucunoides) e solo descoberto (solo capinado); Fator “C” épocas de coleta de dados. Para avaliação das bananeiras, foram dois experimentos em blocos casualizados, com quatro repetições, em esquema de parcelas sudivididas no espaço, sendo: nas parcelas, fator “A” constituído por três manejos de cobertura do solo, pelas leguminosas: cudzu tropical e o calopogônio, e solo descoberto (solo capinado); fator “B”, nas subparcelas, plantas de bananeiras em três idades morfofisiológicas (diferentes ciclos e tamanhos); Para algumas variáveis que foram submetidas a coletas periódicas, utilizou-se o esquema de parcelas subsubdivididas no tempo, acrescentando-se o fator “C”, datas das coletas nas sub-subparcelas, tendo como referência os dias após semeadura (DAS) das leguminosas. Foram avaliadas as seguintes variáveis: taxa de cobertura do solo; potencial de deposição de folhas e a ciclagem de nutrientes; capacidade de inibição da vegetação espontânea; conservação da temperatura e promoção da retenção de umidade do solo. Também foi avaliado o crescimento vegetativo e produtividade das bananeiras. Como resultados principais, notou-se que as leguminosas proporcionaram eficiente cobertura do solo, o calopogônio apresentou o maior acúmulo de N, P, K, e Ca, via deposição de material senescente, tal como maior inibição das plantas espontâneas nos pomares de bananeiras. Essa cobertura também promoveu uma eficiente redução da temperatura do solo, possibilitando menor variação térmica nas camadas de maior concentração radicular da bananeira, e consequentemente, obtendo maior acúmulo de umidade no solo. As bananeiras cultivadas sobre coberturas vivas de solo apresentaram aumento gradativo no crescimento e peso de cacho. Os resultados reforçam o potencial uso dessas espécies na fruticultura, principalmente em regiões de severas restrições hídricas, como forma de adubação e otimização de diversos processos biológicos em seu ambiente de cultivo.

Aloe vera-based formula as emollient on horses' hooves

The present study aimed at developing an Aloe vera-based formula for topical use on horse hoof and evaluating whether the treatment affects hooves growth and balance. Six healthy male horses between the ages of 3 and 17 years (12±5.25) were used, all semi-confined animals for breeding purposes. Before beginning A. vera treatment, animals underwent two trimming procedures with a 45 days-interval. After the second trimming, one of the forelimbs and one of the hindlimbs of 4 horses was weekly treated by topical application of the glycolic extract of A. vera at 20%. The contralateral limb, randomly chosen, received the extract at 50%. The hooves of the other animals were treated with propylene glycol. Treatment was done for 225 days and, during this time, animals underwent periodic trimming. Variables related to growth and balance of the hooves were measured before and after trimming. Data were analyzed using chi-square test and regression analysis at 5% significance. Growth rate of the hooves was not related to treatment. On the other hand, the 50% extract was related to the majority of the hooves in balance (p<0.05). Results suggest that a weekly topical treatment with A. vera glycolic extract does not improve the growth rate of the hooves; however, when applied at a high concentration, it improves their balance.

The Sticky Information Macro Model: Beyond Perfect Foresight

Sticky information monetary models have been used in the macroeconomic literature to explain some of the observed features regarding inflation dynamics. In this paper, we explore the consequences of relaxing the rational expectations assumption usually taken in this type of model; in particular, by considering expectations formed through adaptive learning, it is possible to arrive to results other than the trivial convergence to a fixed point long-term equilibrium. The results involve the possibility of endogenous cyclical motion (periodic and a-periodic), which emerges essentially in scenarios of hyperinflation. In low inflation settings, the introduction of learning implies a less severe impact of monetary shocks that, nevertheless, tend to last for additional time periods relative to the pure perfect foresight setup.