Is the environmental policies procedures a barrier to development of inland navigation and port management? A case of study in Brazil

The main objective of this article is to discuss the Brazilian environmental legislation and policies towards the development of navigation and port management. The research illustrated some difficulties faced by the country and make suggestions to overcome it. The construction of the environmental legal framework began in the early 1960s and resulted in a very complex system, as a consequence of policies adopted by the country. Nowadays Brazilian environmental policies are developed in democratic and participative way, although with elevated degree of bureaucracy and lack of integration among the several governmental agencies, which makes the approval of environmental certifications demand several years for new port projects or improvements, which delays the economic development of the country. Efforts have been made to simplify the licensing process. As result of this research two flowchart for environmental licenses of ports installation are shown: The first shows the process until 2009 and the second shows the process nowadays. This become an important issue due the fact that inland navigation is one of the less pollutant modes of transportation, and although, the process of environmental certification was simplified, if compare with 2009, it is still complex and time-consuming, delaying the development of the infrastructure. © 2012 Elsevier Ltd.

Effect of different disinfectants on the microhardness and roughness of acrylic resins for ocular prosthesis

Background: Ocular prosthesis materials should have specific properties for their indication and durability; therefore, it is important to investigate their physical behaviour when affected by several disinfectants. Objectives: This study evaluated the influence of different disinfecting solutions on the microhardness and surface roughness of acrylic resins for ocular prosthesis. Materials and Methods: Fifty samples simulating ocular prostheses were fabricated with N1 resin and colourless resin and divided (n = 10) according to the disinfectant used: neutral soap, Opti-free, Efferdent, 1% hypochlorite (HYC) and 4% chlorhexidine (CHX). Samples were stored in saline solution at 37°C and disinfected during 120 days. Both microhardness and roughness were investigated before, after 60 days and 120 days of disinfection and storage. Microhardness was measured using a microhardner and the roughness with a roughness device. Results: N1 resin showed lower microhardness when compared with colourless resin (p < 0.05). HYC and CHX groups exhibited the highest change of microhardness and roughness values (p < 0.05). An increase in roughness and reduction in microhardness of ocular acrylic resins were observed after both periods of disinfection and storage (p < 0.05). Conclusion: Both disinfection/storage periods affected the microhardness and roughness values of the samples. © 2012 The Gerodontology Society and John Wiley & Sons A/S.

Effects of cement-curing mode and light-curing unit on the bond durability of ceramic cemented to dentin

The aim of this study was to evaluate the effects of different light-curing units and resin cement curing types on the bond durability of a feldspathic ceramic bonded to dentin. The crowns of 40 human molars were sectioned, exposing the dentin. Forty ceramic blocks of VITA VM7 were produced according to the manufacturer's recommendations. The ceramic surface was etched with 10% hydrofluoric acid/60s and silanized. The dentin was treated with37% phosphoric acid/15s, and the adhesive was applied. The ceramic blocks were divided and cemented to dentin according to resin cement/RC curing type(dual-and photocured), light-curing unit (halogen light/QTH and LED), and storage conditions (dry and storage/150 days + 12,000 cycles/thermocycling). All blocks were stored in distilled water (37°C/24h) and sectioned (n = 10): G1-QTH + RC Photo, G2-QTH + RC Dual, G3-LED + RC Photo, G4-LED + RC Dual. Groups G5, G6, G7, and G8 were obtained exactly as G1 through G4, respectively, and then stored and thermocycled. Microtensile bond strength tests were performed (EMIC), and data were statistically analyzed by ANOVA and Tukey's test (5%). The bond strength values (MPa) were: G1-12.95 (6.40)ab; G2-12.02 (4.59)ab; G3-13.09 (5.62)ab; G4-15.96 (6.32)a; G5-6.22 (5.90)c; G6-9.48 (5.99)bc; G7-12.78 (11.30)ab; and G8-8.34 (5.98)bc. The same superscript letters indicate no significant differences. Different light-curing units affected the bond strength betweenceramic cemented to dentin when the photocured cement was used, and only after aging (LED>QTH). There was no difference between the effects of dual-and photo-cured resin-luting agents on the microtensile bond strength of the cement used in this study.

The fat body of termites: Functions and stored materials

The functions of the fat body in the different castes of termites, and accumulation of energy reserves, proteins and urates within this organ, are reviewed. The termite fat body is involved in multiple metabolic activities, including recycling of nitrogen. Termite fat body showed three different types of cells: adipocytes, urocytes and mycetocytes, the latter restricted to the species Mastotermes darwiniensis. Adipocytes synthesize and store lipids, glycogen and several proteins. These cells also elaborate important peptides, including some that act in immune processes. Urocytes are responsible for the storage of spherocrystals of urates, which vary quantitatively among the termite castes. The different metabolic functions of the fat body in the several castes and stages of termites are associated with specific adipocyte morphologies. The synthesis and storage of different compounds modify the structure of the fat body; this differentiation is coordinated by hormones involved with molting and reproductive cycles. © 2013 Elsevier Ltd.

Evaluation of weather influence on mechanical and viscoelastic properties of polyetherimide/carbon fiber composites

In order to investigate how environmental degradation affects the mechanical and thermal performance of polyetherimide/carbon fiber laminates, in this work different weathering were conducted. Additionally, dynamic mechanical analysis, interlaminar shear strength tests and non-destructive inspections were performed on this composite before and after being submitted to hygrothermal, UV radiation and thermal shock weathering. According to our results, hygrothermally aged samples had their glass transition temperature and elastic and storage moduli reduced by plasticization effect. Photooxidation, due to UV radiation exposure, occurred only on the surface of the laminates. Thermal shock induced a reversible stress on the composite's interface region. The results revealed that the mechanical behavior can vary during weather exposure but since this variation is only subtle, this thermoplastic laminate can be considered for high-performance applications, such as aerospace. © The Author(s) 2013.

A method for improving the code rate and error correction capability of a cyclic code

Currently, there has been an increasing demand for operational and trustworthy digital data transmission and storage systems. This demand has been augmented by the appearance of large-scale, high-speed data networks for the exchange, processing and storage of digital information in the different spheres. In this paper, we explore a way to achieve this goal. For given positive integers n,r, we establish that corresponding to a binary cyclic code C0[n,n-r], there is a binary cyclic code C[(n+1)3k-1,(n+1)3k-1-3kr], where k is a nonnegative integer, which plays a role in enhancing code rate and error correction capability. In the given scheme, the new code C is in fact responsible to carry data transmitted by C0. Consequently, a codeword of the code C0 can be encoded by the generator matrix of C and therefore this arrangement for transferring data offers a safe and swift mode. © 2013 SBMAC - Sociedade Brasileira de Matemática Aplicada e Computacional.

Avaliação fitoquímica e microbiológica da espécie Artemisia annua L., submetida a tratamentos de armazenamento e condições de ambiente

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação das condições críticas para o surgimento de Aflatoxina na cadeia de processamento de amendoim (Arachis hypogaea L.)

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Qualidade e conservação do morango tratado em pós-colheita com cloreto de cálcio e do armazenamento em atmosfera modificada ativa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Training in the inland freight transportation sector in Latin America

This issue of the FAL Bulletin covers training in the inland freight transportation and logistical operations sector in Latin America and its role in productivity and competitiveness.

Conservação de abacaxi e mamão minimamente processados: associação entre o preparo, a embalagem e a temperatura de armazenamento

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Institutionality, logistics and international cooperation for the economic and social development: The case of the Plurinational State of Bolivia

Includes bibliography.

Análise de viabilidade econômica de um aterro sanitário para cidade de pequeno porte

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hidrocarbonetos policíclicos aromáticos em sedimentos e organismos bentônicos do Terminal de Miramar (Baía do Guajará - Belém - Pará - Amazônia)

ABSTRACT: In Guajará bay, mouth of the Amazon River, is located the capital of Pará state (Belém) and its metropolitan area. Exists in this area an intense boat traffic, as well as transportation and sale of fuels in floating docks and activities related to the storage and transportation of oil in Miramar Petrochemical Terminal (TEMIR). Small spills and discharges of oil in water can serve as sources of pollution by polycyclic aromatic hydrocarbons (PAHs). PAHs are organic compounds generated by incomplete combustion of organic matter (OM) and are among the contaminants of most interest in environmental studies due to their mutagenic and carcinogenic potential. One way to detect and evaluate the impact of PAHs in an environment is using biomonitors, however the qualitative and quantitative analysis in sediments are most widely used. This study aimed to evaluate, by Gas Chromatography/Mass Spectrometry (GC/MS), the 16 PAHs considered as priority by the Environmental Protection Agency of the United States in sediments and benthic organisms (Namalicastys abiuma) of TEMIR. Field expeditions were carried out in December 2012, March, May and June 2013 representing the dried, wet (two samples) and dried seasons successively. Fine sediments levels dominated in both sampling periods and the %Fines in Guajará bays has a direct relationship to the %OM. In relation to the 16 PAHs studied, 10 of them were detected in the wet season sediments samples and 8 in the dried season. Even with a low diversity of aromatic compounds, sediment samples of the dried season presented greater ΣHPAs (1.351,43 ng g^-1) than the sediments of the wet season (263,99 ng g^-1), which can be related to the increased hydrodynamic in Guajará bay this last period. Correlation analysis indicated that ΣHPAs not seem to be influenced by %Fine and %OM. Benzo(a)pyrene accounted for 87% of ΣHPAs during the wet season, the other PAHs showed percentage ≤ 3%. During the other period stood out: pyrene (18% of ΣHPAs) fluoranthene (16%), the chrysene, benzo(b)fluoranthene (15%) and benzo(a)pyrene (11%). The use of the geochemical reason to interpret likely sources of PAHs indicated that there is a predominance of aromatics from pyrolytic origin in TEMIR. The activities that may be responsible for the PAHs levels observed in sediments and benthic organisms in TEMIR are the discharge of untreated domestic sewage and the emissions of particulates from cars and small/medium boats. The ΣHPAs seems to influence the density of polychaetes because a reduction of about 50% in the number of organisms was observed during the dry season when there was the greater amount of ΣHPAs in their body structure. Among the 16 PAHs studied, 11 were detected in the polychaetes during the dry season (ΣHPAs_MED = 848,71 ng g^-1) and 10 in the wet season (ΣHPAs_MED = 141,85 ng g^-1). Were highlighted during the dried season: indeno(1,2,3-c,d)pyrene (47%) and pyrene (23%). While in the wet season: pyrene (23%), chrysene (17%), fluorene (17%) and fluoranthene (13%). The %Rec obtained was >>100% indicating a matrix effect and reducing the quantitative accuracy of results. The use of the polychaete N. abiuma as biomonitor of pollution by PAHs in estuaries not seem to be effective when the sample period is limited, because collecting it requires a great effort to obtain a small amount of mass and it still results in a matrix effect in the chromatographic analysis (method %Rec >> 100%) that may not be corrected due to the restricted availability of sample mass. Studies with a larger number of samples, enabling depth statistical analysis, and covering other collection points in Guajará bay are required to prove mathematically that has been stated in this dissertation.

Desenvolvimento de métodos analiticos para determinação de 'CD', 'CU','NI'e 'PB' em biodiesel por espectrometria de absorção atômica em forno de grafite

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)