Field Evaluation of Engineering Fabrics for Asphalt Concrete Resurfacing - Audubon County, HR-360, Construction Report, 1994

An asphalt concrete (ACC) overlay is most often the rehabilitative effort used to maintain the serviceability of either an ACC or PCC pavement. The major problem in durability of this ACC overlay comes from reflective cracking. These cracks usually open, allowing water to enter the unsealed crack and strip the ACC in the overlay. The stripping of the ACC allows accelerated deterioration at the crack. Two engineering fabrics were evaluated in this project in order to determine their effectiveness in reducing reflective cracking. These two materials are: PavePrep, Contech Construction Products, Inc., and Pro-Guard, Phillips Fiber Corporation. A 4.2 km (2.6 mi) roadway in Audubon County was selected for the research project. The roadway was divided into eight test sections. Four of the test sections are conventional resurfacing. The other four sections are split between the two engineering fabrics (two Pro-Guard and two PavePrep). A 75 mm (3 in.) thick overlay was placed over the entire project.

Engineering Fabric Repair Prior to Resurfacing - Roadglas - US 30, HR-525, 1992

In Iowa it is normal procedure to either use partial or full-depth patching to repair deteriorated areas of pavement prior to resurfacing. The Owens/Corning Corporation introduced a repair system to replace the patching process. Their Roadglas repair system was used in this research project on US 30 in Story County. It was installed in 1985 and has been observed annually since that time. There were some construction problems with slippage as the roller crossed the abundant Roadglas binder. It appears the Roadglas system has helped to control reflective cracking in the research areas. Since the time when this project was completed it has been reported that Owens/Corning has discontinued production of the Roadglas system.

Oils and Tars from Iowa Shales, HR-32, 1962

The inadequate supply of suitable road surfacing material in the southern part of Iowa raises the question of the possibility of utilizing certain shales abundant in this area. These carbonaceous shales commonly overlie the coal beds and may also be found as impurities in the coal seams. They constitute the "slate" which with minor amounts of coal makes up the "gob" piles at the mines. These shales frequently contain enough carbonaceous material to burn. Those which do not usually require only a relatively small amount of coal mixed with them to support combustion. As a result, the "gob" piles frequently burn. The residual shale material is frequently used locally as a road surfacing material. However, since there is no control over the burning, there is no assurance that the product is the most suitable which might be produced or that it is even uniform in its properties. To determine if a controlled burning would produce a suitable road building product economically a research project "Use of Shales as Highway Materials" (ISHC Project HR-21, IEES Project 299-S) was set up in the Iowa Engineering Experiment Station with funds provided by the Iowa State Highway Commission, This project was supervised by Charles Frush, formerly Assistant Professor of Mining Engineering at Iowa State University. The various shales were subjected to controlled burning, and the solid residues were tested for their suitability for highway use.

Time-Temperature Strength-Reaction Product Relationships in Lime-Bentonite-Water Mixtures, HR-111, 1965

The interrelation of curing time, curing temperature, strength, and reactions in lime-bentonite-water mixtures was examined. Samples were molded at constant density and moisture content and then cured for periods of from 1 to 56 days at constant temperatures that ranged from 5C to 60C. After the appropriate curing time the samples were tested for unconfined compressive strength. The broken samples were then analyzed by x-ray diffractometer and spectrophotometer to determine the identity of the reaction products present after each curing period. It was found that the strength gain of lime-clay mixtures cured at different temperatures is due to different phases of the complex reaction, lime & clay to CSH(gel) to CSH(II) to CSH(I) to tobermorite. The farther the reaction proceeds, the higher the strength. There was also evidence of lattice substitutions in the structure of the calcium silicate hydrates at curing temperatures of 50C and higher. No consistent relationship between time, temperature, strength, and the S/A ration of reaction products existed, but in order to achieve high strengths the apparent C/S ration had to be less than two. The curing temperature had an effect on the strength developed by a given amount of reacted silica in the cured lime-clay mixture, but at a given curing temperature the cured sample that had the largest amount of reacted silica gave the highest strength. Evidence was found to indicate that during the clay reaction some calcium is indeed adsorbed onto the clay structure rather than entering into a pozzolanic reaction. Finally, it was determined that it is possible to determine the amount of silica and alumina in lime-clay reaction products by spectrophotometric analysis with sufficient accuracy for comparison purposes. The spectrophotometric analysis techniques used during the investigation were simple and were not time consuming.

SEPT4, a p53 target gene product, implicates p 53 in the regulation of exocytosis

Résumé : Le cancer, qui est responsable d'un quart des décès en Suisse, exhibe un état cellulaire désordonné, qui lui-même, est la conséquence d'un dérèglement des gènes. Le gène le plus fréquemment altéré, dans les cas de cancers humains, est p53. Ce gène encode un facteur de transcription, impliqué dans la régulation de nombreux gènes impliqués dans le cycle cellulaire, l'apoptose ou la différenciation. Notre laboratoire a récemment identifié seize nouveaux gènes, dont l'expression est régulée par p53, parmi lesquels sept4, su jet de cette thèse. La protéine 5EPT4 appartient à la famille des septines, qui est impliquée dans la cytokinèse. Dans ce travail, nous avons confirmé la régulation de l'expression de sept4 par p53 dans des tissus de souris, et étonnamment, seul un des deux promoteurs du gène sept4 est contrôlé par p53. En outre, l'approche immunohistologique nous a permis de supposer une implication de la protéine SEPT4 dans le mécanisme de l'exocytose. Cette hypothèse a été confirmée par l'interaction de SEPT4 avec la protéine syntaxine 1A, et par son activité inhibitrice sur la sécrétion stimulée. En élargissant l'étude de la protéine SEPT4, nous avons découvert que celle-ci avait comme partenaire fonctionnel, la protéine Pinl, une enzyme qui catalyse l'isomérisation cis-trans du lien peptidique précédant une proline. bans ce contexte, nous avons démontré que l'interaction entre ces deux protéines reposait sur le domaine WW de Pinl, un type de domaine reconnaissant les motifs phosphoséryl-prolyl et phosphothréonyl-prolyl. Ce dernier résultat nous a conduit à examiner la phosphorylation de 5EPT4. Nous avons démontré que la partie N-terminale de SEPT4 était phosphorylée par la kinase Cdk5. La co¬expression de Cdk5 et de SEPT4 stimule la dégradation de SEPT4, indépendamment de la voie du protéasome. Ainsi, l'ensemble de nos observations fournissent l'évidence de l'engagement de la protéine SEPT4 dans la régulation de l'exocytose, et soutiennent le rôle de p53 dans le contrôle de l'exocytose, via SEPT4, ce qui constituerait un nouveau rôle fonctionnel pour ce gardien du génome. Summary: Cancer, which is responsible for a quarter of the deaths in Switzerland, exhibits a disordered cellular state, which itself, is the consequence of an altered state of genes. The most frequently altered gene in human cancer is p53. This gene encodes a transcription factor, implicated in the regulation of numerous genes involved in cell cycle, apoptosis or differentiation. Our laboratory has recently identified sixteen new genes whose expression is regulated by p53, amongst them septin 4, which is the subject of this thesis. The SEPT4 protein belongs to the septin family which is implicated in cytokinesis. In the present work, we have confirmed the regulation of sept4 expression by p53 in mouse tissues, and surprisingly, only one of the two sept4 promoters is regulated by p53. In addition, the immunohistologic approach enabled us to suppose a role of SEPT4 in exocytosis. This assumption was confirmed by the interaction of SEPT4 with syntaxin 1A, and by its inhibiting activity on stimulated secretion. By widening the analysis of SEPT4, we identified Pin1 as an interacting protein. Pin1 is an enzyme which catalyzes the cis-trans isomerization of the peptide bond preceding a proline residue. In this context, we showed that the interaction between these two proteins depends on the WW domain of Pin 1. This domain has been shown to function as a phosphoserine- or phosphothreonine¬binding module. This last result prompted us to examine phosphorylation of SEPT4. We demonstrated that the N-terminal portion of SEPT4 was phosphorylated by the Cdk5 kinase. The co-expression of Cdk5 with 5EPT4 stimulates SEPT4 degradation, independently of the proteasome pathway. Thus, these observations provide evidence for the engagement of SEPT4 in the regulation of exocytosis, and supports the role of p53 in the control of exocytosis, via SEPT4, which constitutes a new functional role for this guardian of the genome.

Crystal engineering studies: polymorphs and co-crystals

We review the key topics of one of the areas with the biggest impact of the last years in the chemical and pharmaceutical industry that is Crystal Engineering. The relevance of polymorphs and co-crystals from different points of view is been highlighted and broadly illustrated by means of several recent examples of studies carried out in this field. In addition, the most suitableinstrumental techniques and the intellectual property implications are reviewed.

Generic brands and product differentiation strategies

Generic or own brand products were initially only lesser expensive copies of the branded label alternative, but nowadays, pricing alone is not enough in order to survive in the Fast Moving Consumer Goods (FMCG) or Consumer Packaged Goods (CPG)markets. With this in mind manufacturers of generic brands have adapted to this rapidlygrowing niche by investing in design and marketing during the initial phase in order to be perceived as having a quality product comparable to that of the branded products. In addition, they have gone further ahead with a second phase and resorted to innovativeproduct differentiation strategies and even pure innovation in many cases. These strategies have granted generic brands constantly increasing market shares and a position of equals relative to national brands.Using previous analyses and case studies, this paper will provide conceptual and empirical evidence to explain the surprisingly fast growth and penetration of generic supermarket brands, which in their relatively short lifespan, have grown to rival the historical market leaders, the branded products. According to this analysis, the main conclusion is that the growth in generic brands can be explained not only by price competition, but also by the use of innovative product differentiation strategies.

Long-term impacts of forest harvesting related soil disturbance on log product yields and economic potential in a New Zealand forest

Abstract

WISE: Women in Science and Engineering, Fall 2006

Women in Science and Engineering (WISE) Program is to expand and improve educational and professional opportunities for women in all fields of science, technology, engineering and math (STEM) by facilitating individual, institutional, and social change.

WISE: Women in Science and Engineering, Spring 2007

Women in Science and Engineering (WISE) Program is to expand and improve educational and professional opportunities for women in all fields of science, technology, engineering and math (STEM) by facilitating individual, institutional, and social change.

WISE: Women in Science and Engineering, Spring 2009

Women in Science and Engineering (WISE) Program is to expand and improve educational and professional opportunities for women in all fields of science, technology, engineering and math (STEM) by facilitating individual, institutional, and social change.

WISE: Women in Science and Engineering, Winter 2007

Women in Science and Engineering (WISE) Program is to expand and improve educational and professional opportunities for women in all fields of science, technology, engineering and math (STEM) by facilitating individual, institutional, and social change.

WISE: Women in Science and Engineering, Winter 2007-2008

Women in Science and Engineering (WISE) Program is to expand and improve educational and professional opportunities for women in all fields of science, technology, engineering and math (STEM) by facilitating individual, institutional, and social change.

WISE: Women in Science and Engineering, Winter 2009

Women in Science and Engineering (WISE) Program is to expand and improve educational and professional opportunities for women in all fields of science, technology, engineering and math (STEM) by facilitating individual, institutional, and social change.