958 resultados para Organic domain (fine), edge-to-edge grain crushing
Resumo:
Magnetic M( T, H, P) and electrical transport.( T, H, P) measurements in a strong spin-lattice-charge coupled La(0.7)Ca(0.3)MnO(3) system have been conducted. The application of H and P leads to the formation of different magnetic domain structures in the vicinity and below the polaronic-to-ferromagnetic transition temperature. The charge mobility is more sensitive to the variation of the spatial wave function overlap between Mn(3+) eg and O(2-) 2p orbitals due to the applied compacting pressure rather than the relative spin orientation between neighbouring Mn ions when the magnetic field is applied. In spite of the presence of different magnetic domain structures due to the sample history, the effect of magnetic field and pressure is less pronounced at lower temperatures on electrical transport properties.
Resumo:
This study presents a comparison of the X-ray transmission through microsized and nanosized materials. For this purpose CuO nanoparticles, with 13.4 nm average grain size, and CuO microparticles, with a mean particle size of 56 mu m, were incorporated separately to beeswax in a concentration of 5%. Results show that the transmission through the above material plates with microsized and nanosized CuO was almost the same for X-ray beams generated at 60 and 102 kV tube voltages. However, for the radiation beams generated at 26 and 30 kV tube voltages the X-rays are more attenuated by the nanostructured CuO plates by a factor of at least 14%. Results suggest that the difference in the low energy range may be due to the higher number of particles/gram in the plates designed with CuO nanoparticles and due to the grain size effect on the X-ray transmission. (C) 2010 Elsevier Ltd. All rights reserved.
Resumo:
A novel poly(p-xylylene), PPX, derivative bearing phenyl side groups was electrochemically synthesized in 85% yield. The polymer, poly(2-phenyl-p-xylylene) (PPPX), presented a major fraction (88%) soluble in common organic solvents. It showed to be thermally resistant up to 140 degrees C. UV-VIS analysis revealed an Egap of similar to 3.0 eV. Gas sensors made from thin films of CSA doped PPPX deposited on interdigitated electrodes exhibited significant changes in electrical conductance upon exposure to five carbonyl compounds: acetaldehyde, propionaldehyde. benzaldehyde, acetone and butanone. Three-dimensional plots of relative response vs. time of half-response vs. time of half-recovery showed good discrimination between the five carbonyl Compounds tested. (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
This paper describes an automatic device for in situ and continuous monitoring of the ageing process occurring in natural and synthetic resins widely used in art and in the conservation and restoration of cultural artefacts. The results of tests carried out under accelerated ageing conditions are also presented. This easy-to-assemble palm-top device, essentially consists of oscillators based on quartz crystal resonators coated with films of the organic materials whose response to environmental stress is to be addressed. The device contains a microcontroller which selects at pre-defined time intervals the oscillators and records and stores their oscillation frequency. The ageing of the coatings, caused by the environmental stress and resulting in a shift in the oscillation frequency of the modified crystals, can be straightforwardly monitored in this way. The kinetics of this process reflects the level of risk damage associated with a specific microenvironment. In this case, natural and artificial resins, broadly employed in art and restoration of artistic and archaeological artefacts (dammar and Paraloid B72), were applied onto the crystals. The environmental stress was represented by visible and UV radiation, since the chosen materials are known to be photochemically active, to different extents. In the case of dammar, the results obtained are consistent with previous data obtained using a bench-top equipment by impedance analysis through discrete measurements and confirm that the ageing of this material is reflected in the gravimetric response of the modified quartz crystals. As for Paraloid B72, the outcome of the assays indicates that the resin is resistant to visible light, but is very sensitive to UV irradiation. The use of a continuous monitoring system, apart from being obviously more practical, is essential to identify short-term (i.e. reversible) events, like water vapour adsorption/desorption processes, and to highlight ageing trends or sudden changes of such trends. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
Single-phase perovskite structure Pb(1-x)Ba(x)TiO(3) thin films (x = 0.30, 0.50 and 0.70) were deposited on Pt/Ti/SiO(2)/Si substrates by the spin-coating technique. The dielectric study reveals that the thin films undergo a diffuse type ferroelectric phase transition, which shows a broad peak. An increase of the diffusivity degree with the increasing Barium contents was observed, and it was associated to a grain decrease in the studied composition range. The temperature dependence of the phonon frequencies was used to characterize the phase transition temperatures. Raman modes persist above tetragonal to cubic phase transition temperature, although all optical modes should be Raman inactive. The origin of these modes was interpreted in terms of breakdown of the local cubic symmetry by chemical disorder. The absence of a well-defined transition temperature and the presence of broad bands in some interval temperature above FE-PE phase transition temperature Suggested a diffuse type phase transition. This result corroborates the dielectric constant versus temperature data, which showed a broad ferroelectric phase transition in these thin films. The leakage Current density of the PBT thin films was studied at different temperatures and the data follow the Schottky emission model. Through this analysis the Schottky barrier height values 0.75, 0.53 and 0.34 eV were obtained to the PBT70, PBT50 and PBT30 thin films, respectively. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
This work investigates the solar heterogeneous photocatalytic degradation of three commercial acid dyes: Blue 9 (C.I. 42090), Red 51 (C.I. 45430), and Yellow 23 (C.I. 19140). TiO(2) P25 from Degussa was used as the photocatalyst. The dyes were completely degraded within 120 min of treatment in the following increasing order of removal rate: Blue 9 < Yellow 23 < Red 51. The photocatalytic color removal process was well described by a two-first-order in-series reaction, followed by another first-order reaction. Photolytic experiments showed that this process is quite inefficient and highly selective towards Red 51 only. The dyes` solution was completely decolorized and organic matter removals up to 99% were achieved with photocatalysis. The lack of selectivity and the possibility of using solar light to excite the photocatalyst are promising results regarding the feasibility of this technology.
Resumo:
The aim of this thesis is to examine the early vocabulary development of a sample of Swedish children in relation to parental input and early communicative skills. Three studies are situated in an overall description of early language development in children. The data analyzed in the thesis was collected within a larger project at Stockholm University (SPRINT- “Effects of enhanced parental input on young children’s vocabulary development and subsequent literacy development” [VR 2008-5094]). Data analysis was based on parental report via SECDI, the Swedish version of the MacArthur-Bates Communicative Development Inventories, and audio recordings. One study examined parental verbal interaction characteristics in three groups of children with varying vocabulary size at 18 months. The stability of vocabulary development at 18 and 24 months was investigated in a larger study, with focus on children’s vocabulary composition and grammatical abilities. The third study examined interrelations among early gestures, receptive and productive vocabulary, and grammar measured with M3L, i.e. three longest utterances, from 12 to 30 months. Overall results of the thesis highlight the importance of early language development. Variability in different characteristics in parental input is associated with variability in child vocabulary size. Children with large early vocabularies exhibit the most stability in vocabulary composition and the earliest grammatical development. Children’s vocabulary composition may reflect individual stylistic variation. Use of early gestures is associated differentially with receptive and productive vocabulary. Results of the thesis have implications for parents, child- and healthcare personnel, as well as researchers and educational practitioners. The results underscore the importance of high quality in adult-child interaction, with rich input fine-tuned to children’s developmental levels and age, together with high awareness of early language development.
Resumo:
Agent-oriented software engineering and software product lines are two promising software engineering techniques. Recent research work has been exploring their integration, namely multi-agent systems product lines (MAS-PLs), to promote reuse and variability management in the context of complex software systems. However, current product derivation approaches do not provide specific mechanisms to deal with MAS-PLs. This is essential because they typically encompass several concerns (e.g., trust, coordination, transaction, state persistence) that are constructed on the basis of heterogeneous technologies (e.g., object-oriented frameworks and platforms). In this paper, we propose the use of multi-level models to support the configuration knowledge specification and automatic product derivation of MAS-PLs. Our approach provides an agent-specific architecture model that uses abstractions and instantiation rules that are relevant to this application domain. In order to evaluate the feasibility and effectiveness of the proposed approach, we have implemented it as an extension of an existing product derivation tool, called GenArch. The approach has also been evaluated through the automatic instantiation of two MAS-PLs, demonstrating its potential and benefits to product derivation and configuration knowledge specification.
Resumo:
o presente trabalho é um estudo exploratório a respeito da síntese de filmes de diamante via deposiçãoquímica a vapor (CVD) sobre alguns substratos cerâmicos: diboreto de titânio (TiB2), ítria (Y20a), zircão (ZrSi04), zircônia parcialmente e totalmente estabilizada com ítria (Zr02), pirofilita ( Al2Si4OlO(OHh), .alumina (Al2Oa) e nitreto de boro hexagonal (h-BN). Estes substratos foram produzidos, em sua maioria, a partir da sinterização de pós micrométricos em altas temperaturas. Além do estudo em relação a possíveis candidatos alternativos ao tradicional silício para o crescimento de filmes auto-sustentáveis, procuramos encontrar substratos onde o filme aderisse bem e cujas propriedades tribológicas pudessem ser melhoradas com o recobrimento com filme de diamante.Dentre os materiais selecionados, constatamos que a topografia da superfície relacionada à densidade de contornos de grão, desempenha um papel relevante na nucleação do diamante. Além disso, os materiais que favorecem a formação de carbonetos conduziram a melhores resultados na nucleação e crescimento do filme, indicando que a ação da atmosfera reativa do CVD com o substrato também contribui decisivamente para o processo de nucleação. A partir dos resultados obtidos, concluímos que a aderência do filme de diamante ao zircão é excelente, assim como a qualidade do filme, o que pode serexplorado convenientemente caso as propriedades mecânicas do sinterizado de zircão sejam adequadas. No caso da zircônia parcialmente estabilizada, os resultados obtidos foram surpreendentes e este material poderia substituir o convencional substrato de silício para a deposição de filmes auto-sustentados de diamante, com inúmeras vantagens, dentre elas o fato de ser reutilizável e de não ser necessário ataque com ácidos para remoção do substrato, o que evita a geração de resíduos químicos.
Resumo:
o comportamento do homem está influenciado por vários fatores, dentre eles as necessidades básicas, a razão, o coração e a consciência. Para modificar o comportamento do homem com vistas a um comportamento mais cooperativo, faz-se necessário agir sobre algum desses fatores. Do ponto de vista ético o fator que deve ser trabalhado é a consciência, que permitiria o surgimento da estrutura organizacional orgânica. A estrutura orgânica permitiria às organizações, ao Estado e à sociedade, ter um relacionamento mais adequado com uma realidade social, universal e cósmica que se revela harmônica em seus princípios. A estrutura orgânica organizacional parte das propriedades da metáfora orgânica, presente em qualquer sistema orgânico (biológico, atômico e cósmico), e surge a partir dos seguintes pressupostos: a realidade pode ser representada como uma estrutura em rede orgânica, e o comportamento das pessoas vem determinado pelo nível de consciência. A estrutura orgânica possui os princípios de Autopoiesis e do Holograma, e tem uma série de propriedades aplicáveis em nível organizacional, tais como adaptação, evolução, flexibilidade e homeostase. A sociedade orgânica viria modelada pelos princípios e propriedades da estrutura orgânica, que induziriam o surgimento de comportamentos cooperativos e solidários dentro das instituições sociais, sobretudo aqueles relacionados com a organização do trabalho e a organização da economia. Adicionalmente, o paradigma orgânico conduziria ao estabelecimento das comunidades orgânicas. O Estado orgânico surgiria como decorrência de uma situação em que, o paradigma burocrático revelando-se inadequado para seu funcionamento, permitiria sua organização sob o paradigma orgânico. A substituição do paradigma organizacional burocrático-mecanicista vigente pelo paradigma orgânico, ocorreria de acordo com uma das seguintes alternativas: a) um processo intencional de mudanças minimalistas intercalado com ações radicais pontuais; ou b) uma situação de crise, em decorrência do impedimento do fluxo de mudanças naturais não implementadas. Propõe-se, assim, o paradigma orgânico como ponto de partida indispensável a mudanças conducentes ao bem estar individual e coletivo.
Resumo:
The focus of this thesis is to discuss the development and modeling of an interface architecture to be employed for interfacing analog signals in mixed-signal SOC. We claim that the approach that is going to be presented is able to achieve wide frequency range, and covers a large range of applications with constant performance, allied to digital configuration compatibility. Our primary assumptions are to use a fixed analog block and to promote application configurability in the digital domain, which leads to a mixed-signal interface. The use of a fixed analog block avoids the performance loss common to configurable analog blocks. The usage of configurability on the digital domain makes possible the use of all existing tools for high level design, simulation and synthesis to implement the target application, with very good performance prediction. The proposed approach utilizes the concept of frequency translation (mixing) of the input signal followed by its conversion to the ΣΔ domain, which makes possible the use of a fairly constant analog block, and also, a uniform treatment of input signal from DC to high frequencies. The programmability is performed in the ΣΔ digital domain where performance can be closely achieved according to application specification. The interface performance theoretical and simulation model are developed for design space exploration and for physical design support. Two prototypes are built and characterized to validate the proposed model and to implement some application examples. The usage of this interface as a multi-band parametric ADC and as a two channels analog multiplier and adder are shown. The multi-channel analog interface architecture is also presented. The characterization measurements support the main advantages of the approach proposed.
Resumo:
Fusões e aquisições são um fenômeno relevante na economia e estão se tornando cada vez mais presentes no Brasil também. Entre os diferentes setores econômicos nos quais a estratégia de crescimento aquisitivo tem sido implementadas, a educação superior privada merece destaque, não apenas pela frequência de transações, mas também pelo porte de algumas delas, colocando as empresas líderes do mercado brasileiro entre as maiores instituições do mundo. O presente trabalho objetiva entender por que essas empresa têm adotado tal estratégia, ao invés de simplesmente se basearem no crescimento orgânico. A tentativa de responder a essa questão levou à proposta de uma hipótese que sugere que existem motivações econômicas para a ocorrência deste fato. Em outras palavras, a hipótese que o trabalho busca testar é que existem sinergias nas transações realizadas no setor de educação superior no Brasil, bem como que estas sinergias têm sido convertidas em ganhos econômicos para as empresas adquirentes e para os seus acionistas. Para tanto, o presente trabalho primeiramente apresenta uma revisão da literatura do tema de fusões e aquisição e também uma visão sobre o setor brasileiro de educação superior, incluindo sua evolução, regulamentação e outras informações relevantes para apoiar um entendimento mais profundo sobre o fenômeno estudado. Em seguida, baseando-se na metodologia proposta, o trabalho foca no teste de sua hipótese, através da identificação das sinergias específicas presentes no setor e nas empresas selecionadas (Anhanguera, Estácio e Kroton) e da análise de como estas sinergias estão sendo traduzidas em seus resultados econômicos. Finalmente, com base nas evidências geradas por tais discussões, são providas conclusões relativas à veracidade da hipótese.
Resumo:
A propaganda vem se difundindo de formas as mais variadas há muito tempo. Não é incomum, entretanto, que em vez de ser usada para transmitir informações e características do que é anunciado, haja empresas que fazem uso de ludíbrio e engodo em suas peças publicitárias a fim de persuadir os potenciais consumidores de uma maneira condenável em termos éticos. Esta tese analisa a reação dos consumidores quando expostos a propagandas enganosas, comparando-a à daqueles que foram expostos a propagandas sem engodo, por meio de experimentos em que 359 indivíduos foram pesquisados e hipóteses testadas, com testes de média entre duas populações e o uso da Escala de Wells, analisando ainda os argumentos de publicitários e de um representante do CONAR a respeito da atuação dos profissionais desta área. Os resultados indicam que os publicitários não se baseiam em um código de conduta para a criação de propagandas visando ao respeito ao cliente; eles indicam que se algo lesivo ou enganoso tiver sido divulgado, isto é devido ao fato de seu cliente ter fornecido um briefing inadequado. Não há, aparentemente, questionamentos dos publicitários sobre a veracidade daquilo que o cliente lhes transmite ao solicitar a concepção de uma propaganda. Com relação aos consumidores, percebe-se que a maioria não conhece as obrigações do CONAR nem leu o Código de Defesa do Consumidor. Eles creem que empresas com maior reputação apresentam mais credibilidade em relação ao que transmitem em suas propagandas, e confundem artifícios legais com enganosos. A maioria dos consumidores que já foi enganada por uma propaganda nunca agiu contra a empresa responsável após ter percebido o que ocorrera. Os principais artifícios usados em propagandas foram testados, tendo sido possível perceber que, ainda que não interfiram em grande magnitude na intenção de compra, são responsáveis por confundir em diversas situações os consumidores, como observado nos casos do uso das expressões “apenas”, “a partir de” e no uso de letras miúdas para “fornecer” informações. As políticas públicas propostas servem para organizar os achados desta tese e o que já foi publicado na literatura sobre o tema, visando a recomendar formas de se educar os consumidores, de se agir em prol de uma sociedade em que propagandas enganosas não sejam algo tão corriqueiro e de punir e controlar aquilo que é divulgado em mensagens que a cada momento atingem uma enorme quantidade de indivíduos, influenciando suas decisões de compra.
Resumo:
Há uma preocupação crescente sobre a necessidade de produção e consumo de alimentos mais saudáveis, sem uso de agrotóxicos nem fertilizantes químicos. Neste contexto se insere a prática da agricultura orgânica que, contudo, apresenta resultados ainda pouco avaliados. Assim, pretendeu-se, nesta pesquisa diagnosticar a produção orgânica na região citrícola do Vale do Rio Caí, no Rio Grande do Sul. Inicialmente foram selecionadas propriedades de oito agricultores, todas já convertidas ao sistema orgânico de produção há pelo menos cinco anos. Para tanto foram aplicadas entrevistas semi-estruturadas junto às unidades familiares, visando diagnosticar os aspectos sociais, econômicos e técnicoambientais. Os agricultores orgânicos mostram-se satisfeitos com o sistema orgânico de produção, que de maneira geral proporciona boas produtividades com custos de produção menores do que no sistema convencional de cultivo. Os agricultores que se dedicam ao sistema orgânico de produção revelam bom conhecimento sobre o meio ambiente, plantas, solos e processos agroecológicos, aspectos políticos, econômicos e sociais, adquiridos através da participação em cursos, palestras, congressos, dias de campo, treinamentos, e através das reuniões e assembléias da Cooperativa ECOCITRUS. A constante troca de experiências entre os agricultores orgânicos tem contribuído na melhoria da qualificação técnica dos produtores, além de melhor conscientizá-los nos aspectos políticos, econômicos e sociais. A participação dos produtores na ECOCITRUS tem proporcionado melhor organização dos mesmos, contribuindo na viabilização da produção orgânica, inclusive com vantagens econômicocomerciais, pela obtenção de insumos orgânicos, venda da produção e estímulo ao beneficiamento da produção, visando agregar renda à propriedade.
Resumo:
Untreated effluents that reach surface water affect the aquatic life and humans. This study aimed to evaluate the wastewater s toxicity (municipal, industrial and shrimp pond effluents) released in the Estuarine Complex of Jundiaí- Potengi, Natal/RN, through chronic quantitative e qualitative toxicity tests using the test organism Mysidopsis Juniae, CRUSTACEA, MYSIDACEA (Silva, 1979). For this, a new methodology for viewing chronic effects on organisms of M. juniae was used (only renewal), based on another existing methodology to another testorganism very similar to M. Juniae, the M. Bahia (daily renewal).Toxicity tests 7 days duration were used for detecting effects on the survival and fecundity in M. juniae. Lethal Concentration 50% (LC50%) was determined by the Trimmed Spearman-Karber; Inhibition Concentration 50% (IC50%) in fecundity was determined by Linear Interpolation. ANOVA (One Way) tests (p = 0.05) were used to determinate the No Observed Effect Concentration (NOEC) and Low Observed Effect Concentration (LOEC). Effluents flows were measured and the toxic load of the effluents was estimated. Multivariate analysis - Principal Component Analysis (PCA) and Correspondence Analysis (CA) - identified the physic-chemical parameters better explain the patterns of toxicity found in survival and fecundity of M. juniae. We verified the feasibility of applying the only renewal system in chronic tests with M. Juniae. Most efluentes proved toxic on the survival and fecundity of M. Juniae, except for some shrimp pond effluents. The most toxic effluent was ETE Lagoa Aerada (LC50, 6.24%; IC50, 4.82%), ETE Quintas (LC50, 5.85%), Giselda Trigueiro Hospital (LC50, 2.05%), CLAN (LC50, 2.14%) and COTEMINAS (LC50, IC50 and 38.51%, 6.94%). The greatest toxic load was originated from ETE inefficient high flow effluents, textile effluents and CLAN. The organic load was related to the toxic effects of wastewater and hospital effluents in survival of M. Juniae, as well as heavy metals, total residual chlorine and phenols. In industrial effluents was found relationship between toxicity and organic load, phenols, oils and greases and benzene. The effects on fertility were related, in turn, with chlorine and heavy metals. Toxicity tests using other organisms of different trophic levels, as well as analysis of sediment toxicity are recommended to confirm the patterns found with M. Juniae. However, the results indicate the necessity for implementation and improvement of sewage treatment systems affluent to the Potengi s estuary