Radiographic adenoid evaluation: proposal of an objective parameter

Objective The objective of the present study was to evaluate current radiographic parameters designed to investigate adenoid hypertrophy and nasopharyngeal obstruction, and to present an alternative radiographic assessment method. Materials and Methods In order to do so, children (4 to14 years old) who presented with nasal obstruction or oral breathing complaints were submitted to cavum radiographic examination. One hundred and twenty records were evaluated according to quantitative radiographic parameters, and data were correlated with a gold-standard videonasopharyngoscopic study, in relation to the percentage of choanal obstruction. Subsequently, a regression analysis was performed in order to create an original model so the percentage of the choanal obstruction could be predicted. Results The quantitative parameters demonstrated moderate, if not weak correlation with the real percentage of choanal obstruction. The regression model (110.119*A/N) demonstrated a satisfactory ability to “predict” the actual percentage of choanal obstruction. Conclusion Since current adenoid quantitative radiographic parameters present limitations, the model presented by the present study might be considered as an alternative assessment method in cases where videonasopharyngoscopic evaluation is unavailable.

Estimating extreme value cumulative distribution functions using bias-corrected kernel approaches

We propose a new kernel estimation of the cumulative distribution function based on transformation and on bias reducing techniques. We derive the optimal bandwidth that minimises the asymptotic integrated mean squared error. The simulation results show that our proposed kernel estimation improves alternative approaches when the variable has an extreme value distribution with heavy tail and the sample size is small.

Ohutlevyosien valmistuskustannukset ja kansainvälinen hankintastrategia

Työn tarkoituksena on kehittää hankinnan päätöksentekoa tukeva ohutlevyosien valmistuskustannusten laskentamenetelmä toimintolaskentaan pohjautuen. Laskentamenetelmä koostuu valmistukseen kuluvan ajan laskennassa käytettävistä funktioista sekä konetuntihinnoista. Hankintatoimen päätöksistä käsitellään toimittajanvalintaa, jossa yhtenä vaihtoehtona on hankkiminen Kiinasta. Toimittajanvalinnan kriteereitä ovat tällöin hankintahinnan lisäksi kuljetuskustannukset, laatu sekä toimitusvarmuus. Myös kansainvälisen hankinnan Kiinasta erityispiirteitä käsitellään. Hankkiminen Kiinasta koetaan vielä melko ongelmallisena etenkin laadun ja toimitusvarmuuden osalta. Erityisen huomioitavaa on, että hankintahintojen alhaisuus on osakohtaista. Suurin riski hankinnan kannattavuudelle aiheutuu valuuttakursseista. Osto-organisaation yhteistyötä alihankkijoiden sekä muiden osastojen kanssa parantamalla voidaan välttää hankittavien ohutlevyosien laatuongelmia. Suomalaisten alihankkijoiden kanssa kustannuslaskentamallia avoimeen hinnoitteluun soveltamalla hankintakustannuksia voidaan alentaa.

CFD simulation of complex phenomena containing suspensions and flow throughporous media

There is an increasing reliance on computers to solve complex engineering problems. This is because computers, in addition to supporting the development and implementation of adequate and clear models, can especially minimize the financial support required. The ability of computers to perform complex calculations at high speed has enabled the creation of highly complex systems to model real-world phenomena. The complexity of the fluid dynamics problem makes it difficult or impossible to solve equations of an object in a flow exactly. Approximate solutions can be obtained by construction and measurement of prototypes placed in a flow, or by use of a numerical simulation. Since usage of prototypes can be prohibitively time-consuming and expensive, many have turned to simulations to provide insight during the engineering process. In this case the simulation setup and parameters can be altered much more easily than one could with a real-world experiment. The objective of this research work is to develop numerical models for different suspensions (fiber suspensions, blood flow through microvessels and branching geometries, and magnetic fluids), and also fluid flow through porous media. The models will have merit as a scientific tool and will also have practical application in industries. Most of the numerical simulations were done by the commercial software, Fluent, and user defined functions were added to apply a multiscale method and magnetic field. The results from simulation of fiber suspension can elucidate the physics behind the break up of a fiber floc, opening the possibility for developing a meaningful numerical model of the fiber flow. The simulation of blood movement from an arteriole through a venule via a capillary showed that the model based on VOF can successfully predict the deformation and flow of RBCs in an arteriole. Furthermore, the result corresponds to the experimental observation illustrates that the RBC is deformed during the movement. The concluding remarks presented, provide a correct methodology and a mathematical and numerical framework for the simulation of blood flows in branching. Analysis of ferrofluids simulations indicate that the magnetic Soret effect can be even higher than the conventional one and its strength depends on the strength of magnetic field, confirmed experimentally by Völker and Odenbach. It was also shown that when a magnetic field is perpendicular to the temperature gradient, there will be additional increase in the heat transfer compared to the cases where the magnetic field is parallel to the temperature gradient. In addition, the statistical evaluation (Taguchi technique) on magnetic fluids showed that the temperature and initial concentration of the magnetic phase exert the maximum and minimum contribution to the thermodiffusion, respectively. In the simulation of flow through porous media, dimensionless pressure drop was studied at different Reynolds numbers, based on pore permeability and interstitial fluid velocity. The obtained results agreed well with the correlation of Macdonald et al. (1979) for the range of actual flow Reynolds studied. Furthermore, calculated results for the dispersion coefficients in the cylinder geometry were found to be in agreement with those of Seymour and Callaghan.

NURBS toolbox for Matlab

NURBS are widely used parametric approximation curves or surfaces. NURBS can be applied to the many applications. Examples of these applications are some computeraided design applications and some medical applications. Use of NURBS is very intuitive. The objective of this work was to implement the NURBS toolbox in the Matlab environment. Matlab is a program for many kinds of computational purposes. Matlab is also a programming language. NURBS toolbox implemented in this work offers a user an opportunity to use functions of this toolbox as parts of the user’s own programs. Current version of NURBS toolbox includes functions for NURBS curve and surface evaluation. The toolbox is designed such, that it allows extensions and enhancements in the future.

Identifying strategies for mitigating the global warming impact of the EU-25 economy using a multi-objective input-output approach

Global warming mitigation has recently become a priority worldwide. A large body of literature dealing with energy related problems has focused on reducing greenhouse gases emissions at an engineering scale. In contrast, the minimization of climate change at a wider macroeconomic level has so far received much less attention. We investigate here the issue of how to mitigate global warming by performing changes in an economy. To this end, we make use of a systematic tool that combines three methods: linear programming, environmentally extended input output models, and life cycle assessment principles. The problem of identifying key economic sectors that contribute significantly to global warming is posed in mathematical terms as a bi criteria linear program that seeks to optimize simultaneously the total economic output and the total life cycle CO2 emissions. We have applied this approach to the European Union economy, finding that significant reductions in global warming potential can be attained by regulating specific economic sectors. Our tool is intended to aid policymakers in the design of more effective public policies for achieving the environmental and economic targets sought.

Enhancement of R&D project management system

Stora Enso has research centres in Finland, Sweden and Germany. The research centres use PIMS as a research project invoicing and monitoring system. Possible reorganization and new financing model for R&D functions have been considered and the project management system should be developed to support the new operation model. The objective of this thesis is to find a model for R&D project management, and to present the project management system of Stora Enso, and to discuss if the current system could be developed to respond to the new needs or should it be replaced with another system. The theoretical part of the study describes challenges in R&D project management, and presents different project characteristics, and methods for managing R&D project portfolio. It is also described how the project management system can support project monitoring and controlling, and how inter-project learning can be enhanced. The empirical part of the study presents the current project management system of Stora Enso and how the system should be developed to support Stora Enso’s R&D functions better. In conclusion, it is stated that there is no relevant reason to replace PIMS with another system, because PIMS can be developed to support R&D project management better with a hybrid system. It is also suggested that the new financing model should not be implemented before more comprehensive analysis of its effects is conducted.

Mobile Subscription Acquisition and Retention Costs - An Actvity-Based Model

The objective of this master’s thesis was to develop a model for mobile subscription acquisition cost, SAC, and mobile subscription retention cost, SRC, by applying activity-based cost accounting principles. The thesis was conducted as a case study for a telecommunication company operating on the Finnish telecommunication market. In addition to activity-based cost accounting there were other theories studied and applied in order to establish a theory framework for this thesis. The concepts of acquisition and retention were explored in a broader context with the concepts of customer satisfaction, loyalty and profitability and eventually customer relationship management to understand the background and meaning of the theme of this thesis. The utilization of SAC and SRC information is discussed through the theories of decision making and activity-based management. Also, the present state and future needs of SAC and SRC information usage at the case company as well as the functions of the company were examined by interviewing some members of the company personnel. With the help of these theories and methods it was aimed at finding out both the theory-based and practical factors which affect the structure of the model. During the thesis study it was confirmed that the existing SAC and SRC model of the case company should be used as the basis in developing the activity-based model. As a result the indirect costs of the old model were transformed into activities and the direct costs were continued to be allocated directly to acquisition of new subscriptions and retention of old subscriptions. The refined model will enable managing the subscription acquisition, retention and the related costs better through the activity information. During the interviews it was found out that the SAC and SRC information is also used in performance measurement and operational and strategic planning. SAC and SRC are not fully absorbed costs and it was concluded that the model serves best as a source of indicative cost information. This thesis does not include calculating costs. Instead, the refined model together with both the theory-based and interview findings concerning the utilization of the information produced by the model will serve as a framework for the possible future development aiming at completing the model.

Strategia ja menestystekijät projektiliiketoiminnassa

Projektit ovat keskeinen osa usean yrityksen päivittäistä toimintaa. Niiden avulla voidaan toteuttaa organisaatioiden sisäisiä kehityshankkeita tai yhtä hyvin asiakastoimituksia tuotteiden ja palveluiden muodossa. Tämän tutkimustyön tavoitteena on kehittää asiakastoimitusprojektien projektiliiketoimintamallia strategian näkökulmasta tapaustutkimuksen avulla. Lisäksi tutkimustyön tavoitteena on määrittää projektiliiketoiminnan menestystekijät asiakastoimitusprojektien yhteydessä ja muodostaa niiden mukainen suorituskykymittariston perusta. Tutkimus toteutettiin valitun yrityksen projektiliiketoimintamalliin perehtymällä. Ensimmäisessä vaiheessa esitellään yritystä ja sen toimintaa. Yrityksen toimintaa kuvataan viitekehyksen avulla, joka on valittu teoriakatsauksen perusteella. Teoriakatsaus käsittelee projektiliiketoimintaa, strategiaa projektiliiketoiminnassa sekä suorituskyvynjohtamisen teoriaa. Keskeisenä tuloksena tutkimuksen perusteella muodostettiin ehdotus yrityksen projektiliiketoiminnan tavoitetilasta, ydintoiminnoista, menestystekijöistä sekä strategiasta. Ehdotuksessa kuvataan projektiliiketoiminnan suorituskyvynjohtamisen peruselementit, jotka muodostavat perustan suorituskyvyn mittaamiselle kohdeorganisaatiossa.

On the Connectivity of the Julia sets of meromorphic functions

We prove that every transcendental meromorphic map $f$ with disconnected Julia set has a weakly repelling fixed point. This implies that the Julia set of Newton's method for finding zeroes of an entire map is connected. Moreover, extending a result of Cowen for holomorphic self-maps of the disc, we show the existence of absorbing domains for holomorphic self-maps of hyperbolic regions, whose iterates tend to a boundary point. In particular, the results imply that periodic Baker domains of Newton's method for entire maps are simply connected, which solves a well-known open question.

Competence Development and Capacity Building of Sawmill Enterprises in Kenya – A Human Resources Development Approach

The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.

Monivaiheisen höyryturbiinin optimointi

Tässä diplomityössä optimoitiin nelivaiheinen 1 MWe höyryturbiinin prototyyppimalli evoluutioalgoritmien avulla sekä tutkittiin optimoinnista saatuja kustannushyötyjä. Optimoinnissa käytettiin DE – algoritmia. Optimointi saatiin toimimaan, mutta optimoinnissa käytetyn laskentasovelluksen (semiempiirisiin yhtälöihin perustuvat mallit) luonteesta johtuen optimoinnin tarkkuus CFD – laskennalla suoritettuun tarkastusmallinnukseen verrattuna oli jonkin verran toivottua pienempi. Tulosten em. epätarkkuus olisi tuskin ollut vältettävissä, sillä ongelma johtui puoliempiirisiin laskentamalleihin liittyvistä lähtöoletusongelmista sekä epävarmuudesta sovitteiden absoluuttisista pätevyysalueista. Optimoinnin onnistumisen kannalta tällainen algebrallinen mallinnus oli kuitenkin välttämätöntä, koska esim. CFD-laskentaa ei olisi mitenkään voitu tehdä jokaisella optimointiaskeleella. Optimoinnin aikana ongelmia esiintyi silti konetehojen riittävyydessä sekä sellaisen sopivan rankaisumallin löytämisessä, joka pitäisi algoritmin matemaattisesti sallitulla alueella, muttei rajoittaisi liikaa optimoinnin edistymistä. Loput ongelmat johtuivat sovelluksen uutuudesta sekä täsmällisyysongelmista sovitteiden pätevyysalueiden käsittelyssä. Vaikka optimoinnista saatujen tulosten tarkkuus ei ollut aivan tavoitteen mukainen, oli niillä kuitenkin koneensuunnittelua edullisesti ohjaava vaikutus. DE – algoritmin avulla suoritetulla optimoinnilla saatiin turbiinista noin 2,2 % enemmän tehoja, joka tarkoittaa noin 15 000 € konekohtaista kustannushyötyä. Tämä on yritykselle erittäin merkittävä konekohtainen kustannushyöty. Loppujen lopuksi voitaneen sanoa, etteivät evoluutioalgoritmit olleet parhaimmillaan prototyyppituotteen optimoinnissa. Evoluutioalgoritmeilla teknisten laitteiden optimoinnissa piilee valtavasti mahdollisuuksia, mutta se vaatii kypsän sovelluskohteen, joka tunnetaan jo entuudestaan erinomaisesti tai on yksinkertainen ja aukottomasti laskettavissa.

Analyzing Carbon Trade Permits in Optimization Framework

The threats caused by global warming motivate different stake holders to deal with and control them. This Master's thesis focuses on analyzing carbon trade permits in optimization framework. The studied model determines optimal emission and uncertainty levels which minimize the total cost. Research questions are formulated and answered by using different optimization tools. The model is developed and calibrated by using available consistent data in the area of carbon emission technology and control. Data and some basic modeling assumptions were extracted from reports and existing literatures. The data collected from the countries in the Kyoto treaty are used to estimate the cost functions. Theory and methods of constrained optimization are briefly presented. A two-level optimization problem (individual and between the parties) is analyzed by using several optimization methods. The combined cost optimization between the parties leads into multivariate model and calls for advanced techniques. Lagrangian, Sequential Quadratic Programming and Differential Evolution (DE) algorithm are referred to. The role of inherent measurement uncertainty in the monitoring of emissions is discussed. We briefly investigate an approach where emission uncertainty would be described in stochastic framework. MATLAB software has been used to provide visualizations including the relationship between decision variables and objective function values. Interpretations in the context of carbon trading were briefly presented. Suggestions for future work are given in stochastic modeling, emission trading and coupled analysis of energy prices and carbon permits.

Ultrafine grinding of FGD and phosphogypsum with an attrition bead mill and a jet mill : optimisation and modelling of grinding and mill comparison

Fine powders of minerals are used commonly in the paper and paint industry, and for ceramics. Research for utilizing of different waste materials in these applications is environmentally important. In this work, the ultrafine grinding of two waste gypsum materials, namely FGD (Flue Gas Desulphurisation) gypsum and phosphogypsum from a phosphoric acid plant, with the attrition bead mill and with the jet mill has been studied. The ' objective of this research was to test the suitability of the attrition bead mill and of the jet mill to produce gypsum powders with a particle size of a few microns. The grinding conditions were optimised by studying the influences of different operational grinding parameters on the grinding rate and on the energy consumption of the process in order to achieve a product fineness such as that required in the paper industry with as low energy consumption as possible. Based on experimental results, the most influential parameters in the attrition grinding were found to be the bead size, the stirrer type, and the stirring speed. The best conditions, based on the product fineness and specific energy consumption of grinding, for the attrition grinding process is to grind the material with small grinding beads and a high rotational speed of the stirrer. Also, by using some suitable grinding additive, a finer product is achieved with a lower energy consumption. In jet mill grinding the most influential parameters were the feed rate, the volumetric flow rate of the grinding air, and the height of the internal classification tube. The optimised condition for the jet is to grind with a small feed rate and with a large rate of volumetric flow rate of grinding air when the inside tube is low. The finer product with a larger rate of production was achieved with the attrition bead mill than with the jet mill, thus the attrition grinding is better for the ultrafine grinding of gypsum than the jet grinding. Finally the suitability of the population balance model for simulation of grinding processes has been studied with different S , B , and C functions. A new S function for the modelling of an attrition mill and a new C function for the modelling of a jet mill were developed. The suitability of the selected models with the developed grinding functions was tested by curve fitting the particle size distributions of the grinding products and then comparing the fitted size distributions to the measured particle sizes. According to the simulation results, the models are suitable for the estimation and simulation of the studied grinding processes.