High-voltage electrophoretic deposition of preferentially oriented films from multiferroic YMn2O5 nanopowders

Processing of the YMn2O5 powder is very challenging, since it decomposes to YMnO3 and Mn3O4 at temperatures close to 1180 °C, while samples consolidation commonly demands high temperatures. The main goal of this work is to investigate a possibility to prepare thick films of YMn2O5, since their deposition generally requires significantly lower temperatures. Multiferroic YMn 2O5 was synthesized by the hydrothermal method from Y(CH3COO)3·xH2O, Mn(CH 3COO)2·4H2O and KMnO4 precursors. XRD, FE-SEM and TEM analysis showed that the obtained powder was monophasic, with orthorhombic crystal structure and columnar particle shape with mean diameter and length of around 20 and 50 nm, respectively. The obtained powder was suspended in isopropyl alcohol with addition of appropriate binder and deflocculant. This suspension was used for electrophoretic deposition of YMn2O5 thick films under the high-voltage conditions and electric fields ranging from 250 to 2125 V/cm. The films obtained at 1000 V/cm and higher electric fields showed good adhesion, particle packing, homogeneity and very low porosity. It was shown that the deposition in extremely high electric fields (KC=2125 V/cm) can influence the crystal orientation of the films, resulting in formation of preferentially oriented films. © 2012 Elsevier Ltd and Techna Group S.r.l.

Photoelastic analysis of the influence of residual ridge inclination in conjugated class i mandibular prostheses with different attachment systems

Objectives: The aim of this study was to evaluate the stress distribution in mandibular free-end removable partial dentures (RPD) associated with FPD in the abutment teeth considering different inclinations of the residual ridge: (1) horizontal and (2) distal descending ridges and two designs of free-end RPD with different attachment systems were tested: (1) clasp and (2) system ERA. Methods. Axial loads (100 N) were applied on the teeth of the RPD. The images were recorded and the stress distribution was evaluated through photoelastic fringes. Results. In general, the distal descending ridge presented more photoelastic fringes in the region of the roots of the abutment teeth while the horizontal ridge exhibited higher compression in the base of the prosthesis. In the horizontal ridge, the denture with clasp presented more favourable stress distribution than the denture with the system ERA. In the distal descending ridge, the denture with the system ERA relieved the region of the abutment teeth and overloaded the residual ridge. Conclusion: The horizontal ridge presented more favourable performance; the dentures with clasp exhibited better performance for both ridges evaluated; the denture with the system ERA presented better results in the distal descending ridge. © 2013 Informa Healthcare.

Study of Brazilian commercial Oriented Strand Board panels using stress wave

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Structural and electrical properties of LaNiO3 thin films grown on (100) and (001) oriented SrLaAlO4 substrates by chemical solution deposition method

LaNiO3 thin films were deposited on SrLaAlO4 (1 0 0) and SrLaAlO4 (0 0 1) single crystal substrates by a chemical solution deposition method and heat-treated in oxygen atmosphere at 700° C in tube oven. Structural, morphological, and electrical properties of the LaNiO 3 thin films were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), and electrical resistivity as temperature function (Hall measurements). The X-ray diffraction data indicated good crystallinity and a structural preferential orientation. The LaNiO3 thin films have a very flat surface and no droplet was found on their surfaces. Samples of LaNiO3 grown onto (1 0 0) and (0 0 1) oriented SrLaAlO4 single crystal substrates reveled average grain size by AFM approximately 15-30 nm and 20-35 nm, respectively. Transport characteristics observed were clearly dependent upon the substrate orientation which exhibited a metal-to-insulator transition. The underlying mechanism is a result of competition between the mobility edge and the Fermi energy through the occupation of electron states which in turn is controlled by the disorder level induced by different growth surfaces. © 2013 Elsevier Ltd and Techna Group S.r.l.

Policy oriented analysis of Latinamerican urban poverty: an example of three key factors

Includes bibliography

Latin America: population dynamics analysis oriented toward the health services sector, years 1950-2000

Includes bibliography

Processo de attachment, densidade de raios e a ocorrência de flashover em linhas de transmissão de eletricidade

Esta tese refere-se ao uso de modelos de attachment de lideres (Leader Progression Model – LPM) para estimativa da distancia de salto, que, junto com dados de densidade de raios como coletado pelo sistema de detecção de raios do SIPAM, são usados para estimar a taxa de flashover em linhas de transmissão de eletricidade na Amazônia. O modelo de progressão de líder desenvolvido nesta tese é denominado ModSalto, que, para estimar a distancia de salto: 1- integra a densidade linear de cargas elétricas devida ao líder, proporcional a prospectiva corrente de primeira descarga (1º stroke) Ip, para determinar o campo elétrico produzido pelo líder descendente na estrutura sob estudo (para-raios, arestas, condutores, etc.); 2 – integra a distribuição imagem do líder descendente, fazendo uso da característica de poder das pontas como fator de estimulo e intensificação do campo elétrico devido a streamers nas partes aguçadas das estruturas sob estudo, para temporizar o momento do processo de attachment. O gatilho para o líder descendente, por hipótese, se deve a ejeção aleatória de pacotes de cargas elétricas em domínios turbulentos no interior das nuvens que recebem energia por processos de cascata da turbulência geral, e o comportamento do líder descendente, deve obedecer à equação da força de Lorentz, no espaço de campos cruzados elétrico devido às nuvens a cima e o campo magnético da Terra, que obriga as cargas do líder a desenvolverem movimentos cicloidais que podem explicar a natureza tortuosa do trajeto do líder descendente. Com o objetivo de formalizar dados consistentes de densidade de raios é feita uma reanalise do conjunto de dados coletado pelo LLS SIPAM de outubro de 2006 a julho de 2008 na região amazônica, com cerca de 3 milhões de eventos, comparando-os com dados de torres instrumentadas para evidenciar-se sua qualidade e usabilidade. Dados de elevação de terreno do SRTM da NASA são usados para gerar formula do raio de atração (Ra) das estruturas passiveis de serem atingidas por raios e para gerar formulas de área de atração, usadas para quantificar o numero de raios que provavelmente atingirão determinada estrutura, baseado no valor de densidade de raios (raios/km2/ano) na área em estudo.

Eight-Year Follow-Up of a Fixed-Detachable Maxillary Prosthesis Utilizing an Attachment System: Clinical Protocol for Individuals With Skeletal Class III Malocclusions

The aim of this article is to describe a successful clinical protocol for prosthodontic rehabilitation of a patient with a skeletal Class III malocclusion using a fixed-detachable maxillary prosthesis supported by 6 implants and the MK1 attachment system. The patient was followed up for 8 years. A 46-year-old edentulous woman with a skeletal Class III malocclusion expressed dissatisfaction with her old existing maxillary denture from an esthetic point of view and frustration regarding its function. A fixed-detachable maxillary prosthesis using the MK1 attachment system was made. The patient was followed up clinically and radiographically for 8 years. No bone loss, fracture of prosthetic components, or fracture of the prosthesis was detected in that period. A fixed detachable maxillary prosthesis using the MK1 attachment system is a treatment option for patients with Class III malocclusions who opt not to undergo orthognathic surgery.

Investigation of the structural, optical and dielectric properties of highly (100)-oriented (Pb0.60Ca0.20Sr0.20)TiO3 thin films on LaNiO3 bottom electrode

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Processing and structural properties of random oriented lead lanthanum zirconate titanate thin films

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of UV-photofunctionalization on oral bacterial attachment and biofilm formation to titanium implant material

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)