Fracture criterion based on the higher-order asymptotic fields

A complete development for the higher-order asymptotic solutions of the crack tip fields and finite element calculations for mode I loading of hardening materials in plane strain are performed. The results show that in the higher-order asymptotic solution (to the twentieth order), only three coefficients are independent. These coefficients are determined by matching with the finite element solutions carried out in the present paper (our attention is focused on the first five terms of the higher-order asymptotic solution). We obtain an analytic characterization of crack tip fields, which conform very well to the finite element solutions over wide range. A modified two parameter criterion based on the asymptotic solution of five terms is presented. The upper bound and lower bound fracture toughness curves predicted by modified two parameter criterion are given. These two curves agree with most of the experimental data and fully capture the proper trend.

Bending solution of high-order refined shear deformation-theory for rectangular composite plates

A new high-order refined shear deformation theory based on Reissner's mixed variational principle in conjunction with the state- space concept is used to determine the deflections and stresses for rectangular cross-ply composite plates. A zig-zag shaped function and Legendre polynomials are introduced to approximate the in-plane displacement distributions across the plate thickness. Numerical results are presented with different edge conditions, aspect ratios, lamination schemes and loadings. A comparison with the exact solutions obtained by Pagano and the results by Khdeir indicates that the present theory accurately estimates the in-plane responses.

Higher-order analysis of crack-tip fields in power-law hardening materials

In this paper, we present an exact higher-order asymptotic analysis on the near-crack-tip fields in elastic-plastic materials under plane strain, Mode I. A four- or five-term asymptotic series of the solutions is derived. It is found that when 1.6 < n less-than-or-equal-to 2.8 (here, n is the hardening exponent), the elastic effect enters the third-order stress field; but when 2.8< n less-than-or-equal-to 3.7 this effect turns to enter the fourth-order field, with the fifth-order field independent. Moreover, if n>3.7, the elasticity only affects the fields whose order is higher than 4. In this case, the fourth-order field remains independent. Our investigation also shows that as long as n is larger than 1.6, the third-order field is always not independent, whose amplitude coefficient K3 depends either on K1 or on both K1 and K2 (K1 and K2 arc the amplitude coefficients of the first- and second-order fields, respectively). Firmly, good agreement is found between our results and O'Dowd and Shih's numerical ones[8] by comparison.

High order asymptotic field for plane stress crack problem

This paper presents an exact analysis for high order asymptotic field of the plane stress crack problem. It has been shown that the second order asymptotic field is not an independent eigen field and should be matched with the elastic strain term of the first order asymptotic field. The second order stress field ahead of the crack tip is quite small compared with the first order stress field. The stress field ahead of crack tip is characterized by the HRR field. Hence the J integral can be used as a criterion for crack initiation.

Higher-order analysis of crack tip fields in elastic power-law hardening materials

A HIGHER-ORDER asymptotic analysis of a stationary crack in an elastic power-law hardening material has been carried out for plane strain, Mode 1. The extent to which elasticity affects the near-tip fields is determined by the strain hardening exponent n. Five terms in the asymptotic series for the stresses have been derived for n = 3. However, only three amplitudes can be independently prescribed. These are K1, K2 and K5 corresponding to amplitudes of the first-, second- and fifth-order terms. Four terms in the asymptotic series have been obtained for n = 5, 7 and 10; in these cases, the independent amplitudes are K1, K2 and K4. It is found that appropriate choices of K2 and K4 can reproduce near-tip fields representative of a broad range of crack tip constraints in moderate and low hardening materials. Indeed, fields characterized by distinctly different stress triaxiality levels (established by finite element analysis) have been matched by the asymptotic series. The zone of dominance of the asymptotic series extends over distances of about 10 crack openings ahead of the crack tip encompassing length scales that are microstructurally significant. Furthermore, the higher-order terms collectively describe a spatially uniform hydrostatic stress field (of adjustable magnitude) ahead of the crack. Our results lend support to a suggestion that J and a measure of near-tip stress triaxiality can describe the full range of near-tip states.

High-order asymptotic field of tensile plane-strain nonlinear crack problems

In this paper, the governing equations and the analytical method of the secondorder asymptotic field for the plane-straln crack problems of mode I have been presented. The numerical calculation has been carried out. The amplitude coefficients k2 of the second term of the asymptotic field have been determined after comparing the present results with some fine results of the finite element calculation. The variation of coefficients k2 with changes of specimen geometry and developments of plastic zone have been analysed. It is shown that the second term of the asymptotic field has significant influence on the near-crack-tip field. Therefore, we may reasonably argue that both the J-integral and the coefficient k2 can beeome two characterizing parameters for crack initiation.

Understanding the ex-ante cost of liquidity in the limit order book: A note

This paper estimates a new measure of liquidity costs in a market driven by orders. It represents thecost of simultaneously buying and selling a given amount of shares, and it is given by a single measure of ex-ante liquidity that aggregates all available information in the limit order book for a given number of shares. The cost of liquidity is an increasing function relating bid-ask spreads with the amounts available for trading. This measure completely characterizes the cost of liquidity of any given asset. It does not suffer from the usual ambiguities related to either the bid-ask spread or depth when they are considered separately. On the contrary, with a single measure, we are able to capture all dimensions of liquidity costs on ex-ante basis.

Democracia eletrônica para quem? : Quem são, o que querem e como os cidadãos avaliam o portal da Câmara dos Deputados

A dissertação busca responder em que medida todas as possibilidades de interação ofertadas pelo Portal da Câmara dos Deputados atendem às necessidades de interação política dos cidadãos que utilizam estes novos canais. Quem são os usuários destas novas ferramentas? Qual a avaliação que eles fazem destes novos canais? Qual é a opinião deles sobre as possibilidades de participação eletrônica? O principal aspecto teórico abordado nesta dissertação é a seguinte discussão: a internet replica formas de participação tradicionais ou é realmente capaz de fazer com que mais cidadãos, incluindo aqueles que estão alheios e desinteressados, participem? Essas questões foram direcionadas ao Portal da Câmara dos Deputados do Brasil, que, ao longo dos últimos anos, soube adaptar-se e promover um espaço de amplo acesso a informações legislativas, com capacidade de contato e interação entre o cidadão e o seu representante e é considerado, atualmente, o melhor portal legislativo da América do Sul. A dissertação utilizou duas metodologias distintas. A primeira consistiu em analisar as estatísticas de acesso ao Portal, identificando assim os padrões de acesso: os sites de referência e os caminhos de busca através dos quais se chega ao Portal. A segunda consistiu na condução de um Web Survey para coletar a opinião dos usuários. O questionário aplicado teve como objetivo coletar avaliações das ferramentas disponibilizadas pelo Portal, identificar o perfil dos usuários e compreender-lhes o comportamento político no mundo off-line. Um dos principais achados é o de que a Democracia Eletrônica desenvolvida pelo Portal da Câmara dos Deputados tem servido mais aos profissionais da política que ao cidadão comum. Mas, mesmo assim, o cidadão comum, interessado em buscar participação, contato e interação com os atores políticos, está procurando essas ferramentas on-line. Palavras chaves: Democracia Eletrônica, Câmara dos Deputados, pesquisa on-line, estatísticas de acesso.