Assessment of evaluations made to healthy eating policies in Europe: a review within the EATWELL Project

Objective: To identify and assess healthy eating policies at national level which have been evaluated in terms of their impact on awareness of healthy eating, food consumption, health outcome or cost/benefit. Design: Review of policy documents and their evaluations when available. Setting: European Member States. Subjects: One hundred and twenty-one policy documents revised, 107 retained. Results: Of the 107 selected interventions, twenty-two had been evaluated for their impact on awareness or knowledge and twenty-seven for their impact on consumption. Furthermore sixteen interventions provided an evaluation of health impact, while three actions specifically measured any cost/benefit ratio. The indicators used in these evaluations were in most cases not comparable. Evaluation was more often found for public information campaigns, regulation of meals at schools/canteens and nutrition education programmes. Conclusions: The study highlights the need not only to develop harmonized and verifiable procedures but also indicators for measuring effectiveness and success and for comparing between interventions and countries. EU policies are recommended to provide a set of indicators that may be measured consistently and regularly in all countries. Furthermore, public information campaigns should be accompanied by other interventions, as evaluations may show an impact on awareness and intention, but rarely on consumption patterns and health outcome.

Policies to promote healthy eating in Europe: a structured review of policies and their effectiveness

This review provides a classification of public policies to promote healthier eating as well as a structured mapping of existing measures in Europe. Complete coverage of alternative policy types was ensured by complementing the review with a selection of major interventions from outside Europe. Under the auspices of the Seventh Framework Programme's Eatwell Project, funded by the European Commission, researchers from five countries reviewed a representative selection of policy actions based on scientific papers, policy documents, grey literature, government websites, other policy reviews, and interviews with policy-makers. This work resulted in a list of 129 policy interventions, 121 of which were in Europe. For each type of policy, a critical review of its effectiveness was conducted, based on the evidence currently available. The results of this review indicate a need exists for a more systematic and accurate evaluation of government-level interventions as well as for a stronger focus on actual behavioral change rather than changes in attitude or intentions alone. The currently available evidence is very heterogeneous across policy types and is often incomplete.

Impact of polydextrose on the faecal microbiota: a double-blind, crossover, placebo-controlled feeding study in healthy human subjects

In this placebo-controlled, double-blind, crossover human feeding study, the effects of polydextrose (PDX; 8 g/d) on the colonic microbial composition, immune parameters, bowel habits and quality of life were investigated. PDX is a complex glucose oligomer used as a sugar replacer. The main goal of the present study was to identify the microbial groups affected by PDX fermentation in the colon. PDX was shown to significantly increase the known butyrate producer Ruminococcus intestinalis and bacteria of the Clostridium clusters I, II and IV. Of the other microbial groups investigated, decreases in the faecal Lactobacillus–Enterococcus group were demonstrated. Denaturing gel gradient electrophoresis analysis showed that bacterial profiles between PDX and placebo treatments were significantly different. PDX was shown to be slowly degraded in the colon, and the fermentation significantly reduced the genotoxicity of the faecal water. PDX also affected bowel habits of the subjects, as less abdominal discomfort was recorded and there was a trend for less hard and more formed stools during PDX consumption. Furthermore, reduced snacking was observed upon PDX consumption. This study demonstrated the impact of PDX on the

Shifts in metabolic scaling, production, and efficiency across major evolutionary transitions of life

The diversification of life involved enormous increases in size and complexity. The evolutionary transitions from prokaryotes to unicellular eukaryotes to metazoans were accompanied by major innovations inmetabolicdesign.Hereweshowthat thescalingsofmetabolic rate, population growth rate, and production efficiency with body size have changed across the evolutionary transitions.Metabolic rate scales with body mass superlinearly in prokaryotes, linearly in protists, and sublinearly inmetazoans, so Kleiber’s 3/4 power scaling law does not apply universally across organisms. The scaling ofmaximum population growth rate shifts from positive in prokaryotes to negative in protists and metazoans, and the efficiency of production declines across these groups.Major changes inmetabolic processes duringtheearlyevolutionof life overcameexistingconstraints, exploited new opportunities, and imposed new constraints. The 3.5 billion year history of life on earth was characterized by

Paradise postponed? The Department of National Heritage and political hegemony

Established following the Conservative Party's election victory in April 1992, the Department of National Heritage has been heralded as an important stage in the growing recognition of the significance of the leisure industry to Britain. By combining, for the first time, responsibility for sport, tourism, the arts, libraries, heritage, broadcasting and film, and by providing them with Cabinet representation, a unique opportunity has, seemingly, been provided to develop and promote the interests of leisure in Britain. This paper takes the view that although this initiative has been broadly welcomed, there are important inconsistencies which require attention. On the one hand the selection of the portfolio appears somewhat eclectic. On the other hand, it is questionable why such a department should have been developed at all. An inspection of the implicit ideology suggests that rather than the traditional use of the state to promote leisure interests, the introduction of the department signifies a shift to the use of leisure to promote the Government's interests. Thus the new Department of National Heritage is to be used as a central feature in the legitimation of the government's political programme. Rather than emphasising its traditional quasi-welfare role, the new place for leisure and heritage is firmly in the market economy. Whilst a leisured society may be the epitome of post-industrialism, therefore, the citizen rights claim for access to leisure activities can only be secured by engaging with the market. This legitimised construction of post- modern citizenship is at the centre of a new political order where choice has been replaced by means and where the classless paradigm championed by the Prime Minister will be a classlessness of constructed omission.

10,000 years in the life of the river Wandle: excavations at the former Vinamul site, Butter Hill, Wallington

Archaeological excavations alongside the river Wandle in Wallington produced evidence of the environmental history and human exploitation of the area. The recovery of a large assemblage of struck flint provided information on the nature of the prehistoric activities represented, while a detailed environmental archaeological programme permitted an examination of both the local sediment successions and thus an opportunity to reconstruct the environmental history of the site. The site revealed a complex sedimentary sequence deposited in riverine conditions, commencing during the early Holocene (from c 10,000 years before present) and continuing through the late Holocene (c last 3000 years). Large flint nodules were washed by the river onto the site where they were procured and worked by Mesolithic and Bronze Age communities. Potentially usable nodules had been tested, and suitable pieces completely reduced, while the majority of useful flakes and blades had been removed for use elsewhere. Small numbers of retouched pieces, such as scrapers and piercers, indicate that domestic activities took place nearby. By the Saxon period the site had begun to stabilise, although it remained marshy and probably peripheral to habitation. Two pits from this period were excavated, one of which contained an antler pick. A small quantity of cereal grain also suggests that cultivated land lay in the vicinity of the site. During the 19th century a mill race was dug across the site, redirecting water from the river Wandle, which resulted in episodic flooding.

Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.

The National Audit Office uses OR to assess the value for money of public services

Supreme audit institutions (SAIs) have an important role in assessing value for money in the delivery of public services. Assessing value for money necessarily involves assessing counterfactuals: good value for money has been achieved if a policy could not reasonably have been delivered more efficiently, effectively, or economically. Operations research modelling has the potential to help in the assessment of these counterfactuals. However, is such modelling too arcane, complex, and technically burdensome for organisations that, like SAIs, operate in a time- and resource-constrained and politically charged environment? We report on three applications of modelling at the UK's SAI, the National Audit Office, in the context of studies on demand management in tax collection, end-of-life care, and health-care associated infections. In all cases, the models have featured in the audit reports and helped study teams come to a value-for-money judgment. We conclude that OR modelling is indeed a valuable addition to the value-for-money auditor's methodological tool box.

Whole life carbon – a building case study

There is potential to reduce both operational and embodied greenhouse gas emission from buildings. To date the focus has been on reducing the operational element, although given the urgency of carbon reductions, it may be more beneficial to consider upfront embodied carbon reductions. This paper describes a case study on the whole life carbon cycle of a warehouse building in Swindon, UK. It examines the relationship between embodied carbon (Ec) and operational carbon (Oc), the proportions of Ec from the structural and non-structural elements, carbon benchmarking of the structure, the value of ‘cradle to site’ or ‘cradle to grave’ assessments and the significance of the timing of emissions during the life of the building. The case study indicates that Ec was dominant for the building and that the structure was responsible for more than half of the Ec. Weighting of future emissions appears to be an important factor to consider. The PAS 2050 reduction factors had only a modest effect but weighting to allow for future decarbonisation of the national grid energy supply had a large effect. This suggests that future operational carbon emissions are being overestimated compared to embodied.

Life before the minster: the social dynamics of monastic foundation at Anglo-Saxon Lyminge, Kent

Anglo-Saxon monastic archaeology has been constrained by the limited scale of past investigations and their overriding emphasis on core buildings. This paper draws upon the results of an ongoing campaign of archaeological research that is redressing the balance through an ambitious programme of open-area excavation at Lyminge, Kent, the site of a royal double monastery founded in the seventh century ad. The results of five completed fieldwork seasons are assessed and contextualised in a narrative sequence emphasising the dynamic character of Lyminge as an Anglo-Saxon monastic settlement. In so doing, the study brings into sharp focus how early medieval monasteries were emplaced in the landscape, with specific reference to Anglo-Saxon Kent, a regional context offering key insights into how the process of monastic foundation redefined antecedent central places of long-standing politico-religious significance and social action.

The national dialogue on behaviour change in UK climate policy: some observations on responsibility, agency and political dimensions

This chapter explores the politics around the role of agency in the UK climate change debate. Government interventions on the demand side of consumption have increasingly involved attempts to obtain greater traction with the values, attitudes and beliefs of citizens in relation to climate change and also in terms of influencing consumer behaviour at an individual level. With figures showing that approximately 40% of the UK’s carbon emissions are attributable to household and transport behaviour, policy initiatives have progressively focused on the facilitation of “sustainable behaviours”. Evidence suggests however, that mobilisation of pro-environmental attitudes in addressing the perceived “value-action gap” has so far had limited success. Research in this field suggests that there is a more significant and nuanced “gap” between context and behaviour; a relationship that perhaps provides a more adroit reflection of reasons why people do not necessarily react in the way that policy-makers anticipate. Tracing the development of the UK Government’s behaviour change agenda over the last decade, we posit that a core reason for the limitations of this programme relates to an excessively narrow focus on the individual. This has served to obscure some of the wider political and economic aspects of the debate in favour of a more simplified discussion. The second part of the chapter reports findings from a series of focus groups exploring some of the wider political views that people hold around household energy habits, purchase and use of domestic appliances, and transport behaviour-and discusses these insights in relation to the literature on the agenda’s apparent limitations. The chapter concludes by considering whether the aims of the Big Society approach (recently established by the UK’s Coalition Government) hold the potential to engage more directly with some of these issues or whether they merely constitute a “repackaging” of the individualism agenda.

Finding the 'first voice' in rural England: the challenges of safeguarding intangible heritage in a national museum

This paper is an attempt to explore the challenges of defining intangible heritage and ‘community’ in England. It uses as its case study the Museum of English Rural Life, University of Reading: an urban museum with a rural theme. The paper examines current theoretical discourse around the concept of the ‘first voice’ and debate about the role of museums in the preservation of intangible heritage. It then examines the relevance of these concepts to the identification of ‘rural’ intangible heritage stake holders in England. In this way, it shows the potential for concepts of intangible heritage to influence national museums. However, by applying theory and practice which is designed to support work with well-defined ‘originating communities’ to a national museum, it also highlights the challenges of initiating community engagement in a multicultural society.

Clonal expansion of early to mid-life mitochondrial DNA point mutations drives mitochondrial dysfunction during human ageing

Age-related decline in the integrity of mitochondria is an important contributor to the human ageing process. In a number of ageing stem cell populations, this decline in mitochondrial function is due to clonal expansion of individual mitochondrial DNA (mtDNA) point mutations within single cells. However the dynamics of this process and when these mtDNA mutations occur initially are poorly understood. Using human colorectal epithelium as an exemplar tissue with a well-defined stem cell population, we analysed samples from 207 healthy participants aged 17-78 years using a combination of techniques (Random Mutation Capture, Next Generation Sequencing and mitochondrial enzyme histochemistry), and show that: 1) non-pathogenic mtDNA mutations are present from early embryogenesis or may be transmitted through the germline, whereas pathogenic mtDNA mutations are detected in the somatic cells, providing evidence for purifying selection in humans, 2) pathogenic mtDNA mutations are present from early adulthood (<20 years of age), at both low levels and as clonal expansions, 3) low level mtDNA mutation frequency does not change significantly with age, suggesting that mtDNA mutation rate does not increase significantly with age, and 4) clonally expanded mtDNA mutations increase dramatically with age. These data confirm that clonal expansion of mtDNA mutations, some of which are generated very early in life, is the major driving force behind the mitochondrial dysfunction associated with ageing of the human colorectal epithelium.

Massive Open Online Courses and sustainability

Massive Open Online Courses (MOOCs) have become very popular among learners millions of users from around the world registered with leading platforms. There are hundreds of universities (and other organizations) offering MOOCs. However, sustainability of MOOCs is a pressing concern as MOOCs incur up front creation costs, maintenance costs to keep content relevant and on-going support costs to provide facilitation while a course is being run. At present, charging a fee for certification (for example Coursera Signature Track and FutureLearn Statement of Completion) seems a popular business model. In this paper, the authors discuss other possible business models and their pros and cons. Some business models discussed here are: Freemium model – providing content freely but charging for premium services such as course support, tutoring and proctored exams. Sponsorships – courses can be created in collaboration with industry where industry sponsorships are used to cover the costs of course production and offering. For example Teaching Computing course was offered by the University of East Anglia on the FutureLearn platform with the sponsorship from British Telecom while the UK Government sponsored the course Introduction to Cyber Security offered by the Open University on FutureLearn. Initiatives and Grants – The government, EU commission or corporations could commission the creation of courses through grants and initiatives according to the skills gap identified for the economy. For example, the UK Government’s National Cyber Security Programme has supported a course on Cyber Security. Similar initiatives could also provide funding to support relevant course development and offering. Donations – Free software, Wikipedia and early OER initiatives such as the MIT OpenCourseware accept donations from the public and this could well be used as a business model where learners could contribute (if they wish) to the maintenance and facilitation of a course. Merchandise – selling merchandise could also bring revenue to MOOCs. As many participants do not seek formal recognition (European Commission, 2014) for their completion of a MOOC, merchandise that presents their achievement in a playful way could well be attractive for them. Sale of supplementary material –supplementary course material in the form of an online or physical book or similar could be sold with the revenue being reinvested in the course delivery. Selective advertising – courses could have advertisements relevant to learners Data sharing – though a controversial topic, sharing learner data with relevant employers or similar could be another revenue model for MOOCs. Follow on events – the courses could lead to follow on summer schools, courses or other real-life or online events that are paid-for in which case a percentage of the revenue could be passed on to the MOOC for its upkeep. Though these models are all possible ways of generating revenue for MOOCs, some are more controversial and sensitive than others. Nevertheless unless appropriate business models are identified the sustainability of MOOCs would be problematic.

Love of reading: the evaluation of KidsREAD programme in Singapore

In Singapore about 20% of families are considered to be socio-economically disadvantaged. Children from these families have been identified as having reading difficulties when they enter primary school. Recognizing that children from these families have limited access to reading materials, the National Library Board, in partnership with local community clubs and family service centres, has established the KidsREAD literacy programme where volunteers, mostly university and college students, help children between 4 and 8 years of age overcome some of their reading problems. The KidsREAD clubs aim to “promote the love of reading and cultivate good reading habits among all young Singaporeans, in particular children from low-income families” (National Library Board, 2005). This paper presents an evaluation of the KidsREAD clubs with regard to children’s attitudes towards reading. It explores the differences in children’s reading attitudes at the beginning of the programme and half way through the programme. The study was carried out in three representative clubs. This paper evaluates the attitudes of 65 children towards the clubs and the activities conducted at the clubs. It outlines the children’s beliefs about reading and the extent to which they value reading. It further explores how much KidsREAD clubs have influenced their attitudes towards reading in general and their enjoyment of reading in particular.