Fully Relativistic 4-Components DFT Investigation on Bonding and Dissociation Energy of HgO

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigation on Surface Finishing of Components Ground with Lapping Kinematics: Lapgrinding Process

Over the last three decades, researchers have responded to the demands of industry to manufacture mechanical components with geometrical tolerance, dimensional tolerance, and surface finishing in nanometer levels. The new lapgrinding process developed in Brazil utilizes lapping kinematics and a flat grinding wheel dressed with a single-point diamond dresser in agreement with overlap factor (U(d)) theory. In the present work, the influences of different U(d) values on dressing (U(d) = 1, 3 e 5) and grain size of the grinding wheel made of silicon carbide (SiC = 800, 600 e 300 mesh) are analyzed on surface finishing of stainless steel AISI 420 flat workpieces submitted to the lapgrinding process. The best results, obtained after 10 minutes of machining, were: average surface roughness (Ra) 1.92 nm; 1.19 mu m flatness deviation of 25.4 mm diameter workpieces and mirrored surface finishing. Given the surface quality achieved, the lapgrinding process can be included among the ultra-precision finishing processes and, depending on the application, the steps of lapping followed by polishing can be replaced by the proposed abrasive process.

Absence of gluonic components in axial and tensor mesons

A quarkonium-gluonium mixing scheme previously developed to describe the characteristic of the pseudoscalar mesons is applied to axial and tensor mesons. The parameters of the model are determined by fitting the eigenvalues of a mass matrix. The corresponding eigenvectors give the proportion of light quarks, strange quarks and glueball in each meson. However, the predictions of the model for the branching ratios and electromagnetic decays are incompatible with the experimental results. These results suggest the absence of gluonic components in the states of axial and tensor isosinglet mesons analyzed here.

Waveshapes of continuing currents and properties of M-components in natural positive cloud-to-ground lightning

This work analyses the waveshapes of continuing currents and parameters of M-components in positive cloud-to-ground (CG) flashes through high-speed GPS synchronized videos. The dataset is composed of only long continuing currents (with duration longer than 40 ms) and was selected from more than 800 flashes recorded in Sao Jose dos Campos (45.864 degrees W, 23.215 degrees S) and Uruguaiana (29.806 degrees W, 57.005 degrees S) in Southeast and South of Brazil, respectively, during 2003 to 2007 summers. The videos are compared with data obtained by the Brazilian Lightning Location System (BrasilDAT) in order to determine the polarity of each flash and select only positive cases. There are only two studies of waveshapes of continuing currents in the literature. One is based on direct current measurements of triggered lightning, in which four different types of waveshapes were observed; and the other is based on measurements of luminosity variations in high-speed videos of CG negative lightning, in which besides the four types above mentioned two additional types were observed. The present work is an extension of the latter, using the same method but now applied to obtain the waveshapes of positive CG lightning. As far as the authors know, this is the first report on M-components in positive continuing currents. We also have used the luminosity-versus-time graphs to observe their occurrence and measure some parameters (duration, elapsed time and time between two successive M-components), whose statistics are presented and compared in detail to the data for negative flashes. We have plotted a histogram of the M-components elapsed time over the total duration of the continuing current for positive flashes, which presented an exponential decay (correlation coefficient: 0.83), similar to what has been observed for negative flashes. (C) 2008 Elsevier B.V. All rights reserved.

A metallurgical study of aluminium alloys used as aircraft components

The effects of heat treatment on morphologies and microstructures of Al 2024 and Al 7050 alloys, used as aircraft components, were studied by metallographic techniques. Light microscopy (LM) and quantitative image analysis were used to characterize the precipitate dispersion and morphology for these alloys. The application of the scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) combined techniques for studying these multiphase systems makes it possible to distinguish and quantify the different phases in the surface structure. Xray diffraction also permitted a qualitative comparison of the structures before and after heat treatments.

A control chart based on sample ranges for monitoring the covariance matrix of the multivariate processes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A new chart based on sample variances for monitoring the covariance matrix of multivariate processes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ferramentas quimiométricas aplicadas a classificação de amostras de leite em pó e quantificação de proteínas

In this work we used chemometric tools to classify and quantify the protein content in samples of milk powder. We applied the NIR diffuse reflectance spectroscopy combined with multivariate techniques. First, we carried out an exploratory method of samples by principal component analysis (PCA), then the classification of independent modeling of class analogy (SIMCA). Thus it became possible to classify the samples that were grouped by similarities in their composition. Finally, the techniques of partial least squares regression (PLS) and principal components regression (PCR) allowed the quantification of protein content in samples of milk powder, compared with the Kjeldahl reference method. A total of 53 samples of milk powder sold in the metropolitan areas of Natal, Salvador and Rio de Janeiro were acquired for analysis, in which after pre-treatment data, there were four models, which were employed for classification and quantification of samples. The methods employed after being assessed and validated showed good performance, good accuracy and reliability of the results, showing that the NIR technique can be a non invasive technique, since it produces no waste and saves time in analyzing the samples

Comparison of the univariate and multivariate methods in the optimization of experimental conditions for determining Cu, Pb, Ni and Cd in biodiesel by GFAAS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação de Ba, Cd, Cr, Cu, Ni, Pb, Sn e Zn em Tainha (Mugil brasiliensis) nos estuários potiguares

Heavy metals can cause problems of human poisoning by ingestion of contaminated food, and the environment, a negative impact on the aquatic fauna and flora. And for the presence of these metals have been used for aquatic animals biomonitoramento environment. This research was done in order to assess the environmental impact of industrial and domestic sewage dumped in estuaries potiguares, from measures of heavy metals in mullet. The methods used for these determinations are those in the literature for analysis of food and water. Collections were 20 samples of mullet in several municipality of the state of Rio Grande do Norte, from the estuaries potiguares. Were analyzed the content of humidity, ash and heavy metals. The data were subjected to two methods of exploratory analysis: analysis of the main components (PCA), which provided a multivariate interpretation, showing that the samples are grouped according to similarities in the levels of metals and analysis of hierarchical groupings (HCA), producing similar results. These tests have proved useful for the treatment of the data producing information that would hardly viewed directly in the matrix of data. The analysis of the results shows the high levels of metallic species in samples Mugil brasiliensis collected in Estuaries /Potengi, Piranhas/Açu, Guaraíra / Papeba / Arês and Curimataú

Gestão Sustentável da água: um estudo da conscientização ambiental em atividades residenciais urbanas

The search for sustainable solutions through an appropriate environmental administration of the available natural resources, that comes from encounter to the aspirations of preservation of the environment and of the human being, in way to diagnose and to solve the environmental and social problems with the smallest possible impact to the nature and the man, it is the great challenge, so much for that generation, as for the future generations. The study of the environmental problems of the water and the participation and the social actors' environmental understanding as a whole, interferes in the field of the thematic environmental international, contemplating the strategic need of an appropriate administration of that very natural one, through a program returned to the diagnosis of the problems and in the search of compatible maintainable solutions, in a social and environmental politics of planning and environmental education, centered above all in the citizen's voice , user of that system. The present thesis she seeks to study the problem of the maintainable administration of the water, focusing the participation and the citizen's environmental understanding in the use of that very natural one for urban residential activities, in what concerns the approach and analyses of variables that treat of the measurement of general knowledge and you adapt, sense of community of the access to the means of information and of the attitudes and environmental behaviors, besides the variables of partner-demographic characterization or personal identification of the interviewed ones of an exploratory research of the type " survey ", accomplished through a stratified aleatory sampling, being the strata each one of the 4 (four) Political-Administrative Areas of the Natal city, having happened the collection of the data in the period of february to april/2002. The methodology used in this work it constitutes in the application of questionnaires with scales of the type Likert to measure the echo-varied of the study, besides a partner-demographic scale for the characterization of the studied sample. For the analysis of the results, it was made an exploratory descriptive study initially, followed by the use of techniques statistical multivariate s, such as, factorial analysis through the application of main components, besides the accomplishment of studies of multiple lineal regression. To complement this study, the accomplishment of Tests of Independence was proceeded through the Qui-square of Pearson, in way to verify the dependence of the associations between the partner-demographic variables and the principal selected variables and presents in the resulting factors of the factorial analysis. The results appear for a low level of environmental knowledge, of access to the information and community's sense, besides the verification that the principal factors resultants send for the need of feeling emphasis in the programs and administration actions addressed for the environmental understanding, the behaviors and attitudes that approach the information and the environmental education, besides the reuse of the water

Metabolic syndrome and its associated risk factors in Brazilian postmenopausal women

Objective To evaluate the prevalence of metabolic syndrome (MetS) and its associated risk factors in Brazilian postmenopausal women.Methods In this cross-sectional study, a total of 368 postmenopausal women, aged 40-75 years, seeking health care at a public outpatient center in Southeastern Brazil, were included. According to the US National Cholesterol Education Program Adult Treatment Panel III (NCEP ATP III) guidelines, MetS was diagnosed in subjects with three or more of the following: waist circumference >= 88 cm, blood pressure >= 130/85 mHg, triglycerides >= 150 mg/dl, high density lipoprotein cholesterol <50 mg/dl and glucose >= 110 mg/dl. Data on past medical history, tobacco use, anthropometric indicators, and values of C-reactive protein (CRP) were collected. Multivariate analysis, using a logistic regression model (odds ratio, OR) was used to evaluate the influence of various simultaneous MetS risk factors.Results The prevalence of having at least three, four and five MetS diagnostic criteria were met in 39.6%, 16.8% and 3.8% of the cases, respectively. The most prevalent risk factor was abdominal obesity, affecting 62.5% of women. The risk of MetS increased with a personal history of diabetes (OR 5.95, 95% confidence interval (CI) 2.82-12.54), hypertension (OR 4.52, 95% CI 2.89-7.08), cardiovascular disease (OR 2.16, 95% CI 1.18-3.94) and high CRP (>1 mg/dl) (OR 3.35, 95% CI 1.65-6.79). Plasma CRP levels increased with the number of MetS components present. Age, time since menopause and smoking had no influence, while hormone therapy reduced MetS risk (OR 0.64, 95% CI 0.42-0.97).Conclusion Metabolic syndrome was highly prevalent among Brazilian postmenopausal women seeking gynecologic health care. Abdominal obesity, diabetes, hypertension and high CRP were strong MetS predictors and hormone therapy appeared to play a protective role for this condition.

Time-dependent alterations of soluble and cellular components in human milk

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Brazilian natural dietary components (annatto, propolis and mushrooms) protecting against mutation and cancer

Considering the high number of new cancer cases in Brazil (approximately 470 000 cases in 2005) and the remarkable differences in the incidence of this disease around the world, the development of chemopreventive strategies using foods widely consumed would have a huge impact, both medically and economically. This review summarizes some of our studies conducted to verify the anti-mutagenic and anti-carcinogenic potential of some Brazilian natural dietary constituents (annatto, mushrooms, and propolis). Overall data have shown a clear role for these compounds in preventing mutation and specific preneoplastic lesions. Taken together, these agents indicate a favorable side-effect profile and may prove to be a promising alternative for cancer prevention strategies, although more investigation is needed to fully explore this issue.

Dietary components may prevent mutation-related diseases in humans

Since it is not always possible to reduce human exposure to mutagens, attempts have been directed to identify potential antimutagens and anticarcinogens for use in protecting the population against environmental disease. The purpose of this paper is to provide the reader with information about the antimutagenic and anticarcinogenic potentials of some dietary constituents and foods widely consumed in Brazil, and to reinforce diet as a key factor in determining genomic stability and preventing human diseases. In this report, we have summarized data that show interactive effects between some dietary components and specific chemical mutagens or carcinogens using in vitro and in vivo short- or medium-term assays. The summary indicates that certain dietary compounds may be useful agents for disease prevention. (C) 2003 Elsevier B.V. All rights reserved.