Análise ergonômica no posto de trabalho numa linha de produção utilizando método Niosh: um estudo de caso no pólo industrial de Manaus

O presente trabalho visa realizar uma análise ergonômica em uma linha de produção. Através de pesquisas, análises de relatórios e procedimentos tornou-se possível chegar a conclusões que permitiram formular propostas que objetivam à redução do impacto do trabalho realizado na saúde do colaborador. Sendo assim, o objetivo principal desta pesquisa é analisar a situação ergonômica da linha de produção focalizando a biomecânica do trabalho. A justificativa é em virtude da grande evasão de colaboradores devido aos problemas de saúde relacionados a ergonomia, derivados dos principais problemas que enfrentam com o manuseio e movimentação de cargas pesadas, como a dor lombar, levando a apresentar problemas crônicos e agudos. O método utilizado consistiu, primeiramente, no levantamento de dados reais de produção na empresa, nos casos similares estudados em literatura e nos cálculos matemáticos que puderam comprovar as análises, observando-se que, apesar dos avanços da tecnologia e a mecanização das tarefas, muitas atividades continuam sendo realizadas manualmente. As conclusões obtidas deixam claros os cuidados que se devem ter com a saúde do colaborador através da implementação de ações que visem a melhoria da área de trabalho com equipamento adequado para a atividade a ser desempenhada, redundando em benefícios tanto para o empregado como para o próprio empregador.

Desenvolvimento de um sistema moving cameras para reconstrução 3D de movimentos submersos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Phase space properties and chaotic transport for a particle moving in a time dependent step potential well

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comparative analysis of two techniques for detection and segmentation of moving bodies

This paper makes a comparative analysis of results produced by the application of two techniques for the detection and segmentation of bodies in motion captured in images sequence, namely: 1) technique based on the temporal average of the values of each pixel recorded in N consecutive image frames and, 2) technique based on historical values associated with pixels recorded in different frames of an image sequence.

O padrão de compressão de video MPEG moving picture experts group

This work focuses on the study of video compression standard MPEG. To this end, a study was undertaken starting from the basics of digital video, addressing the components necessary for the understanding of the tools used by the video coding standard MPEG. The Motion Picture Experts Group (MPEG) was formed in the late '80s by a group of experts in order to create international standards for encoding and decoding audio and video. This paper will discuss the techniques present in the video compression standard MPEG, as well as its evolution. Will be described in the MPEG-1, MPEG-2, MPEG-4 and H.264 (MPEG-4 Part 10), however, the last two will be presented with more emphasis, because the standards are present in most modern video technologies, as in HDTV broadcasts

Implantação do sistema kanban para elementos de fixação em maquinas de movimentação de terra

Always seeking the maximum profit under the reduced production time and lower number of failures, companies are increasingly evolving and going after continuous improvement in order to remain competitive in the market. Thus, increasingly there is investment in the management system Lean manufacturing. Lean system is very important, because through it, the maximum value is added in the final product. Being measured by the efficiency and reducing failures to zero. In the studied company, Lean manufacturing system came into effect through the kanban system for purchasing, control and distribution of bulk material used in the assembly of the final product, which are earth-moving machines. It is very important to check the great change made in the company with the implementation of kanban. All inventory management becomes visual, elements are arranged in an organized manner, with addresses in structures, calculated in special boxes and finally, assemblers have the guarantee of an item supply, with the distribution cars located on their assembly area. This study participates effectively assuring the supply. Avoiding any failure on the lack of material, non-compliance of delivery times to the customer and maintenance of over-stock or obsolete inventory, in which case both cause financial loss to the company

Self-assembly in aqueous solution of amphiphilic graft copolymers from oxidized carboxymethylcellulose

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

De novo transcriptome assembly for a non-model species, the blood-sucking bug Triatoma brasiliensis, a vector of Chagas disease

High throughput sequencing (HTS) provides new research opportunities for work on non-model organisms, such as differential expression studies between populations exposed to different environmental conditions. However, such transcriptomic studies first require the production of a reference assembly. The choice of sampling procedure, sequencing strategy and assembly workflow is crucial. To develop a reliable reference transcriptome for Triatoma brasiliensis, the major Chagas disease vector in Northeastern Brazil, different de novo assembly protocols were generated using various datasets and software. Both 454 and Illumina sequencing technologies were applied on RNA extracted from antennae and mouthparts from single or pooled individuals. The 454 library yielded 278 Mb. Fifteen Illumina libraries were constructed and yielded nearly 360 million RNA-seq single reads and 46 million RNA-seq paired-end reads for nearly 45 Gb. For the 454 reads, we used three assemblers, Newbler, CAP3 and/or MIRA and for the Illumina reads, the Trinity assembler. Ten assembly workflows were compared using these programs separately or in combination. To compare the assemblies obtained, quantitative and qualitative criteria were used, including contig length, N50, contig number and the percentage of chimeric contigs. Completeness of the assemblies was estimated using the CEGMA pipeline. The best assembly (57,657 contigs, completeness of 80 %, < 1 % chimeric contigs) was a hybrid assembly leading to recommend the use of (1) a single individual with large representation of biological tissues, (2) merging both long reads and short paired-end Illumina reads, (3) several assemblers in order to combine the specific advantages of each.

Durable bonds at the adhesive/dentin interface: an impossible mission or simply a moving target?

Composite restorations have higher failure rates, more recurrent caries and increased frequency of replacement as compared to dental amalgam. Penetration of bacterial enzymes, oral fluids, and bacteria into the crevices between the tooth and composite undermines the restoration and leads to recurrent decay and failure. The gingival margin of composite restora tions is particularly vulnerable to decay and at this margin, the adhesive and its seal to dentin provides the primary barrier between the prepared tooth and the environment. The intent of this article is to examine physico-chemical factors that affect the integrity and durability of the adhesive/dentin interfacial bond; and to explore how these factors act synergistically with mechanical forces to undermine the composite restoration. The article will examine the various avenues that have been pursued to address these problems and it will explore how alterations in material chemistry could address the detrimental impact of physico-chemical stresses on the bond formed at the adhesive/dentin interface.

Metagenomic assembly and draft genome sequence of an Uncharacterized prevotella sp. from Nelore rumen

Prevotella is one of the most abundant genera in bovine rumen, although no genome has yet been assembled by a metagenomics approach applied to Brazilian Nelore. We report the draft genome sequence of Prevotella sp., comprising 2,971,040 bp, obtained using the Illumina sequencing platform. This genome includes 127 contigs and presents a low 48% GC.

Comparing de novo and reference-based transcriptome assembly strategies by applying them to the blood-sucking bug Rhodnius prolixus

High Throughput Sequencing capabilities have made the process of assembling a transcriptome easier, whether or not there is a reference genome. But the quality of a transcriptome assembly must be good enough to capture the most comprehensive catalog of transcripts and their variations, and to carry out further experiments on transcriptomics. There is currently no consensus on which of the many sequencing technologies and assembly tools are the most effective. Many non-model organisms lack a reference genome to guide the transcriptome assembly. One question, therefore, is whether or not a reference-based genome assembly gives better results than de novo assembly. The blood-sucking insect Rhodnius prolixus-a vector for Chagas disease-has a reference genome. It is therefore a good model on which to compare reference-based and de novo transcriptome assemblies. In this study, we compared de novo and reference-based genome assembly strategies using three datasets (454, Illumina, 454 combined with Illumina) and various assembly software. We developed criteria to compare the resulting assemblies: the size distribution and number of transcripts, the proportion of potentially chimeric transcripts, how complete the assembly was (completeness evaluated both through CEGMA software and R. prolixus proteome fraction retrieved). Moreover, we looked for the presence of two chemosensory gene families (Odorant-Binding Proteins and Chemosensory Proteins) to validate the assembly quality. The reference-based assemblies after genome annotation were clearly better than those generated using de novo strategies alone. Reference-based strategies revealed new transcripts, including new isoforms unpredicted by automatic genome annotation. However, a combination of both de novo and reference-based strategies gave the best result, and allowed us to assemble fragmented transcripts.

Coordinated dispersal and pre-isthmian assembly of the Central American ichthyofauna

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Baby Boomers: Will They Be Moving to Rural Nebraska?

Baby boomers are doing it again... breaking all the molds and playing havoc with trends. This time it is with migration. Baby boomers, those born between 1946 and 1964, are entering a stage of life when it is predicted that a significant number of them will be moving to rural areas; especially those areas with scenic amenities and low housing costs.

Moving Under, Around, and Through the Miocene Reconstruction of Southern California

Modern southern California is fragmented by faults that juxtapose blocks with contrasting topographies and differing geologic histories. Many of the tectonic events that have shaped southern California were initiated during the Miocene, as subduction along the ancient trench margin off southern California was replaced by transform (strikeslip) faulting, such as that along the San Andreas fault.