Phenotypical responses of Fucus vesiculosus germlings to warming, acidification, nutrient enrichment and local upwelling under natural fluctuations (July - September 2014)

During summer 2014 (mid-July - mid-September 2014), early life-stage Fucus vesiculosus were exposed to combined ocean acidification and warming (OAW) in the presence and absence of enhanced nutrient levels (OAW x N experiment). Subsequently, F. vesiculosus germlings were exposed to a final upwelling disturbance during 3 days (mid-September 2014). Experiments were performed in the near-natural scenario "Kiel Outdoor Benthocosms" including natural fluctuations in the southwestern Baltic Sea, Kiel Fjord, Germany (54°27 'N, 10°11 'W). Genetically different sibling groups and different levels of genetic diversity were employed to test to which extent genetic variation would result in response variation. The data presented here show the phenotypical response (growth and survival) of the different experimental populations of F. vesiculosus under OAW, nutrient enrichment and the upwelling event. Log effect ratios demonstrate the responses to enhanced OAW and nutrient concentrations relative to the ambient conditons. Carbon, nitrogen content (% DW) and C:N ratios were measured after the exposure of ambient and high nutrient levels. Abiotic conditions the OAW x nutrient experiment and the upwelling event, are shown.

An Exploration of the challenges associated with software logging in large systems

Over the past few years, logging has evolved from from simple printf statements to more complex and widely used logging libraries. Today logging information is used to support various development activities such as fixing bugs, analyzing the results of load tests, monitoring performance and transferring knowledge. Recent research has examined how to improve logging practices by informing developers what to log and where to log. Furthermore, the strong dependence on logging has led to the development of logging libraries that have reduced the intricacies of logging, which has resulted in an abundance of log information. Two recent challenges have emerged as modern software systems start to treat logging as a core aspect of their software. In particular, 1) infrastructural challenges have emerged due to the plethora of logging libraries available today and 2) processing challenges have emerged due to the large number of log processing tools that ingest logs and produce useful information from them. In this thesis, we explore these two challenges. We first explore the infrastructural challenges that arise due to the plethora of logging libraries available today. As systems evolve, their logging infrastructure has to evolve (commonly this is done by migrating to new logging libraries). We explore logging library migrations within Apache Software Foundation (ASF) projects. We i find that close to 14% of the pro jects within the ASF migrate their logging libraries at least once. For processing challenges, we explore the different factors which can affect the likelihood of a logging statement changing in the future in four open source systems namely ActiveMQ, Camel, Cloudstack and Liferay. Such changes are likely to negatively impact the log processing tools that must be updated to accommodate such changes. We find that 20%-45% of the logging statements within the four systems are changed at least once. We construct random forest classifiers and Cox models to determine the likelihood of both just-introduced and long-lived logging statements changing in the future. We find that file ownership, developer experience, log density and SLOC are important factors in determining the stability of logging statements.

Utilizing ICT to prevent loneliness and social isolation of the elderly. A literature review

Ageing of the population is a worldwide phenomenon. Numerous ICT-based solutions have been developed for elderly care but mainly connected to the physiological and nursing aspects in services for the elderly. Social work is a profession that should pay attention to the comprehensive wellbeing and social needs of the elderly. Many people experience loneliness and depression in their old age, either as a result of living alone or due to a lack of close family ties and reduced connections with their culture of origin, which results in an inability to participate actively in community activities (Singh & Misra, 2009). Participation in society would enhance the quality of life. With the development of information technology, the use of technology in social work practice has risen dramatically. The aim of this literature review is to map out the state of the art of knowledge about the usage of ICT in elderly care and to figure out research-based knowledge about the usability of ICT for the prevention of loneliness and social isolation of elderly people. The data for the current research comes from the core collection of the Web of Science and the data searching was performed using Boolean? The searching resulted in 216 published English articles. After going through the topics and abstracts, 34 articles were selected for the data analysis that is based on a multi approach framework. The analysis of the research approach is categorized according to some aspects of using ICT by older adults from the adoption of ICT to the impact of usage, and the social services for them. This literature review focused on the function of communication by excluding the applications that mainly relate to physical nursing. The results show that the so-called ‘digital divide’ still exists, but the older adults have the willingness to learn and utilise ICT in daily life, especially for communication. The data shows that the usage of ICT can prevent the loneliness and social isolation of older adults, and they are eager for technical support in using ICT. The results of data analysis on theoretical frames and concepts show that this research field applies different theoretical frames from various scientific fields, while a social work approach is lacking. However, a synergic frame of applied theories will be suggested from the perspective of social work.

Assessing the Societal Impact of Research: The Relational Engagement Approach

Marketing and policy researchers seeking to increase the societal impact of their scholarship should engage directly with relevant stakeholders. For maximum societal effect, this engagement needs to occur both within the research process and throughout the complex process of knowledge transfer. A relational engagement approach to research impact is proposed as complementary and building upon traditional approaches. Traditional approaches to impact employ bibliometric measures and focus on the creation and use of journal articles by scholarly audiences, an important but incomplete part of the academic process. The authors suggest expanding the strategies and measures of impact to include process assessments for specific stakeholders across the entire course of impact: from the creation, awareness, and use of knowledge to societal impact. This relational engagement approach involves the co-creation of research with audiences beyond academia. The authors hope to begin a dialogue on the strategies researchers can make to increase the potential societal benefits of their research.

Anthropogenic impact on diazotrophic diversity in the mangrove rhizosphere revealed by nifH pyrosequencing

Diazotrophs in the mangrove rhizosphere play a major role in providing new nitrogen to the mangrove ecosystem and their composition and activity are strongly influenced by anthropogenic activity and ecological conditions. In this study, the diversity of the diazotroph communities in the rhizosphere sediment of five tropical mangrove sites with different levels of pollution along the north and south coastline of Singapore were studied by pyrosequencing of the nifH gene. Bioinformatics analysis revealed that in all the studied locations, the diazotroph communities comprised mainly of members of the diazotrophic cluster I and cluster III. The detected cluster III diazotrophs, which were composed entirely of sulfate-reducing bacteria, were more abundant in the less polluted locations. The metabolic capacities of these diazotrophs indicate the potential for bioremediation and resiliency of the ecosystem to anthropogenic impact. In heavily polluted locations, the diazotrophic community structures were markedly different and the diversity of species was significantly reduced when compared with those in a pristine location. This, together with the increased abundance of Marinobacterium, which is a bioindicator of pollution, suggests that anthropogenic activity has a negative impact on the genetic diversity of diazotrophs in the mangrove rhizosphere.

Optimisation of a droplet digital PCR assay for the diagnosis of Schistosoma japonicum infection: A duplex approach with DNA binding dye chemistry

Schistosomiasis is a chronically debilitating helminth infection with a significant socio-economic and public health impact. Accurate diagnostics play a pivotal role in achieving current schistosomiasis control and elimination goals. However, many of the current diagnostic procedures, which rely on detection of schistosome eggs, have major limitations including lack of accuracy and the inability to detect pre-patent infections. DNA-based detection methods provide a viable alternative to the current tests commonly used for schistosomiasis diagnosis. Here we describe the optimisation of a novel droplet digital PCR (ddPCR) duplex assay for the diagnosis of Schistosoma japonicum infection which provides improved detection sensitivity and specificity. The assay involves the amplification of two specific and abundant target gene sequences in S. japonicum; a retrotransposon (SjR2) and a portion of a mitochondrial gene (nad1). The assay detected target sequences in different sources of schistosome DNA isolated from adult worms, schistosomules and eggs, and exhibits a high level of specificity, thereby representing an ideal tool for the detection of low levels of parasite DNA in different clinical samples including parasite cell free DNA in the host circulation and other bodily fluids. Moreover, being quantitative, the assay can be used to determine parasite infection intensity and, could provide an important tool for the detection of low intensity infections in low prevalence schistosomiasis-endemic areas.

Spin and spatial dynamics in electron-impact scattering off S-wave He using R-matrix with Time-Dependence theory

R-matrix with time-dependence theory is applied to electron-impact ionisation processes for He in the S-wave model. Cross sections for electron-impact excitation, ionisation and ionisation with excitation for impact energies between 25 and 225 eV are in excellent agreement with benchmark cross sections. Ultra-fast dynamics induced by a scattering event is observed through time-dependent signatures associated with autoionisation from doubly excited states. Further insight into dynamics can be obtained through examination of the spin components of the time-dependent wavefunction.

Three-dimensional simulations of gravitationally confined detonations compared to observations of SN 1991T

The gravitationally confined detonation (GCD) model has been proposed as a possible explosion mechanism for Type Ia supernovae in the single-degenerate evolution channel. It starts with ignition of a deflagration in a single off-centre bubble in a near-Chandrasekhar-mass white dwarf. Driven by buoyancy, the deflagration flame rises in a narrow cone towards the surface. For the most part, the main component of the flow of the expanding ashes remains radial, but upon reaching the outer, low-pressure layers of the white dwarf, an additional lateral component develops. This causes the deflagration ashes to converge again at the opposite side, where the compression heats fuel and a detonation may be launched. We first performed five three-dimensional hydrodynamic simulations of the deflagration phase in 1.4 M⊙ carbon/oxygen white dwarfs at intermediate-resolution (2563computational zones). We confirm that the closer the initial deflagration is ignited to the centre, the slower the buoyant rise and the longer the deflagration ashes takes to break out and close in on the opposite pole to collide. To test the GCD explosion model, we then performed a high-resolution (5123 computational zones) simulation for a model with an ignition spot offset near the upper limit of what is still justifiable, 200 km. This high-resolution simulation met our deliberately optimistic detonation criteria, and we initiated a detonation. The detonation burned through the white dwarf and led to its complete disruption. For this model, we determined detailed nucleosynthetic yields by post-processing 106 tracer particles with a 384 nuclide reaction network, and we present multi-band light curves and time-dependent optical spectra. We find that our synthetic observables show a prominent viewing-angle sensitivity in ultraviolet and blue wavelength bands, which contradicts observed SNe Ia. The strong dependence on the viewing angle is caused by the asymmetric distribution of the deflagration ashes in the outer ejecta layers. Finally, we compared our model to SN 1991T. The overall flux level of the model is slightly too low, and the model predicts pre-maximum light spectral features due to Ca, S, and Si that are too strong. Furthermore, the model chemical abundance stratification qualitatively disagrees with recent abundance tomography results in two key areas: our model lacks low-velocity stable Fe and instead has copious amounts of high-velocity 56Ni and stable Fe. We therefore do not find good agreement of the model with SN 1991T.

A Microbial Link to Weathering of Postglacial Rocks and Sediments, Mount Viso Area, Western Alps, Demonstrated through Analysis of a Soil/Paleosol Bio/Chronosequence

Understanding the mechanism associated with rates of weathering and evolution of rocks→sediment→soil→paleosol in alpine environments raises questions related to the impact of microbial mediation versus various diverse abiotic chemical/physical processes, even including the overall effect of cosmic impact/airburst during the early stage of weathering in Late Glacial (LG) deposits. This study is of a chronosequence of soils/paleosols, with an age range that spans the post–Little Ice Age (post-LIA; <150 yr), the Little Ice Age (LIA; AD 1500–1850), the middle Neoglacial (∼3 ka)–Younger Dryas (YD; <12.8 ka), and the LG (<15 ka). The goal is to elicit trends in weathering, soil morphogenesis, and related eubacterial population changes over the past 13–15 k.yr. The older LG/YD paleosols in the sequence represent soil morphogenesis that started during the closing stage of Pleistocene glaciation. These are compared with undated soils of midto late Neoglacial age, the youngest of LIA and post-LIA age. All profiles formed in a uniform parentmaterial ofmetabasalt composition and in moraine, rockfall, protalus, and alluvial fan deposits. Elsewhere in Europe,North America, and Asia, the cosmic impact/airburst event at 12.8 ka often produced a distinctive, carbon-rich “black mat” layer that shows evidence of high-temperature melting. At this alpine site, older profiles of similar LG age contain scorched and melted surface sediments that are otherwise similar in composition to the youngest/thinnest profiles developing in the catchment today. Moreover, microbial analysis of the sediments offers new insight into the genesis of these sediments: the C and Cu (u = unweathered) horizons in LG profiles present at 12.8 ka (now Ah/Bw) show bacterial population structures that differ markedly from recent alluvial/protalus sample bacterial populations. We propose here that these differences are, in part, a direct consequence of the age/cosmic impact/weathering processes that have occurred in the chronosequence. Of the several questions that emerge from these sequences, perhaps the most important involve the interaction of biotic-mineral factors, which need to be understood if we are to generally fully appreciate the role played by microbes in rock weathering.

Simulations in 3D research : Can Unity3D be used to simulate a 3D display system?

Mid Sweden University is currently researching how to capture more of a scene with a camera and how to create 3D images that does not require extra equipment for the viewer. In the process of this research they have started looking into simulating some of the tests that they wish to conduct. The goal of this project is to research whether the 3D graphics engine Unity3D could be used to simulate these tests, and to what degree. To test this a simulation was designed and implemented. The simulation used a split display system where each camera is directly connected to a part of the screen and using the position of the viewer the correct part of the camera feed is shown. Some literary studies were also done into how current 3D technology works. The simulation was successfully implemented and shows that simple simulation can be done in Unity3D, however, some problems were encountered in the process. The conclusion of the project show that there is much work left before simulation is viable but that there is potential in the technology and that the research team should continue to investigate it.

Renar och vindkraft II : Vindkraft i drift och effekter på renar och renskötsel

Utbyggnaden av vindkraft inom renskötselområdet har ökat markant det senaste decenniet, trots att kunskapen om påverkan av vindkraftsetableringar ännu inte är fullt utredd och dokumenterad. I den här rapporten beskriver vi framförallt hur vindkraftparker i driftsfas påverkar renarna och renskötseln i tre olika områden. I Malå sameby har vi studerat kalvningsområdet kring Storliden och Jokkmokkslidens vindkraftparker. I Vilhelmina Norra sameby har vi studerat vinterbetesområdet kring Stor-Rotlidens vindkraftpark, samt Lögdeålandets betesområde med Gabrielsbergets vindkraftpark som används av Byrkije reinbetesdistrikt från Norge. För att få en helhetsbild av hur renarna använder sitt betesområde är det viktigt att studera renarnas betes- och förflyttningsmönster långsiktigt och över hela deras betesområde och inte bara inom det lokala området nära parken. Det är också viktigt att ta hänsyn till att renarnas betesutnyttjande skiftar från år till år och mellan olika årstider beroende på väderlek och andra yttre förutsättningar. Vi vill också understryka vikten av att kombinera den traditionella kunskapen från renskötarna med vedertagna vetenskapliga analysmetoder för att besvara de frågor som är viktiga för att kunna bedriva en hållbar renskötsel. Vi har undersökt renarnas användning av områdena genom att utföra spillningsinventeringar under åren 2009-2015 (endast i Malå sameby), och genom att följa renar utrustade med GPS-halsband under åren 2005-2015. Datat är insamlat före och under byggfas och under driftsfas (för Gabrielsberget finns GPS-data endast för driftsfasen). Vi har analyserat data genom att utveckla statistiska modeller för val av betesområde för varje område där vi har beräknat hur renarna förhåller sig till vindkraftparksområdet före, under och efter byggnation, och på Gabrielsberget när parken varit avstängd under 40 dagar och under drift vid olika renskötselsituationer. Genom intervjuer, möten och samtal, samt information från Gabrielsbergets vindkraftparks kontrollprogram, har vi tagit del av renskötarnas erfarenheter av hur renarnas beteende, och därmed även renskötseln, påverkats av vindkraftsutbyggnaden i respektive område. Våra resultat visar att renarna både på kalvnings- och på vinterbetesområden påverkas negativt av vindkraftsetableringarna (Tabell a). Renarna undviker att beta i områden där de kan se och/eller höra vindkraftsverken och föredrar att vistas i områden där vindkraftverken är skymda. I kalvningsområdet i Malå ökade användningen av skymda områden med 60 % under driftsfas. I vinterbetesområdet på Gabrielsberget, när renarna utfodrades i parken och kantbevakades intensivt för att stanna i parkområdet under driftsfas, ökade användningen av skymda områden med 13 % jämfört med när de inte var utfodrade och fick ströva mer fritt. Resultaten visar också att renarna minskar sin användning av området nära vindkraftparkerna. I kalvningslandet i Malå minskar renarna sin användning av områden inom 5 km från parkerna med 16-20 %. Vintertid vid Gabrielsbergets vindkraftpark undvek renarna parken med 3 km. Våra resultat visar även att renarnas betesro minskar inom en radie på 4 km från vindkraftparkerna under kalvningsperioden och tiden därefter i jämförelse med perioden före byggfas. Exakta avstånd som renarna påverkas beror på förutsättningarna i respektive område, exempelvis hur topografin ser ut eller om området är begränsat av stängsel eller annan infrastruktur. Förändringarna i habitatutnyttjande i våra studieområden blev tydligare när parkerna var centralt belägna i renarnas betesområde, som i kalvningsområdet i Malå eller i vinterbeteslandet på Gabrielsberget, medan det inte var lika tydliga effekter kring Stor-Rotlidens park, som ligger i utkanten av ett huvudbetesområde. Oftast är snöförhållandena bättre ur betessynpunkt högre upp i terrängen än nere i dalgångarna, på grund av stabilare temperatur, vind som blåser bort snötäcket och mer variation i topografin. Därför kan etablering av vindkraftparker i höglänta områden försämra möjligheten att använda sådana viktiga reservbetesområden under vintrar med i övrigt dåliga snöförhållanden, vilka blir allt vanligare i och med klimatförändringarna. Våra resultat tyder inte direkt på att renarna påverkats negativt under dåliga betesvintrar men fler år av studier behövs för att ytterligare klargöra hur vindkraft påverkar renarna under dessa vintrar. Våra studier har visat att etablering av vindkraft har konsekvenser för renskötseln under både barmarkssäsongen och under vintern, men effekterna förmodas få störst inverkan inom vinterbetesområdet där det är svårt att hitta alternativa betesområden för renarna. Under sommaren är betestillgången oftast mindre begränsad och renarna kan lättare hitta alternativa områden. En direkt konsekvens av Gabrielsbergets vindkraftpark som är placerad mitt i ett vinterbetesområde har blivit att renarna behöver tillskottsutfodras och bevakas intensivare för att de inte ska gå ut ur området. När den naturliga vandringen mellan olika betesområden störs för att renarna undviker att vistas i ett område kan det leda till att den totala tillgången till naturligt bete minskar och att man permanent måste tillskottsutfodra, alternativt minska antalet renar. Annan infrastruktur som vägar och kraftledningar påverkar också renarna. Vid Storliden och Jokkmokksliden och vid Stor-Rotliden där data samlats in innan vindkraftparken uppfördes visar våra resultat att renarna undviker de omkringliggande landsvägarna redan innan parkerna etablerades. Vid Stor-Rotliden ökar dock renarna användningen av områden nära vägarna efter att parken är byggd. På Gabrielsberget, där vi endast har data under drifttiden, är renarna närmare vägarna (även stora vägar som E4) när renskötarna minskar på kantbevakningen för att inte hålla renarna nära parken. Detta ökar naturligtvis risken för trafikolyckor och innebär att renskötarna måste bevaka dessa områden intensivare. Sist i rapporten presenterar vi förslag till åtgärder som kan användas för att underlätta arbetet för renskötseln om det är så att en vindkraftpark redan är byggd. Några exempel på åtgärder som är direkt kopplat till parken är att stänga av vägarna in i vindkraftparken för att förhindra nöjeskörning med skoter och bil under den tiden renarna vistas i området samt tät dialog mellan vindkraftsbolag och sameby angående vinterväghållningen av vägarna till och inom vindkraftparken. Andra mer regionala åtgärder för att förbättra förutsättningarna för renskötselarbetet på andra platser för samebyn, kan vara att sätta stängsel längst större vägar och järnvägar (t.ex. E4:an eller stambanan) i kombination med strategiskt utplacerade ekodukter. Detta för att underlätta och återställa möjligheterna till renarnas fria strövning och renskötarnas flytt av renar mellan olika betesområden.   

Development of a model to predict the life of pneumatic conveyor bends subject to erosive wear

The erosion processes resulting from flow of fluids (gas-solid or liquid-solid) are encountered in nature and many industrial processes. The common feature of these erosion processes is the interaction of the fluid (particle) with its boundary thus resulting in the loss of material from the surface. This type of erosion in detrimental to the equipment used in pneumatic conveying systems. The puncture of pneumatic conveyor bends in industry causes several problems. Some of which are: (1) Escape of the conveyed product causing health and dust hazard; (2) Repairing and cleaning up after punctures necessitates shutting down conveyors, which will affect the operation of the plant, thus reducing profitability. The most common occurrence of process failure in pneumatic conveying systems is when pipe sections at the bends wear away and puncture. The reason for this is particles of varying speed, shape, size and material properties strike the bend wall with greater intensity than in straight sections of the pipe. Currently available models for predicting the lifetime of bends are inaccurate (over predict by 80%. The provision of an accurate predictive method would lead to improvements in the structure of the planned maintenance programmes of processes, thus reducing unplanned shutdowns and ultimately the downtime costs associated with these unplanned shutdowns. This is the main motivation behind the current research. The paper reports on two aspects of the first phases of the study-undertaken for the current project. These are (1) Development and implementation; and (2) Testing of the modelling environment. The model framework encompasses Computational Fluid Dynamics (CFD) related engineering tools, based on Eulerian (gas) and Lagrangian (particle) approaches to represent the two distinct conveyed phases, to predict the lifetime of conveyor bends. The method attempts to account for the effect of erosion on the pipe wall via particle impacts, taking into account the angle of attack, impact velocity, shape/size and material properties of the wall and conveyed material, within a CFD framework. Only a handful of researchers use CFD as the basis of predicting the particle motion, see for example [1-4] . It is hoped that this would lead to more realistic predictions of the wear profile. Results, for two, three-dimensional test cases using the commercially available CFD PHOENICS are presented. These are reported in relation to the impact intensity and sensitivity to the inlet particle distributions.

The use of motivational interviews by nurses to promote health behaviors in adolescents: a scoping review protocol

Adolescents - defined as young people between 10 and 19 years of age1 - are, in general, a relatively healthy segment of the population.2 However, the developmental changes that take place during adolescence may affect their subsequent risk for diseases and for a variety of health-related behaviors. In fact, early onset of preventable health problems (e.g. obesity, malnutrition, STDs) and the engagement in health risk behaviors (e.g., sedentary life style, excessive alcohol consumption, unprotected sex) during adolescence, are likely to put them at greater risk for physical and mental health problems at a later stage in life. Moreover, health related problems and health risk behaviors may disrupt adolescents' physical and cognitive development and therefore may affect their ability to think and act in relation to decisions about their health in the future.1 In summary, health-related behaviors in adolescence, apart from their influence on the continuum of "health-disease", they also have the potential to influence future behaviors. In fact, several studies have shown that past behaviors are good predictors of future behaviors .3,4 Thus, promoting healthy practices during adolescence and taking measures to better protect young people from health risks are essential for the prevention of health problems in adulthood.5 According to the World Health Organization, the main problems affecting young people include mental health problems (such as behavioral disorders, eating disorders, suicide, anxiety or depression), the use of substances (illegal substances, alcohol and tobacco), interpersonal violence, nutrition (a proper nutrition consists of healthy eating habits and physical exercise), unintentional injuries (which are a leading cause of death and disability among young people, with road traffic injuries accounting for about 700 deaths per day), sexual and reproductive health (for example, risky sexual behaviors, early pregnancy and childbirth) and HIV (resulting from sexual transmission and drug injection).5,6 On the other hand, the number of children and youth with chronic health conditions has increased dramatically in the past four decades7 as larger numbers of chronically ill children survive beyond the age of 10.8 Despite the lack of data on adolescents' health making it difficult to determine the prevalence of chronic illnesses in this age group9, it is known that one in ten adolescents suffers from a chronic condition worldwide.10 In fact, national population based studies from Western countries show that 20-30% of teenagers have a chronic illness, defined as one that lasts longer than six months.8 The most prevalent chronic illness among adolescents is asthma and the one with the highest incidence is diabetes mellitus, particularly type II.9 Traditionally, healthcare professionals have been mainly investing in health education activities, through the transmission of knowledge with a view to creating habits, customs and behaviors, and promoting healthy lifestyles. However, empowering people does not only consist of giving them the right information11 , i.e. good information is not enough to cause people to make changes.12 The motivation or desire to change unhealthy behaviors and habits depends on many factors, namely intrinsic motivation, control over personal decisions, self-confidence and perception of effectiveness, personal ambivalence, and individualized assistance.12 Many professionals assume that supplying knowledge is sufficient for behavioral changes; however, even very good advice often fails to generate behavioral change. After all, people continue to engage in unhealthy behaviors despite clearly knowing what they should do and how to change. "What is lacking is the motivation to apply that knowledge".13, p.1233 In fact, behavioral change is a complex phenomenon with multiple determinants that also includes motivational variables. It is associated with ambivalent processes expressed in the dilemma between keeping the current status and moving on to new ways of acting. For example, telling adolescents that if they keep on engaging in a certain behavior, they are increasing the risk of developing a long-term condition such as cardiovascular disease, stroke or diabetes is rarely enough to trigger the desired behavioral change; people are more likely to change when they believe that the change is really effective and that they are able to implement it.12 Therefore, it is essential to provide specific training for "healthcare professionals to master motivational techniques, avoid confrontation with the users, and facilitate behavioral changes".14 In this context, motivating patients to make behavioral changes is also an important nursing task where change in lifestyle is a major element of patients' treatment and preventive interventions.15 One of the nurse's goals is to help improve a patient's health or help them to manage existing health conditions. Once nurses are in a position where they have to focus on accomplishing tasks and telling patients what needs to be accomplished16, the role of the nurse is expanding even more into the use of motivational strategies.17 MI is bringing nurses back to therapeutic communication and moving them closer to successful health promotion and disease management, by promoting behavior change and empowering their patients. As the nursing profession evolves, MI is seen as a challenge and the basis of nurse's interactions with individuals, families and communities.16, 17 In the same way, MI may be taken as an essential tool in the provision of nursing care to adolescents, being itself a workspace with possible therapeutic effects regarding problems, clarification of doubts, and development of skills.18 In fact, MI may be particularly applicable in work with adolescents because of their specific developmental stage. Adolescents attempt to establish their own autonomy and identity while struggling with social interactions and moral issues, which leads to ambivalence.19 Consistent with the developmental challenges during adolescence, "MI explicitly honors autonomy, people's right and irrevocable ability to decide about their own behavior"20 while allowing the person to explore possibilities for change of risky or maladaptive behaviours.19 MI can be defined as a directive, client-centred counselling style for eliciting behavior change by helping clients to explore and resolve ambivalence. It is most centrally defined not by technique but by its spirit as a facilitative style of interpersonal relationship.21 It is a set of strategies and techniques widely used in clinical practice based on the transtheoretical model of change. The Stages of Change model describes five stages of readiness—precontemplation, contemplation, preparation, action, and maintenance—and provides a framework for understanding behavior change.22 The MI has been widely tested and applied in different areas, such as modification of addictive behaviors, interventions with offenders in the context of justice, eating disorders, promotion of therapeutic adherence among chronic patients, promotion of learning in school settings or intervention with adolescents at risk.18,23 In general, clinical practice has been adopting the perspective of motivation as something relatively immutable, i.e., the adolescent is either motivated for change/treatment and, in these conditions, the professional's role is to help him/her, or the adolescent is not motivated and then change/treatment is not feasible. Alternatively the theoretical model underlying the MI technique postulates that the individual's adherence to change/treatment depends on his/her motivation, which can change throughout the therapeutic intervention. As several studies found positive results for effects of MI24-26 and its use by health professionals is encouraged23,27 nurses may play an important role in patients' process of change. As nurses have a crucial role in clinical contexts, they can facilitate the process of ending risk behaviors and/or adopting positive health behaviors through some motivational techniques, namely with adolescents. A considerable number of systematic reviews about MI already exist pointing to some benefits of its use in the treatment of a broad range of behavioral problems and diseases.13,28,29 Some of the current reviews focus on examining the effectiveness of MI for adolescents with diverse health risks/problems 30-32. However, to date there are no reviews that present and assess the evidence for the use of nurse-led MI in adolescents. Therefore, we have little knowledge of what works for whom (which adolescent subpopulation) under what circumstances (in which setting, for what problem) in relation to motivational interviewing by nurses. There is a clear need for scoping or mapping the use of MI by nurses with adolescents to identify evidence gaps and to inform opportunities for future development in nursing practice. On the other hand, information regarding nurse-led implemented and evaluated interventions, techniques and/or strategies used, contexts of application and adolescents subpopulation groups is dispersed in the literature33-36 which impedes the formulation of precise questions about the effectiveness of those interventions conducted by nurses and therefore the realization of a systematic review. In other words, it is known that different kind of motivational interventions have been implemented in different contexts by nurses, however does not exist a map about all the motivational techniques and/or strategies used. Furthermore the literature does not clarify which is the role of nurses at cross professional motivational intervention implemented programs and finally the outcomes and evaluation of interventions are unclear. Thus, the practical implication of this mapping will be clarifying all these aspects. Without this clarification is not possible to proceed to the realization of a systematic review about the effectiveness of the use of motivational interviews by nurses to promote health behaviors in adolescents, in a particular context and/or health risk behavior; or regarding the effectiveness of certain technique and/or strategy of MI. Consequently, there are important questions about the nature of the evidence in this area that need to be answered before formulating a precise question of effectiveness. This scoping review aims to respond to these questions. An initial search of the JBI Database of Systematic Reviews & Implementation Reports, Cochrane Database of Systematic Reviews, , Database of promoting health effectiveness reviews (DoPHER), The Campbell Library, Medline and CINAHL, has revealed that currently there is no Scoping Review (published or in progress) on the subject. In this context, this scoping review will examine and map the published and unpublished research around the use of MI by nurses implemented and evaluated to promote health behaviors in adolescents; to establish its current extent, range and nature and identify its feasibility, outcomes and gaps in the evidence defining research priorities in this field. This scoping review will be informed by the JBI methodology37 that suggests a five stage methodological framework for conducting scoping reviews which includes: identifying the research question, searching for relevant studies, selecting studies, charting data, collating, summarizing and reporting the results.

Corrosion protection of PVD and paint coatings for selective solar absorber surfaces

The selective solar absorber surface is a fundamental part of a solar thermal collector, as it is responsible for the solar radiation absorption and for reduction of radiation heat losses. The surface’s optical properties, the solar absorption (á) and the emittance (å), have great impact on the solar thermal collector efficiency. In this work, two coatings types were studied: coatings obtained by physical vapor deposition (PVDs) and coatings obtained by projection with different paints (PCs) on aluminum substrates. The most common industrial high performing solar selective absorbers are nowadays produced by vacuum deposition methods, showing some disadvantages, such as lower durability, lower resistance to corrosion, adhesion and scratch, higher cost and complex production techniques. Currently, spectrally selective paints are a potential alternative for absorbing surfaces in low temperature applications, with attractive features such as ease of processing, durability and commercial availability with low cost. Solar absorber surfaces were submitted to accelerated ageing tests, specified in ISO 22975-3. This standard is applicable to the evaluation of the long term behavior and service life of selective solar absorbers for solar collectors working under typical domestic hot water system conditions. The studied coatings have, in the case of PVDs solar absorptions between 0.93 and 0.96 and emittance between 0.07 and 0.10, and in the case of PCs, solar absorptions between 0.91 and 0.93 and emittance between 0.40 and 0.60. In addition to evaluating long term behavior based on artificial ageing tests, it is also important to know the degradation mechanism of different coatings that are currently in the market. Electrochemical impedance spectroscopy (EIS) allows for the assessment of mechanistic information concerning the degradation processes, providing quantitative data as output, which can easily relate to the kinetic parameters of the system. EIS measures were carried out on Gamry FAS2 Femostat coupled with a PCL4 Controller. Two electrolytes were used, 0.5 M NaCl and 0.5 M Na2SO4, and the surfaces were tested at different immersion times up to 4 weeks. The following types of specimens have been tested: Aluminium with/without surface treatment, 3 selective paint coatings (one with a poly(urethane) binder and two with silicone binders) and 2 PVD coatings. Based on the behaviour of the specimens throughout the 4 weeks of immersion, it is possible to conclude that the coating showing the best protective properties corresponds to the selective paint coating with a polyurethane resin followed by the other paint coatings, whereas both the PVD coatings do not confer any protection to the substrate, having a deleterious effect as compared to the untreated aluminium reference.