982 resultados para Monasterio de Poblet (Cervera)
Resumo:
port. con esc. xil.
Resumo:
Mención de responsabilidad tomada de preliminares
Resumo:
Sign.: []2, A-C4
Resumo:
Sign. : [A]2, B6
Resumo:
El pie de imp. consta en colofón
Resumo:
La producción de Josep Estevan i Cervera ,en solitario, está comprendida entre 1776 y 1806
Resumo:
This work presents a single stage converter for a high bandwidth and a high efficiency envelope amplifier. The current ripple cancellation technique is applied to a synchronous buck converter to cancel the output current ripple and to decrease the switching frequency without a reduction in the large signal bandwidth. The converter is modeled and the new design with ripple cancellation circuit is detailed. The advantages of the proposed design are presented and validated experimentally. The transfer function of the output filter of the buck converter with ripple cancellation circuit has been modeled and compared to measurements, showing a good correspondence. Experimental validation is provided at 4MHz of switching frequency for DC and variable output voltage for a sinusoidal and a 64QAM signal. Additional experimental validation of the efficiency improvement is provided, compared to the equivalent design (same bandwidth and output voltage ripple) of the conventional buck converter.
Resumo:
This work is related to the output impedance improvement of a Multiphase Buck converter with Peak Current Mode Control (PCMC) by means of introducing an additional power path that virtually increases the output capacitance during transients. Various solutions that can be employed to improve the dynamic behavior of the converter system exist, but nearly all solutions are developed for a Single Phase Buck converter with Voltage Mode Control (VMC), while in the VRM applications, due to the high currents, the system is usually implemented as a Multiphase Buck Converter with Current Mode Control. The Output Impedance Correction Circuit (OICC) is used to inject or extract a current n-1 times larger than the output capacitor current, thus virtually increasing n times the value of the output capacitance during the transients. Furthermore, this work extends the OICC concept to a Multiphase Buck Converter system while comparing proposed solution with the system that has n times bigger output capacitor. In addition, the OICC is implemented as a Synchronous Buck Converter with PCMC, thus reducing its influence on the system efficiency
Resumo:
En este artículo se presenta la fuente de alimentación que se está diseñando para alimentar los imanes superconductores del acelerador de partículas europeo XFEL que se está construyendo en Hamburgo, cuyas características le hacen el más avanzado del mundo. Un imán superconductor es una carga muy inductiva que debe ser controlada en corriente y que presenta una caída de tensión muy baja cuando está en modo superconductor. La fuente debe ser capaz de alimentar esta carga con una alta fiabilidad e incorporar varias protecciones que protejan esta carga tan especial.
Resumo:
Actualmente, diversos terremotos han puesto de manifiesto la importancia de planificar las ciudades y la gran influencia que tiene el comportamiento de los edificios como consecuencia de los resultados de pérdidas humanas y económicas. Ante la imposibilidad de evitar la ocurrencia de terremotos y de predecirlos con un margen pequeño de tiempo para tomar acciones a corto plazo, la reducción de la vulnerabilidad de los elementos expuestos es la medida más eficaz para prevenir los daños y para evitar el desastre. Existen varios estudios anteriores de Norman B. Green (1980), Teresa Guevara López (2009 y 2012) que recogen criterios ya generalizados dentro de la bibliografía sísmica y algunos aspectos procedentes de norma sísmicas precursoras en este campo (por ejemplo, las peruanas) para establecer inicialmente unos principios urbanístico-sísmicos. Además, varios proyectos relacionados con el riesgo sísmico, RisK-Ue (2003), SERAMAR (Lars Abrahamczyk et al., 2013) han desarrollado metodologías que clasifican la vulnerabilidad de los edificios teniendo en cuenta modificadores por comportamientos y configuraciones irregulares sísmicamente. El presente trabajo desarrolla una metodología empírica para identificar y caracterizar los parámetros urbanísticos que determinan una respuesta sísmica irregular de las edificaciones, graduar su relación con el daño tras un terremoto y poder así disminuir la vulnerabilidad sísmica de las ciudades. La metodología desarrollada en esta tesis doctoral se aplica en la ciudad de Lorca, Región de Murcia. Se realiza un trabajo de campo donde se clasifican los edificios según su tipología estructural y sus parámetros urbanísticos. A través de un estudio estadístico se analiza la correlación con el daño de las edificaciones tras el terremoto del 11 de mayo de 2011. Previamente se ha hecho una clasificación de los edificios según la clase de suelo en la que se encuentran según el Eurocódigo8 (Navarro et al, 2012). Por último, se aplica la metodología para obtener una estimación de la habitabilidad de los edificios en Lorca post sismo. Para esta clasificación se ha adoptado el criterio recogido en diversas recomendaciones internacionales, la mayoría de las cuales se basan en la documentación generada por el ATC- Applied Technology Council, distinguiendo entre edificios habitables (no daño-daño no estructural) y edificios no habitables (daño estructural). ABSTRACT Currently, various earthquakes have made clear first, the importance of city planning and secondly, the great influence that has the behaviour of buildings as a consequence of the results of human and economic losses. Faced with the impossibility of avoiding the occurrence of earthquakes and predicting its with a small margin of time to take action in the short term, the reduction of the vulnerability of exposed elements is the most effective measure to prevent damage and to prevent the disaster. There are several previous studies, Norman B. Green (1980), Teresa Guevara López (2009-2012) collecting criteria already widespread within the seismic bibliography and we can find some aspects from standard seismic precursor in this field (for example, the Peruvian) to initially establish urban - seismic principles. In addition, several projects related to seismic risk, RisK-EU (2003), SERAMAR (Lars Abrahamczyk et al., 2013) have developed methodologies that classify the vulnerability of buildings taking into account modifiers for behaviours and irregular configurations in seismical terms. This paper develops an empirical methodology to identify and characterize the irregular urban parameters seismically, graduate its relationship with the building damages after an earthquake and thus reduce the seismic vulnerability of cities. The methodology developed in this thesis applies in the city of Lorca, Region of Murcia. Fieldwork where buildings are classified according to their structural type and its urban performance parameters. Through a statistical study the correlation with damage of buildings is analyzed after the earthquake of May 11, 2011. Previously a classification of the buildings has been made according to the kind of soil according to the Eurocodigo 8 (Navarro et al, 2012). Finally, you get an estimate of the building habitability in Lorca. As a result, this classification adopted the criterion contained in various international recommendations, most of which are based on the documentation published by the ATC - Applied Technology Council, habitable buildings (not damage -damage non-structural) and non habitable buildings (structural damage).
Resumo:
tít. tomado del comienzo del texto
Resumo:
Índice
Resumo:
Contiene: Epitome de los motiuos juridicos que assistieron a la Curia Eclesiastica de Barcelona para resistirse a firmar la contencion que le propuso la Real Audiencia a instancia de la ... abadesa de S. Pedro de las Puellas de la misma ciudad
Resumo:
Contiene una poesia a doble columna al final
Resumo:
Apellido del autor tomado de la Enciclopedia del Reino de Valencia y la Enciclopedia Valenciana