Lattice boltzmann modeling of fluid flow to determine the permeability of a karst specimen

A limestone sample was scanned using computed tomography (CT) and the hydraulic conductivity of the 3D reconstructed sample was determined using Lattice- Boltzmann methods (LBM) at varying scales. Due to the shape and size of the original sample, it was challenging to obtain a consistent rectilinear test sample. Through visual inspection however, 91 mm and 76 mm samples were digitally cut from the original. The samples had porosities of 58% and 64% and produced hydraulic conductivity values of K= 13.5 m/s and K=34.5 m/s, respectively. Both of these samples were re-sampled to 1/8 and 1/64 of their original size to produce new virtual samples at lower resolutions of 0.542 mm/lu and 1.084 mm/lu, while still representing the same physical dimensions. The hydraulic conductivity tended to increase slightly as the resolution became coarser. In order to determine an REV, the 91 mm sample was also sub-sampled into blocks that were 1/8 and 1/64 the size of the original. The results were consistent with analytical expectations such as those produced by the Kozeny-Carman equation. A definitive REV size was not reached, however, indicating the need for a larger sample. The methods described here demonstrate the ability of LBM to test rock structures and sizes not normally attainable.

Leaf Functional Traits and Forest Structure of Tropical Dry Forest Species Along a Rainfall Gradient in Florida and Puerto Rico

This study examined how different rainfall regimes affect a set of leaf functional traits related to plant stress and forest structure in tropical dry forest (TDF) species on limestone substrate. One hundred fifty eight individuals of four tree species were sampled in six ecological sites in south Florida and Puerto Rico, ranging in mean annual rainfall from 858 to 1933 mm yr-1. Leaf nitrogen content, specific leaf area (SLA), and N:P ratio of evergreen species, but not deciduous species, responded positively to increasing rainfall. Phosphorus content was unaffected in both groups. Canopy height and basal area reached maxima of 10.3 m and 31.4 m2 ha-1, respectively, at 1168 mm annual rainfall. Leaf traits reflected soil properties only to a small extent. This led us to the conclusion that water is a major limiting factor in TDF and some species that comprise TDF ecosystems are limited by nitrogen in limestone sites with less than ~1012 mm rainfall, but organismal, biological and/or abiotic forces other than rainfall control forest structure in moister sites.

Annotated record of the detailed examination of Mn deposits from the R/V Rig Seismic Cruise 11 (BMR 66) in 1986 over the Great Australian Bight Basin area

Late Cretaceous and younger sediments dredged from the upper continental slope and canyon walls in the Great Australian Bight Basin between 126° and 136°E broadly confirm the stratigraphy which had been established previously from scattered exploration wells. Late Cretaceous to Early Eocene marine and marginal marine terrigenous sediments are overlain by Middle Eocene and younger pelagic carbonate (fine limestone and calcareous ooze). The samples provide the first evidence of truly marine Maastrichtian sedimentation, with abundant calcareous nannoplankton, on the southern margin of the continent. Other samples of interest include Precambrian sheared granodiorite on the upper slope south of Eyre Terrace, Paleocene phosphatic sediment in 'Eucla' Canyon at 128° 30'E, and terrigenous Early Miocene mudstone at 133° 20' and 134° 50'E. The mudstone is of note as an exception to the uniform pelagic carbonate wackestone and ooze which characterise Middle Eocene and younger sedimentation at all other sites. Fragments of alkali basalt lava of unknown age were recovered in 'Eucla' Canyon. Cores are mostly pelagic calcareous ooze, but those from submarine canyons include terrigenous turbidites.

Distribution of Upper Cretaceous deep water agglutinated foraminifera in sediments of the North Atlantic and its marginal seas (Tab. 1)

The stratigraphic and biogeographic distribution of more than 170 species of deep-water agglutinated benthic foraminifers (DWAF) from the North Atlantic and adjacent marginal seas has been compared with paleoenvironmental data (e.g. paleobathymetry, oxygenation of the bottom waters, amount of terrigenous input and substrate disturbance). Six general types of assemblages, in which deep water agglutinated taxa occur, are defined from the Turonian to Maastrichtian times: 1. High latitude slope assemblages 2. Low to mid latitude slope assemblages 3. Flysch-type assemblages 4. Deep water limestone assemblages (,,Scaglia,,-type) 5. Abyssal mixed calcareous-agglutinated assemblages 6. Abyssal purely agglutinated assemblages Latitudinal differences in faunal composition are observed, the most important of which is the lack or extreme paucity of calcareous forms in high latitude assemblages. East-to-west differences appear to be of comparatively minor importance. Most DWAF species occur in all studied regions and are thus considered as cosmopolitan. Biostratigraphic turnovers in the taxonomic content of assemblages are observed in the lowermost Turonian, mid-Campanian and in the upper Maastrichtian to lowermost Paleocene. These datum levels correspond to inter-regional and time-constant paleooceanographic events, which probably also affected the deep-water benthic biota. This allows us to use deep-water agglutinated foraminifers for biostratigraphy in the North Atlantic sequences deposited below CCD and to geographically extend the currently used zonal schemes which have been established in the Carpathian and Alpine areas.

Mineralogy and petrology of Black Sea Basin sediments

The origin and modes of transportation and deposition of inorganic sedimentary material of the Black Sea were studied in approximately 60 piston, gravity, and Kasten cores. The investigation showed that the sediment derived from the north and northwest (especially from the Danube) has a low calcite-dolomite ratio and a high quartz-feldspar ratio. Rock fragments are generally not abundant; garnet is the principal heavy mineral and illite is the predominant clay mineral. This sedimentary material differs markedly from that carried by Anatolian rivers, which is characterized by a high calcite-dolomite ratio and a low quartz-feldspar ratio. Rock fragments are abundant; pyroxene is the principal heavy mineral and montmorillonite is the predominant clay mineral. In generel, the clay fraction is large in all sediments (27.6-86.9 percent), and the lateral distributian indicates an increase in clay consent from the coasts toward two centers in the western and eastern Black Sea basin. Illite is the most common clay mineral in the Black Sea sediments. The lateral changes in composition of the clay mineral can easily be traced to the petrologic character of northern (rich in illite) and southern (rich in montmorillonite) source areas. In almost all cores, a rhythmic change of the montmorillonite-illite ratio with depth was observed. These changes may be related to the changing influence of the two provinces during the Holocene and late Pleistocene. Higher montmorillonite content seems to indicate climctic changes, probably stages of glaciation end permafrost in the northern area, at which time the illite supply was diminished to a large extent. The composition of the sand fraction is relatad to the different petrologic and morphologic characteristics of two major source provimces: (1) a northern province (rich in quartz, feldspars, and garnet) characterized by a low elevation, comprising the Danube basin area and the rivers draining the Russian platform; and (2) a southern province (rich in pyroxene and volcanic and metamorphic rocks) in the mountainous region of Anatolia and the Caucasus, characterized by small but extremely erosive rivers. The textural properties (graded bedding) of the deep-sea send layers clearly suggest deposition from turbidity currents. The carbonate content of the contemporary sediments ranges from 5 to 65 percent. It increases from the coast to a maximum in two centers in the western and eastern basin. This pattern reflects the distribution of the <2-µm fraction. The contemporary mud sedimentation is governed by two important factors: (1) the deposition of terrigenous allochthonous material of low carbonate content originating from the surrounding hinterland (northern and southern source areas), and (2) the autochthonous production of large quantities of biogenic calcite by coccolithophores during the last period of about 3,000-4,000 years.

(Table 3) Reduced inorganic sulphur, d34S and nickel content of ODP Leg 165 sites

Leg 165 of the Ocean Drilling Program afforded a unique opportunity to investigate organic and inorganic geochemistry across a wide gradient of sediment compositions and corresponding chemical pathways. The solid fractions at Sites 998, 999, 1000, and 1001 reveal varying proportions of reactive carbonate species, a labile volcanic ash fraction occurring in discrete layers and as a dispersed component, and detrital fluxes that derive from continental weathering. The relative proportions and reactivities of these end-members strongly dictate the character of the diagenetic profiles observed during the pore-water work of Leg 165. In addition, alteration of the well-characterized basaltic basement at Site 1001 has provided a strong signal that is reflected in many of the dissolved components. The relative effects of basement alteration and diagenesis within the sediment column are discussed in terms of downcore relationships for dissolved calcium and magnesium. With the exception of Site 1002 in the Cariaco Basin, the sediments encountered during Leg 165 were uniformly deficient in organic carbon (typically <0.1 wt%). Consequently, rates of organic oxidation were generally low and dominated by suboxic pathways with subordinate levels of bacterial sulfate reduction and methanogenesis. The low rates of organic remineralization are supported by modeled rates of sulfate reduction. Site 1000 provided an exception to the generally low levels of microbially mediated redox cycling. At this site the sediment is slightly more enriched in organic phases, and externally derived thermogenic hydrocarbons appear to aid in driving enhanced levels of redox diagenesis at great depths below the seafloor. The entrapment of these volatiles corresponds with a permeability seal defined by a pronounced Miocene minimum in calcium carbonate concentration recognized throughout the basin and with a dramatic downcore increase in the magnitude of limestone lithification. The latter has been tentatively linked to increases in alkalinity associated with microbial oxidation of organic matter and gaseous hydrocarbons. Recognition and quantification of previously unconstrained large volumes and frequencies of Eocene and Miocene silicic volcanic ash within the Caribbean Basin is one of the major findings of Leg 165. High frequencies of volcanic ash layers manifest as varied but often dominant controls on pore-water chemistry. Sulfur isotope results are presented that speak to secondary metal and sulfur enrichments observed in ash layers sampled during Leg 165. Ultimately, a better mechanistic understanding of these processes and the extent to which they have varied spatially and temporally may bear on the global mass balances for a range of major and minor dissolved components of seawater.

(Table 2) Terrigenous, authigenic and biogenic composition of sediments at DSDP Hole 93-603B

Pelagic sedimentation during the Early Cretaceous at Site 603 produced alternations of laminated marly limestone and bioturbated limestone-a facies typical of the "Blake-Bahama Formation" of the western Atlantic. This limestone is a nannofossil micrite, rich in calcified radiolarians, with variable amounts of organic matter, pyritized radiolarian tests, fish debris, and micaceous silt. The laminated marly limestone layers are enriched in organic matter when compared with the intervals of bioturbated limestone. The organic carbon is predominantly terrestrial plant debris; where the organic-carbon content is in excess of 1%, there is also a significant marine-derived component. Laminations can result either from bands of alternately enriched and depleted opaque material and clay, or from bands of elongate lenses (microflasers) of micrite, which could be plastically deformed pellets or diagenetic features. The alternating intervals of laminated and bioturbated structures may have resulted from combined changes in surface productivity, in the influx of terrigenous organic matter, and in the intensity of bottom circulation, which led to episodic oxygen depletion in the bottom water and sediments. Variations in the relative proportions of laminated clay-rich and bioturbated lime-rich limestone and in the development of cycles between these structures make it possible to subdivide the Lower Cretaceous pelagic facies into several subunits which appear to be regional in extent. Bioturbated limestone is dominant in the Berriasian, laminated marly limestone in the Valanginian and Barremian-lower Aptian, and well-developed alternations between these end members in the Hauterivian. The Hauterivian to lower Aptian sediments contain abundant terrigenous clastic turbidites associated with a submarine fan complex. These changes in the general characteristics of the pelagic sediment component of the Blake-Bahama Formation at Site 603 are synchronous with those in the Blake-Bahama Basin (Sites 534 and 391) to the south. Carbonate sedimentation ended in the early Aptian, probably because of a regional shoaling of the carbonate compensation depth.

Chemical composition of a concretion dredged from lake Madüsee (lake Miedwie, Poland)

This article describes the bottom sediments, lake ores and limestone bedrock dredged from lake Mad¸see in Pommerania now known as lake Miedwie in Poland.

(Table 1) Mineralogy at DSDP Leg 62 Holes

Sixty-nine sediment samples of Deep Sea Drilling Project Leg 62 were mineralogically examined by X-ray diffractometry, and gasometrically for their carbonate content. Most sediments were found to be carbonate-rich; some have up to 97% CaCO3. Many chalk or limestone samples contain chert, accounting for high quartz percentages in some analyzed samples.