978 resultados para Mine timbering.


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Using knowledge of geology, geochemistry, coal petrology, mineralogy, by means of a variety of advanced measuring methods such as inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled atomic emission spectrometry (ICP-AES), X-ray powder diffraction (XRD), scanning electron microscopy with energy-dispersive spectrometer(SEM-EDS), sequential chemical extract and density fractions, the characteristics of trace elements and minerals in Jurassic Beipiao coal mine under inland limnetic sedimentary environment and in late Permian Jianxin and Qiaotou coal mines under paralic swamp sedimentary environment were studied. Compared with the average concentration in the world bituminous coals, the Beipiao coal was characterized by relatively high contents of Sc, Ti, Cr, Co, Ni, Zn, Se, Sr, Zr, Y, Ba, REE and Th, and lower contents of V, Rb, Cd, Sn, Pb, Bi and U; while the Jianxin coal was relatively enriched in Li, Sc, Ga, Sr, Y, Nb, Sb, Th and U, with low concentration of Be, Co, Ni, Cu, Ge, Zr, Mo, Cd, Cs, Ba, Pb and Bi; and the Qiaotou coal was enriched in Li, Sc, Sr, Nb, Ta, Zr, REE, Hf, Th and U, with low concentration of Be, V, Co, Ni, Cu, Ge, Mo, Cd, Cs, Ba, Tl, Pb and Bi. The concentrations of Ca, Mg and K in Beipiao coal are higher than those in Jianxin coal and Qiaotou coal, while Fe, S and Ti in Beipiao coal are lower than those in Jianxin coal and Qiaotou coal. The proximate analysis of coal samples was carried out, which indicated that Beipiao coal was medium- to high- ash (5.92-60.68%) with low sulphur coal, and Jianxin coal and Qiaotou coal was medium to high ash (8.85-46.33%) with high sulphur. The reflectivity was measured, which explained that Beipiao coal belonged to high volatile bituminous coal, Jianxin coal was low volatile bituminous coal and Qiaotou coal was low volatile anthracite. Quantitative maceral analyses were studied. The characteristics of rare earth elements (REE) were investigated, which showed that the total contents of REE were higher than that of the world's average content. With the increase of coal's metamorphic grade, the total contents of REE decreased from 98.5 X 10"6 of Beipiao coal to 94.2 X 10"6 of Jianxin coal, and to 75.9 X 10"6 of Qiaotou coal, and 5Eu reduced which indicated that the element Eu depleted. The characteristics of REE was controlled by the metamorphic grade of coal. And REE were mainly absorbed in clay minerals in Beipiao coal samples, while in Jianxin and Qiaotou coal mines, REE were primarily related to clay mineral and pyrite. The variation of trace elements in vertical direction of coal seams was studied, and the results showed that different trace elements differed greatly. The correlation between trace elements and ash were determined. Four major trace elements (aluminium-silicates, sulphide, carbonate and phosphate) accounted for the occurrence and distribution of most elements studied were determined. Coal samples were separated by density fraction, which showed that Cr, Cu, Mo and Pb were closely related to inorganic matters mainly distributed in P >2.6 and dropped remarkably in the density fractions P <2.3 . The occurrences of Co, Cr, Ni, As, Se, Mo, U were studied directly and quantitatively using sequential chemical extract with six steps, which showed that Co. Ni, Mo and U were mainly in the form of mineral, and As, Se chiefly in the form of organic state, while Cr mostly in the form of organic state and mineral. Major mineral phases presented in the Beipiao coal were Kaolinite, illite, quartz, calcite, and small amount of siderite, barite. While major mineral phases in Jianxin and Qiaotou coal were pyrite, kaolinite, and small amount of marcasite, rutile, sphalerite. This is the first time that the chromite in the coal was discovered in China, which indicates that Cr occurrence appeared in the form of chromite. The ratio of Sr/Ba, Sr/Ca and V/Ni in Beipiao coal mine under inland limnetic is smaller than that of in Jianxin and Qiaotou coal mines under paralic swamp. The ratio of K/Na and Th/U of Beipiao coal mine is higher than that of Jianxin and Qiaotou coal mine, which proved that Beipiao coal was not affected by sea water and Jianxin and Qiaotou coal were affected by sea water. Trace elements such as Cr, Ni, Mo in minerals were analyzed by SEM-EDS. The factors controlling the enrichment of trace elements can be divided into syngenetic stage factors and epigenetic stage factors.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Cut-and-filling stoping becomes more and more important in mining industry for the advantage in protecting environment and its adaptability. However, there is less research in the movement of rock mass and the ground displacement caused by the mining method. In this paper, based on relevant geological and geotechnical test data, the strata movement and the ground displacement of Jinchuan nickel mine are studied comprehensively. The main achievement in this paper can be drawn as follows. Geologic conditions of mining area No.2 of Jinchuan Nickel mine are summed up and influential factors of the movement of rock mass and the surface displacement are analyzed. For recognized the shape of orebody No.l, three-dimensional model is established with 3D Studio MAX software. Based on reconnaissance trip, the monitoring data of GPS and ground fissures in mining area No.2 of Jinchuan Nickel mine are discussed. Then, the rule of the surface displacement and the reason of ground fissures generation are preliminary analyzed. The characteristic of ground movement, surrounding stress and strain in the process of excavation and backfilled is research and analyzed with the method of numerical simulation. The rule of the movement of rock mass and the surface displacement in mining area No.2 of Jinchuan Nickel mine is summed up. The influence of the movement of rock mass and the surface displacement by the dip angle of orebody No.l in mining area No.2 is examined and then the strata movement and the ground displacement is predicted.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Fanshan complex consists of layered potassic ultramafic-syenite intrusions. The Fanshan apatite (-magnetite) deposit occurs in the Fanshan complex, and is an important style of phosphorus deposit in China. The Fanshan complex consists of three (First- to Third-) Phases of intrusion, and then the dikes. The First-Phase Intrusive contains ten typical layered rocks: clinopyroxenite, biotite clinopyroxenite, coarse-grained biotite clinopyroxenite, pegmatitic orthoclase-biotite clinopyroxenite, variegated orthoclase clinopyroxenite, interstitial orthoclase clinopyroxenite, biotite rock, biotite-apatite rock, biotite rock and magnetite-apatite rock. This layered intrusive consists of nine rhythmic units. Each rhythmic unit essentially comprises a pair of layers: clinopyroxenite at the bottom and biotite clinopyroxenite at the top. The apatite (-magnetite) deposit is situated near the top of rhythmic Unit no. 6 of the First-Phase Intrusive. The Second-Phase Intrusive contains three typical rocks: coarse-grained orthoclase clinopyroxenite, . coarse-grained salite syenite and schorlomite-salite syenite. The Third-Phase Intrusive includes pseudo-trachytic salite syenite, porphyritic augite syenite, fine-grained orthoclase clinopyroxenite and fine-grained salite syenite. The origin of the Fanshan complex is always paid attention to it in China. Because most layered igneous intrusion in the world not only have important deposit in it, but also carry many useful information for studying the formation of the intrusion and the evolvement of magma. Two sketch maps were drawn through orebodies along no. 25 cross-cut on 425 mL and no. 1 cross-cut on 491 mL in the Fanshan mine. Through this mapping, a small-scaled rhythmic layering (called sub-rhythmic layering in the present study) was newly found at the top of the rhythmic Unit no. 6. The concept of sub-rhythmic layering is defined in this article. The sub-rhythmic layering is recognized throughout this apatite-rich part, except for magnetite-apatite rock. Presence of the layered magnetite-apatite rock is one of the characteristics of the Fanshan apatite (-magnetite) deposit. Thus, from this layer downwards six units of sub-rhythmic layering are recognized in the present study. Each unit consists of biotite clinopyroxenite (or biotite rock and biotite-apatite rock) layer at the bottom and apatite rock layer at the top. To study this feature in detail is an important work for understanding the origin of the Fanshan complex and apatite (-magnetite) deposit. The origin of the Fanshan complex and the relation of the formation of the apatite(-magnetite)deposit will be interpreted by the study of sub-rhythmic layering on the basis of previous research works. The magma formed the Fanshan complex was rich in K2O, early crystallized pyroxene, and after this phase more biotite crystallized, but no amphibole appeared. This indicated that the activity of H2O in the magma was low. Major element compositions of biotite and clinopyroxene (on thin sections) in the sub-rhythmic layering were analyzed using electron microprobe analyzer. The analytical results indicate Mg/(Mg+Fe*+Mn) atomic ratios (Fe*, total iron) of these two minerals rhythmically changed in sub-rhythmic layering. The trends of Mg/(Mg+Fe*+Mn) atomic ratio (Fe*, total iron) of biotite and clinopyroxene indicate that the magma evolved markedly from relatively magnesian bottom layer to less magnesian top layer in each sub-rhythmic unit. A general trend through the sub-rhythmic layering sequence is both minerals becoming relatively magnesian upwards. The formation temperatures for sub-rhythmic layering yield values between 600 and 800 ℃, were calculated using the ratio of Mg/(Mg+Fe+Mn) in the salite and biotite assemblage. The equilibrium pressures in the rhythmic layers calculated using the contents of Al in the salite were plotted in the section map, shown a concave curve. This indicates that the magma formed the First-Phase Intrusive crystallized by two vis-a-vis ways, from its bottom and top to its centre, and the magnetite-apatite rock was crytallized in the latest stage. The values of equilibrium pressures in the sub-rhythmic layering were 3.6-6.8(xlO8) Pa with calculated using the contents of Al in the salite. The characteristics of geochemistry in various intrusive rocks and the rocks or apatite of sub-rhythmic layers indicated that the Fanshan complex formed by the comagmatic crystallization. The contents of immiscible elements and REEs of apatite rock at the top of one sub-rhythmic unit are more than biotite clinopyroxenite at the bottom. The contents of immiscible elements and REEs of apatite of biotite clinopyroxenite at the bottom of one sub-rhythmic unit are higher than apatite rock at the top. The curves of rocks (or apatite) in the upper sub-rhythmic units are between two curves of the below sub-rhythmic unit in the primitive mantle-normalized trace element abundance spider diagram and the primitive mantle-normalized REE pattern. The trend for the contents of immiscible elements and REEs inclines to the same contents from the bottom to the top in sub-rhythmic layering. These characteristics of geochemistry of rocks or apatites from sub-rhythmic layering indicate that the latter sub-rhythmic unit was produced by the residual magma after crystallization of the previous sub-rhythmic unit. The characteristics of petrology, petrochemistry, geochemistry in the Fanshan complex and sub-rhythmic layers and the trends of Mg/(Mg+Fe+Mn) atomic ratio of biotite and clinopyroxene in sub-rhytmic layering rejected the hypotheses, such as magma immiscibility, ravitational settling and multiple and pulse supplement of magma. The hypothesis of differentiation by crystallization lacks of evidences of field and excludes by this study. On the base of the trends of formation temperatures and pressures, the characteristics of petrology, petrochemistry, geochemistry for the Fanshan complex and the characteristics of geochemistry for the rocks (or apatites), the trends of Mg/(Mg+Fe+Mn) atomic ratio of biotite and clinopyroxene in sub-rhytmic layering, and the data of oxygen, hydrogen, strontium and neodymium isotopes, this study suggests that the magma formed the Fanshan complex was formed by low degree partial melting of mantle at a low activity of H2O, and went through the differentiation at the depth of mantle, then multiply intruded and crystallized. The rhythmic layers of the First-Phase Intrusive formed by the magma fractional crystallized in two vis-a-vis ways, from the bottom and top to the centre in-situ fractional crystallization. The apatite (-magnetite) deposit of the Fanshan complex occurs in sub-rhythmic layering sequence. The the origin of the sub-rhythmic layering is substantially the origin of the Fanshan apatite (-magnetite) deposit. The magma formed the rhythmic layers of First-Phase Intrusive was rich in H2O, F and P at the later stage of its in-situ fractional crystallization. The Fanshan apatite (-magnetite) deposit was formed by this residual magma in-situ fractional crystallization. The magnetite-apatite rock was crystallized by two vis-a-vis ways at the latest stage in-situ fractional crystallization in the rhythmic layers. The result was light apatite layer below heavy the magnetite-apatite layer, formed an "inversion" phenomenon.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

With the progress of prospecting, the need for the discovery of blind ore deposits become more and more urgent. To study and find out the method and technology for the discovery of blind and buried ores is now a priority task. New geochemical methods are key technology to discover blind ores. Information of mobile components related to blind ores were extracted using this new methods. These methods were tested and applied based on element' s mobile components migrating and enriched in geophysical-geochemical process. Several kinds of partial extraction techniques have tested based on element' s occurrence in hypergenic zone. Middle-large scale geochemical methods for exploration in forest and swamp have been tested. A serious of methods were tested and applied effetely about evaluation of regional geochemical anomaly, 1:25000 bedrock or soil geochemical methods sampling based on the net in dendritic water system instead of the normal net. 1. Element related with ores can be mobiled to migrate upwards and be absorpted by surface soil. These abnomal components can be concentrated by natural or artificial methods. These trace metalic ions partially exist in dissovlvable ion forms of active state, and partially have been absorbed by Fe-Mn oxide, soil and organic matter in the soil so that a series of reaction such as complex reaction have take place. Employing various partial extraction techniques, metallic ions related with the phase of the blind ores can be extracted, such as the technique of organic complex extraction, Fe-Mn oxide extraction and the extraction technique of metallic ions of various absorption phases. 2.1:200000 regional geochemical evaluation anomaly methods: Advantageous ore-forming areas were selected firstly. Center, concentration, morphological feature, belt of anomaly were choosed then. Geological and geochemical anomalies were combined. And geological and geochemical background information were restrained. Xilekuduke area in Fuyun sheet , Zhaheba area in Qiakuerte sheet, the west-north part in Ertai sheet and Hongshanzui anomaly in Daqiao sheet were selected as target areas, in Alertai, in the north of Xinjiang. in Xilekuduke area, 1:25000 soil geochemical methods sampling based on the net in dendritic water system was carried out. Cu anomaly and copper mineralization were determined in the center area. Au , Cu anomalies and high polarization anomaly were determined in the south part. Prospecting by primary halo and organic complex extraction were used to prognosis blind ore in widely rang outcrop of bedrock. 1:25000 bedrock or soil geochemical methods sampling based on the net in dendritic water system were used in transported overburden outside of mining area. Shallow seismic method and primary halo found a new blind orebody in mining area. A mineralization site was fou and outside of Puziwan gold mine, in the north of Shanxi province. Developing middle-large scale geochemical exploration method is a key technique based 1:200000 regional geochemical exploration. Some conditions were tested as Sampling density , distribution sites of sample, grain size of sample and occurrence of element for exploration. 1:50000 exploration method was advanced to sample clast sediment supplement clast sediment in valley. 1:25000 bedrock or soil geochemical methods sampling based on the net in dendritic water system was applied to sample residual material in A or C horizon. 1:2000 primary or soil halo methods used to check anomalies and determine mineralization. Daliang gold mineralization in the northern Moerdaoga was found appling these methods. Thermomagnetic method was tested in miniqi copper-polymetallic ore. Process methods such as grain size of sample, heated temperature, magnetic separating technique were tested. A suite of Thermomagnetic geochemical method was formed. This method was applied in Xiangshan Cu~Ni deposit which is cover by clast or Gobi in the eastern Xinjiang. Element's content and contrast of anomaly with Thermomagnetic geochemical method were higher than soil anomaly. Susceptibility after samples were heated could be as a assessment conference for anomaly. In some sectors thermo-magnetic Cu, Ni, Ti anomalious were found outside deposits area. There were strong anomal ies response up ore tested by several kind of partial extraction methods include Thermomagnetic, enzyme leach and other partial extractions in Kalatongke Cu-Ni deposit in hungriness area in the northern of Xinjiang. Element's anomalies of meobile were mainly in Fe-Mn oxide and salt. A Copper mineralization site in Xilekuduke anomaly area had been determined. A blind ore was foung by shallow seismic and geochemical method and a mineralization site was found outside this mining area in Puziwan gold deposit in shanxi province. A Gold mineralization site was found by 1:50000 geochemical exploration in Daliang, Inner Mongolia.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this paper, We analyzed the geological and geographical settings of dinosaurs extinction at the end of Cretaceous, especially the effect of the change of the elements contents on dinosaurs extinction. We studied basis on the two typical sections-Cretaceous-Paleocene boundary (Baishantou section (in Jiayin, Heilongjiang province of China) and Arkhara-Boguchan Coal Mine section (in Far East of Russian)) and Longgushan section (in Jiayin, Heilongjiang province of China) mainly. This work provided some evidences for forecasting the effects of global environmental change on bio-circle. The followings are the primary gains: According to the paleo-climate indexes (CaO/MgO,Sr/Ba) and the results of Factor Analysis, we found that there were similar climate in Baishantou section and Arkhara-Boguchan Coal Mine section near the K/E boundary, and both of them took on the trend of temperature declining and precipitation heightening after transitory high-temperature and drought. There are similar change and evlution rule of the elements contents near the boundary in the both sections (Baishantou section and Arkhara-Boguchan Coal Mine section). Both iron group elements and chalcophile elements appeared obvious abnormity. There are not visible correlation between the change of elements contents and climate indexes. This shows that the elements abnormity maybe came from the factors excluding climate or the factors were too many to conceal the influence of climate. --The result of cluster analysis showed that the boundary between BST3-8 and BST3-9 may be the K/E boundary of Baishantou section, and the top of twofold coal were the K/E boundary of Arkhara-Boguchan Coal Mine section which was consistent with accepted conclusion formerly. By contrast of elements contents in dinosaur bones and general organism, in surrounding rock and general sand stone, the regulation of the change of elements contents in dinosaur bones and surrounding rock, we confirmed that dinosaur extinction in Jiayin were relative with the high abnormities of Sr, Ba, Pb, Cr and the low abnormity of Zn, at least, it was them which speeded up dinosaurs extinction. After a series of analysis, we concluded that dinosaurs extinction of this areas tied up with the relative high background values of geo-chemical elements , paleo-climate and disaster incidents. First of all, high background values provided the necessary condition for the accumulation of the elements. Secondly, the drought climate adverse to the survival of dinosaurs, and led them to extinct gradually. finally, disaster incidents, the eruption of volcano or the collision of aerolites, made them exit this planet.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The reflection seismic prospecting technique is an important and a widely used method in the petroleum and coal surveying, and has been developed to a perfectly mature technique from the aspects of data acquisition, data processing to data interpretation. However, the metallic mine seismic prospecting, especially the high resolution seismic prospecting technique are being still in the course of studying and probing up to now. In this paper, the basic theory and the present situation of study on metallic mine seismic reflection are expatiated, the basic theory, the improving measure, the converging velocity and the ability on the integrating global optimization method are also illuminated in detail at first. Then the basic theory, the realization process and the practicing effects of the vector suppressing noise algorithm are also introduced. On the basis of studying of applying the integrating global optimization method to static correction and the vector suppressing noise algorithm, we elaborate processed the seismic data of Tongling metallic mine. We introduced the processing flow, the key steps and the processing effects. Basing on the processing results, we analyzed the major reflection characteristics, the geological interpretation results and the earth's crust top reflection structure and the space distribution status of Wutong set, the space shape of part lithological body and the contacting relations of horizonsunveiled.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

通过电子探针背反射图像(BSE)和能谱(ES)分析,结合岩矿鉴定和前人研究资料,确定大岩子PGE矿床与矿化有关的主要是一套低温矿物组合。与成矿特征相似的New Rambler Mine矿床进行了对比,并综合前人有关PGE低温成矿的论述和实验研究,认为大岩子PGE矿床具有明显的低温成矿特征,其成矿温度低于300℃,经历了富S体系溶液下的富集成矿和紧随其后的富Cl体系溶液下活化再富集成矿两个过程,后期矿化可能相当于或者强于前期矿化.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

矿产资源开采利用过程中导致的重金属环境污染问题日益严重。我国铅锌矿资源丰富,其开采利用过程中镉的环境污染也日益突出。本文通过对云南兰坪金顶Pb-Zn矿区矿床开采利用过程中镉等重金属元素的环境地球化学行为及矿区生态环境的研究,得出如下主要结论。 1. 矿石淋滤实验表明矿区部分氧化铅锌矿石可以很快被再次氧化或者被溶解并释放出大量镉等有害元素,滤出元素可以迅速发生沉淀或被沉淀物包裹,其释放能力表现为Zn>Pb>Cd。铅锌氧化矿石中菱锌矿组分含量是影响镉淋失的主要因素。在开放体系的水-岩作用下,矿区岩石、矿物的自然风化极易造成当地水系统中镉污染。 2. 矿区不同岩(矿)石中镉含量分布差异比较大,围岩中镉含量为50-650 ppm,平均310 ppm,原生矿中镉含量为14-2800 ppm,平均767 ppm,氧化矿中镉含量为110-8200 ppm,平均1661 ppm,其平均值最高。Zn、Cd地球化学性质的差异导致了二者在原生矿和氧化矿中的不同地球化学分配特点,原生矿Zn/Cd高于氧化矿Zn/Cd,表明氧化环境中镉更容易在氧化矿中富集,而锌更容易被氧化析出到环境中。氧化矿中Cd与Ca呈负相关,这表明Cd的富集和Ca的氧化淋失是同时进行的,并且还可能有Cd对Ca的类质同像代替存在。 3. 矿区上游对照区土壤中的高含量Cd浓度是因土壤母质层重金属高背景值造成的,而非人为污染。矿区中心区土壤受到严重Cd污染,可能与选厂、采场废石堆、尾矿库和露采矿山大范围暴露有关。矿区沿沘江下游两岸土壤中Cd含量远远超出上游土壤背景值和金顶全区土壤背景值,这可能是与污水灌溉有关。通过加权综合污染指数评价法发现矿区土壤污染的主要因子是Cd,其次是Zn和Pb,矿区土壤重金属污染贡献顺序为:Cd>Zn>Pb。矿区土壤污染主要表现为:矿区土壤污染有从中心区向沘江下游扩散区土壤中蔓延的趋势。 4. 矿区水体中出现较高含量的镉,高出天然河流中镉含量的50-100倍。矿区架崖山、北厂和跑马坪等采矿区水体中镉浓度范围在15-30 µg/L之间。矿区水体中镉含量水平表现为:矿山浅层地下水>矿山溪流水>沘江河水。研究结果表明,矿区沘江下游河段水体明显受镉污染,其中水体中镉的平均含量为15.7 µg/L,悬浮物中镉含量为49.3 mg/kg,沉积物中镉含量为203.7 mg/kg。矿区载镉岩石和矿物的自然风化是造成矿区水环境中镉污染的直接原因。 5. 跑马坪采场的废弃石具有较低的Cd含量,而北厂、架崖山采场的废弃石具有较高的Cd浓度,可能与废弃矿石类型本身差异有关。尾矿剖面中的Cd含量,在表层中随剖面深度呈递减趋势,在中层随剖面深度变化不明显,而在底层中明显富集。尾矿库表层尾矿样品中弱酸提取态和可还原态Cd高于底层尾矿样品,相比之下,表层尾矿中Cd等重金属元素易于释放到环境中,对环境的潜在危害大。老尾矿库尾矿砂中Cd金属总量高于新尾矿库尾矿砂,可能还是因为选矿工艺、技术的差异造成的。 6. 矿区污染段水体中硫同位素值较低,远远低于上游非污染区硫同位素值。矿区水体中δ34S值保持了金顶铅锌矿山源区矿山物质硫同位素的特征,显示了矿山来源物质的影响。根据水体硫酸盐中硫同位素稀释原理,研究发现沘江下游水体SO42-中85 %的硫来源于矿山物质。 7. 从矿区筛选出Cd、Zn、Pb的超富集植物共有4种:其中Cd超富集植物有2种,分别是本地生条裂萎陵菜(Potentilla lancinata Card. In Lecomte)和辣子草(Galinsoga parviflora Cav.);Zn超富集植物仅发现有1种植物,为节节草(Equisetum ramosissmum Desf.);Pb超富集植物发现了1种植物,为毛莲菜(Picris hieracioides L.)。这些植物均具备了超富集植物的基本特征,在污染土壤治理与修复方面具有一定的实践意义。 8. 建立了金顶铅锌矿山(床)地质环境模型。Cd的释放、迁移扩散模式为:雨水淋滤时,矿山固体废弃物产生富Cd的酸性或弱酸性矿山排水,通过下渗淋滤发生测向和垂向迁移,进入周边水体和土壤,然后被水系沉积物中针铁矿、方解石等吸附,并在沉降物中沉淀富集,导致矿区主要河流沘江水体的自净能力下降,加速水体的进一步恶化,破坏生物生存环境。矿区受污染水体、土壤和大气中的有害物质通过生物链进入动植物体内,进而危害人类健康。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

柿竹园有色金属矿山是我国已经探明的地质资源储量最大的钨、钼、锡、铋等多金属矿山,其中锡累计探明储量达48万吨。目前柿竹园仅回收钨、铋、钼、铅、锌、萤石矿等,大量锡随着钨、钼、铋等金属的开采作为废料进入尾矿,因此在尾砂库中保留了丰富的锡资源。对柿竹园尾矿中锡进行回收再利用,必须首先对其综合回收利用途径与前景作出科学评价。本文对柿竹园多金属矿床Ⅲ矿带锡的赋存形式、千吨尾矿库尾矿物质组成特征、锡的丰度、赋存形式和分布进行了研究,在此基础上分析柿竹园尾砂锡综合回收利用的前景。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

锑(antimony,Sb)是一种典型的毒害重金属元素。我国作为世界上最主要的锑生产国,有关锑的表生地球化学及锑污染防治研究还很薄弱。贵州省位于我国西南低温成矿域中心,具有高Sb地球化学背景值,是我国重要的锑工业基地,境内分布着大量Sb矿床,锑矿储量居全国第四位。贵州又地处我国西南喀斯特中心区域,岩溶地貌极其发育,生态环境脆弱。由于大规模锑矿资源的开采利用,锑矿区土壤和水体中Sb污染十分突出,并通过水体或食物链对矿区及流域居民健康形成潜在威胁。因此,研究矿山环境中Sb的表生地球化学对于认识Sb污染的环境效应和寻求Sb污染修复方式具有至关重要的意义。 本文以贵州半坡大型锑矿区为研究对象,系统研究了Sb在矿区岩石、固体废弃物、土壤、水体和植物体等表生环境介质中的分布、迁移、富集规律与赋存机制,阐明了矿区Sb的表生地球化学过程规律,评价了矿区围岩、(废)矿石和尾矿砂等样品的产酸潜力,筛选出新的锑潜在超富集植物和超耐受性植物,并获得以下主要认识: (1) 独山半坡锑矿区是典型高锑地质地球化学背景区,不仅矿石中Sb含量很高,而且围岩中Sb含量也远高于上地壳Sb的平均含量。辉锑矿是锑的主要载体和释放源。 (2) 在固体废弃物中,冶炼废渣中Sb含量最高,其次为废石堆和尾砂库。废石中元素特征基本与围岩一致,继承了围岩的元素特征,而尾矿砂由于破碎、浮选过程的改造,其元素含量特征与围岩存在差异。尾砂砂中Sb以中层最富,底层和表层依次降低,与Fe、Al矿物的分布特征相似,这种分布模式主要受氧化还原条件、雨水淋滤、Fe/Al矿物吸附机制等因素控制。尾矿砂中不同相态的锑含量依次为残渣态>碳酸盐结合态>有机物结合态>可交换态>铁锰氧化物结合态,其中生物易利用态Sb的空间分布特征与总Sb分布特征一致。 (3) 所有的(废)矿石样品都具有潜在产酸能力,需要采取必要的措施抑制酸性矿山排水的产生。尾矿砂没有产酸潜力,这与矿石在选冶过程中加入石灰处理和S含量过低等原因有关,这种碱性环境可能有利于锑的表生地球化学活化和迁移。 (4) 研究区土壤受到严重锑污染,土壤中Sb含量高达51~7369 mg/kg,且随深度增加而逐渐降低,底层含量与对照区相近。这种高含量的Sb可能是与锑矿化有关的裸露岩石和土壤的自然风化淋滤过程和采矿、冶炼活动等造成的。研究区土壤中不同相态的Sb含量依次为残渣态>铁/锰氧化物结合态>碳酸盐结合态>有机物/硫化物结合态>可交换态。土壤中Sb的生物有效性很低。土壤中Sb的迁移与As密切相关。 (5) 研究区水体为SO4/HCO3-Ca型,水体中的Sb以溶解态、悬浮态和沉积物形式存在,并通过吸附-解吸附和水流推移方式进行迁移。洪水期和枯水期水体中Sb的扩散迁移机制存在差异,洪水期研究区内水体对岔河下游水体污染危害更大。在枯水期,岔河水体中溶解态Sb含量和沉积物中Sb含量存在显著正相关关系,表明枯水期沉积物和水体界面间达到物质交换平衡。水体的氧化还原条件和pH值控制着水体中Sb的存在形态。沉积物中不同相态Sb含量依次为残渣态>碳酸盐结合态,铁锰氧化物结合态>可交换态,有机物/硫化物结合态。研究区水体中Sb主要受矿区采矿、选冶活动的强烈影响。水体中硫同位素示踪研究发现,岔河下游水体中59%的S来自于矿山硫源的贡献,表明矿山活动严重影响到岔河下游水体水质。 (6) 植物对土壤中Sb的吸收与植物部位和种类有关。大体上地下部分>地上部分,且根>叶片>茎。在农作物中,白菜>甘蓝>辣椒和稻谷。研究发现,土荆芥(Chenopodium ambrosioides Linn.)是新的Sb潜在超富集植物,鬼针草(Bidens pilosa Linn.)、一年蓬(Erigeron annuus (Linn.) Pers.)、佛甲草(Sedum lineare Thun)、凹叶景天(Sedum emarginatum Migo)、灰灰菜(Chenopodium album Linn.)和鼠麹草(Gnaphalium affine D. Don)也能大量富集Sb,并有很强耐受性。 (7) 研究区这种特殊的高Sb地质环境和人为活动的影响,导致表生环境中Sb的高度富集,造成农作物、水体中Sb含量极高,通过食物链和水体严重影响当地居民的身体健康。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

矿山开发引起的环境问题是全球性的问题,越来越受人们的重视,已成为环境地球化学研究的一个重要领域.长期以来,由于AMD有较低pH值和较高的金属含量,加之其对生态环境影响的严重性而备受关注,并取得了若干重要研究进展.在碳酸盐岩地区的矿山环境中,由于其矿石类型、围岩类型以及选矿工艺的不同形成的矿山水体常呈中性,甚至碱性.而这类水体也能有相当含量的重金属,也可导致水文生态系统灾难性的变化.然而,相对酸性矿山水而言,碳酸盐岩矿山环境(碱性水体)重金属元素地球化学研究显得非常薄弱.碳酸盐岩矿山环境作为矿山环境的重要类型之一,人们完全有必要去了解这类环境中重金属元素的迁移释放和沉淀过程.论文通过对低硫化物、高碳酸盐岩矿山周围各种环境要素中重金属矿物学、存在形态的系统研究,辅以硫同位素和REE的示踪手段揭示了碳酸盐岩山区金属矿山开发过程中重金属元素的释放迁移的地球化学过程.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Avaliação do efeito de um polímero hidrorretentor de umidade em diferentes lâminas de irrigação por gotejamento, na cultura do meloeiro híbrido amarelo Gold Mine.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Mighall, T. Abrahams, P. Grattan, J. Hayes, D. Timberlake, S. Forsyth, S. Geochemical evidence for atmospheric pollution derived from prehistoric copper mining at Copa Hill, Cwmystwyth, mid-Wales, UK. The Science of the Total Environment. 2002. 292 pp 69-80

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In spite of the great amount of emerald deposits throughout the world, the priorities in quality and volume of extracted rough material are the sites of Colombia (Muzo and Chivor emerald belts). This sites are know even before the Spanish conquistadores. Emeralds were extracted from Somondoco mine (today Chivor) since 1537 and from Muzo in 1567. Contrariwise to the majority of the emerald deposits of the world, which are associated with granitic rocks, the Colombian emerald deposits are associated with hydrofracturing (the main factor controlling emerald mineralization) and hydrothermal fluids, rich in beryl, chrome and vanadium, induced by a tectonic inversion of the deep Mesozoic backarc basin, which is also responsible of the majority of the petroleum systems of the foredeep and foldbelt areas (maturation of the source-rocks andcreation of structural traps). The host rocks of the emeralds are carbonaceous calsiltites (calcareous schists) rich in organic matter of Lower Cretaceous age, which are cut by calcite veins, which, often, contain emeralds, particularly when they are folded. Indeed, since long time (Cheilletz, A. and Giulliani, G., 1996) suggested a two-stage model for the formation of the Colombian emeralds : (i) Stage I is characterized by décollement planes (early compressional tectonic regime) within the carbonaceous calsiltites, hydrothermal fluid infiltration and wall-rock metasomatic alteration ; (ii) Stage II (late tectonic regime) deforms the previous veins by thrust-related folds (development of stratiform and hydraulic breccia), which are synchronous of the emerald mineralization. The resulting tectonic structures are complex fold patterns characterized by propagation anticlines with emerald veins and emerald hydraulic breccia in the apexes, as in Quipama, Tendenquema and Chivor mines. Otherwise stated, since all emerald exploitations are, presently underground, exhaustive geological and particularly structural studies are required to reduce the probability of disappointments. The color of emeralds is from light green to thick green with obvious pleochroism. They appears with different colors when observed at different angles, especially with polarized light. The emeralds from Coscuez deposits have a homogeneous intensive color and bluish tone. At Muzo deposit, the emeralds have middle or dark green color with yellowish tone. At the Chivor deposits, the emeralds have less intensive green color with slight bluish tone. The typical inclusions are albite and pyrite, as well as long bubbles with three phase-inclusions according the zones of growth and along the crystal shapes.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This dissertation describes a model for acoustic propagation in inhomogeneous flu- ids, and explores the focusing by arrays onto targets under various conditions. The work explores the use of arrays, in particular the time reversal array, for underwater and biomedical applications. Aspects of propagation and phasing which can lead to reduced focusing effectiveness are described. An acoustic wave equation was derived for the propagation of finite-amplitude waves in lossy time-varying inhomogeneous fluid media. The equation was solved numerically in both Cartesian and cylindrical geometries using the finite-difference time-domain (FDTD) method. It was found that time reversal arrays are sensitive to several debilitating factors. Focusing ability was determined to be adequate in the presence of temporal jitter in the time reversed signal only up to about one-sixth of a period. Thermoviscous absorption also had a debilitating effect on focal pressure for both linear and nonlinear propagation. It was also found that nonlinearity leads to degradation of focal pressure through amplification of the received signal at the array, and enhanced absorption in the shocked waveforms. This dissertation also examined the heating effects of focused ultrasound in a tissue-like medium. The application considered is therapeutic heating for hyperther- mia. The acoustic model and a thermal model for tissue were coupled to solve for transient and steady temperature profiles in tissue-like media. The Pennes bioheat equation was solved using the FDTD method to calculate the temperature fields in tissue-like media from focused acoustic sources. It was found that the temperature-dependence of the medium's background prop- erties can play an important role in the temperature predictions. Finite-amplitude effects contributed excess heat when source conditions were provided for nonlinear ef- fects to manifest themselves. The effect of medium heterogeneity was also found to be important in redistributing the acoustic and temperature fields, creating regions with hotter and colder temperatures than the mean by local scattering and lensing action. These temperature excursions from the mean were found to increase monotonically with increasing contrast in the medium's properties.