Lorenzo Meyer: “la misión básica del historiador o del científico social es estar inconforme”

Para el historiador y analista político (México, D. F., 1942), la objetividad en los temas de estudio, ya sean históricos o sociales, se establece en función de razones políticas y de formación de quienes hacen historia, y considera que en el ámbito de los académicos se presenta una muy buena y saludable pluralidad.

Consuelo Meyer (1928-2010)

Su meta de Consuelo Meyer fue hacer de la Facultad de Economía una de las mejores en su género no solo en México sino en Latinoamérica “y creo – decía al hacer un balance - que lo conseguí”.

Pré-germinação de sementes de tucumã do Amazonas (Astrocaryum aculeatum Meyer) submetidas a diferentes ambientes de secagem.

O tucumã do Amazonas é uma palmeira de grande importância socioeconômica na Amazônia, devido ao uso múltiplo dos componentes da planta, principalmente a polpa, utilizada na culinária regional. O presente trabalho objetivou avaliar a influência de diferentes ambientes de secagem, para a remoção do endocarpo (pirênio), na pré-germinação das sementes de tucumã.

Petrofac International Limited: el mercadeo interno, una estrategia efectiva en el manejo de personal

Como futuros administrados es importante recordar que nuestra función no será únicamente crear una empresa y generar constantemente ingresos. Esto es una de tantas tareas que tiene una persona que se encamina por crear o ser parte de una empresa, sea grande o pequeña siempre existirán variables que con los años se han convertido más y más indispensables en los procesos de este recorrido. El tema principal de nuestro estudio de caso es entender el concepto del endomarketing o como muchos lo conocen marketing interno; en pocas palabras es algo que por años se ha visto su efectividad en la productividad y satisfacción de los empleados. Google es una de las multinacionales más grandes del mundo, que el ultimo reconocimiento fue por parte de uno de los ranking más influyentes “The World’s Billionaries” ocupando como el CEO de la compañía Larry Page el puesto #12 , que por años ha sabido invertir en su recurso más importante que son sus empleados. En una entrevista con la revista Fortune, Larry exclama que “es importante que la empresa sea una familia, que las personas sientan que son parte de la empresa, y que la empresa es como una familia para ellos. Cuando se trata a las personas de esa manera, se obtiene una mejor productividad”. Con este pequeño ejemplo e idea de cómo una de las marcas más influyentes en el mundo ha fortalecido su mejor recurso por años el cual le ha remunerado con el éxito que tiene hoy en día. Entonces es como el mercadeo interno o endomarketing siendo uno de los conceptos tratados en el mercadeo en general hoy en día, logrando meterse como un modelo de negocio en la mayoría de empresas que existen hoy. Este es uno de los motivos que nos motivó para desarrollar este estudio de caso que verán a continuación, el cual se basa en la investigación y análisis de variables que comprenden a la empresa Petrofac, y si bien ha sabido implementar el concepto en sus procesos diarios. El estudio de caso describe como a través de los años ha sabido implementar con éxito la herramienta de evaluación y análisis del mercado interno a los empleados que constituyen hoy en día Petrofac International Limited. Abarcaremos primero con los objetivos del estudio, seguido del inicio y crecimiento de la empresa en los últimos años, en que países tiene presencia y cuáles son sus proyectos más importantes hoy en día. El estudio de caso será implementado por un tipo de investigación descriptiva, que con la recopilación de suficiente información tanto cuantitativa como cualitativa nos ira fortaleciendo la hipótesis principal, usaremos datos estadísticos que serán recopilados de encuestas, entrevistas y focus group. Al final con el análisis y a las conclusiones que lleguemos se busca demostrar el impacto positivo que ha tenido los empleados de diferentes países y de diferentes culturas que poco a poco han influenciado a la empresa para alcanzar el éxito que ha logrado hasta ahora, y de la misma forma como la empresa ha influenciado en cada una de las vidas de estas personas sin importar el lugar en el que estén laborando, siempre la empresa busca que se sientan parte de ella. Como resultados generales, se obtienen argumentos que sustentan que la implementación del mercadeo interno le permite a la empresa generar ventajas competitivas y dinámicas, que son desarrolladas internamente para un futuro reflejarlas ante los clientes externos. El estudio permitió concluir que el mercadeo interno debe ser una estrategia de comunicación dentro de una empresa convirtiéndose de primera necesidad para la compañía, pues los beneficios que genera son cada vez más necesarios para cada área que abarca el negocio.

Particle and gaseous emissions from compressed natural gas and ultralow sulphur diesel-fuelled buses at four steady engine loads

Exhaust emissions from thirteen compressed natural gas (CNG) and nine ultralow sulphur diesel in-service transport buses were monitored on a chassis dynamometer. Measurements were carried out at idle and at three steady engine loads of 25%, 50% and 100% of maximum power at a fixed speed of 60 kmph. Emission factors were estimated for particle mass and number, carbon dioxide and oxides of nitrogen for two types of CNG buses (Scania and MAN, compatible with Euro 2 and 3 emission standards, respectively) and two types of diesel buses (Volvo Pre-Euro/Euro1 and Mercedez OC500 Euro3). All emission factors increased with load. The median particle mass emission factor for the CNG buses was less than 1% of that from the diesel buses at all loads. However, the particle number emission factors did not show a statistically significant difference between buses operating on the two types of fuel. In this paper, for the very first time, particle number emission factors are presented at four steady state engine loads for CNG buses. Median values ranged from the order of 1012 particles min-1 at idle to 1015 particles km-1 at full power. Most of the particles observed in the CNG emissions were in the nanoparticle size range and likely to be composed of volatile organic compounds The CO2 emission factors were about 20% to 30% greater for the diesel buses over the CNG buses, while the oxides of nitrogen emission factors did not show any difference due to the large variation between buses.

Radiographic outcomes over time after endoscopic anterior scoliosis correction

A prospective, consecutive series of 106 patients receiving endoscopic anterior scoliosis correction. The aim was to analyse changes in radiographic parameters and rib hump in the two years following surgery. Endoscopic anterior scoliosis correction is a level sparing approach, therefore it is important to assess the amount of decompensation which occurs after surgery. All patients received a single anterior rod and vertebral body screws using a standard compression technique. Cleared disc spaces were packed with either mulched femoral head allograft or rib head/iliac crest autograft. Radiographic parameters (major, instrumented, minor Cobb, T5-T12 kyphosis) and rib hump were measured at 2,6,12 and 24 months after surgery. Paired t-tests and Wilcoxon signed ranks tests were used to assess the statistical significant of changes between adjacent time intervals.----- Results: Mean loss of major curve correction from 2 to 24 months after surgery was 4 degrees. Mean loss of rib hump correction was 1.4 degrees. Mean sagittal kyphosis increased from 27 degrees at 2 months to 30.6 degrees at 24 months. Rod fractures and screw-related complications resulted in several degrees less correction than patients without complications, but overall there was no clinically significant decompensation following complications. The study concluded that there are small changes in deformity measures after endoscopic anterior scoliosis surgery, which are statistically significant but not clinically significant.

Percutaneous insertion of Dual Growth Rods using a new mobile bearing implant

Growth rods are commonly used for the treatment of scoliosis in the immature spine. Many variations have been proposed but breakage of implants is a common problem. Growth rod insertion commonly involves large exposures at initial insertion followed by multiple smaller procedures for lengthening. We present our early experiences using a percutaneous technique of insertion of a new titanium mobile bearing implant (Medtronic Inc). The implant allows some rotatory motion in the middle of the construct thus reducing construct stresses and thus possibly reducing rod breakage risk. Based on this small initial series with 12 months follow-up, percutaneous insertion of growth rods using the new implant is a safe and reliable technique although the infection rate in our sample was of note. This may be related to the titanium wear and inflammation seen in the soft tissues at time of operation and visualised on histology. No implants have required removal due to infection, and all infections were treated with debridement at next lengthening and suppressive antibiotics. Propionibacterium is one of the commonest infections seen with spinal implants and sometimes does not respond to simple antibiotic suppression. The technique allows preservation of the soft tissues until definitive fusion is needed and may lead to a decrease in hospital stay. The implant is low profile and seems to offer advantages over other systems on the market. Further follow up is needed to look at longer term outcomes with this new implant type.

Effect of bone graft type on fusion rates following endoscopic anterior scoliosis correction

Bone graft is generally considered fundamental in achieving solid fusion in scoliosis correction and pseudarthrosis following instrumentation may predispose to implant failure. In endoscopic anterior-instrumented scoliosis surgery, autologous rib or iliac crest graft has been utilised traditionally but both techniques increase operative duration and cause donor site morbidity. Allograft bone and bone- morphogenetic-protein alternatives may improve fusion rates but this remains controversial. This study's objective was to compare two-year postoperative fusion rates in a series of patients who underwent endoscopic anterior instrumentation for thoracic scoliosis utilising various bone graft types. Significantly better rates of fusion occurred in endoscopic anterior instrumented scoliosis correction using femoral allograft compared to autologous rib-heads and iliac crest graft. This may be partly explained by the difficulty obtaining sufficient quantities of autologous graft. Lower fusion rates in the autologous graft group appeared to predispose to rod fracture although the clinical consequence of implant failure is uncertain.

Computed tomography evaluation of axial vertebral derotation in endoscopic anterior instrumentation for adolescent idiopathic scoliosis

Thoracoscopic instrumented anterior spinal fusion for adolescent idiopathic scoliosis (AIS) has clinical benefits that include reduced pulmonary morbidity, postoperative pain, and improved cosmesis. However, quantitative data on radiological improvement of vertebral rotation using this method is lacking. This study’s objectives were to measure preoperative and postoperative axial vertebral rotational deformity at the curve apex in endoscopically-treated anterior-instrumented scoliosis patients using CT, and assess the relevance of these findings to clinically measured chest wall rib hump deformity correction. This is the first quantitative CT study to confirm that endoscopic anterior instrumented fusion for AIS substantially improves axial vertebral body rotational deformity at the apex of the curve. The margin of correction of 43% compares favourably with historically published figures of 24% for patients with posterior all-hook-rod constructs. CT measurements correlated significantly to the clinical outcome of rib hump deformity correction.

Water uptake of aerosols with a focus on seeded aerosols and instrumentation techniques

This thesis focuses on the volatile and hygroscopic properties of mixed aerosol species. In particular, the influence organic species of varying solubility have upon seed aerosols. Aerosol studies were conducted at the Paul Scherrer Institut Laboratory for Atmospheric Chemistry (PSI-LAC, Villigen, Switzerland) and at the Queensland University of Technology International Laboratory for Air Quality and Health (QUT-ILAQH, Brisbane, Australia). The primary measurement tool employed in this program was the Volatilisation and Hygroscopicity Tandem Differential Mobility Analyser (VHTDMA - Johnson et al. 2004). This system was initially developed at QUT within the ILAQH and was completely re-developed as part of this project (see Section 1.4 for a description of this process). The new VHTDMA was deployed to the PSI-LAC where an analysis of the volatile and hygroscopic properties of ammonium sulphate seeds coated with organic species formed from the photo-oxidation of á-pinene was conducted. This investigation was driven by a desire to understand the influence of atmospherically prevalent organics upon water uptake by material with cloud forming capabilities. Of particular note from this campaign were observed influences of partially soluble organic coatings upon inorganic ammonium sulphate seeds above and below their deliquescence relative humidity (DRH). Above the DRH of the seed increasing the volume fraction of the organic component was shown to reduce the water uptake of the mixed particle. Below the DRH the organic was shown to activate the water uptake of the seed. This was the first time this effect had been observed for á-pinene derived SOA. In contrast with the simulated aerosols generated at the PSI-LAC a case study of the volatile and hygroscopic properties of diesel emissions was undertaken. During this stage of the project ternary nucleation was shown, for the first time, to be one of the processes involved in formation of diesel particulate matter. Furthermore, these particles were shown to be coated with a volatile hydrophobic material which prevented the water uptake of the highly hygroscopic material below. This result was a first and indicated that previous studies into the hygroscopicity of diesel emission had erroneously reported the particles to be hydrophobic. Both of these results contradict the previously upheld Zdanovksii-Stokes-Robinson (ZSR) additive rule for water uptake by mixed species. This is an important contribution as it adds to the weight of evidence that limits the validity of this rule.

Defining the flammability of cylindrical metal rods through characterization of the thermal effects of the ignition promoter

All relevant international standards for determining if a metallic rod is flammable in oxygen utilize some form of “promoted ignition” test. In this test, for a given pressure, an overwhelming ignition source is coupled to the end of the test sample and the designation flammable or nonflammable is based upon the amount burned, that is, a burn criteria. It is documented that (1) the initial temperature of the test sample affects the burning of the test sample both (a) in regards to the pressure at which the sample will support burning (threshold pressure) and (b) the rate at which the sample is melted (regression rate of the melting interface); and, (2) the igniter used affects the test sample by heating it adjacent to the igniter as ignition occurs. Together, these facts make it necessary to ensure, if a metallic material is to be considered flammable at the conditions tested, that the burn criteria will exclude any region of the test sample that may have undergone preheating during the ignition process. A two-dimensional theoretical model was developed to describe the transient heat transfer occurring and resultant temperatures produced within this system. Several metals (copper, aluminum, iron, and stainless steel) and ignition promoters (magnesium, aluminum, and Pyrofuze®) were evaluated for a range of oxygen pressures between 0.69 MPa (100 psia) and 34.5 MPa (5,000 psia). A MATLAB® program was utilized to solve the developed model that was validated against (1) a published solution for a similar system and (2) against experimental data obtained during actual tests at the National Aeronautics and Space Administration White Sands Test Facility. The validated model successfully predicts temperatures within the test samples with agreement between model and experiment increasing as test pressure increases and/or distance from the promoter increases. Oxygen pressure and test sample thermal diffusivity were shown to have the largest effect on the results. In all cases evaluated, there is no significant preheating (above about 38°C/100°F) occurring at distances greater than 30 mm (1.18 in.) during the time the ignition source is attached to the test sample. This validates a distance of 30 mm (1.18 in.) above the ignition promoter as a burn length upon which a definition of flammable can be based for inclusion in relevant international standards (that is, burning past this length will always be independent of the ignition event for the ignition promoters considered here. KEYWORDS: promoted ignition, metal combustion, heat conduction, thin fin, promoted combustion, burn length, burn criteria, flammability, igniter effects, heat affected zone.