Utilização de metaheurísticas combinada a diferentes métodos de aglutinação para a otimização de um processo de torneamento com múltiplas respostas

Pós-graduação em Engenharia Mecânica - FEG

Burning Graphene Layer-by-Layer

Graphene, in single layer or multi-layer forms, holds great promise for future electronics and high-temperature applications. Resistance to oxidation, an important property for high-temperature applications, has not yet been extensively investigated. Controlled thinning of multi-layer graphene (MLG), e.g., by plasma or laser processing is another challenge, since the existing methods produce non-uniform thinning or introduce undesirable defects in the basal plane. We report here that heating to extremely high temperatures (exceeding 2000 K) and controllable layer-by-layer burning (thinning) can be achieved by low-power laser processing of suspended high-quality MLG in air in "cold-wall" reactor configuration. In contrast, localized laser heating of supported samples results in non-uniform graphene burning at much higher rates. Fully atomistic molecular dynamics simulations were also performed to reveal details of oxidation mechanisms leading to uniform layer-by-layer graphene gasification. The extraordinary resistance of MLG to oxidation paves the way to novel high-temperature applications as continuum light source or scaffolding material.

Hopping-tunneling model to describe electric charge injection at metal/organic semiconductor heterojunctions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of a new clean methodology with ultrasound-assisted extraction for analysis of sodium in pet foods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fenologia reprodutiva da pitaya vermelha em Jaboticabal, SP

The dragon fruit (Hylocereus undatus) is recent crop cultivation in Brazil and there is still lack of studies to support the farmers. So, this research aimed to characterize the reproductive phenology of the crop in the region of Jaboticabal, Sao Paulo State, Brazil. It was evaluated red dragon fruit clones over two environmental conditions - under plastic screen black and white, with 50% of shady level, from March 2009 to December 2010. It was observed that the issuance of floral buds and the flowering on dragon fruit culture occurs with a combination of high temperatures and rainfall, with constant emission of floral buds from November to March while the flowering on dragon fruit culture occurs until mid-April. The color of plastic screen had influenced on amount of flowers. The time elapsed since the issuance of flower buds to anthesis is from 18 to 23 days, while the harvest occurs from 34 to 43 days after flower opening. At Jaboticabal, the time of appearance of flower bud to fruit harvest is from 52 to 66 days.

Pigments based on Cr and Sb doped TiO2 prepared by microemulsion-mediated solvothermal synthesis for inkjet printing on ceramics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The influence of temperature on oxygen consumption rates of workers of two leaf cutting ants, Atta laevigata (F. Smith, 1858) and Atta sexdens rubropilosa (Forel, 1908)

1. 1. The oxygen consumption in workers of two simpatric leaf cutting ants, Atta laevigata and Atta sexdens rubropilosa was measured at different temperatures. 2. 2. In the temperature range between 5-35°C, with 5°C increments, the respiratory rates increased with temperature, but the R-T curves of both ants showed neither a marked drop at the low end nor a break at the high end; except between 30 and 35°C. 3. 3. The respiratory rates of A. s. rubropilosa were higher than those of A. laevigata and in the midrange of temperatures, the rates of A. laevigata increased faster than those of A. s. rubropilosa. 4. 4. Q10 values did not indicate regions of compensation for temperature in both ants, but suggested that adjustments may occur at high temperatures (25-35°C), as expected for tropical ants. 5. 5. Temperature variations did not alter significantly the slope of the curve relating oxygen consumption and body weight in both species. © 1982.

Ultrasonic sensor signals and optimum path forest classifier for the microstructural characterization of thermally-aged inconel 625 alloy

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Natural rubber latex coated with calcium phosphate for biomedical application

Natural rubber latex (NRL) is a flexible biomembrane that possesses angiogenic properties and has recently been used for guided bone regeneration, enhancing healing without fibrous tissue, allergies or rejection. Calcium phosphate (Ca/P) ceramics have chemical, biological, and mechanical properties similar to mineral phase of bone, and ability to bond to the host tissue, although it can disperse from where it is applied. Therefore, to create a composite that could enhance the properties of both materials, NRL biomembranes were coated with Ca/P. NRL biomembranes were soaked in 1.5 times concentrated SBF solution for seven days, avoiding the use of high temperatures. SEM showed that Ca/P has been coated in NRL biomembrane, XRD showed low crystallinity and FTIR showed that is the carbonated type B. Furthermore, hemolysis of erythrocytes, quantified spectrophotometrically using materials (Ca/P, NRL, and NRL + Ca/P) showed no hemolytic effects up to 0.125 mg/mL (compounds and mixtures), indicating no detectable disturbance of the red blood cell membranes. The results show that the biomimetic is an appropriate method to coat NRL with Ca/P without using high temperatures, aiming a new biomembrane to improve guided bone regeneration.

Construção e avaliação térmica de um sistema concentrador parabólico com seguidor solar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atividade cambial em ramos de Kielmeyera grandiflora (WAWRA) saddi (Callophylaceae) ocorrentes no cerrado paulista

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vacuum infiltration of copper aluminate by liquid aluminium

This paper studies attained microstructures and reactive mechanisms involved in vacuum infiltration of copper aluminate preforms with liquid aluminium. At high temperatures, under vacuum, the inherent alumina film enveloping the metal is overcome, and aluminium is expected to reduce copper aluminate, rendering alumina and copper. Under this approach, copper aluminate toils as a controlled infiltration path for aluminium, resulting in reactive wetting and infiltration of the preforms. Ceramic preforms containing a mixture of Al2O3 and CuAl2O4 were infiltrated with aluminium under distinct vacuum levels and temperatures, and the resulting reaction and infiltration behaviour is discussed. Copper aluminates stability ranges depend on vacuum level and oxygen partial pressure, which determine both CuAl2O4 and CuAlO2 ability for liquid aluminium infiltration. At 1100 °C and 0.76 atm vacuum level CuAl2O4 is stable, indicating pO2 above 0.11 atm. Reactive infiltration is achieved via reaction between aluminium and CuAl2O4; however, fast formation of an alumina film blocking liquid aluminium wicking results in incipient infiltration. At 1000 °C and 3.8 × 10−7 atm vacuum level, CuAlO2 decomposes to Cu and Al2O3 indicating a pO2 below 6.0 × 10−7 atm; infiltration of the ceramic is hindered by the non-wetting behaviour of the resulting metal alloy. At 1000 °C and 1.9 × 10−6 atm vacuum level CuAlO2 is stable, indicating pO2 above 6.0 × 10−7 atm. Extensive infiltration is achieved via redox reaction between aluminium and CuAlO2, rendering a microstructure characterised by uniform distribution of alumina particles amid an aluminium matrix. This work evidences that liquid aluminium infiltration upon copper aluminate-rich preforms is a feasible route to produce Al–matrix alumina-reinforced composites. The associated reduction reaction renders alumina, as fine particulate composite reinforcements, and copper, which dissolves in liquid aluminium contributing as a matrix strengthener.

Metabolismo nutricional em Atta sexdens rubropilosa Forel, 1908: voo nupcial, fundação e desenvolvimento da colônia

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Efeitos da alta temperatura na pigmentação visceral e no epitélio germinativo masculino em Physalaemus nattereri e Leptodactylus fuscus (Anura)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mudanças climáticas previstas para o final do século afetam o desempenho e o desenvolvimento esquelético de larvas de tambaqui (Colossoma macropomum)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)