943 resultados para Metallo-supramolecular Architectures
Resumo:
A particular property of the matched desiredimpulse response receiver is introduced in this paper, namely,the fact that full exploitation of the diversity is obtained withmultiple beamformers when the channel is spatially and timelydispersive. This particularity makes the receiver specially suitablefor mobile and underwater communications. The new structureprovides better performance than conventional and weightedVRAKE receivers, and a diversity gain with no needs of additionalradio frequency equipment. The baseband hardware neededfor this new receiver may be obtained through reconfigurabilityof the RAKE architectures available at the base station. Theproposed receiver is tested through simulations assuming UTRAfrequency-division-duplexing mode.
Resumo:
The application of adaptive antenna techniques to fixed-architecture base stations has been shown to offer wide-ranging benefits, including interference rejection capabilities or increased coverage and spectral efficiency.Unfortunately, the actual implementation ofthese techniques to mobile communication scenarios has traditionally been set back by two fundamental reasons. On one hand, the lack of flexibility of current transceiver architectures does not allow for the introduction of advanced add-on functionalities. On the other hand, theoften oversimplified models for the spatiotemporal characteristics of the radio communications channel generally give rise toperformance predictions that are, in practice, too optimistic. The advent of software radio architectures represents a big step toward theintroduction of advanced receive/transmitcapabilities. Thanks to their inherent flexibilityand robustness, software radio architecturesare the appropriate enabling technology for theimplementation of array processing techniques.Moreover, given the exponential progression ofcommunication standards in coexistence andtheir constant evolution, software reconfigurabilitywill probably soon become the only costefficientalternative for the transceiverupgrade. This article analyzes the requirementsfor the introduction of software radio techniquesand array processing architectures inmultistandard scenarios. It basically summarizesthe conclusions and results obtained withinthe ACTS project SUNBEAM,1 proposingalgorithms and analyzing the feasibility ofimplementation of innovative and softwarereconfigurablearray processing architectures inmultistandard settings.
Beyond EA Frameworks: Towards an Understanding of the Adoption of Enterprise Architecture Management
Resumo:
Enterprise architectures (EA) are considered promising approaches to reduce the complexities of growing information technology (IT) environments while keeping pace with an ever-changing business environment. However, the implementation of enterprise architecture management (EAM) has proven difficult in practice. Many EAM initiatives face severe challenges, as demonstrated by the low usage level of enterprise architecture documentation and enterprise architects' lack of authority regarding enforcing EAM standards and principles. These challenges motivate our research. Based on three field studies, we first analyze EAM implementation issues that arise when EAM is started as a dedicated and isolated initiative. Following a design-oriented paradigm, we then suggest a design theory for architecture-driven IT management (ADRIMA) that may guide organizations to successfully implement EAM. This theory summarizes prescriptive knowledge related to embedding EAM practices, artefacts and roles in the existing IT management processes and organization.
Resumo:
Web-palvelut muodostavat keskeisen osan semanttista web:iä. Ne mahdollistavat nykyaikaisen ja tehokkaan välineistön hajautettuun laskentaan ja luovat perustan palveluperustaisille arkkitehtuureille. Verkottunut automatisoitu liiketoiminta edellyttää jatkuvaa aktiivisuutta kaikilta osapuolilta. Lisäksi sitä tukevan järjestelmäntulee olla joustava ja sen tulee tukea monipuolista toiminnallisuutta. Nämä tavoitteet voidaan saavuttamaan yhdistämällä web-palveluita. Yhdistämisprosessi muodostuu joukosta tehtäviä kuten esim. palveluiden mallintaminen, palveluiden koostaminen, palveluiden suorittaminen ja tarkistaminen. Työssä on toteutettu yksinkertainen liiketoimintaprosessi. Toteutuksen osalta tarkasteltiin vaihtoehtoisia standardeja ja toteutustekniikoita. Myös suorituksen optimointiin liittyvät näkökulmat pyrittiin ottamaan huomioon.
Resumo:
Ponsse Oyj:n kaltainen konfiguroituvaa, monimutkaista tuotetta valmistava yhtiö tarvitsee ehdottomasti nykyaikaisen modulaarisuuteen perustuvan tuoterakennesystematiikan. Käyttämällä osioita eri modulaarisuusmalleista ja soveltamalla niitä Ponssen näkökulmasta kaikkein edullisimmalla tavalla, on kehitetty ensimmäinen case - tapaus ja sen myötä mahdollisimman yksinkertainen toimintamalli. Mallissa on otettu huomioon myös useat tuoterakenteen kanssa vuorovaikutuksessa olevat tekijät. Myyntitilanteen valinnat ovat listattu konfigurointimatriisiin ja ne voivat olla itsenäisiä tai sulkea pois joitakin toisia valintoja. Kun sopiva koneyksilö on muodostettu, saadaan matriisista samantien tulostettua valintojen mukainen tuoteyksilö. Tuoteyksilön moduulirakenne toimii kyseisen, yksittäisen koneen työmääräimenä sekä koneenvalmistuksen dokumenttina, sillä luettelon yksi moduuli on yhden valmistettavantyövaiheen moduulipiirustus alimoduuleineen ja osineen. Moduulipiirustusten on siis otettava huomioon tuotannon, oston, suunnittelun ja dokumentoinnin näkökulmat. Piirustuksen laatijan on tiedettävä kyseisen moduulin valmistus eli koottavan komponenttikokoelman laajuus sekä tuotantolinjan että osto-osaston intressien mukaisesti. Piirustuksen on nivouduttava sitä kutsuvaan matriisiin ja kyseisen moduulin valinnan kytköksiin muihin moduuleihin nähden. Kaiken lisäksi piirustuksen on toimittava kokoonpano-ohjeena sekä jälkimarkkinoinnin työkaluna. Tässä työssä muodostettiin metsätraktorin ohjaamosta esimerkkitapaus. Case tapauksessa käytettiin työssä esitettyä uutta tuoterakennesystematiikkaa uuden modulaarisuussäännöstön käytöstä, laskettu sen aiheuttamat muutokset ja sen tuotantoon otosta on kerätty ensimmäiset kommentit. Esimerkillä pyrittiin saavuttamaan modulaarisen tuoterakenteen mahdollistamat edut ja projektia on jatkettu Ponsse Oyj:llä käsittämään muitakin tuotekokonaisuuksia.
Resumo:
Tämä diplomityö käsittelee kahden sotilaallisen koalition yhteentoimivuuden haasteita ja toteutusta kaupallisintyökaluin. Työ pohjautuu kahteen todelliseen, palvelusuuntautunutta arkkitehtuurisuunnittelua (SOA) hyödyntäneeseen integraatioprojektiin jotka on toteutettu Suomen IBM:n Palveluyksikössä vuosina 2006 - 2007. Työn tavoitteena on ollut tutkia sotilaallisten koalitioiden järjestelmä - ja tiedonvaihtoyhteentoimivuuden menetelmiä, näkökulmia ja teknistä toteutusta kaupallisin ohjelmistotuottein ja yhteistä tietomallia käyttäen. Lisäksi esitetään puolustustoimialan erityispiirteet tietojärjestelmätoimittajien ohjelmistokehitys - prosesseihin liittyen. Tätä varten tutkittiin koalitioiden käyttöön tarkoitettuja olemassa olevia ohjelmistoarkkitehtuureja ja yhteentoimivuusmalleja sekä sovitettiin niitä SOA - arkkitehtuuriajatteluun. Työn teoreettisena pohjana käytettiin organisatorisen ja teknisen yhteentoimivuuden kuvaavaa Layers of Coalition Interoperability (LCI) - mallia, minkä jälkeen mallin teknistä osiota käytettiin pohjana SOA - palveluihin perustuvan esimerkkijärjestelmän kehittämiseen kahden kuvitteellisen koalition tiedonvaihtoa varten. Työn keskeisinä tuloksina on syntynyt suunnitelma koalitioiden taustajärjestelmien yhdistämisestä dynaamisten SOA- palveluiden avulla yhteiseen JC3IEDM - tietomalliin. Tämä tietomalli vuorostaan antaa mahdollisuuden järjestelmän laajentamiseen esimerkiksi avustusjärjestöjen, poliisivoimien ja terveydenhuollon organisaatioiden tarpeisiin.
Resumo:
Although the precise signaling mechanisms underlying the vulnerability of some sub-populations of motoneurons in ALS remain unclear, critical factors such as metallo-proteinase 9 expression, neuronal activity and endoplasmic reticulum stress have been shown to be involved. In the context of SOD1(G93A) ALS mouse model, we previously showed that a two-fold decrease in calreticulin (CRT) is occurring in the vulnerable fast motoneurons. Here, we asked to which extent the decrease in CRT levels was causative to muscle denervation and/or motoneuron degeneration. Toward this goal, a hemizygous deletion of the crt gene in SOD1(G93A) mice was generated since the complete ablation of crt is embryonic lethal. We observed that SOD1(G93A);crt(+/-) mice display increased and earlier muscle weakness and muscle denervation compared to SOD1(G93A) mice. While CRT reduction in motoneurons leads to a strong upregulation of two factors important in motoneuron dysfunction, ER stress and mTOR activation, it does not aggravate motoneuron death. Our results underline a prevalent role for CRT levels in the early phase of muscle denervation and support CRT regulation as a potential therapeutic approach.
Resumo:
Forensic intelligence is a distinct dimension of forensic science. Forensic intelligence processes have mostly been developed to address either a specific type of trace or a specific problem. Even though these empirical developments have led to successes, they are trace-specific in nature and contribute to the generation of silos which hamper the establishment of a more general and transversal model. Forensic intelligence has shown some important perspectives but more general developments are required to address persistent challenges. This will ensure the progress of the discipline as well as its widespread implementation in the future. This paper demonstrates that the description of forensic intelligence processes, their architectures, and the methods for building them can, at a certain level, be abstracted from the type of traces considered. A comparative analysis is made between two forensic intelligence approaches developed independently in Australia and in Europe regarding the monitoring of apparently very different kind of problems: illicit drugs and false identity documents. An inductive effort is pursued to identify similarities and to outline a general model. Besides breaking barriers between apparently separate fields of study in forensic science and intelligence, this transversal model would assist in defining forensic intelligence, its role and place in policing, and in identifying its contributions and limitations. The model will facilitate the paradigm shift from the current case-by-case reactive attitude towards a proactive approach by serving as a guideline for the use of forensic case data in an intelligence-led perspective. A follow-up article will specifically address issues related to comparison processes, decision points and organisational issues regarding forensic intelligence (part II).
Resumo:
VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.
Resumo:
Background: Protein domains represent the basic units in the evolution of proteins. Domain duplication and shuffling by recombination and fusion, followed by divergence are the most common mechanisms in this process. Such domain fusion and recombination events are predicted to occur only once for a given multidomain architecture. However, other scenarios may be relevant in the evolution of specific proteins, such as convergent evolution of multidomain architectures. With this in mind, we study glutaredoxin (GRX) domains, because these domains of approximately one hundred amino acids are widespread in archaea, bacteria and eukaryotes and participate in fusion proteins. GRXs are responsible for the reduction of protein disulfides or glutathione-protein mixed disulfides and are involved in cellular redox regulation, although their specific roles and targets are often unclear. Results: In this work we analyze the distribution and evolution of GRX proteins in archaea,bacteria and eukaryotes. We study over one thousand GRX proteins, each containing at least one GRX domain, from hundreds of different organisms and trace the origin and evolution of the GRX domain within the tree of life. Conclusion: Our results suggest that single domain GRX proteins of the CGFS and CPYC classes have, each, evolved through duplication and divergence from one initial gene that was present in the last common ancestor of all organisms. Remarkably, we identify a case of convergent evolution in domain architecture that involves the GRX domain. Two independent recombination events of a TRX domain to a GRX domain are likely to have occurred, which is an exception to the dominant mechanism of domain architecture evolution.
Resumo:
Background: Bacterial populations are highly successful at colonizing new habitats and adapting to changing environmental conditions, partly due to their capacity to evolve novel virulence and metabolic pathways in response to stress conditions and to shuffle them by horizontal gene transfer (HGT). A common theme in the evolution of new functions consists of gene duplication followed by functional divergence. UlaG, a unique manganese-dependent metallo-b-lactamase (MBL) enzyme involved in L-ascorbate metabolism by commensal and symbiotic enterobacteria, provides a model for the study of the emergence of new catalytic activities from the modification of an ancient fold. Furthermore, UlaG is the founding member of the so-called UlaG-like (UlaGL) protein family, a recently established and poorly characterized family comprising divalent (and perhaps trivalent)metal-binding MBLs that catalyze transformations on phosphorylated sugars and nucleotides. Results: Here we combined protein structure-guided and sequence-only molecular phylogenetic analyses to dissect the molecular evolution of UlaG and to study its phylogenomic distribution, its relatedness with present-day UlaGL protein sequences and functional conservation. Phylogenetic analyses indicate that UlaGL sequences are present in Bacteria and Archaea, with bona fide orthologs found mainly in mammalian and plant-associated Gramnegative and Gram-positive bacteria. The incongruence between the UlaGL tree and known species trees indicates exchange by HGT and suggests that the UlaGL-encoding genes provided a growth advantage under changing conditions. Our search for more distantly related protein sequences aided by structural homology has uncovered that UlaGL sequences have a common evolutionary origin with present-day RNA processing and metabolizing MBL enzymes widespread in Bacteria, Archaea, and Eukarya. This observation suggests an ancient origin for the UlaGL family within the broader trunk of the MBL superfamily by duplication, neofunctionalization and fixation. Conclusions: Our results suggest that the forerunner of UlaG was present as an RNA metabolizing enzyme in the last common ancestor, and that the modern descendants of that ancestral gene have a wide phylogenetic distribution and functional roles. We propose that the UlaGL family evolved new metabolic roles among bacterial and possibly archeal phyla in the setting of a close association with metazoans, such as in the mammalian gastrointestinal tract or in animal and plant pathogens, as well as in environmental settings. Accordingly, the major evolutionary forces shaping the UlaGL family include vertical inheritance and lineage-specific duplication and acquisition of novel metabolic functions, followed by HGT and numerous lineage-specific gene loss events.
Resumo:
Operatiivisen tiedon tuottaminen loppukäyttäjille analyyttistä tarkastelua silmällä pitäen aiheuttaa ongelmia useille yrityksille. Diplomityö pyrkii ratkaisemaan ko. ongelman Teleste Oyj:ssä. Työ on jaettu kolmeen pääkappaleeseen. Kappale 2 selkiyttää On-Line Analytical Processing (OLAP)- käsitteen. Kappale 3 esittelee muutamia OLAP-tuotteiden valmistajia ja heidän arkkitehtuurejaan sekä tyypillisten sovellusalueiden lisäksi huomioon otettavia asioita OLAP käyttöönoton yhteydessä. Kappale 4, tuo esille varsinaisen ratkaisun. Teknisellä arkkitehtuurilla on merkittävä asema ratkaisun rakenteen kannalta. Tässä on sovellettu Microsoft:n tietovarasto kehysrakennetta. Kappaleen 4 edetessä, tapahtumakäsittelytieto muutetaan informaatioksi ja edelleen loppukäyttäjien tiedoksi. Loppukäyttäjät varustetaan tehokkaalla ja tosiaikaisella analysointityökalulla moniulotteisessa ympäristössä. Vaikka kiertonopeus otetaan työssä sovellusesimerkiksi, työ ei pyri löytämään optimaalista tasoa Telesten varastoille. Siitä huolimatta eräitä parannusehdotuksia mainitaan.
Resumo:
Nykyaikaisessa liiketoimintaympäristössä yritysten kriittisiksi resursseiksi ovat muodostuneet liiketoimintaa tukevat tietojärjestelmät. Mahdollisuus hyödyntää näitä resursseja riippuu ko. liiketoiminnalle kriittisten järjestelmien luotettavuudesta ja hyödynnettävien sovellusten saatavuudesta. Eräs tilanne jossa järjestelmien kyky tukea todellisia liiketoimintaprosesseja vaarantuu on katastrofi. Vaikutukseltaan katastrofi voi olla paikallinen tai kattaa laajojakin alueita. Eri tyyppisiin katastrofeihin on varauduttava niiden edellyttämin tavoin. Eräs kriittisten tietojärjestelmien arkkitehtuuriin vaikuttanut trendi 90-luvulla on ollut client/server lähestymistapa. Client/server paradigman mukaan sovellus jaetaan tasoihin siten että esitys-, sovellus- ja tietokantakerrokset voidaan erottaa fyysisesti toisistaan näiden silti muodostaessa loogisesti yhtenäisen kokonaisuuden. Liiketoiminnan näkökulmasta 90- luvun mullistavia IT-uutuuksia olivat toiminnanohjausjärjestelmät, joiden avulla oli mahdollista hallita koko tuotantoketjua ja muita prosessikokonaisuuksia lähes reaaliajassa. Monikerroksisten toiminnanohjausjärjestelmien luotettavuus on osoittautunut haastavavaksi sillä kaikkien kerrosten suojaaminen kaikilta mahdollisilta katastrofeilta täydellisesti on nykyisellä teknologialla mahdotonta. Kompromissien tekemiseksi on oltava selvillä kunkin menetetyn prosessin aiheuttamista taloudellisista ja liiketoiminnallisista vaikutuksista. Tämän vuoksi juuri toiminnanohjausjärjestelmät ovat mielenkiintoisia, vaikuttavathan ne liiketoimintaprosesseihin läpi koko yrityksen prosessiketjun. Monikerroksisten client/server arkkitehtuuriin pohjautuvien toiminnanohjausjärjestelmien suojaamisessa katastrofeilta onkin sovellettava useita tekniikoita ja teknologioita, ja yhdistettävä kokonaisuus prosessikehykseen. Näin voidaan luoda suunnitelmallinen osa IT strategiaa, joka ottaa kantaa liiketoiminnan jatkuvuuteen katastrofitilanteessa ja mahdollistaa nopean ja täydellisen palautumisen kaikissa olosuhteissa.
Resumo:
Tämän diplomityön aiheena oli tutkia ATM-moduulin järjestelmätestaustarpeita. ATM-moduuli on osa Nokian kolmannen generaation matkapuhelinverkkoarkkitehtuuria. Työ tehtiin Nokia Networks Oyj:lle MSC&HLR-tuotelinjan järjestelmätestausjaokselle. Työssä käsitellään aluksi GSM- ja UMTS-verkkojen arkkitehtuureja, protokollia ja toimintoja, sekä tutustutaan ATM-tekniikkaan, jota käytetään UMTS-liityntäverkon tiedonvälityksessä. Tämän jälkeen perehdytään ATM-moduulin rakenteeseen ja toimintoihin. Työssä perehdytään järjestelmätestauksen eri osa-alueisiin, niiden testilaitteille asettamiin vaatimuksiin sekä hahmotellaan järjestelmätestauksen päälinjoja.
Resumo:
Tässä diplomityössä tutkitaan tehdasjärjestelmien uusintaan vaikuttavia tekijöitä, kun tarkoituksena on siirtyä yhtenäisiin tuotepohjaisiin järjestelmäratkaisuihin usean paperitehtaan ympäristössä. Paperitehtaan tehdasjärjestelmän avulla hallitaan tehtaan toimintaa alkaen tilauksen saapumisesta tehtaalle aina valmiin tuotteen varastointiin sekä asiakkaalle toimitukseen saakka. Työn pääasiallinen tarkoitus on tutkia erilaisten teknisten arkkitehtuurien, kuten keskitetyn tai hajautetun palvelinympäristön vaikutusta järjestelmän käyttövarmuuteen, käytettävyyteen sekä järjestelmän elinkaaren aikaisiin kustannuksiin. Tietojärjestelmien keskittämiseen ja konsolidointiin liittyen tutkitaan mm. vaikutuksia liityntöjen ja raportoinnin hallintaan sekä tietoverkoille asetettavia vaatimuksia. Työssä tutkitaan myös tuotepohjaisten järjestelmien räätälöintitarpeita ja siihen liittyvää vaatimusmäärittelyä. Työssä esitettyjä näkemyksiä voidaan käyttää päätösten tukena, kun pohditaan toteutettavan tietojärjestelmän teknisen infrastruktuurin optimaalisinta rakennetta.