Loss of resting bradycardia with detraining is associated with intrinsic heart rate changes

The mechanisms underlying the loss of resting bradycardia with detraining were studied in rats. The relative contribution of autonomic and non-autonomic mechanisms was studied in 26 male Wistar rats (180-220 g) randomly assigned to four groups: sedentary (S, N = 6), trained (T, N = 8), detrained for 1 week (D1, N = 6), and detrained for 2 weeks (D2, N = 6). T, D1 and D2 were treadmill trained 5 days/week for 60 min with a gradual increase towards 50% peak VO2. After the last training session, D1 and D2 were detrained for 1 and 2 weeks, respectively. The effect of the autonomic nervous system in causing training-induced resting bradycardia and in restoring heart rate (HR) to pre-exercise training level (PET) with detraining was examined indirectly after cardiac muscarinic and adrenergic receptor blockade. T rats significantly increased peak VO2 by 15 or 23.5% when compared to PET and S rats, respectively. Detraining reduced peak VO2 in both D1 and D2 rats by 22% compared to T rats, indicating loss of aerobic capacity. Resting HR was significantly lower in T and D1 rats than in S rats (313 ± 6.67 and 321 ± 6.01 vs 342 ± 12.2 bpm) and was associated with a significantly decreased intrinsic HR (368 ± 6.1 and 362 ± 7.3 vs 390 ± 8 bpm). Two weeks of detraining reversed the resting HR near PET (335 ± 6.01 bpm) due to an increased intrinsic HR in D2 rats compared with T and D1 rats (376 ± 8.8 bpm). The present study provides the first evidence of intrinsic HR-mediated loss of resting bradycardia with detraining in rats.

Metal additive manufacturing of internal flow channels with powder bed fusion processes

This thesis studies the advantages, disadvantages and possibilities of additive manufacturing in making components with internal flow channels. These include hydraulic components, components with cooling channels and heat exchangers. Processes studied in this work are selective laser sintering and selective laser melting of metallic materials. The basic principles of processes and parameters involved in the process are presented and different possibilities of internal channel manufacturing and flow improvement are introduced

Risk factors for excess weight loss and hypernatremia in exclusively breast-fed infants

Data were prospectively obtained from exclusively breast-fed healthy term neonates at birth and from healthy mothers with no obstetric complication to determine risk factors for excess weight loss and hypernatremia in exclusively breast-fed infants. Thirty-four neonates with a weight loss > or = 10% were diagnosed between April 2001 and January 2005. Six of 18 infants who were eligible for the study had hypernatremia. Breast conditions associated with breast-feeding difficulties (P < 0.05), primiparity (P < 0.005), less than four stools (P < 0.001), pink diaper (P < 0.001), delay at initiation of first breast giving (P < 0.01), birth by cesarean section (P < 0.05), extra heater usage (P < 0.005), extra heater usage among mothers who had appropriate conditions associated with breast-feeding (P < 0.001), mean weight loss in neonates with pink diaper (P < 0.05), mean uric acid concentration in neonates with pink diaper (P < 0.0001), fever in hypernatremic neonates (P < 0.02), and the correlation of weight loss with both serum sodium and uric acid concentrations (P < 0.02) were determined. Excessive weight loss occurs in exclusively breast-fed infants and can be complicated by hypernatremia and other morbidities. Prompt initiation of breast-feeding after delivery and prompt intervention if problems occur with breast-feeding, in particular poor breast attachment, breast engorgement, delayed breast milk "coming in", and nipple problems will help promote successful breast-feeding. Careful follow-up of breast-feeding dyads after discharge from hospital, especially regarding infant weight, is important to help detect inadequate breast-feeding. Environmental factors such as heaters may exacerbate infant dehydration.

Emission, kinetic and magnetic phenomena in rare-earth and transition metal doped ZnSe single crystals

In this work emission, optical, electrical and magnetic properties of the d- and f- elements doped zinc selenide crystals were investigated within a wide temperature range. Doping was performed in various technological processes: during the growth by chemical vapor transport method; by thermal diffusion from the Bi or Zn melt. Concentration of the doping impurity in the crystals was controlled by amount of the dopant in the source material or by its concentration in the doping media. Special interest in the work was paid to the influence of the different concentrations of Cr and Yb impurities on ZnSe crystals’ properties, correlations between observed effects and similarities with the Ni, Mn and Gd dopants are analysed. Possibility of formation of the excitons bound to the doping d-ions was shown. In contrast to this, it was observed that f-elements do not bound excitons, but prevent formation of excitons bound to some uncontrolled impurities. A mechanism of Cr doping impurity interaction with background impurities and zinc selenide structural defects was proposed based on experimental data. An assumption about resonant energy transfer between double charged chromium ions and complexes based on crystals’ vacancy defects was made. A correlation between emission and magnetic properties of the d- ions doped samples was established. Based on this correlation a mechanism explaining the concentration quench of the emission was proposed. It was found that f-ions bind electrically active shallow and deep donor and acceptor states of background impurity to electrically neutral complexes. This may be observed as “purification” of ZnSe crystals by doping with the rare-earth elements, resulting i tendency of the properties of f-ion doped crystals to the properties of intrinsic crystals, but with smaller concentration of uncontrolled native and impurity defects. A possible interpretation of this effect was proposed. It was shown that selenium substituting impurities decrease efficiency of the Yb doping. Based on this experimental results an attempt to determine ytterbium ion surroundings in the crystal lattice was made. It was shown that co-doping of zinc selenide crystals with the d- and f- ions leads to the combination of the impurities influence on the material’s properties. On the basis of obtained data an interaction mechanism of the d- and f-elements co-dopants was proposed. Guided by the model of the ytterbium ion incorporation in the selenide sublattice of the ZnSe crystals, an assumption about stabilization of single charged chromium ions in the zinc sublattice crystal nodes, by means of formation of the local charge compensating clusters, was made.

Analytic evaluation of three-phase short circuit demagnetization and hysteresis loss risk in rotor-surface-magnet Permanent-Magnet Synchronous Machines

Permanent magnet synchronous machines (PMSM) have become widely used in applications because of high efficiency compared to synchronous machines with exciting winding or to induction motors. This feature of PMSM is achieved through the using the permanent magnets (PM) as the main excitation source. The magnetic properties of the PM have significant influence on all the PMSM characteristics. Recent observations of the PM material properties when used in rotating machines revealed that in all PMSMs the magnets do not necessarily operate in the second quadrant of the demagnetization curve which makes the magnets prone to hysteresis losses. Moreover, still no good analytical approach has not been derived for the magnetic flux density distribution along the PM during the different short circuits faults. The main task of this thesis is to derive simple analytical tool which can predict magnetic flux density distribution along the rotor-surface mounted PM in two cases: during normal operating mode and in the worst moment of time from the PM’s point of view of the three phase symmetrical short circuit. The surface mounted PMSMs were selected because of their prevalence and relatively simple construction. The proposed model is based on the combination of two theories: the theory of the magnetic circuit and space vector theory. The comparison of the results in case of the normal operating mode obtained from finite element software with the results calculated with the proposed model shows good accuracy of model in the parts of the PM which are most of all prone to hysteresis losses. The comparison of the results for three phase symmetrical short circuit revealed significant inaccuracy of the proposed model compared with results from finite element software. The analysis of the inaccuracy reasons was provided. The impact on the model of the Carter factor theory and assumption that air have permeability of the PM were analyzed. The propositions for the further model development are presented.

Long-term loss of color vision after exposure to mercury vapor

We evaluated the color vision of 24 subjects (41.6 ± 6.5 years; 6 females) who worked in fluorescent lamp industries. They had been occupationally exposed to mercury vapor (10.6 ± 5.2 years) and had been away from the source of exposure for 6.4 ± 4.04 years. Mean urinary concentration of mercury was 40.6 ± 36.4 µg/g creatinine during or up to 1 year after exposure and 2.71 ± 1.19 µg/g creatinine at the time of color vision testing or up to 1 year thereafter. All patients were diagnosed with chronic mercury intoxication, characterized by clinical symptoms and neuropsychological alterations. A control group (N = 36, 48.6 ± 11.9 years, 10 females, 1.5 ± 0.47 µg mercury/g creatinine) was subjected to the same tests. Inclusion criteria for both groups were Snellen VA 20/30 or better and absence of known ophthalmologic pathologies. Color discrimination was assessed with the Farnsworth D-15 test (D-15) and with the Lanthony D-15d test (D-15d). Significant differences were found between the two eyes of the patients (P < 0.001) in both tests. Results for the worst eye were also different from controls for both tests: P = 0.014 for D-15 and P < 0.001 for D-15d. As shown in previous studies, the D-15d proved to be more sensitive than the D-15 for the screening and diagnosis of the color discrimination losses. Since color discrimination losses were still present many years after the end of exposure, they may be considered to be irreversible, at least under the conditions of the present study.

Cost Reduction of Permanent Magnet Synchronous Machines

Electrical machine drives are the most electrical energy-consuming systems worldwide. The largest proportion of drives is found in industrial applications. There are, however many other applications that are also based on the use of electrical machines, because they have a relatively high efficiency, a low noise level, and do not produce local pollution. Electrical machines can be classified into several categories. One of the most commonly used electrical machine types (especially in the industry) is induction motors, also known as asynchronous machines. They have a mature production process and a robust rotor construction. However, in the world pursuing higher energy efficiency with reasonable investments not every application receives the advantage of using this type of motor drives. The main drawback of induction motors is the fact that they need slipcaused and thus loss-generating current in the rotor, and additional stator current for magnetic field production along with the torque-producing current. This can reduce the electric motor drive efficiency, especially in low-speed, low-power applications. Often, when high torque density is required together with low losses, it is desirable to apply permanent magnet technology, because in this case there is no need to use current to produce the basic excitation of the machine. This promotes the effectiveness of copper use in the stator, and further, there is no rotor current in these machines. Again, if permanent magnets with a high remanent flux density are used, the air gap flux density can be higher than in conventional induction motors. These advantages have raised the popularity of PMSMs in some challenging applications, such as hybrid electric vehicles (HEV), wind turbines, and home appliances. Usually, a correctly designed PMSM has a higher efficiency and consequently lower losses than its induction machine counterparts. Therefore, the use of these electrical machines reduces the energy consumption of the whole system to some extent, which can provide good motivation to apply permanent magnet technology to electrical machines. However, the cost of high performance rare earth permanent magnets in these machines may not be affordable in many industrial applications, because the tight competition between the manufacturers dictates the rules of low-cost and highly robust solutions, where asynchronous machines seem to be more feasible at the moment. Two main electromagnetic components of an electrical machine are the stator and the rotor. In the case of a conventional radial flux PMSM, the stator contains magnetic circuit lamination and stator winding, and the rotor consists of rotor steel (laminated or solid) and permanent magnets. The lamination itself does not significantly influence the total cost of the machine, even though it can considerably increase the construction complexity, as it requires a special assembly arrangement. However, thin metal sheet processing methods are very effective and economically feasible. Therefore, the cost of the machine is mainly affected by the stator winding and the permanent magnets. The work proposed in this doctoral dissertation comprises a description and analysis of two approaches of PMSM cost reduction: one on the rotor side and the other on the stator side. The first approach on the rotor side includes the use of low-cost and abundant ferrite magnets together with a tooth-coil winding topology and an outer rotor construction. The second approach on the stator side exploits the use of a modular stator structure instead of a monolithic one. PMSMs with the proposed structures were thoroughly analysed by finite element method based tools (FEM). It was found out that by implementing the described principles, some favourable characteristics of the machine (mainly concerning the machine size) will inevitable be compromised. However, the main target of the proposed approaches is not to compete with conventional rare earth PMSMs, but to reduce the price at which they can be implemented in industrial applications, keeping their dimensions at the same level or lower than those of a typical electrical machine used in the industry at the moment. The measurement results of the prototypes show that the main performance characteristics of these machines are at an acceptable level. It is shown that with certain specific actions it is possible to achieve a desirable efficiency level of the machine with the proposed cost reduction methods.

Impact of marked weight loss induced by bariatric surgery on bone mineral density and remodeling

Data about the impact of bariatric surgery (BS) and subsequent weight loss on bone are limited. The objective of the present study was to determine bone mineral density (BMD), bone remodeling metabolites and hormones that influence bone trophism in premenopausal women submitted to BS 9.8 months, on average, before the study (OGg, N = 16). The data were compared to those obtained for women of normal weight (CG, N = 11) and for obese women (OG, N = 12). Eight patients in each group were monitored for one year, with the determination of BMD, of serum calcium, phosphorus, magnesium, parathyroid hormone, 25-hydroxyvitamin D, insulin-like growth factor-I (IGF-I) and osteocalcin, and of urinary calcium and deoxypyridinoline. The biochemical determinations were repeated every three months in the longitudinal study and BMD was measured at the end of the study. Parathyroid hormone levels were similar in the three groups. IGF-I levels (CG = 332 ± 62 vs OG = 230 ± 37 vs OGg = 128 ± 19 ng/mL) were significantly lower in the operated patients compared to the non-operated obese women. Only OGg patients presented a significant fall in BMD of 6.2% at L1-L4, of 10.2% in the femoral neck, and of 5.1% in the forearm. These results suggest that the weight loss induced by BS is associated with a significant loss of bone mass even at sites that are not influenced by weight overload, with hormonal factors such as IGF-I being associated with this process.

Genetic variations of EBV-LMP1 from nasopharyngeal carcinoma biopsies: potential loss of T cell epitopes

To find Epstein-Barr virus (EBV) strains with genetic variations of EBV latent membrane protein 1 (EBV-LMP1) from nasopharyngeal carcinoma (NPC), the full-length DNA of LMP1 genes from 21 NPC biopsies obtained in Hunan province in southern China was amplified and sequenced. Our sequences were compared to those previously reported by the Clustal V method. Results showed that all 21 sequences displayed two amino acid changes most frequently in LMP1 of CD4+ T cell epitopes at codons 144 (F®I, 21/21) and 212 (G®S, 19/21) or (G®N, 2/21). We also show that type A EBV strain is prevalent in the cases of NPC from Hunan province with a 30-bp 18/21 deletion, and we highlight that this deletion resulted in loss of one of the CD4+ T cell-restricted epitopes. The other 3 sequences without this deletion all had a change at codon 344 (G®D). Furthermore, in the major epitope sequence of CD8+ T cells restricted by HLA-A2, all 21 sequences showed changes at codons 126 (L®F) and 129 (M®I). Our study discovered that one of the 21 sequence variations harbored a new change at codon 131 (W®C), and 5/21 specimens showed another novel change at codon 115 (G®A) in the major epitope sequence of CD8+ T cells restricted by HLA-A2. Our study suggests that these sequence variations of NPC-derived LMP1 may lead to a potential escape from host cell immune recognition, protecting latent EBV infection and causing an increase in tumorigenicity.

Association of loss of heterozygosity with cytogenetic abnormalities in acute myeloid leukemia and myelodysplastic syndrome

Deletions on chromosomes 5 and 7 are frequently seen in myelodysplastic syndrome (MDS) and acute myeloid leukemia (AML). It is assumed that these deletions indicate loss of tumor suppressor genes on these chromosomes and until these tumor suppressor genes are identified, the functional consequences of these deletions and the molecular basis of these myeloid disorders cannot be completely understood. We evaluated loss of heterozygosity (LOH) in 44 patients (18 MDS and 26 AML, diagnosed according to WHO classification criteria) at diagnosis, using a four-microsatellite marker panel: an intragenic marker on the 7th intron of gene IRF-1 of the 5q31.1 region and three markers located inside the 7q31.1 region and correlated the LOH with karyotype abnormalities. The microsatellites chosen corresponded to chromosome regions frequently deleted in MDS/AML. The samples with Q (peak area) less than or equal to 0.50 were indicative of LOH. The percent of informative samples (i.e., heterozygous) for the intragenic microsatellite in gene IRF-1 and in loci D7S486, D7S515 and D7S522 were 66.6, 73.7, 75.5, and 48.8%, respectively. Cytogenetic abnormalities by G-banding were found in 36% (16/44) of the patients (2 of 18 MDS and 14 of 26 AML patients). We found a significantly positive association of the occurrence of LOH with abnormal karyotype (P < 0.05; chi-square test) and there were cases with LOH but the karyotype was normal (by G-banding). These data indicate that LOH in different microsatellite markers is possibly an event previous to chromosomal abnormalities in these myeloid neoplasias.

Classification and hearing evolution of patients with sudden sensorineural hearing loss

The aim of this study was to analyze clinical aspects, hearing evolution and efficacy of clinical treatment of patients with sudden sensorineural hearing loss (SSNHL). This was a prospective clinical study of 136 consecutive patients with SSNHL divided into three groups after diagnostic evaluation: patients with defined etiology (DE, N = 13, 10%), concurrent diseases (CD, N = 63, 46.04%) and idiopathic sudden sensorineural hearing loss (ISSHL, N = 60, 43.9%). Initial treatment consisted of prednisone and pentoxifylline. Clinical aspects and hearing evolution for up to 6 months were evaluated. Group CD comprised 73% of patients with metabolic decompensation in the initial evaluation and was significantly older (53.80 years) than groups DE (41.93 years) and ISSHL (39.13 years). Comparison of the mean initial and final hearing loss of the three groups revealed a significant hearing improvement for group CD (P = 0.001) and group ISSHL (P = 0.001). Group DE did not present a significant difference in thresholds. The clinical classification for SSNHL allows the identification of significant differences regarding age, initial and final hearing impairment and likelihood of response to therapy. Elevated age and presence of coexisting disease were associated with a greater initial hearing impact and poorer hearing recovery after 6 months. Patients with defined etiology presented a much more limited response to therapy. The occurrence of decompensated metabolic and cardiovascular diseases and the possibility of first manifestation of auto-immune disease and cerebello-pontine angle tumors justify an adequate protocol for investigation of SSNHL.

Glomerular damage as a predictor of renal allograft loss

Interstitial fibrosis and tubular atrophy (IF/TA) are the most common cause of renal graft failure. Chronic transplant glomerulopathy (CTG) is present in approximately 1.5-3.0% of all renal grafts. We retrospectively studied the contribution of CTG and recurrent post-transplant glomerulopathies (RGN) to graft loss. We analyzed 123 patients with chronic renal allograft dysfunction and divided them into three groups: CTG (N = 37), RGN (N = 21), and IF/TA (N = 65). Demographic data were analyzed and the variables related to graft function identified by statistical methods. CTG had a significantly lower allograft survival than IF/TA. In a multivariate analysis, protective factors for allograft outcomes were: use of angiotensin-converting enzyme inhibitor (ACEI; hazard ratio (HR) = 0.12, P = 0.001), mycophenolate mofetil (MMF; HR = 0.17, P = 0.026), hepatitis C virus (HR = 7.29, P = 0.003), delayed graft function (HR = 5.32, P = 0.016), serum creatinine ≥1.5 mg/dL at the 1st year post-transplant (HR = 0.20, P = 0.011), and proteinuria ≥0.5 g/24 h at the 1st year post-transplant (HR = 0.14, P = 0.004). The presence of glomerular damage is a risk factor for allograft loss (HR = 4.55, P = 0.015). The presence of some degree of chronic glomerular damage in addition to the diagnosis of IF/TA was the most important risk factor associated with allograft loss since it could indicate chronic active antibody-mediated rejection. ACEI and MMF were associated with better outcomes, indicating that they might improve graft survival.

Predictors of restenosis after percutaneous coronary intervention using bare-metal stents: a comparison between patients with and without dysglycemia

The objective of this study was to identify intravascular ultrasound (IVUS), angiographic and metabolic parameters related to restenosis in patients with dysglycemia. Seventy consecutive patients (77 lesions) selected according to inclusion and exclusion criteria were evaluated by the oral glucose tolerance test and the determination of insulinemia after a successful percutaneous coronary intervention (PCI) with a bare-metal stent. The degree of insulin resistance was calculated by the homeostasis model assessment of insulin resistance (HOMA-IR). Six-month IVUS and angiogram follow-up were performed. Thirty-nine patients (55.7%) had dysglycemia. The restenosis rate in the dysglycemic group was 37.2 vs 23.5% in the euglycemic group (P = 0.299). The predictors of restenosis using bivariate analysis were reference vessel diameter (RVD): £2.93 mm (RR = 0.54; 95%CI = 0.05-0.78; P = 0.048), stent area (SA): <8.91 mm² (RR = 0.66; 95%CI = 0.24-0.85; P = 0.006), stent volume (SV): <119.75 mm³ (RR = 0.74; 95%CI = 0.38-0.89; P = 0.0005), HOMA-IR: >2.063 (RR = 0.44; 95%CI = 0.14-0.64; P = 0.027), and fasting plasma glucose (FPG): ≤108.8 mg/dL (RR = 0.53; 95%CI = 0.13-0.75; P = 0.046). SV was an independent predictor of restenosis by multivariable analysis. Dysglycemia is a common clinical condition in patients submitted to PCI. The degree of insulin resistance, FPG, RVD, SA, and SV were correlated with restenosis. SV was inversely correlated with an independent predictor of restenosis in patients treated with a bare-metal stent.

A link between sleep loss, glucose metabolism and adipokines

The present review evaluates the role of sleep and its alteration in triggering problems of glucose metabolism and the possible involvement of adipokines in this process. A reduction in the amount of time spent sleeping has become an endemic condition in modern society, and a search of the current literature has found important associations between sleep loss and alterations of nutritional and metabolic contexts. Studies suggest that sleep loss is associated with problems in glucose metabolism and a higher risk for the development of insulin resistance and type 2 diabetes mellitus. The mechanism involved may be associated with the decreased efficacy of regulation of the hypothalamus-pituitary-adrenal axis by negative feedback mechanisms in sleep-deprivation conditions. In addition, changes in the circadian pattern of growth hormone (GH) secretion might also contribute to the alterations in glucose regulation observed during sleep loss. On the other hand, sleep deprivation stress affects adipokines - increasing tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) and decreasing leptin and adiponectin -, thus establishing a possible association between sleep-debt, adipokines and glucose metabolism. Thus, a modified release of adipokines resulting from sleep deprivation could lead to a chronic sub-inflammatory state that could play a central role in the development of insulin resistance and type 2 diabetes mellitus. Further studies are necessary to investigate the role of sleep loss in adipokine release and its relationship with glucose metabolism.

Hypoxic-ischemic injury decreases anxiety-like behavior in rats when associated with loss of tyrosine-hydroxylase immunoreactive neurons of the substantia nigra

Neonatal Sprague-Dawley rats were randomly divided into normal control, mild hypoxia-ischemia (HI), and severe HI groups (N = 10 in each group at each time) on postnatal day 7 (P7) to study the effect of mild and severe HI on anxiety-like behavior and the expression of tyrosine hydroxylase (TH) in the substantia nigra (SN). The mild and severe HI groups were exposed to hypoxia (8% O2/92% N2) for 90 and 150 min, respectively. The elevated plus-maze (EPM) test was performed to assess anxiety-like behavior by measuring time spent in the open arms (OAT) and OAT%, and immunohistochemistry was used to determine the expression of TH in the SN at P14, P21, and P28. OAT and OAT% in the EPM were significantly increased in both the mild (1.88-, 1.99-, and 2.04-fold, and 1.94-, 1.51-, and 1.46-fold) and severe HI groups (1.69-, 1.68-, and 1.87-fold, and 1.83-, 1.43-, and 1.39-fold, respectively; P < 0.05). The percent of TH-positive cells occupying the SN area was significantly and similarly decreased in both the mild (17.7, 40.2, and 47.2%) and severe HI groups (16.3, 32.2, and 43.8%, respectively; P < 0.05). The decrease in the number of TH-positive cells in the SN and the level of protein expression were closely associated (Pearson correlation analysis: r = 0.991, P = 0.000 in the mild HI group and r = 0.974, P = 0.000 in the severe HI group) with the impaired anxiety-like behaviors. We conclude that neonatal HI results in decreased anxiety-like behavior during the juvenile period of Sprague-Dawley rats, which is associated with the decreased activity of TH in the SN. The impairment of anxiety and the expression of TH are not likely to be dependent on the severity of HI.