Quasinormal modes of black holes immersed in a strong magnetic field

We found quasinormal modes, both in time and frequency domains, of the Ernst black holes, that is neutral black holes immersed in an external magnetic field. The Ernst solution reduces to the Schwarzschild solution, when the magnetic field vanishes. It is found that the quasinormal spectrum for massless scalar field in the vicinity of the magnetized black holes acquires an effective ""mass"" mu = 2B vertical bar m vertical bar, where m is the azimuthal number and B is parameter describing the magnetic field. We shall show that in the presence of a magnetic field quasinormal modes are longer lived and have larger oscillation frequencies. The perturbations of higher-dimensional magnetized black holes by Ortaggio and of magnetized dilaton black holes by Radu are considered. (C) 2007 Elsevier B.V. All rights reserved.

Determination of amino acids by capillary electrophoresis-electrospray ionization-mass spectrometry: An evaluation of different protein hydrolysis procedures

In this work, a CE equipment, online hyphenated to an IT MS analyzer by a linear sheath liquid interface promoting ESI, was used to develop a method for quantitative determination of amino acids. Under appropriate conditions (BGE composition, 0.8% HCOOH, 20% CH(3)OH; sheath liquid composition, 0.8% HCOOH, 60% methanol; V(ESI), +4.50 W), analytical curves of all amino acids from 3 to 80 mg/L were recorded presenting acceptable linearity (r > 0.99). LODs in the range of 16-172 mu mol/L were obtained. BSA, a model protein, was submitted to different hydrolysis procedures (classical acid and basic, and catalyzed by the H(+) form of a cation exchanger resin) and its amino acid profiles determined. In general, the resin-mediated hydrolysis yields were overall similar or better than those obtained by classical acid or basic hydrolysis. The resulting experimental-to-theoretical BSA concentration ratios served as correction factors for the quantitation of amino acids in Brazil nut resin generated hydrolysates.

Zoneamento da vegetação e sua relação com metais pesados na mina Volta Grande, Lavras do Sul, RS

O conhecimento da vegetação em regiões de ocorrências minerais de cobre e ouro torna-se de grande importância para o desenvolvimento de tecnologias limpas na reabilitação de áreas degradadas pela mineração (fitorremediação) e na bioprospecção mineral no Estado. Buscou-se verificar a relação entre a organização espacial e fitossociológica das unidades e subunidades de vegetação na mina Volta Grande, Lavras do Sul, RS e a presença de cobre nas mineralizações. Com base em Ecologia de Paisagem, realizou-se investigações fitossociológicas, avaliação do conteúdo de cobre em raízes e folhas de Axonopus affinis, Eugenia uniflora, Heterothalamus alienus, Saccharum angustifolium, Schizachyrium microstachyum e Schinus lentiscifolius e o zoneamento da vegetação com sobreposição ao mapa de estruturas mineralizadas conhecidas. De acordo com os resultados obtidos, sugere-se que a distribuição das unidades e subunidades de vegetação (unidade de vegetação Eugenia uniflora – Scutia buxifolia, com subunidades Eugenia uniflora – Cupania vernalis e Eugenia uniflora – Allophylus edulis; unidade de vegetação Schinus lentiscifolius – Heterothalamus alienus; unidade de vegetação Eryngium horridum – Saccharum angustifolium, com subunidade Eryngium horridum – Piptochaetium montevidense e unidade de vegetação Axonopus affinis – Paspalum pumilum) pode estar relacionada à posição geomorfológica, à declividade, à umidade do solo e ao manejo para o uso do gado A unidade de vegetação Schinus lentiscifolius – Heterothalamus alienus parece estar relacionada às ocorrências de mineralizações (filões) de cobre e ouro, sendo necessária uma comparação com outras áreas mineralizadas e não-mineralizadas no Estado para utilizar esse dado em prospecção mineral. A espécie Axonopus affinis possui em suas raízes um conteúdo de cobre muito maior do que o considerado normal em plantas, sendo indicada para estudos mais detalhados quanto a sua aplicabilidade na reabilitação de áreas degradadas pela mineração no Rio Grande do Sul.

Sistemas de office banking no Brasil : uma análise competitiva

Uma análise das principais teorias de competitividade, incluindo estudos da Ernst & Young no segmento bancário e teorias de N.Venkatraman, Michael Porter e Nigel Slack. Os principais sistemas de Office Banking do Citibank, no segmento corporativo para serviços de Cash Management são usados como estudo de caso para ilustrar estas teorias, devidamente situados na realidade do segmento de automação bancária e de office banking no Brasil e no mundo neste final de século. Palavras-chave: Cash Management - Electronic Banking - Office Banking - Electronic Delivery - Citibank - Automação bancária - Citigroup - Serviços bancários - Corporate banking

Comparison and analysis of corporate social responsibility (CSR) reports of the top five companies ranked on the 2013 CSR RepTrak

In the 1970s, Corporate Social Responsibility (CSR) was discussed by Nobel laureate Milton Friedman in his article “The Social Responsibility of Business Is to Increase Its Profits.” (Friedman, 1970). His view on CSR was contemptuous as he referred to it as “hypocritical window-dressing” a reflection of the view of Corporate America on CSR back then. For a long time short-term maximization of shareholder value was the only maxim for top management across industries and companies. Over the last decade, CSR has become a more important and relevant factor of a company’s reputation, shifting the discussion from whether CSR is necessary to how best CSR commitments should be done (Smith, 2003). Inevitably, companies do have an environmental, social and economic impact, thereby imposing social costs on current and future generations. In 2013, 50 of the world biggest companies have been responsible for 73 percent of the total carbon dioxide (CO2) emission (Global 500 Climate Change Report 2013). Post et al. (2002) refer to these social costs as a company’s need to retain its “license to operate”. In the late 1990s, CSR reporting was nearly unknown, which drastically changed during the last decade. Allen White, co-founder of the Global Reporting Initiative (GRI), said that CSR reporting”… has evolved from the extraordinary to the exceptional to the expected” (Confino, 2013). In confirmation of this, virtually all of the world’s largest 250 companies report on CSR (93%) and reporting by now appears to be business standard (KPMG, 2013). CSR reports are a medium for transparency which may lead to an improved company reputation (Noked, 2013; Thorne et al, 2008; Wilburn and Wilburn, 2013). In addition, it may be used as part of an ongoing shareholder relations campaign, which may prevent shareholders from submitting Environmental and Social (E&S)1 proposals (Noked, 2013), based on an Ernst & Young report 1 The top five E&S proposal topic areas in 2013 were: 1. Political spending/ lobbying; 2. Environmental sustainability; 3. Corporate diversity/ EEO; 4.Labor/ human rights and 5. Animal testing/ animal welfare. Three groups of environmental sustainability proposal topics of sub-category number two (environmental sustainability) 6 2013, representing the largest category of shareholder proposals submitted. PricewaterhouseCoopers (PwC) even goes as far as to claim that CSR reports are “…becoming critical to a company’s credibility, transparency and endurance.” (PwC, 2013).

Niilismo e técnica: a caminho da ultrapassagem

Pour formuler une discussion sur le nihilisme, l'enquête sur le premier chapitre examine les preuves historiques et philosophiques de montrer que la réflexion sur le nihilisme comme un problème philosophique, suite à l'analyse et la critique du philosophe Friedrich Nietzsche à partir des principaux concepts au sein de son travail: décrépitude, la mort de Dieu, la dévaluation des valeurs, transvaluation des valeurs, volonté de puissance et éternel retour, ils sont quelques-uns des concepts et servir de cadre au point critique de la métaphysique. Le deuxième chapitre est une analyse des idées qui ont émergé de la lecture de Nietzsche qui sont développées entre le philosophe Martin Heidegger et Ernst Jünger. Un dialogue qui limite le nihilisme et ses ramifications pour l'ère de la technique, et finalement vaincre leur pensée ou dépassement.

CENSUS HISTOGRAMS: A SIMPLE FEATURE EXTRACTION and MATCHING APPROACH FOR FACE RECOGNITION

Most face recognition approaches require a prior training where a given distribution of faces is assumed to further predict the identity of test faces. Such an approach may experience difficulty in identifying faces belonging to distributions different from the one provided during the training. A face recognition technique that performs well regardless of training is, therefore, interesting to consider as a basis of more sophisticated methods. In this work, the Census Transform is applied to describe the faces. Based on a scanning window which extracts local histograms of Census Features, we present a method that directly matches face samples. With this simple technique, 97.2% of the faces in the FERET fa/fb test were correctly recognized. Despite being an easy test set, we have found no other approaches in literature regarding straight comparisons of faces with such a performance. Also, a window for further improvement is presented. Among other techniques, we demonstrate how the use of SVMs over the Census Histogram representation can increase the recognition performance.

Influences of thermal and electric load fluctuations in the cogeneration attractiveness

The use of mean values of thermal and electric demand can be justifiable for synthesising the configuration and for estimating the economic results because it simplifies the analysis in a preliminary feasibility study of a cogeneration plant. For determining the cogeneration scheme that best fits the energetic needs of a process several cycles and combinations must be considered, and those technically feasible will be analysed according to economic models. Although interesting for a first approach, this procedure do not consider that the peaks and valleys present in the load patterns will impose additional constraints relatively to the equipment capacities. In this paper, the effects of thermal and electric load fluctuation to the cogeneration plant design were considered. An approach for modelling these load variability is proposed for comparing two competing thermal and electric parity competing schemes. A gas turbine associated to a heat recovery steam generator was then proposed and analysed for thermal- and electric-following operational strategies. Thermal-following option revealed to be more attractive for the technical and economic limits defined for this analysis. (c) 2006 Elsevier Ltd. All rights reserved.

Line-pack management for producing electric power on peak periods

The distribution of natural gas is carried out by means of long ducts and intermediate compression stations to compensate the pressure drops due to friction. The natural gas compressors are usually driven by an electric motor or a gas turbine system, offering possibilities for energy management, one of these consisting in generating energy for use in-plant or to commercialize as independent power producer. It can be done by matching the natural gas demand, at the minimum pressure allowed in the reception point, and the storage capacity of the feed duct with the maximum compressor capacity, for storing the natural gas at the maximum permitted pressure. This allows the gas turbine to drive an electric generator during the time in which the decreasing pressure in duct is above the minimum acceptable by the sink unit. In this paper, a line-pack management analysis is done for an existing compression station considering its actual demand curve for determining the economic feasibility of maintaining the gas turbine system driver generating electricity in a peak and off-peak tariff structure. The potential of cost reduction from the point of view of energy resources (natural gas and electric costs) is also analyzed. (C) 2010 Elsevier Ltd. All rights reserved.

Generating VHDL-AMS models of digital-to-analogue converters from MATLAB (R)/SIMULINK (R)

Today, the trend within the electronics industry is for the use of rapid and advanced simulation methodologies in association with synthesis toolsets. This paper presents an approach developed to support mixed-signal circuit design and analysis. The methodology proposed shows a novel approach to the problem of developing behvioural model descriptions of mixed-signal circuit topologies, by construction of a set of subsystems, that supports the automated mapping of MATLAB (R)/SINIULINK (R) models to structural VHDL-AMS descriptions. The tool developed, named (MSSV)-S-2, reads a SIMULINK (R) model file and translates it to a structural VHDL-AMS code. It also creates the file structure required to simulate the translated model in the SystemVision (TM). To validate the methodology and the developed program, the DAC08, AD7524 and AD5450 data converters were studied and initially modelled in MATLAB (R)/SIMULINK (R). The VHDL-AMS code generated automatically by (MSSV)-S-2, (MATLAB (R)/SIMULINK (R) to SystemVision (TM)), was then simulated in the SystemVision (TM). The simulation results show that the proposed approach, which is based on VHDL-AMS descriptions of the original model library elements, allows for the behavioural level simulation of complex mixed-signal circuits.

Influence of microgap location and configuration on the periimplant bone morphology in submerged implants. An experimental study in dogs

Objectives: The vertical location of the implant-abutment connection influences the periimplant bone morphology. It is unknown, however, whether different microgap configurations cause different bone reactions. Therefore, in this study the bone morphologies of two different implant systems were compared.Material and methods: Three months after tooth extraction in eight mongrel dogs, two grit-blasted screw implants with internal Morse taper connection (ANK group) were placed on one side whereas the contralateral side received two oxidized screw implants with external hex (TIU group). One implant on each side was placed level with the bone (equicrestal), the second implant was inserted 1.5mm below bone level (subcrestal). After 3 months the implants were uncovered. Three months after stage two surgery, histometrical evaluations were performed in order to assess the periimplant bone levels (PBL), the first bone-to-implant contact points (BICP), the width (HBD) and the steepness (SLO) of the bone defect.Results: All implants osseointegrated clinically and histologically. Bone overgrowth of the microgap was seen in ANK implants only. No significant differences between ANK and TIU could be detected in neither vertical position for PBL and BICP. However, a tendency in favor of ANK was visible when the implants were placed subcrestally. In the parameters HBD (ANK equicrestal -0.23mm; TIU equicrestal -0.51mm; ANK subcrestal +0.19mm; TIU subcrestal -0.57mm) and SLO (ANK equicrestal 35.36 degrees; TIU equicrestal 63.22 degrees; ANK subcrestal 20.40 degrees; TIU subcrestal 44.43 degrees) more pronounced and significant differences were noted.Conclusions: Within the limits of this study, it is concluded that different microgap designs cause different shapes and sizes of the periimplant ('dish-shaped') bone defect in submerged implants both in equicrestal and subcrestal positions.