Nanoelectromechanical DRAM for ultra-large-scale integration (ULSI)

A Nanoelectromechanical (NEM) device developed for dynamic random access memory (DRAM) is reported. A vertical nanotube structure is employed to form the electromechanical switch and capacitor structure. The mechanical movement of the nanotube defines 'On' and 'OFF' states and the electrical signals which result lead to charge storage in a vertical capacitor structure as in a traditional DRAM. The vertical structure contributes greatly to a decrease in cell dimension. The main concept of the NEM switch and capacitor can be applied to other memory devices as well. © 2005 IEEE.

HVIC switch for high-frequency power converters

A high voltage integrated circuit (HVIC) switch designed as a building block for power converters operating up to 13.56 MHz from off-line voltages is presented. A CMOS-compatible, 500 V power device process is used to integrate control circuitry with a high-speed MOS gate driver and high voltage lateral power MOSFET. Fabrication of the HVIC switches has proceeded in two stages. The first batch of devices showed switching times of less than 5 ns for the power switch and good high frequency performance of a level-shifter for driving half bridge converters. In the second phase, a switch that monolithically integrates all the elements required to form a complete high-frequency converter has been designed.

Theoretical and numerical investigation of SiC JFET and MOSFET at 6.5 kV

This paper presents a preliminary theoretical and numerical investigation of 4H-SiC JFET and MOSFET at 6.5 kV. To improve the on-state/breakdown performance of the JFET, buried layers in conjunction with a highly doped buffer layer have been used. Trench technology has been employed for the MOSFET. The devices were simulated and optimized using MEDICI[I] simulator. From the comparison between the two devices, it turns out that the JFET offers a better on-state/breakdown trade-off, while the trench MOSFET has the advantage of MOS-control.

Mechanical constraint and loading on ferroelectric memory capacitors

The influence of mechanical constraint imposed by device geometry upon the switching response of a ferroelectric thin film memory capacitor is investigated. The memory capacitor was represented by two-dimensional ferroelectric islands of different aspect ratio, mechanically constrained by surrounding materials. Its ferroelectric non-linear behaviour was modeled by a crystal plasticity constitutive law and calculated using the finite element method. The switching response of the device, in terms of remnant charge storage, was determined as a function of geometry and constraint. The switching response under applied in-plane tensile stress and hydrostatic pressure was also studied experimentally. Our results showed that (1) the capacitor's aspect ratio could significantly affect the clamping behaviour and thus the remnant polarization, (2) it was possible to maximise the switching charge through the optimisation of the device geometry, and (3) it is possible to find a critical switching stress at zero electric field and a critical coercive field at zero residual stress. © 2009 Materials Research Society.

哺乳动物犁鼻器信息素感知及犁鼻器系统特异基因的分子进化研究进展

生物对外界环境中化学物质信号的识别和感知对其生存有着极其重要的意义.大多数哺乳动物具有两条嗅觉通路,主要嗅觉系统(MOS)用来感受普通嗅觉信号,而犁鼻器系统(VNS)则从异常灵敏的程度来识别小范围内特异性的化学感应信号-信息素(pheromone).信息素是一类在同种内个体间传递的物质,可引发群体内与个体交流和生殖相关的一系列生理和行为变化.本文综述了对哺乳动物犁鼻器信息素感知及犁鼻器系统特异(VNS-specific)基因的分子进化研究进展,这些基因包括信息素受体家族V1R和V2R以及离子通道TRPC2,为进一步深入研究哺乳动物信息素感知的分子机制奠定基础。

A comparative study on effects of Immunoster and Immunowall as immunostimulants on some hematological, biochemical and growth indices of farmed great sturgeon juveniles (Huso huso)

Prebiotics are non-digestible food ingredients that profitably affect the host by selectively stimulating the growth and /or activation of one or a limited number of bacteria in the intestine that can enhance host health status. Immunoster (IS) and Immunowall (IW) are prebiotics and immunostimulants derived from the outer cell wall of brewers yeast, Saccharomyces cerevisiae. These substances contain MOS and �-glucans. After a four-week acclimatization period to rearing conditions and basal diet, 450 farmed great sturgeon juveniles weighing 95.58 ± 9.38 g were randomly distributed into 15 fiberglass tanks (2 × 2 × 0.53 m) in five treatments (Control, IS 1%, IW 1%, IS 3%, and IW 3%) in three replicates (completely randomized design) and kept at a density of 30 fish per tank for a period of 8 weeks at water temperature 20.55 ± 5.11ºC, dissolved oxygen 6.73 ± 0.35 mg L-1 and pH 7.92 ± 0.09. IS and IW were added at two levels of 1% and 3% to the basal diet in place of cellulose, except the control. At the beginning, in the middle and at the end of the trial, carcass analysis was done to determine the moisture, protein, fat, ash, and total carbohydrate. Also, blood samples were collected to measure hematological, biochemical and immune indices. At the end of the trial, final weight, final length, body weight increase (BWI), specific growth rate (SGR), average daily growth (ADG), protein efficiency ratio (PER), feed conversion ratio (FCR), and condition factor (CF) in fish fed on IS and IW in both levels 1% and 3% showed some differences. These differences were significant in IS 3% and IW 1% and 3% compared with the control (P<0.05). HSI showed no significant difference (P>0.05) and survival rate was 100% in all treatments. Crude protein of carcass in fish fed on IS and IW at 1% and 3% showed an increase in comparison with the control. There was significant difference between IS 3% and the control in crude protein of carcass (P<0.05). Fish fed on IS and IW at 1% and 3% showed various results in hematological and biochemical factors. It was observed significant difference in MCV between IW 1% and IS 3% compared with the control (P<0.05). Although there was an increase in values of hematocrit, hemoglobin (except IS 1%), WBC (except IW 3%), MCH, neutrophil, total protein, albumin (except IS 3%), K+, and lysozyme in fish fed on IS and IW compared with the control, it was no significant (P>0.05). The maximum count of WBC and the highest value of Ca2+ were seen in IW 1%. The maximum count of lymphocyte, the highest values of total protein, albumin and IgM were recorded in IW 3%. IS 1% had the maximum count of neutrophil and the highest concentration of lysozyme. Based on obtained results, it can be declared that IS and IW at two levels of 1% and 3% can enhance growth performance and feed efficiency and also improve some hematological, biochemical, and immune indices in farmed great sturgeon juveniles.

核基因在鸟类分子系统发育学研究中的应用

核基因作为一种新的遗传标记,近年来被广泛应用于鸟类分子系统发育研究中.核基因与线粒体基因位于不同的遗传载体上,因此被引入到系统发育学研究中为物种树的重建提供独立的证据.常用的外显子标记为重组激活基因1(RAG-1),重组激活基因2(RAG-2),癌基因c-myc,原癌基因c-mos,它们由于缓慢的进化速率而被用于鸟类高级分类阶元的系统学研究中.常用的内含子标记是β纤维蛋白原基因内含子7(β-fibrinogen intron7,β-fibint7),肌红蛋白基因内含子Ⅱ(myoglobin intionⅡ).内含子标记通常与线粒体序列联合使用,形成具有互补系统发育信号的数据集,应用于各种分类阶元的系统学研究中.

The water hyacinth problem and the biological control option in the highland lake region of the upper Nile basin: Uganda's experience

The rapid proliferation and extensive spread of water hyacinth Eichhornia crassipes (Mart) Solms in the highland lakes of the Nile Basin within less than 15 years of introduction into the basin in the 1980s pauses potential environmental and social economic menace if the noxious weed is not controlled soon. The water weed has spread all round Lake Victoria and, in Uganda where infes tation is mos t severe, water hyacinth estimated at 1,330,000 ton smothers over 2,000 ha of the lakeshore (August,1994). Lake Kyoga which already constantly supplies River Nile with the weed is infested with over 570 ha, while over 80% of the river course in Uganda is fringed on either side with an average width of about 5m of water hyacinth. As the impact of infestation with water hyacinth on water quality and availability, transportation by water, fishing activities, fisheries ecology, hydro-power generation etc becomes clear in Uganda, serious discussion is under way on how to control and manage the noxious weed. This paper pauses some of the questions being asked regarding the possible application of mechanical and chemical means to control the water weed.Uganda has already initiated the use of biological control of water hyacinth on Lake Kyoga with a strategy to use two weevils namely Neochetinabruchi and Neochetina eichhorniae. The strategy to build capacity and infrastructure for mass multiplication and deployment of biological control of the weevils in the field developed in Uganda by the Fisheries Research Insti tu te (FIRI) and the Namulonge Agricultural and Animal production Research Insti tute (NAARI) is proposed in outline for evaluation. Plans to deploy this strategy on lake Kyoga are under way

中国鸟类的DNA分类及系统发育研究概述

鸟类分类是鸟类学其他研究领域的基础,近年来分子技术的发展,以及计算机技术的应用为鸟类分类学和鸟类系统演化研究提供了新的研究手段,给传统的系统分类研究带来了新的机遇.Tautz等于2002年首先提出运用DNA序列作为生物分类系统的主要平台,即DNA分类学(DNA Taxonomy).而Hebert等于2003年则首次提出了DNA条形码(DNA Barcoding)的概念,并对其物种分类和鉴定意义予以肯定,建议利用线粒体细胞色素C氧化酶亚单位Ⅰ(COI)的特定区段来做DNA条形编码的基础.在鸟类DNA分类方面,国内学者应用线粒体基因Cut b,COI,c-mos,c-myc,12s rRNA,16s rRNA,ND2,ND3,CR,RAG-1以及核基因myoglobin introⅡ等不同片段对很多类群进行了分类探讨和系统发育研究.但是主要集中在鸡形目及雀形目鸟类.中国是鸟类多样性极其丰富的国家,近年来很多亚种、种及以上分类阶元依然存在问题,因此,中国鸟类物种的分类地位、系统发育与演化关系等依然有很多问题等待深入研究.目前国内基于COI的鸟类分类及系统发育研究有了一些报道,但是真正的DNA条形码工作尚需继续、深入地开展.

Energy recovery from high-frequency clocks using DC-DC converters

Large digital chips use a significant amount of energy to distribute a multi-GHz clock. By discharging the clock network to ground every cycle, the energy stored in this large capacitor is wasted. Instead, the energy can be recovered using an on-chip DC-DC converter. This paper investigates the integration of two DC-DC converter topologies, boost and buck-boost, with a high-speed clock driver. The high operating frequency significantly shrinks the required size of the L and C components so they can be placed on-chip; typical converters place them off-chip. The clock driver and DC-DC converter are able to share the entire tapered buffer chain, including the widest drive transistors in the final stage. To achieve voltage regulation, the clock duty cycle must be modulated; implying only single-edge-triggered flops should be used. However, this minor drawback is eclipsed by the benefits: by recovering energy from the clock, the output power can actually exceed the additional power needed to operate the converter circuitry, resulting in an effective efficiency greater than 100%. Furthermore, the converter output can be used to operate additional power-saving features like low-voltage islands or body bias voltages. ©2008 IEEE.

Trench insulated gate bipolar transistor - a high power switching device

This paper presents a comprehensive theoretical study of the Trench Insulated Gate Bipolar Transistors (TIGBT). Specific physical and geometrical effects, such as the accumulation layer injection, increased channel density, increased channel charge and transversal electric field modulation are discussed. The potential advantages of the Trench IGBT over its conventional planar variant are highlighted. It is concluded that the Trench IGBT is one of the most promising structures in the area of high voltage MOS-controllable switching devices.

Orthorhombic α-moo 3 coatings with lath-shaped morphology developed by SPPS: Applications to super-capacitors

Electrical double-layer capacitors owe their large capacitance to the formation of a double-layer at the electrode/electrolyte interface of high surface area carbon-based electrode materials. Greater electrical energy storage capacity has been attributed to transition metal oxides/nitrides that undergo fast, reversible redox reactions at the electrode surface (pseudo-capacitive behavior) in addition to forming electrical double-layers. Solution Precursor Plasma Spray (SPPS) has shown promise for depositing porous, high surface area transition metal oxides. This investigation explored the potential of SPPS to fabricate a-MoO 3 coatings with micro-structures suitable for use as super-capacitor electrodes. The effects of number of spray passes, spray distance, solution concentration, flow rate and spray velocity on the chemistry and micro-structure of the a-MoO 3 deposits were examined. DTA/TGA, SEM, XRD, and electrochemical analyses were performed to characterize the coatings. The results demonstrate the importance of post-deposition heating of the deposit by subsequent passes of the plasma on the coating morphology. © ASM International.

A structured modelling approach to simulating dynamic behaviours in complex organisations

This article reports a case study application of a systematic approach to modelling complex organisations, centred on simulation modelling (SM). The approach leads to populated instances of complementary model types, in ways that systematically capture, validate and facilitate various uses of organisational understandings, knowledge and data normally distributed amongst multiple knowledge holders. The model-driven approach to decision making enables improved manufacturing responsiveness. Literature on modelling technologies relevant to manufacturing systems organisation design and change is presented, as is literature on production planning and control. This provides a rationale for the development of a new modelling methodology which combines the use of enterprise, causal loop and SM. Subsequently, this article describes how in the case of a specific manufacturing enterprise the combined modelling techniques have informed the choice of alternative production planning and control policies. An example enterprise model of a capacitor manufacturing company is illustrated as derivative causal-loop models that structure and enable the design and use of a general purpose simulation model.

Use of a high-temperature superconducting coil for magnetic energy storage

A high temperature superconducting magnetic energy storage device (SMES) has been realised using a 350 m-long BSCCO tape wound as a pancake coil. The coil is mounted on a cryocooler allowing temperatures down to 17.2 K to be achieved. The temperature dependence of coil electrical resistance R(T) shows a superconducting transition at T 102.5 K. Measurements of the V(I) characteristics were performed at several temperatures between 17.2 K and 101.5 K to obtain the temperature dependence of the critical current (using a 1 νV/cm criterion). Critical currents were found to exceed 100 A for T < 30 K. An electronic DC-DC converter was built in order to control the energy flow in and out of the superconducting coil. The converter consists of a MOS transistor bridge switching at a 80 kHz frequency and controlled with standard Pulse Width Modulation (PWM) techniques. The system was tested using a 30 V squared wave power supply as bridge input voltage. The coil current, the bridge input and output voltages were recorded simultaneously. Using a 10 A setpoint current in the superconducting coil, the whole system (coil + DC-DC converter) can provide a stable output voltage showing uninterruptible power supply (UPS) capabilities over 1 s. © 2006 IOP Publishing Ltd.

Engineering hierarchical nanostructures by elastocapillary self-assembly

Surfaces coated with nanoscale filaments such as silicon nanowires and carbon nanotubes are potentially compelling for high-performance battery and capacitor electrodes, photovoltaics, electrical interconnects, substrates for engineered cell growth, dry adhesives, and other smart materials. However, many of these applications require a wet environment or involve wet processing during their synthesis. The capillary forces introduced by these wet environments can lead to undesirable aggregation of nanoscale filaments, but control of capillary forces can enable manipulation of the filaments into discrete aggregates and novel hierarchical structures. Recent studies suggest that the elastocapillary self-assembly of nanofilaments can be a versatile and scalable means to build complex and robust surface architectures. To enable a wider understanding and use of elastocapillary self-assembly as a fabrication technology, we give an overview of the underlying fundamentals and classify typical implementations and surface designs for nanowires, nanotubes, and nanopillars made from a wide variety of materials. Finally, we discuss exemplary applications and future opportunities to realize new engineered surfaces by the elastocapillary self-assembly of nanofilaments. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.