Studies on chemo- and diastereo-selectivity of the Diels-Alder reactions of sulfinyltoluquinones with cyclopentadiene

Sulfinyltoluquinones (2a-2c) were submitted to thermal or catalyzed [4+2] cycloaddition reactions with cyclopentadiene. For p-tolylsulfinyltoluquinones (2b) and (2c), almost complete C2-C3-chemo- and unlike-diastereoselectivity was achieved by catalysis with ZnBr(2), yielding adducts 6. Under thermal conditions, Diels-Alder reaction took place at the C5-C6 double bonds of quinones 2a-2c, generating mixtures of diastereoisomeric like- and unlike-adducts 4.

Histological evaluation of chitosan-based biomaterials used for the correction of critical size defects in rat`s calvaria

Chitosan, a biopolymer obtained from chitin, and its derivates, such as chitosan hydrochloride, has been reported as wound healing accelerators and as possible bone substitutes for tissue engineering, and therefore these Substances could be relevant in dentistry and periodontology. The purpose of this investigation was to make a histological evaluation of chitosan and chitosan hydrochloride biomaterials (gels) used in the correction of critical size bone defects made in rat`s calvaria. Bone defects of 8 mm in diameter were surgically created in the calviria of 50 Holtzman (Rattus norvegicus) rats and filled with blood clot (control), low molecular weight chitosan, high molecular weight chitosan, low molecular weight chitosan hydrochloride, and high molecular weight chitosan hydrochloride, numbering 10 animals, divided into two experimental periods (15 and 60 days), for each biomaterial. The histological evaluation was made based on the morphology of the new-formed tissues in defect`s region, and the results indicated that there was no statistical difference between the groups when the new bone formation in the entire defect`s area were compared (p > 0.05) and, except in the control groups, assorted degrees of inflammation Could be Seen. In Conclusion, chitosan and chitosan hydrochloride biomaterials used in this study were not able to promote new bone formation in critical size defects made in rat`s calvaria. (C) 2009 Wiley Periodicals, Inc. J Biomed Mater Res 93A: 107-114, 2016

Implants of polyanionic collagen matrix in bone defects of ovariectomized rats

In recent years, there has been a great interest in the development of biomaterials that could be used in the repair of bone defects. Collagen matrix (CM) has the advantage that it can be modified chemically to improve its mechanical properties. The aim of the present study was to evaluate the effect of three-dimensional membranes of native or anionic (submitted to alkaline treatment for 48 or 96 h) collagen matrix on the consolidation of osteoporosis bone fractures resulting from the gonadal hormone alterations caused by ovariectomy in rats subjected to hormone replacement therapy. The animals received the implants 4 months after ovariectomy and were sacrificed 8 weeks after implantation of the membranes into 4-mm wide bone defects created in the distal third of the femur with a surgical bur. Macroscopic analysis revealed the absence of pathological alterations in the implanted areas, suggesting that the material was biocompatible. Microscopic analysis showed a lower amount of bone ingrowth in the areas receiving the native membrane compared to the bone defects filled with the anionic membranes. In ovariectomized animals receiving anionic membranes, a delay in bone regeneration was observed mainly in animals not subjected to hormone replacement therapy. We conclude that anionic membranes treated with alkaline solution for 48 and 96 h presented better results in terms of bone ingrowth.

TR-2015001: A Survey and Critique of Facial Expression Synthesis in Sign Language Animation

Sign language animations can lead to better accessibility of information and services for people who are deaf and have low literacy skills in spoken/written languages. Due to the distinct word-order, syntax, and lexicon of the sign language from the spoken/written language, many deaf people find it difficult to comprehend the text on a computer screen or captions on a television. Animated characters performing sign language in a comprehensible way could make this information accessible. Facial expressions and other non-manual components play an important role in the naturalness and understandability of these animations. Their coordination to the manual signs is crucial for the interpretation of the signed message. Software to advance the support of facial expressions in generation of sign language animation could make this technology more acceptable for deaf people. In this survey, we discuss the challenges in facial expression synthesis and we compare and critique the state of the art projects on generating facial expressions in sign language animations. Beginning with an overview of facial expressions linguistics, sign language animation technologies, and some background on animating facial expressions, a discussion of the search strategy and criteria used to select the five projects that are the primary focus of this survey follows. This survey continues on to introduce the work from the five projects under consideration. Their contributions are compared in terms of support for specific sign language, categories of facial expressions investigated, focus range in the animation generation, use of annotated corpora, input data or hypothesis for their approach, and other factors. Strengths and drawbacks of individual projects are identified in the perspectives above. This survey concludes with our current research focus in this area and future prospects.

Face Detection and Facial Feature Localization for multi-pose faces and complex backgroundimages

The objective of this thesis work, is to propose an algorithm to detect the faces in a digital image with complex background. A lot of work has already been done in the area of face detection, but drawback of some face detection algorithms is the lack of ability to detect faces with closed eyes and open mouth. Thus facial features form an important basis for detection. The current thesis work focuses on detection of faces based on facial objects. The procedure is composed of three different phases: segmentation phase, filtering phase and localization phase. In segmentation phase, the algorithm utilizes color segmentation to isolate human skin color based on its chrominance properties. In filtering phase, Minkowski addition based object removal (Morphological operations) has been used to remove the non-skin regions. In the last phase, Image Processing and Computer Vision methods have been used to find the existence of facial components in the skin regions.This method is effective on detecting a face region with closed eyes, open mouth and a half profile face. The experiment’s results demonstrated that the detection accuracy is around 85.4% and the detection speed is faster when compared to neural network method and other techniques.

Behaviour of Surface Defects in Wire Rod Rolling

Defects are often present in rolled products, such as wire rod. The markets demand for wire rod without any defects has increased. In the final wire rod products, defects originating from the steel making, casting, pre-rolling of billets and during the wire rod rolling can appear. In this work, artificial V-shaped longitudinal surface cracks has been analysed experimentally and by means of FEM. The results indicate that the experiments and FEM calculations show the same tendency except in two cases, where instability due to a fairly “round” false round bars disturbed the experiment. FE studies in combination with practical experiments are necessary in order to understand the behaviour of the material flows in the groove and to explain whether the crack will open up as a V-shape or if it will be closed as an I-shape.

Evolution of artificial defects during shape rolling

Very often defects are present in rolled products. For wire rods, defects are very deleterious since the wire rods are generally used directly in various applications. For this reason, the market nowadays requires wire rods to be completely defect-free. Any wire with defects must be rejected as scrap which is very costly for the production mill. Thus, it is very important to study the formation and evolution of defects during wire rod rolling in order to better understand and minimize the problem, at the same time improving quality of the wire rods and reducing production costs. The present work is focused on the evolution of artificial defects during rolling. Longitudinal surface defects are studied during shape rolling of an AISI M2 high speed steel and a longitudinal central inner defect is studied in an AISI 304L austenitic stainless steel during ultra-high-speed wire rod rolling. Experimental studies are carried out by rolling short rods prepared with arteficial defects. The evolution of the defects is characterised and compared to numerical analyses. The comparison shows that surface defects generally reduce quicker in the experiments than predicted by the simulations whereas a good agreement is generally obtained for the central defect.

Studies of Design and Assembly Defects on Integrated and Modular Architectures

It is known that despite companies’ efforts to improve the quality of their products, design and assembly defects results in large repair costs both in terms of repair and providing feedback to the origin of the defect. The purpose of this paper is to study these types of defects and the defect rates in design and assembly. The paper presents a web based questionnaire answered by 29 companies. The result shows that the defect rate (defects per product) spanned from 0.01 to 10. Also, design and assembly defects covered 46%, 23% respectively, of all occurred defects. A case study is also presented, performed at a company who recently implemented a modular architecture. In this company, defects from 5 700 integrated product architectures are compared with defects from 431 modular architectures. The average defect rate increased by 21.5% – from 0.65 to 0.79 – when a more modular architecture has been implemented. Furthermore, the study showed that the assembly defects have decreased while the design defects increased. The results presented in this paper will also support the development of the MPV (Module Property Verification) method which is briefly described.

The facial affective scale as a predictor for pain unpleasantness when children undergo immunizations.

Needle fear is a common problem in children undergoing immunization. To ensure that the individual child's needs are met during a painful procedure it would be beneficial to be able to predict whether there is a need for extra support. The self-reporting instrument facial affective scale (FAS) could have potential for this purpose. The aim of this study was to evaluate whether the FAS can predict pain unpleasantness in girls undergoing immunization. Girls, aged 11-12 years, reported their expected pain unpleasantness on the FAS at least two weeks before and then experienced pain unpleasantness immediately before each vaccination. The experienced pain unpleasantness during the vaccination was also reported immediately after each immunization. The level of anxiety was similarly assessed during each vaccination and supplemented with stress measures in relation to the procedure in order to assess and evaluate concurrent validity. The results show that the FAS is valid to predict pain unpleasantness in 11-12-year-old girls who undergo immunizations and that it has the potential to be a feasible instrument to identify children who are in need of extra support to cope with immunization. In conclusion, the FAS measurement can facilitate caring interventions.

The Facial Affective Scale (FAS) as a predictor for pain unpleasantness when children undergo immunizations

Needle fear is a common problem in children undergoing immunization. To ensure that the individual child’s needs are met during a painful procedure it would be beneficial to be able to predict whether there is a need for extra support. The self-reporting instrument facial affective scale (FAS) could have potential for this purpose. The aim of this study was to evaluate whether the FAS can predict pain unpleasantness in girls undergoing immunization. Girls, aged 11-12 years, reported their expected pain unpleasantness on the FAS at least two weeks before and then experienced pain unpleasantness immediately before each vaccination. The experienced pain unpleasantness during the vaccination was also reported immediately after each immunization. The level of anxiety was similarly assessed during each vaccination and supplemented with stress measures in relation to the procedure in order to assess and evaluate concurrent validity. The results show that the FAS is valid to predict pain unpleasantness in 11-12-year-old girls who undergo immunizations and that it has the potential to be a feasible instrument to identify children who are in need of extra support to cope with immunization. In conclusion, the FAS measurement can facilitate caring interventions.

The Influence of Gender and Facial Appearance on Voting Practices

Women’s faces tend to naturally retain more neonate features than men. These features, such as a greater eye height, a smaller nose area, and a wider smile, would cause women to have more immature faces than males. Interestingly, women who have these facial features are often perceived as more attractive than women with mature facial features. These findings imply that women would be judged less competent than men, and that immature-faced women would be perceived as less competent and more attractive than mature-faced females. Given the direction of political leadership in our country, this has interesting implications for females that are vying for leadership positions. Thus, our study examined the effects of both candidate gender and facial features on voting likelihood, and perceptions of attractiveness and competence, by pairing pictures with neutral party platforms.

Description of a new species of skate of the genus Malacoraja Stehmann, 1970: the first species from the southwestern Atlantic Ocean, with notes on generic monophyly and composition (Chondrichthyes: Rajidae)

O primeiro registro para o Atlântico Sul ocidental de uma espécie do gênero Malacoraja Stehmann, 1970 é feita com base na descrição de Malacoraja obscura, espécie nova, proveniente do talude continental do Sudeste brasileiro dos estados do Espírito Santo e Rio de Janeiro em profundidades de 808-1105 m. A espécie nova é conhecida através de cinco exemplares e é distinta de seus congêneres pela sua coloração dorsal composta por numerosas manchas esbranquiçadas e pequenas na região do disco e nadadeiras pélvicas, por apresentar uma fileira irregular de espinhos ao longo da superfície dorsal mediana da cauda a qual persiste em espécimes maiores (desde a base da cauda até dois-terços do seu comprimento numa fêmea de 680 mm de comprimento total, CT) e uma região pequena desprovida de dentículos na base ventral da cauda (estendendo somente até a margem distal da nadadeira pélvica). Outros caracteres diagnósticos em combinação incluem a ausência de espinhos escapulares em indivíduos maiores, número elevado de fileiras dentárias (64/62 fileiras num macho subadulto de 505 mm de CT e 76/74 numa fêmea de 680 mm de CT) e de vértebras (27-28 Vtr, 68-75 Vprd), coloração ventral do disco uniformemente castanha escura, duas fenestras pós-ventrais na cintura escapular, fenestra pós-ventral posterior grande, forame magno circular e dois forames para a carótida interna na placa basal ventral do neurocrânio. Machos adultos não são conhecidos, porém uma descrição anatômica de M. obscura, sp. nov., é fornecida. Comparações são realizadas com todo o material conhecido de M. kreffti, com a literatura sobre M. senta e com material abundante de M. spinacidermis da África do Sul; M. obscura, sp. nov., assemelha-se mais a M. spinacidermis do Atlântico Sul oriental em esqueleto dérmico, coloração e tamanho. Malacoraja é monofilético devido à sua espinulação e apêndices rostrais conspícuos e é aparentemente composta por dois grupos de espécies, um para M. obscura e M. spinacidermis e outro para M. kreffti e M. senta, porém a elucidação das relações filogenéticas entre as espécies necessita de mais informações anatômicas, principalmente das duas últimas espécies.

Long-term facial artery catheter implantation for serial arterial blood sampling and invasive arterial blood pressure measurement in horses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eficácia da imunoterapia no tratamento de pitiose facial em equino

Background: Pythiosis in horses is a proliferative and ulcerative disease that primarily affects the skin and subcutaneous tissue of limbs, thoracic-abdominal region and head. This disease sometimes can also affect limb bones or cause tumoral masses in abdomen. Usually, the cutaneous cases are confused with habronemiasis. The disease is more common in marshy areas, places with formation of slow drainage ponds and aquatic vegetation under high temperatures. The aim of this study was to describe the development of facial lesions in a horse caused by pythiosis in Cuiaba, Mato Grosso, and, additionally to discuss relevant issues regarding the diagnosis, clinical course and response to immunotherapy treatment.Case: One five years old mare of unknown breed, created in property located in the Cerrado region, had a wound on its face difficult to be healed and non-responsive to several treatments based on ivermectin and organophosphate administrated by either topical or systemic via. The animal was assisted on the farm of origin by the veterinary team of the Clinical Medicine sector, of the Veterinary Hospital, Universidade Federal de Mato Grosso (HOVET-UFMT). on the occasion of the visit, which occurred 60 days after onset of signs, the animal showed a circular single large lesion, ulcerative with serous discharge on the right part of its face, between the eyes and nostrils. There were some necrotic foci with sinus, from which kunkers were extracted; a condition compatible with pythiosis. The diagnosis was confirmed by histology, ELISA and PCR.Discussion: Assuming pythiosis from data obtained from the survey and profile of the lesion (secretory aspect, emaciation and presence of sinus and kunkers), immunotherapy treatment was immediately applied. The advanced clinical aspects and the fact that early diagnosis and treatment are essentials to satisfactory therapeutic response were also taken into consideration for starting the treatment. The remission of signs was achieved after five subcutaneous applications with 14 days between each application. From the second application, it was observed clinical improvement and after 60 days of treatment there was almost complete remission of signs. The signs for a satisfactory response in the injury site followed the order of decreasing secretory aspect, decreasing borders, decrease the itching and bringing the edges together with the formation of a thin layer of crust on the surface. Pythiosis cases with lesions on the face and lower abdomen are commonly confused with habronemiasis by macroscopic and widespread similarity between technicians and attendants, and essential support to the diagnosis through laboratory tests, which in turn are still underutilized. In this case, the authors demonstrated the therapeutic efficacy of immunotherapy as an advantage, considering the possibility of applying it in cases of lesions in areas of difficult surgical access, treatment conditions in the field, with low cost and ease of application. Further studies approaching this alternative therapy are necessary, since side effects have been observed in some cases.

Assessment of field fertility and several in vitro sperm characteristics following the use of different Angus sires in a timed-AI program with suckled Nelore cows

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)