A nerve growth factor from the venom of Chinese cobra (Naja naja atra) and its effects on male reproductive system in rats

A nerve growth factor (NGF) was isolated from the venom of Chinese cobra (Naja naja ntr a) by ion exchange chromatography, gel filtration and fast protein liquid chromatography (FPLC). The N-terminal sequence of 22 amino acid residues was identical with other NGFs previously purified from the venom of the same genus. The NGF monomer molecular weight was estimated to be 13 500 by reducing SDS-PAGE and the isoelectric point was determined to be 7.2 by isoelectric focusing electrophoresis. NGF improved the epididymal sperm motility of male rats and increased the pregnancy rate and fetus number of mated female rats. The serum levels of luteinizing hormone (LH) and follicle stimulating hormone (FSH) of male rats administrated NGF + gossypol was lower than that of male rats administrated gossypol. Histological sections of testes and epididymides showed that NGF reduced the destructive effects of gossypol on rat testes. (C) 1999 Elsevier Science Inc. All rights reserved.

Purification and characterization of jerdofibrase, a serine protease from the venom of Trimeresurus jerdonii snake

A fibrin(ogen)olytic serine protease from Trimeresurus jerdonii venom was identified and purified to SDS-polyacrylamide gel electrophoresis homogeneity. It is a single chain polypeptide with a molecular weight of 32 kDa under reduced condition and 28 kDa

A new protein structure of P-II class snake venom metalloproteinases: it comprises metalloproteinase and disintegrin domains

A new metalloproteinase-disintegrin, named Jerdonitin, was purified from Trimeresurus jerdonii venom with a molecular weight of 36 kDa on SDS-PAGE. It dose-dependently inhibited ADP-induced human platelet aggregation with IC50 of 120 nM. cDNA cloning and sequencing revealed that Jerdonitin belonged to the class II of snake venom metalloproteinases (SVMPs) (P-II class). Different from other P-II class SVMPs, metalloproteinase and disintegrin domains of its natural protein were not separated, confirmed by internal peptide sequencing. Compared to other P-II class SVMPs, Jerdonitin has two additional cysteines (Cys219 and Cys238) located in the spacer domain and disintegrin domain, respectively. They probably form a disulfide bond and therefore the metalloproteinase and disintegrin domains cannot be separated by posttranslationally processing. In summary, comparison of the amino acid sequences of Jerdonitin with those of other P-II class SVMPs by sequence alignment and phylogenetic analysis, in conjunction with natural protein structure data, suggested that it was a new type of P-II class SVMPs. (C) 2003 Elsevier Inc. All rights reserved.

Jerdonase, a novel serine protease with kinin-releasing and fibrinogenolytic activity from Trimeresurus jerdonii venom

A novel kinin-releasing and fibrin (ogen)olytic enzyme termed jerdonase was purified to homogeneity from the venom of Trimeresurus jerdonii by DEAE Sephadex A-50 anion exchange, Sephadex G-100 (superfine) gel filtration and reverse-phase high performance liquid chromatography (RP-HPLC). Jerdonase migrated as a single band with an approximate molecular weight of 55 kD under the reduced conditions and 53 kD under the non-reduced conditions. The enzyme was a glycoprotein containing 35.8% neutral carbohydrate. The N-terminal amino acid sequence of jerdonase was determined to be IIGGDECNINEHPFLVALYDA, which showed high sequence identity to other snake venom serine proteases. Jerdonase catalyzed the hydrolysis of BAEE, S-2238 and S-2302, which was inhibited by phenymethylsulfonyl fluoride (PMSF), but not affected by ethylenediaminetetraacetic acid (EDTA). Jerdonase preferentially cleaved the Aalpha-chain of human fibrinogen with lower activity towards Bbeta-chain. Moreover, the enzyme hydrolyzed bovine low-molecular-mass kininogen and releasing bradykinin. In conclusion, all results indicated that jerdonase was a multifunctional venom serine protease.

Purification, characterization and biological activity of an L-amino acid oxidase from Trimeresurus mucrosquamatus venom

An L-amino acid oxidase (TM-LAO) from the venom of Hunan Trimeresurus mucrosquamatus was purified to homogenicity by three steps including DEAE Sephadex A-50 ion-exchange chromatography, Sephadex G-75 gel filtration and Resourse Q ion-exchange chromatography. TM-LAO is composed of two identical subunits with a molecular weight of 55 kD by SDS-polyacrylamide gel electrophoresis. The molecular weight was different with that of LAO purified from the same species distributed in Taiwan that was 70 kD. The 24 N-terminal ammo acid sequence of TM-LAO is ADNKNPLEECFRETNYEEFLEIAR, which shares high similarity with other Viperid snake venom LAOs and has moderate similarity with Elapid snake venom LAOs. Further studies found that TM-LAO inhibited the growth of E. colt, S. aurues and B. dysenteriae. TM-LAO also showed cytotoxicity and platelet aggregation activity. All the biological activities were eliminated by catalase, a H2O2 scavenger. It shows that these biological effects are possibly due to the formation of H2O2 produced by TM-LAO.

Chemical changes in skin mucin as an index of early stages of spoilage in fish

Results of a preliminary investigation on the overall chemical nature of fish skin mucin in lung fish, Clarias batrachus, with special reference to water soluble low molecular weight compounds, are presented. Changes observed during room temperature spoilage have been studied with a view to present a new approach towards the assessment of freshness in fish inspection. pH of the mucin was distinctly alkaline (8.2) and remained unchanged during spoilage. Much of the nitrogen was found to be present in the glycoprotein fraction. Free amino acids and purine bases were present in appreciable quantities in the aqueous extracts which registered a significant increase after 10 hrs. Post-mortem increase in total solids was accompanied by a slight rise in protein nitrogen which may indicate tissue breakdown. Increase in TVN was also observed to occur earlier in the outside mucin as compared to the inside muscle. Presence of free sugars or sialic acid could not be confirmed nor was there any indication of cholesterol and lipoid material as stated in earlier literature.

Different protein tyrosine phosphatase superfamilies resulting from different gene reading frames

Protein tyrosine phosphatases (PTPs) are comprised of two superfamilies, the phosphatase I superfamily containing a single low-molecular-weight PTP (lmwPTP) family and the phosphatase II superfamily including both the higher-molecular-weight PTP (hmwPTP) and the dual-specificity phosphatase (DSP) families. The phosphatase I and H superfamilies are often considered to be the result of convergent evolution. The PTP sequence and structure analyses indicate that lmwPTPs, hmwPTPs, and DSPs share similar structures, functions, and a common signature motif, although they have low sequence identities and a different order of active sites in sequence or a circular permutation. The results of this work suggest that lmwPTPs and hmwPTPs/DSPs are remotely related in evolution. The earliest ancestral gene of PTPs could be from a short fragment containing about 90similar to120 nucleotides or 30similar to40 residues; however, a probable full PTP ancestral gene contained one transcript unit with two lmwPTP genes. All three PTP families may have resulted from a common ancestral gene by a series of duplications, fusions, and circular permutations. The circular permutation in PTPs is caused by a reading frame difference, which is similar to that in DNA methyltransferases. Nevertheless, the evolutionary mechanism of circular permutation in PTP genes seems to be more complicated than that in DNA methyltransferase genes. Both mechanisms in PTPs and DNA methyltransferases can be used to explain how some protein families and superfamilies came to be formed by circular permutations during molecular evolution.

Venomics and biological analysis of Scatophagus argus argus (Spotted scat) venom isolated in Persian Gulf, extraction and purification of hemolytic protein

Green scat namely as Scatophagus argus argus is a venomous aquarium fish belonging to Scatophagidae family. It can induce painful wounds in injured hand with partial paralysis to whom that touch the spines. Dorsal and ventral rough spines contain cells that produce venom with toxic activities. According to unpublished data collected from local hospitals in southern coastal region of Iran, S. argus is reported as a venomous fish. Envenomation induces clinical symptoms such as local pain, partial paralysis, erythema and itching. In the present study green scat (spotted scat) was collected from Persian Gulf coastal waters. SDS-PAGE indicated 12 distinct bands in the venom ranged between 10-250 KDa. The crude venom had hemolytic activity on human erythrocytes (1%) with an LC100 (Lytic Concentration) of about 1.7 μg. The crude venom can release 813 μg proteins from 0.5% casein. Phospholipase C activity was recorded at 3.125 μg of total venom. Our findings showed that the edematic activity remained over 48 h after injection. The purification of the venom was done by HPLC and 30 peaks were obtained within 80 min but only one peak in 68 min retention time showed hemolytic activity at 90% acetonitril was isolated. The area percentage of the hemolytic protein showed that this hemolytic protein consist of 32 percent of total proteins and its molecular weight was 72 KDa in SDS_PAGE. The results demonstrated that crude venom extracted from Iranian coastal border has different toxic and enzymatic activities.

Liver cytochrome oxidase P4501A1 purification of Acipenser persicus and designing ELISA for measuring

Moon oxygenases related to cytochrome P450s are the molecular Biomarkers which have important role in Biotransformation of endogenous and exogenous compounds and catalazyin of many biological reactions. One of the important isoenzyme is cytochrome P4501A. This isoenzyme involved in metabolism of environment pollutnts such as PAHs. Because of its inducibility, it has a key tool for impact assesment of contaminants in aquatic environment. In this study, at first, that fractions containing Acipenser persicus and Huso huso isoenzyme were purified, and after that Antibodies against them were prepared. For isolation of isoenzyme fraction, Microsomes were prepared from fish liver using differential centrifugation at high speeds. microsomes were solubiized by cholat sodium and Emulgen. Extraction of this isoenzyme was done with the combinatuion of ionexchange chromatography and gelfiltration or chromatofocusing chromatography. Ion exchange chromatography and gel filtration were applied in DEAE sepharose fast flow and sephacryl S200 respectively and chromatofocusing was done at poly buffer 74 and 94 exchanger. The results of SDS-PAGE Showed that the molecular weight of isoenzyme was about 58±1 KDa. Furthermore the inmunoblotting results confirmed this subject. Isoenzyme activigy based on EROD (Ethoxyresorofin o-deethylase) reaction showed about 20-26 fold increase in enzyme activity of treated fish than control fish. The results of Elisa, Using monoclonal anti cod P4501A demonstrated the inducibility and highly elevated of its activity in treated sample more than the control fish. Mean while, the fish sample were showed the strong reaction to polyclonal antibody against beluga P4501A1 prepared in our Lab compared to monoclonal anti body.

Jetting behaviour of polymer solutions in drop-on-demand inkjet printing

The jetting of dilute polymer solutions in drop-on-demand printing is investigated. A quantitative model is presented which predicts three different regimes of behaviour depending upon the jet Weissenberg number Wi and extensibility of the polymer molecules. In regime I (Wi < ½) the polymer chains are relaxed and the fluid behaves in a Newtonian manner. In regime II (½ < Wi < L) where L is the extensibility of the polymer chain the fluid is viscoelastic, but the polymer do not reach their extensibility limit. In regime III (Wi > L) the chains remain fully extended in the thinning ligament. The maximum polymer concentration at which a jet of a certain speed can be formed scales with molecular weight to the power of (1-3ν), (1-6ν) and -2ν in the three regimes respectively, where ν is the solvent quality coefficient. Experimental data obtained with solutions of mono-disperse polystyrene in diethyl phthalate with molecular weights between 24 - 488 kDa, previous numerical simulations of this system, and previously published data for this and another linear polymer in a variety of “good” solvents, all show good agreement with the scaling predictions of the model.

Regimes of Polymer Behaviour in Drop-on-Demand Ink-Jetting

Three regimes of fast DoD jetting behaviour for solutions of mono-disperse linear polymers have been linked to the underlying polymer molecular chains and their fully extended length L in good solvents. This allows scaling laws in molecular weight to be predicted and applied to experimental jetting results from different DoD print heads. The higher extensional flows encountered in high speed jetting in viscous solvents can fully stretch linear molecules outside the nozzle, permitting jetting of higher polymer content than for purely elastic behaviour. These results are significant for DoD printing at raised jet speeds and will apply to any DoD print head jetting linear polymer solutions.

Turbulence length scale measurements in a motored internal combustion engine

A novel technique, using a 'flying' Hot Wire Anemometer is described; it is shown how the turbulent structure in a motored engine, using a high molecular weight gas as the working fluid, may be investigated with relative simplicity and very little engine modification. Initial results are presented for integral and micro length scales, which are within the range expected based on previous work. Copyright © 1987 Society of Automotive Engineers, Inc.

Coagulation removal of melanoidins from biologically treated molasses wastewater using ferric chloride

The pigments (melanoidins) in molasses wastewater are refractory to conventional biological treatment. Ferric chloride was used as coagulant to remove color and chemical oxygen demand (COD) from molasses effluent. Using jar test procedure, main operating conditions such as pH and coagulant dosage were investigated. Under the optimum conditions, up to 86% and 96% of COD and color removal efficiencies were achieved. Residual turbidity in supernatant was less than 5 NTU and Fe3+ concentration was negligible because of effective destabilization and subsequent sedimentation. The results of high performance size exclusion chromatography (HPSEC) show that low molecular weight (MW) fraction of melanoidins is more reactive than high MW fraction and increase in the concentration of the lowest MW organic group is related to the capacity of charge neutralization. Aggregate size measurement reveals the size effect on the settleability of flocs formed, with larger flocs settling more rapidly. Charge neutralization and co-precipitation are proposed as predominant coagulation mechanism under the optimum conditions. (C) 2009 Elsevier B.V. All rights reserved.

Polishing Treatment of Molasses Wastewater with Iron Salts: the Role of Counter-ions

The effect of counter-ions on the coagulation of biologically treated molasses wastewater using iron-based coagulants was investigated. Parameters such as removals of chemical oxygen demand (COD) and color, and residual turbidity, were measured to evaluate coagulation performance. Experimental results showed that ferric chloride and ferric nitrate were more effective than ferric sulfate at optimal dosages, achieving 89 to 90% and 98 to 99% of COD and color removals, respectively, with residual turbidity of less than 5 NTU. High-performance size exclusion chromatography (HPSEC) results revealed differences in the removal of the molecular weight fraction of organic compounds using iron salts. Scanning electron microscopy (SEM) showed randomly formed coagulated flocs characterized with irregular, sheet-like shapes. Nitrate and chloride counter-ions had similar effects on coagulation performance compared to sulfate. Both FeCl3 and Fe(NO3)(3) yielded better results than Fe(SO4)(2) under underdosed and optimum dosage conditions. Coagulation efficiency was less adversely affected in the overdosed regions, however, if sulfate rather than chloride or nitrate was present. Water Environ. Res., 81, 2293 (2009).

Variables affecting melanoidins removal from molasses wastewater by coagulation/flocculation

Coagulation/flocculation process was applied in the polishing treatment of molasses wastewater on a bench-scale. Important operating variables, including coagulant type and dosage, solution pH, rapid mixing conditions as well as the type and dosage of polyeletrolytes were investigated based on the maximum removal efficiencies of chemical oxygen demand (COD) and color, residual turbidity and settling characteristics of flocs. HPSEC was utilized to evaluate the removal of molecular weight fractions of melanoidins-dominated organic compounds. Experimental results indicate that ferric chloride was the most effective among the conventional coagulants, achieving 89% COD and 98% color eliminations; while aluminum sulfate was the least effective, giving COD and color reductions of 66% and 86%, respectively. In addition to metal cations, counter-ions exert significant influence on the coagulation performance since Cl--based metal salts attained better removal efficiency than SO42--based ones at the optimal coagulant dosages. Coagulation of molasses effluent is a highly pH-dependent process, with better removal efficiency achieved at lower pH levels. Rapid mixing intensity, rather than rapid mixing time, has relatively strong influence on the settling characteristics of flocs formed. Lowering mixing intensity resulted in increasing settling rate but the accumulation of floating flocs. When used as coagulant aids, synthetic polyelectrolytes showed little effects on the improvement in organic removal. On the other hand, cationic polyacrylamide was observed to substantially enhance the settleability of flocs as compared to anionic polyacrylamide. The effects of rapid mixing conditions and polymer flocculants on the coagulation performance were discussed. (C) 2009 Elsevier B.V. All rights reserved.