The acid-base impact of free water removal from, and addition to, plasma

Water, compared with plasma at a pH of 7.4, is a weak acid. The addition of free water to a patient should have an acidifying effect (dilutional acidosis) and the removal of it, an alkalinizing effect (concentrational alkalosis). The specific effects of free water loss or gain in a relatively complex fluid such as plasma has, to the authors' knowledge, not been reported. This information would be useful in the interpretation of the effect of changes in free water in patients. Plasma samples from goats were either evaporated in a tonometer to 80% of baseline volume or hydrated by the addition of distilled water to 120% of baseline volume. The pH and partial pressure of carbon dioxide, sodium, potassium, ionized calcium, chloride, lactate, phosphorous, albumin, and total protein concentrations were measured. Actual base excess (ABE), standard bicarbonate, anion gap, strong ion difference, strong ion gap, unmeasured anions, and the effects of sodium, chloride, phosphate, and albumin changes on ABE were calculated. Most parameters changed 20% in proportion to the magnitude of dehydration or hydration. Bicarbonate concentration, however, increased only 11% in the evaporation trial and decreased only -2% in the dehydration trial. The evaporation trial was associated with a mild, but significant, metabolic alkalotic effect (ABE increased 3.2 mM/L), whereas the hydration trial was associated with a slight, insignificant metabolic acidotic effect (ABE decreased only 0.6 mM/L). The calculated free water ABE effect (change in sodium concentration) was offset by opposite changes in calculated chloride, lactate, phosphate, and albumin ABE effects.

The effect of polymerization cycles on porosity of microwave-processed denture base resin

Statement of problem. Although most of the physical properties of denture base resin polymerized by microwave energy have been shown to be similar to resins polymerized by the conventional heat polymerization method, the presence of porosity is a problem.Purpose. This study evaluated the effect of different microwave polymerization cycles on the porosity of a denture base resin designed for microwave polymerization.Material and methods. Thirty-two rectangular resin specimens (65 X 40 X 5 mm) were divided into 3 experimental groups (A, B, and C; Onda-Cryl, microwave-polymerized resin) and I control group (T; Classico, heat-polymerized resin), according to the following polymerization cycles: (A) 500 W for 3 minutes, (B) 90 W for 13 minutes + 500 W for 90 seconds, (C) 320 W for 3 minutes + 0 W for 4 minutes + 720 W for 3 minutes, and (T) 74degreesC for 9 hours. Porosity was calculated by measurement of the specimen volume before and after its immersion in water. Data were analyzed using 1-way analysis of variance (alpha = .05).Results. The mean values and SDs of the percent mean porosity were: A = 1.05% +/- 0.28%, B = 0.91% +/- 0.15%, C = 0.88% +/- 0.23%, T = 0.93% +/- 0.23%. No significant differences were found in mean porosity among the groups evaluated.Conclusion. Within the limitations of this study, a denture base resin specifically designed for microwave Polymerization tested was not affected by different polymerization cycles. Porosity was similar to the conventional heat-polymerized denture base resin tested.

Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures

Statement of problem. Titanium has physical and mechanical properties, which have led to its increased use in dental prostheses despite casting difficulties due to high melting point and formation of oxide layers which affect the metal-ceramic bond strength.Purpose. This in vitro study evaluated the shear bond strength of the interface of 2 dental porcelains and pure titanium injected into a mold at 3 different temperatures.Material and methods. Using commercially pure (cp) titanium bars (Titanium, Grade I) melted at 1668degreesC and cast at mold temperatures of 430degreesC, 700degreesC or 900degreesC, 60 specimens were machined to 4 x 4 mm, with a base of 5 x 1 mm. The 4-mm surfaces were airborne-particle abraded with 100 mum aluminum oxide before applying and firing the bonding agent and evaluating the 2 porcelains (Triceram/Triline ti and Vita Titankeramik). Ten specimens were prepared for each temperature and porcelain combination Shear bond testing was performed in a universal testing machine, with a 500-kg load cell and crosshead speed of 0.5 mm/min. The specimens were loaded until failure. The interfaces of representative fractured specimens of each temperature were examined with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Data for shear bond strength (MPa) were statistically analyzed by 2-way ANOVA and the Tukey test (alpha = .05).Results. The results showed significant differences for the metal/porcelain interaction effect (P = .0464). There were no significant differences for the 2 porcelains (P = .4250). The Tukey test showed a significant difference between the pair cp Ti 430degreesC Triceram and cp Ti 900degreesC Triceram, with respective mean values and SDs of 59.74 +/- 11.62 and 34.03 +/- 10.35 MPa.Conclusion. Triceram porcelain showed a bond strength decrease with an increase in the mold temperature for casting titanium. The highest bond strength for Vita porcelain and the best metal-ceramic interface observed with the SEM were found with the mold temperature of 700degreesC.

Comparative study of the Frankel (FR-2) and bionator appliances in the treatment of Class II malocclusion

The purpose of this investigation was to compare the dentoalveolar and skeletal cephalometric changes produced by the Frankel (FR-2) and bionator appliances in persons with Class 11 malocclusion. Lateral cephalograms were available for 66 patients of both sexes, who were divided into 3 groups of 22. The control group included untreated Class 11 children, with an initial mean age of 8 years 7 months; they were followed without treatment for 13 months. The FR-2 appliance group had an initial mean age of 9 years; those children were treated for a mean period of 17 months. The bionator group initially had a mean age of 10 years 8 months; on average, they were treated for 16 months. The results demonstrated no significant changes in maxillary growth during the evaluation period. Both appliances showed statistically significant increases in mandibular growth and mandibular protrusion, with greater increases in patients treated in the bionator group. Both experimental groups showed an improvement in the maxillomandibular relationship. There were no significant changes in growth direction, while the bionator group had a greater increase in posterior facial height. Both appliances produced similar labial tipping and protrusion of the lower incisors, lingual inclination, retrusion of the upper incisors, and a significant increase in mandibular posterior dentoalveolar height. The major treatment effects of bionator and FR-2 appliances were dentoalveolar, with a smaller, but significant, skeletal effect.

Short-term movement and retreat sites of Leptodactylus labyrinthicus (Anura : Leptodactylidae) during the breeding season: A spool-and-line tracking study

Capture/recapture studies significantly increase our knowledge of the natural history of anuran amphibians. Many different methods have been employed in these studies, but a number of new techniques still require experimental validation. During two reproductive seasons in a Cerrado remnant in southeastern Brazil, we investigated the movement patterns and habitat use of the pepper frog, Leptodactylus labyrinthicus, using a spool-and-line device. This low-cost device did not appear to interfere with the activities of the frogs and allowed for constant monitoring, showing precise routes of movement and great predictability of relocations. Both sexes were active at night. During the day, males and females made use of retreat sites under vegetation or in burrows constructed by small- and medium-sized mammals. Males and females did not use standardized routes; there were no significant differences between their movements, and movements were not correlated with body size or environmental conditions. Individuals are able to move further than 100 m per day, a characteristic that may enable this species to colonize or recolonize open areas.

Estimation of growth fraction in fine needle aspirates from non-Hodgkin's lymphoma using anti-proliferating cell nuclear antigen - Correlation with the Kiel classification

OBJECTIVE: This study was undertaken to assess whether fine needle aspirates from non-Hodgkins lymphoma (NHL) could be used for growth fraction analysis with proliferating cell nuclear antigen (PCNA) staining and if there was a relationship between the growth fraction and cytomorphologic classification according to the Kiel classification.STUDY DESIGN: the study group consisted of 40 patients with NHL diagnosed by fine needle aspiration (FNA) cytology. The cytologic classification of the lymphomas was made by two cytopathologists on May-Grunwald-Giemsa-stained slides using the Kiel classification. There were 27 cases of low and 13 of high grade lymphoma. The estimation of the growth fraction was made by PCNA immunoreactivity. The PCNA index was quantitated in smears by counting an average of 1,000 cells, and the count teas correlated with the cytomorphologic classification.RESULTS: There was It strong correlation between the PCNA index and lymphoma grading. High grade lymphomas exhibited a mean PCNA positivity of 74.0%, which was significantly higher (P <.001) than that of low grade lymphomas (17.6%).CONCLUSION: Our study showed that PCNA evalua tion is suitable for smears obtained by FNA on NHL, correlates with increasing grades of lymphoma according to the Kiel classification and may offer a method of monitoring treatment of lymphoma.

Characterizing subpopulations of neoplastic cells in serous effusions - the role of immunocytochemistry

OBJECTIVE: To analyze the role of immunochemistry in serous effusions.STUDY DESIGN: We analyzed cell blocks of 18 pleural and 18 peritoneal effusions diagnosed as malignant (18), benign (14) and suspicious (4). They were immunostained by the avidin-biotin complex method with a panel of four monoclonal antibodies-CEA, Ber-EP4, LeuM1 (CD15) and r53-and for lectins (Ulex europaeus) UEA-1, ConA and ConBr. RESULTS: Seventeen of the 18 cases of adenocarcinoma were positive for CEA (95%), 12 (66.6%)for Bev-EP4, 11 (61 %)for CD15 nild 11 (62 %)for p53. Twelve of the 18 (66.6%) were positive for UEA-1, CEA, Ber-EP4 and CD15. UEA-1 did not react with mesothelial cells. p53 Gave a positive reaction in only one case, reactive mesothelial cells. ConA and ConBr reacted indiscriminately with benign and malignant cells; thus, it was not useful in distinguishing between these cells.CONCLUSION: In this context no antibody used alone is reliable for corroborating a diagnosis, but the selective use of a small panel of three markers (CEA, Ber-EP4 and LeuM1) can be very useful in solving diagnostic difficulties in the cytodiagnosis of serous effusions.

Anatomy of the oral cavity of hylid larvae from the genera Aplastodiscus, Bokermannohyla, and Hypsiboas (Amphibia, anura): Description and systematic implications

Internal larval oral anatomy was used to explore morphological diversity and its contribution to the systematics of the genera Aplastodiscus, Bokerinannohyla, and Hypsiboas, belonging to the tribe Cophomantini. Internal oral morphology was examined for tadpoles of 12 species. All species have a large pair of infralabial papillae on the buccal floor and other papillae on the prelingual region. In Aplastodiscus and Bokerinannohyla, the large infralabial papillae have digitiform secondary projections. The number and arrangement of the buccal floor papillae varies among species, but they are more numerous in Aplastodiscus and Bokerinannohyla. The arrangement of the postnarial papillae is variable, but in Aplastodiscus and Bokerinannohyla, they show a definite, inverted V-shape pattern. The lateral ridge papillae are more complex in larvae of Bokertnannohyla with long digitiform secondary projections. Tadpoles of only Aplastodiscus albofrenatus, Aplastodiscus eugenioi, and Bokerinannohyla luctuosa have papillae on the buccal roof arena and larvae of all species have lateral roof papillae except Hypsiboas albomarginatus and Hypsiboas cinerascens. Larvae of Aplastodiscus, Bokermannohyla, and Hypsiboas presumably share the presence of vacuities anterior to the internal nares; although this character state is clearly synapomorphic within hylids, it is still uncertain whether it is exclusive of these three genera or whether it is present in the other genera of the tribe Cophomantini (Hyloscirtus and Myersiohyla). The inclusion of internal oral anatomy characters, such as the narial vacuities, in systematic studies is certainly valuable because it will provide additional information toward the understanding of phylogenetic relationships.

Effect of microwave sterilization and water storage on the Vickers hardness of acrylic resin denture teeth

Statement of problem. Acrylic resin denture teeth soften upon immersion in water, and the heating generated during microwave sterilization may enhance this process.Purpose. Six brands of acrylic resin denture teeth were investigated with respect to the effect of microwave sterilization and water immersion on Vickers hardness (VHN).Material and Methods. The acrylic resin denture teeth (Dentron [D], Vipi Dent Plus [V], Postaris [P], Biolux [B], Trilux [T], and Artiplus [A]) were embedded in heat-polymerized acrylic resin within polyvinylchloride tubes. For each brand, the occlusal surfaces of 32 identical acrylic resin denture posterior teeth were ground flat with 1500-grit silicon carbide paper and polished on a wet polishing wheel with a slurry of tin oxide. Hardness tests were performed after polishing (control group, C) after polishing followed by 2 cycles of microwave sterilization at 650 W for 6 minutes (MwS group), after polishing followed by 90-day immersion in water (90-day Wim group), and after polishing followed by 90-day storage in water and 2 cycles of microwave sterilization (90-day Wim + MwS group). For each specimen, 8 hardness measurements were made and the mean was calculated. Data were analyzed with a 2-way analysis of variance followed by the Bonferroni procedure to determine any significance between pairs of mean values (alpha=.01).Results: Mircrowave sterilization of specimens significantly decreased (P <.001) the hardness of the acrylic resin denture tooth specimens P (17.8 to 16.6 VHN, V (18.3 to 15.8 VHN), T (17.4 to 15.3 VHN), B (16.8 to 15.7 VHN), and A (17.3 to 15.7 VHN). For all acrylic resin denture teeth, no significant differences in hardness were found between the groups Mws, 90-day Wim, and 90-day Wim + MwS, with the exception of the 90-day Wim + MwS tooth A specimens (14.4 VHN), which demonstrated significant lower mean values (P <.001) than the 90-day Wim (15.8 VHN) and MwS (15.7 VHN) specimens.Conclusions. For specimens immersed in water for 90 days, 2 cycles of microwave sterilization had no effect on the hardness of most of the acrylic resin denture teeth.

Morphometric and histochemical study of the human vocal muscle

The present study was conducted on vocal muscles removed at autopsy Rom adult individuals (10 men and 8 women, aes ranging from 48 to 78 years) with no laryngeal disease. Histologic analysis was performed with hematoxylin and eosin staining, and histochemical analysis was performed by nicotinamide-adenine-dinucleotide tetrazolium reductase, succinate dehydrogenase, and acid and alkaline myofibrillar adenosine triphosphatase reactions. The histochemical reactions showed that the muscle consists of slow-twitch oxidative (SO), fast-twitch glycolytic (FG), and fast-twitch glycolytic oxidative (FOG) fibers distributed in mosaic form. The frequencies of SO, FOG, and FG fibers were 40.50%, 54.75%, and 4.75%, respectively. The higher frequency of SO and FOG oxidative fibers characterizes the muscle as having aerobic metabolism, resistance to fatigue, and fast contraction. The mean minimum diameters were 31.37 mu m for SO fibers and 36.46 mu m for FOG and FG fibers.

Natural History of the Lutz's Frog Cycloramphus lutzorum Heyer, 1983 (Anura: Cycloramphidae) in the Brazilian Atlantic Forest: Description of the Advertisement Call, Tadpole, and Karyotype

We describe the advertisement call, tadpole, karyotype, and additional information on the natural history of Cycloramphus lutzorum from southern Brazil. Sonograms were generated from digitally recorded calls. Tadpoles were collected in the field for description in the lab, and an adult was collected for karyotyping. Data on seasonal activity were gathered monthly from November 2005 to November 2007. All tadpoles (N = 21), juveniles (N = 18), and adults (N = 52) were found exclusively in streams. Reproduction, as identified by calling frogs, occurred from July through November. Frogs call all day long, but mostly at dusk, from rock crevices inside the stream edges near the splash zone. The call is short and loud, with 11 pulsed notes, of 491-641 ms, with a dominant frequency of 0.98-1.39 kHz. We describe the exotrophic and semiterrestrial tadpoles, always found in constantly humid vertical rock walls in the stream. Tadpoles of C. lutzorum are recognized by differences in labial tooth row formula, eye diameter, body shape, position of nares, and development of tail. Like congeneric species, the karyotype of C. lutzorum comprises 26 metacentric and submetacentric chromosomes. Cycloramphus lutzorum is restricted to and adapted for living in fast flowing streams, many of which are threatened by deforestation, pollution, and habitat loss. Therefore, we recommend the status of C. lutzorum be changed from its current "Data Deficient" to "Near Threatened (NT)" in the IUCN species red list.

New Species of Brachycephalus (Anura: Brachycephalidae) from the Atlantic Rain Forest in São Paulo State, Southeastern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphological and Molecular Variation in the Pumpkin Toadlet, Brachycephalus ephippium (Anura: Brachycephalidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Short interspersed repetitive elements (SINEs) from the cichlid fish, Oreochromis niloticus, and their chromosomal localization by fluorescent in situ hybridization

In the present study, we describe the cloning and characterization of a new SINE-like element from O. niloticus (ROn-2) and show the distribution of this SINE and a previously isolated SINE, ROn-1, in the chromosomes of O. niloticus. The ROn-2 element is 359 base pairs (bp) in length, contains short direct terminal repeats, a tRNA-related region similar to tRNA Val and tRNA Arg, a tRNA-unrelated region, and a poly-A tail. Analysis of the chromosomal distribution of ROn-1 and ROn-2 by fluorescent in situ hybridization showed that both SINE sequences are present in all chromosomes of tilapia, and organized in small clusters. The only exception was a large cluster of ROn-1 repeats found in the middle of the long arm of chromosome 1. In view of our data we discuss the hypothesis that the absence of large clusters of SINE sequences and the structural composition of these sequences may explain the absence of base-specific fluorochrome bands in the chromosomes of tilapia.