Modelling of urban sensible heat flux at multiple spatial scales : a demonstration using airborne hyperspectral imagery of Shanghai and a temperature–emissivity separation approach

Urbanization related alterations to the surface energy balance impact urban warming (‘heat islands’), the growth of the boundary layer, and many other biophysical processes. Traditionally, in situ heat flux measures have been used to quantify such processes, but these typically represent only a small local-scale area within the heterogeneous urban environment. For this reason, remote sensing approaches are very attractive for elucidating more spatially representative information. Here we use hyperspectral imagery from a new airborne sensor, the Operative Modular Imaging Spectrometer (OMIS), along with a survey map and meteorological data, to derive the land cover information and surface parameters required to map spatial variations in turbulent sensible heat flux (QH). The results from two spatially-explicit flux retrieval methods which use contrasting approaches and, to a large degree, different input data are compared for a central urban area of Shanghai, China: (1) the Local-scale Urban Meteorological Parameterization Scheme (LUMPS) and (2) an Aerodynamic Resistance Method (ARM). Sensible heat fluxes are determined at the full 6 m spatial resolution of the OMIS sensor, and at lower resolutions via pixel aggregation and spatial averaging. At the 6 m spatial resolution, the sensible heat flux of rooftop dominated pixels exceeds that of roads, water and vegetated areas, with values peaking at ∼ 350 W m− 2, whilst the storage heat flux is greatest for road dominated pixels (peaking at around 420 W m− 2). We investigate the use of both OMIS-derived land surface temperatures made using a Temperature–Emissivity Separation (TES) approach, and land surface temperatures estimated from air temperature measures. Sensible heat flux differences from the two approaches over the entire 2 × 2 km study area are less than 30 W m− 2, suggesting that methods employing either strategy maybe practica1 when operated using low spatial resolution (e.g. 1 km) data. Due to the differing methodologies, direct comparisons between results obtained with the LUMPS and ARM methods are most sensibly made at reduced spatial scales. At 30 m spatial resolution, both approaches produce similar results, with the smallest difference being less than 15 W m− 2 in mean QH averaged over the entire study area. This is encouraging given the differing architecture and data requirements of the LUMPS and ARM methods. Furthermore, in terms of mean study QH, the results obtained by averaging the original 6 m spatial resolution LUMPS-derived QH values to 30 and 90 m spatial resolution are within ∼ 5 W m− 2 of those derived from averaging the original surface parameter maps prior to input into LUMPS, suggesting that that use of much lower spatial resolution spaceborne imagery data, for example from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) is likely to be a practical solution for heat flux determination in urban areas.

A combined vacuum crushing and sieving (CVCS) system designed to determine noble gas palaeo-temperatures from stalagmite samples

This paper presents a novel extraction device for water and noble gases from speleothem samples for noble gas paleotemperature determination. The “combined vacuum crushing and sieving (CVCS) system” was designed to reduce the atmospheric noble gas contents from air inclusions in speleothem samples by up to 2 orders of magnitude without adsorbing atmospheric noble gases onto the freshly produced grain surfaces, a process that had often hampered noble gas temperature (NGT) determination in the past. We also present the results from first performance tests of the CVCS system processing stalagmite samples grown at a known temperature. This temperature is reliably reproduced by the NGTs derived from Ar, Kr, and Xe extracted from the samples. The CVCS system is, therefore, suitable for routine determinations of accurate NGTs. In combination with stalagmite dating, these NGTs will allow reconstructing past regional temperature evolutions, and also support the interpretation of the often complex stable isotope records preserved in the stalagmites' calcite.

Risk-taking for others under accountability

We let subjects take risky decisions that affect themselves and a passive recipient. Adding a requirement to justify their choices significantly reduces loss aversion. This indicates that such an accountability mechanism may be effective at debiasing loss aversion in agency relations.

Relative importance of transpiration rate and leaf morphological traits for the regulation of leaf temperature

Urban greening solutions such as green roofs help improve residents’ thermal comfort and building insulation. However, not all plants provide the same level of cooling. This is partially due to differences in plant structure and function, including different mechanisms that plants employ to regulate leaf temperature. Ranking of multiple leaf/plant traits involved in the regulation of leaf temperature (and, consequently, plants’ cooling ‘service’) is not well understood. We therefore investigated the relative importance of water loss, leaf colour, thickness and extent of pubescence for the regulation of leaf temperature, in the context of species for semi-extensive green roofs. Leaf temperature were measured with an infrared imaging camera in a range of contrasting genotypes within three plant genera (Heuchera, Salvia and Sempervivum). In three glasshouse experiments (each evaluating three or four genotypes of each genera) we varied water availability to the plants and assessed how leaf temperature altered depending on water loss and specific leaf traits. Greatest reductions in leaf temperature were closely associated with higher water loss. Additionally, in non-succulents (Heuchera, Salvia), lighter leaf colour and longer hair length (on pubescent leaves) both contributed to reduced leaf temperature. However, in succulent Sempervivum, colour/pubescence made no significant contribution; leaf thickness and water loss rate were the key regulating factors. We propose that this can lead to different plant types having significantly different potentials for cooling. We suggest that maintaining transpirational water loss by sustainable irrigation and selecting urban plants with favourable morphological traits is the key to maximising thermal benefits provided by applications such as green roofs.

The neurotoxicity of 5-S-cysteinyldopamine is mediated by the early activation of ERK1/2 followed by the subsequent activation of ASK1/JNK1/2 pro-apoptotic signalling

Parkinson's disease is characterized by the progressive and selective loss of dopaminergic neurons in the substantia nigra. It has been postulated that endogenously formed CysDA (5-S-cysteinyldopamine) and its metabolites may be, in part, responsible for this selective neuronal loss, although the mechanisms by which they contribute to such neurotoxicity are not understood. Exposure of neurons in culture to CysDA caused cell injury, apparent 12-48 h post-exposure. A portion of the neuronal death induced by CysDA was preceded by a rapid uptake and intracellular oxidation of CysDA, leading to an acute and transient activation of ERK2 (extracellular-signal-regulated kinase 2) and caspase 8. The oxidation of CysDA also induced the activation of apoptosis signal-regulating kinase 1 via its de-phosphorylation at Ser967, the phosphorylation of JNK (c-Jun N-terminal kinase) and c-Jun (Ser73) as well as the activation of p38, caspase 3, caspase 8, caspase 7 and caspase 9. Concurrently, the inhibition of complex I by the dihydrobenzothiazine DHBT-1 [7-(2-aminoethyl)-3,4-dihydro-5-hydroxy-2H-1,4-benzothiazine-3-carboxylic acid], formed from the intracellular oxidation of CysDA, induces complex I inhibition and the subsequent release of cytochrome c which further potentiates pro-apoptotic mechanisms. Our data suggest a novel comprehensive mechanism for CysDA that may hold relevance for the selective neuronal loss observed in Parkinson's disease.

Wavelet-based cepstrum calculation

In this paper we present a new wavelet-based algorithm for low-cost computation of the cepstrum. It can be used for real time precise pitch determination in automatic speech and speaker recognition systems. Many wavelet families are examined to determine the one that works best. The results confirm the efficacy and accuracy of the proposed technique for pitch extraction. (C) 2008 Elsevier B.V. All rights reserved.

Fast batch injection analysis of H(2)O(2) using an array of Pt-modified gold microelectrodes obtained from split electronic chips

A fast and robust analytical method for amperometric determination of hydrogen peroxide (H(2)O(2)) based on batch injection analysis (BIA) on an array of gold microelectrodes modified with platinum is proposed. The gold microelectrode array (n = 14) was obtained from electronic chips developed for surface mounted device technology (SMD), whose size offers advantages to adapt them in batch cells. The effect of the dispensing rate, volume injected, distance between the platinum microelectrodes and the pipette tip, as well as the volume of solution in the cell on the analytical response were evaluated. The method allows the H(2)O(2) amperometric determination in the concentration range from 0.8 mu mol L(-1) to 100 mu mol L(-1). The analytical frequency can attain 300 determinations per hour and the detection limit was estimated in 0.34 mu mol L(-1) (3 sigma). The anodic current peaks obtained after a series of 23 successive injections of 50 mu L of 25 mu mol L(-1) H(2)O(2) showed an RSD < 0.9%. To ensure the good selectivity to detect H(2)O(2), its determination was performed in a differential mode, with selective destruction of the H(2)O(2) with catalase in 10 mmol L(-1) phosphate buffer solution. Practical application of the analytical procedure involved H(2)O(2) determination in rainwater of Sao Paulo City. A comparison of the results obtained by the proposed ampermetric method with another one which combines flow injection analysis (FIA) with spectrophotometric detection showed good agreement. (C) 2011 Elsevier B.V. All rights reserved.

Efeitos informais do salário mínimo e pobreza

Avaliamos a efetividade da política de salário mínimo nacional nos segmentos formais e informais do mercado de trabalho brasileiro. A nossa técnica consiste em mapear soluções de canto produzidas pela política de salário mínimo que são posteriormente utilizados como mecanismo de focalização na simulação de limites superiores dos efeitos de reajustes do salário mínimo sobre medidas de pobreza no Brasil. Destacamos dois “efeitos informais” do mínimo: i) a alta porcentagem de trabalhadores sem carteira assinada ganhando exatamente um mínimo, o que potencializa os efeitos aliviadores de pobreza do salário mínimo; e ii) A observação de remunerações que utilizam o salário mínimo, como numerário, em particular no setor formal.

Three essays on local demand for public services

Local provision of public services has the positive effect of increasing the efficiency because each locality has its idiosyncrasies that determine a particular demand for public services. This dissertation addresses different aspects of the local demand for public goods and services and their relationship with political incentives. The text is divided in three essays. The first essay aims to test the existence of yardstick competition in education spending using panel data from Brazilian municipalities. The essay estimates two-regime spatial Durbin models with time and spatial fixed effects using maximum likelihood, where the regimes represent different electoral and educational accountability institutional settings. First, it is investigated whether the lame duck incumbents tend to engage in less strategic interaction as a result of the impossibility of reelection, which lowers the incentives for them to signal their type (good or bad) to the voters by mimicking their neighbors’ expenditures. Additionally, it is evaluated whether the lack of electorate support faced by the minority governments causes the incumbents to mimic the neighbors’ spending to a greater extent to increase their odds of reelection. Next, the essay estimates the effects of the institutional change introduced by the disclosure on April 2007 of the Basic Education Development Index (known as IDEB) and its goals on the strategic interaction at the municipality level. This institutional change potentially increased the incentives for incumbents to follow the national best practices in an attempt to signal their type to voters, thus reducing the importance of local information spillover. The same model is also tested using school inputs that are believed to improve students’ performance in place of education spending. The results show evidence for yardstick competition in education spending. Spatial auto-correlation is lower among the lame ducks and higher among the incumbents with minority support (a smaller vote margin). In addition, the institutional change introduced by the IDEB reduced the spatial interaction in education spending and input-setting, thus diminishing the importance of local information spillover. The second essay investigates the role played by the geographic distance between the poor and non-poor in the local demand for income redistribution. In particular, the study provides an empirical test of the geographically limited altruism model proposed in Pauly (1973), incorporating the possibility of participation costs associated with the provision of transfers (Van de Wale, 1998). First, the discussion is motivated by allowing for an “iceberg cost” of participation in the programs for the poor individuals in Pauly’s original model. Next, using data from the 2000 Brazilian Census and a panel of municipalities based on the National Household Sample Survey (PNAD) from 2001 to 2007, all the distance-related explanatory variables indicate that an increased proximity between poor and non-poor is associated with better targeting of the programs (demand for redistribution). For instance, a 1-hour increase in the time spent commuting by the poor reduces the targeting by 3.158 percentage points. This result is similar to that of Ashworth, Heyndels and Smolders (2002) but is definitely not due to the program leakages. To empirically disentangle participation costs and spatially restricted altruism effects, an additional test is conducted using unique panel data based on the 2004 and 2006 PNAD, which assess the number of benefits and the average benefit value received by beneficiaries. The estimates suggest that both cost and altruism play important roles in targeting determination in Brazil, and thus, in the determination of the demand for redistribution. Lastly, the results indicate that ‘size matters’; i.e., the budget for redistribution has a positive impact on targeting. The third essay aims to empirically test the validity of the median voter model for the Brazilian case. Information on municipalities are obtained from the Population Census and the Brazilian Supreme Electoral Court for the year 2000. First, the median voter demand for local public services is estimated. The bundles of services offered by reelection candidates are identified as the expenditures realized during incumbents’ first term in office. The assumption of perfect information of candidates concerning the median demand is relaxed and a weaker hypothesis, of rational expectation, is imposed. Thus, incumbents make mistakes about the median demand that are referred to as misperception errors. Thus, at a given point in time, incumbents can provide a bundle (given by the amount of expenditures per capita) that differs from median voter’s demand for public services by a multiplicative error term, which is included in the residuals of the demand equation. Next, it is estimated the impact of the module of this misperception error on the electoral performance of incumbents using a selection models. The result suggests that the median voter model is valid for the case of Brazilian municipalities.

Atitude face a profissão de professor: um estudo sobre a satisfação no trabalho

O presente estudo teve como objetivo investigar a atitude do professor face à sua profissão. Pretendeu-se determinar, nesta atitude, a influência dos fatores tempo de atuação no magistério, tipo de formação universitária e pertinência à rede de ensino oficial ou particular. Uma vez que não há uma definição de atitude que cubra todos os tipos de determinação atitudinal, na presente investigação, considerou-se que a atitude envolve um estado de satisfação ou insatisfação em relação aos seguintes objetos atitudinais considerados como pertinentes à profissão de professor: desempenho no trabalho, motivação para o trabalho, status social da profissão, status econômico da profissão, formação técnica, atualização profissional, apoio à profissão, coesão na classe e contribuição para a educação. A amostra foi retirada da população de professores da Rede Estadual e Particular de Ensino do Município de Cabo Frio, no Estado do Rio de Janeiro. Para a pesquisa, elaborou-se uma escala de atitude em duas fases distintas: a escala de atitude - forma experimental e a escala de atitude -forma definitiva. Os resultados encontrados permitem concluir que o fator tempo de atuação no magistério provoca uma diferença significativa quanto ao estado de satisfação do professor, pois o escore médio obtido na escala pelos professores com 5 anos ou mais de atuação foi significativamente superior ao escore médio obtido pelos professores com menos de 5 anos de atuação no magistério. Os outros fatores, tipo de formação universitária e pertinência à rede de ensino particular ou oficial, não se mostraram significativos para o estabelecimento de diferenças significativas quanto ao estado de satisfação do professor.

Formação de agenda e formulação de uma política pública no Brasil: o caso do Fundo Social do Pré-Sal

Entender o processo que engendra o Fundo Social do Pré-Sal demanda compreender a nova regulação do petróleo, aprovada em 2010. Esta tese empreende análise da trajetória da regulação do petróleo no Brasil, partindo da aprovação da Lei do Petróleo (1997), e avalia como ideias e interesses interagem com instituições vigentes, ação política e condições econômicas, para gerar nova configuração setorial. Combinando visão abrangente do institucionalismo histórico aos métodos robustos do institucionalismo da escolha racional para determinação das preferências dos atores, este trabalho aponta para a determinação histórica das escolhas dos agentes. Em termos empíricos, mostra como as condições econômicas foram determinantes na permeabilidade da política econômica brasileira aos interesses representados pelas instituições multilaterais, esclarece a importância do volume de reservas de petróleo na determinação do novo marco regulatório; e aponta razão para a escalada de valor da Petrobras após 1997.

Arbitragem regulatória X one size fits all: a discricionariedade na regulação bancária internacional entre Cila e Caríbdis

As peculiaridades da atividade bancária - normalmente vista como fundamental à persecução do desenvolvimento, bem como bastante influenciada pelo direito - estimularam a emergência de um regime internacional de regulação da categoria. Tal advento se deu na esteira dos trabalhos realizados por organizações internacionais, como o Comitê da Basileia (BCBS) e o Comitê de Estabilidade Financeira (FSB), e em virtude da percepção de estarmos em um mundo no qual os mercados estão muito interligados, mas permanecem nacionalmente regulados. À parte da discussão do mérito e efetividade dos padrões regulatórios propostos por essas organizações, em um contexto no qual uma série de países busca implementá-los, interessa ao presente trabalho perscrutar os elementos que definem o grau adequado de discricionariedade de implementação conferida na formulação desses. A análise de tal problema sugere a existência de dois extremos a se evitar: a arbitragem regulatória e o one size fits all. Evitar a arbitragem regulatória é uma preocupação da literatura de regulação bancária que se traduz em conter uma variação muito acentuada entre os regimes regulatórios de diferentes jurisdições. Isso enseja três vetores favoráveis a um menor grau de discricionariedade, representado por desígnios de maior coordenação, maior competitividade e de evitar uma race to the bottom regulatória entre os países. Já evitar o one size fits all é uma preocupação recorrente da literatura de direito e desenvolvimento que sugere a necessidade de se atentar para as peculiaridades locais na formulação de políticas regulatórias. Por sua vez, isso enseja outros três vetores, dessa vez em direção a um maior grau de discricionariedade. Sendo esses representados por preocupações com a eficiência das medidas adotadas, com a garantia de um espaço de manobra que respeite a autodeterminação dos países - ao menos minorando eventuais déficits democráticos da estipulação de padrões internacionais - e com a viabilidade prática do experimentalismo. A fim de analisar esse problema e levando em conta esses extremos, propõe-se uma estratégia bipartida: a construção de um enquadramento teórico e a verificação de uma hipótese de pesquisa, segundo a qual um caso específico de regulação bancária pode demonstrar como esses elementos interagem na definição do grau de discricionariedade. Assim, em um primeiro momento - após a necessária contextualização e descrição metodológica - é construído um framework teórico do problema à luz da literatura da regulação bancária e do instrumental utilizado pelas discussões acerca do impacto do direito no desenvolvimento. Discussões essas que há anos têm abordado a formulação de padrões internacionais e a sua implementação em contextos nacionais diversos. Também nesse primeiro momento e como parte da construção dos alicerces teóricos, procede-se a um excurso que busca verificar a hipótese da confiança no sistema bancário ser uma espécie de baldio (common), bem como suas possíveis consequências. Partindo desse enquadramento, elege-se o segmento de regulação bancária relativo aos garantidores de depósito para uma análise de caso. Tal análise - realizada com subsídios provenientes de pesquisa bibliográfica e empírica - busca demonstrar com que grau de discricionariedade e de que forma se deu a formulação e implementação de padrões internacionais nesse segmento. Ao fim, analisa-se como os vetores determinantes do grau de discricionariedade interagem no caso dos garantidores de depósitos, bem como as sugestões possivelmente inferíveis dessa verificação para os demais segmentos da regulação bancária.

Inexpensive solution for real-time video and image stitching

Image stitching is the process of joining several images to obtain a bigger view of a scene. It is used, for example, in tourism to transmit to the viewer the sensation of being in another place. I am presenting an inexpensive solution for automatic real time video and image stitching with two web cameras as the video/image sources. The proposed solution relies on the usage of several markers in the scene as reference points for the stitching algorithm. The implemented algorithm is divided in four main steps, the marker detection, camera pose determination (in reference to the markers), video/image size and 3d transformation, and image translation. Wii remote controllers are used to support several steps in the process. The built‐in IR camera provides clean marker detection, which facilitates the camera pose determination. The only restriction in the algorithm is that markers have to be in the field of view when capturing the scene. Several tests where made to evaluate the final algorithm. The algorithm is able to perform video stitching with a frame rate between 8 and 13 fps. The joining of the two videos/images is good with minor misalignments in objects at the same depth of the marker,misalignments in the background and foreground are bigger. The capture process is simple enough so anyone can perform a stitching with a very short explanation. Although real‐time video stitching can be achieved by this affordable approach, there are few shortcomings in current version. For example, contrast inconsistency along the stitching line could be reduced by applying a color correction algorithm to every source videos. In addition, the misalignments in stitched images due to camera lens distortion could be eased by optical correction algorithm. The work was developed in Apple’s Quartz Composer, a visual programming environment. A library of extended functions was developed using Xcode tools also from Apple.

Comparação de procedimentos de quantificação de nitrato em tecido vegetal

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da área de amostragem na determinação de perdas totais na colheita de soja

A metodologia, atualmente utilizada, para a determinação das perdas na colheita de soja, que consiste na utilização de armações de 2 m², vem fornecendo resultados com alto coeficiente de variação, o que dificulta detectar diferenças significativas entre os tratamentos, mesmo que esta diferença apresente valores numéricos muito altos. em função deste problema, objetivou-se avaliar o efeito das armações sobre a quantificação das perdas totais na colheita da cultura da soja, alterando-se a velocidade de deslocamento da colhedora e a abertura entre o cilindro e o côncavo. O delineamento experimental foi em blocos casualizados, em esquema fatorial 2 x 3 x 2, totalizando 12 tratamentos com quatro repetições. Os resultados evidenciaram que o coeficiente de variação para a armação de 2 m² foi de 88,26%, enquanto que para a armação de 3 m² este valor foi de 32,85%, e que com a armação de 2 m² foram detectadas perdas totais de 45 kg ha-1, enquanto que com a de 3 m² quantificou-se 73 kg ha-1, indicando que a área das armações interfere na quantificação das perdas totais na cultura da soja.