Comparação da eficiência térmica de trocadores de calor no laboratório de sistemas térmicos da Faculdade de Engenharia

This work aims to verify and compare the efficiency of heat exchangers used in the thermal systems laboratory at Faculdade de Engenharia do Campus de Guaratinguetá - UNESP. Basically, it has been studied two types of heat exchangers: plate type, operating in parallel flow and counter-flow, shell and tube type and also operating in parallel flow and counter flow. Initially it has been presented the didactic equipment and procedures for use of these heat exchangers in the proposed experiments. With the results obtained from the experiments, comparisons were made in order to define the behavior of the heat exchangers regarding some variables. In the study, one comes to the conclusion that the results from shell and tube type of heat exchanger, used in the thermal systems lab, are superior in all conditions analyzed

Subsídios para elaboração de plano municipal de gestão de resíduos sólidos orgânicos para o município de Rio Claro-SP

The research aims to propose grants for development of Municipal Plan for the Management of Organic Solid Waste generated in the municipality of Rio Claro. The research universe was composed of organic waste generators establishments (markets and grocers). From the registry of commercial establishments provided by the municipal government were identified who presented this typology, which totaled 38 establishments. In this universe the interview was conducted in 15 establishments obtained by directed sampling based on the characteristics of size, type and location. The data collected were the amount generated, disposal of waste, waste separation, collection frequency, reasons for the disposal of waste, frequency of purchase of products. From the data obtained in the field, we estimated the total generation of organic waste in this segment for the municipality. Then, the estimated costs for implementation and operation of a composting center, a way to subsidize the implementation of the management plan was carried out. We opted for the aerobic composting process by the simplicity of operation and because it is a technique already known. The average waste generation was established by tracks (size) with: stores up to 4 boxes (classified as small) generate on average 1511 kg / month, 40% of organic waste, the 5-9 boxes (small/midsize) generate on average 4338 kg / month, 35% organic and the 10 to 19 boxes (midsize) generate on average 7647 kg / month with 32% organic. In total establishments generate 105 t/ month of waste, with 35t / month of organics. 94% of establishments are in font segregation of waste into recyclable, organic and waste, indicating that the proposed management of organic waste is amenable to application without many changes in existing routine in stores. Recyclables are sent for recycling through selective collection held by the cooperative, while the organics are destined for the landfill and feed. The results indicate...

Perfil dos pesquisadores PQ do CNPQ da área de Engenharia de Produção

There is a need for ongoing evaluation of the researchers not only engineering and production in all areas of knowledge engineering. To check the quality and veracity of scientific production, the CNPq is a brazillian government agency designed to evaluate researchers, classify them and give the encouragement and incentive for their research. This study quantifies the CNPq researchers in the field of Production Engineering according to the time of operation in research, number of guidelines for masters and doctoral, number of articles in national and international journals or magazines and congresses. The classification of these researchers, according to the proposed quantification, is confronted with the level of research they have in CNPq. The researcher starts his career at level 2, after it spending levels for 1D, 1C, 1B reaches to the highest level 1A. The main conclusion to be drawn from this study is that excellent researchers with a significant number of guidelines, bitter years in the early levels because of the rules of the CNPq which only allows a researcher to achieve the highest levels after many years of research

Estudo e seleção de um aparelho de ar condicionado para ônibus

The study and selection of an equipment of air conditioner for any type of environment, should be made without overestimate or undersizing the project. The undersizing does not provide an adequate comfort temperature if the environment is too hot because the air conditioner does not remove all the heat necessary in the environment. But if the project is oversized, energy consumption is higher and there is an unnecessary cost. To prevent these failures is necessary to make a calculation of the thermal load on the environment and choose the equipment that has a higher cooling capacity than the calculated heat load and closer to the calculated heat load. In this graduate work will be chosen an air-conditioned equipment for bus, showing the calculations made for the thermal load for various types of heat gain in this type of vehicle. The thermal load on vehicles is more complicated to calculate than in areas because there are several factors that vary with the movement of the vehicle. It will also explain the compression refrigeration cycle, which is the cooling system used in vehicles because it is weightless, compact and lower cost. From the calculated heat load, it will be chosen an air conditioner that best suits the project and, finally, a brief presentation of the selected equipment will be made

Estudo da eficiência de reforços estruturais em vigas de concreto armado com o uso de chapas de aço coladas com resina epóxi: uma análise qualitativa

In civil engineering, a structure is the whole sustainment of a construction and, thus, it is important that it remains intact throughout its lifetime. An engineering construction must last for decades without losing its functionality. However its purpose may be altered and several times the original structure does not meet the new needs of use. Still, in new buildings, the functionality is altered due to possible flaws in execution and the structure, invariably does not reach the desired solicitation needs. In cases like this, the commonly adopted solutions are, basically, the demolishment followed by the reconstruction of the desired mold or the structural reinforcement. This second option, for long years, has not been put to practice due to certain factors such as the high costs for its implantation, use of inadequate reinforcement execution techniques, and the culture of people involved in the area regarding its use and, in this case, the option would always be the reconstruction. Thoughtout the years, some techniques were developed to allow the execution of structural reinforcements with low costs and in efficient ways. An interesting, fast, efficient and economical technique is the structural reinforcement through metal sheets put together with epoxy resin that can be applied in beams, slabs and pillars. In the present work the different behavior of beams reinforced with this technique. Steel is a very recommended material for these reinforcements due to its characteristics related to traction, compression and the effectiveness of the technique related to its cost. For the attachment the epoxy resin is recommended, since it allows the joining of two materials, in this case, steel and concrete. The efficiency of this union is so considerably high that it rarely produces any flaws in adherence and, normally, when it happens it is due to problems in the execution process, not in the union of materials

Uso do modelo de simulação 'ABC 6' para avaliação de áreas sujeitas à ocorrência de ondas de cheia e corridas de massa/detritos: estudo de caso na bacia do Ribeirão da Prata (SP)

Pipelines are linear engineering works, designed mostly for transporting oil and its derivatives for long distances, furnishing even the farthermost zones of the country. Due to oil sector needs to ensure for the safety and conservation of its properties, several geotechnical studies are being held at the pipelines field, in order to preserve this important transportation, and also to prevent accidents, which might seriously compromise the environment and the population who lives around it. The OSBRA pipeline, who connects the city of Paulínia to the capital Brasília, is one of these engineering works that deserves to be pointed out. This research, performed at the Ribeirão da Prata Basin, was a pilot study conducted with the main objective of testing the current methodology efficiency, for future applications in the closest watersheds to the OSBRA pipeline. The objective of this research is to analyze flood wave and debris flow processes in a non-fictional watershed, by comparing two different kinds of methods: the first one based on simulation models (software ‘ABC 6’), and the other one by flood wave and debris flow susceptibility mapping. The results from the hydrological modeling were both hydrographs and ietographs that estimated values of outputs and infiltration. To construct the susceptibility maps were necessary three other maps: ground use and occupation maps, divided according to the different protection degrees that were offered to the ground; maps of dam locations in the area and physiographic compartimentation maps, divided according to the local geology. To complete the methodology, the results were collected from both methods for comparison. The obtained product for this methodology was series of data whose different susceptibility degrees to flood wave and debris flow could define the safest route for a pipeline crossing in this watershed...

Utilização de dados e técnicas de Sensoriamento Remoto no monitoramento da infestação por plantas aquáticas em reservatório de hidrelétrica

As an effect of the imbalance caused by the damming of rivers and pollution, it has been observed a growing aquatic plants infestation in reservoirs for the generation of electricity. In addition to power generation, these sites have also been used for various other purposes, including recreation, attracting water and navigation. Thus it is important to evaluate these water bodies periodically, in order to verify the leading conditions to the growth of algae, plants and other organisms. In this sense, Remote sensing technology can be a valuable tool for mapping and monitoring the occupation of land in the vicinity of the water body and the optical properties of water, to provide subsidies for the effective management of these aquatic environments. This paper aims to perform the monitoring of the occurrence of aquatic plants in Salto Grande Hydropower Reservoir, located in Americana (SP) and, periodically, map the occupation of land in the vicinity of the water body, through multispectral images taken by sensors on the satellites Landsat series in seven consecutive years: 2004, 2005, 2006, 2007, 2008, 2009 and 2010. The adopted methodological procedure included the images data and the classification of multispectral images to map, every year, the location and extension of the area infested by aquatic plants and the occupation of land

Elaboração de mapa de susceptibilidade de corridas de massa/detritos e ondas de cheia, aplicado a empreendimentos dutoviários, na bacia hidrográfica do Ribeirão da Prata (SP)

Given the intense expansion of the industries in Brazil and the discovery of hydrocarbons in the pre-salt layer of the Santos and Campos Basin, there is a need to expand the distribution of oil and gas network in the country. The present work aims to present the development of susceptibility map by two distinct methods of two events (debris flows and full wave), applied to the establishment of pipelines on Ribeirão da Prata Basin. The research area covers two municipalities: São João da Boa Vista and Águas da Prata, in total 145 km2. In the paper was used the methodology proposed by Zaine (2011) for the physiographic subdivision method, which uses geological maps, geomorphological maps, digital terrain models and aerial photographs, used to extract the main elements of the physical environment, as rivers, lines, ridges, tops forms and valley forms and historical processes. Thus, the basin was divided into 11 physiographic zones, considering the following elements: thickness of soil, rock type, geomorphology, amplitude, ridges orientation, erosion occurences and mass movements. Were subsequently performed location maps of dams, that had as main purpose to localize major dams in the study area along with their area and perimeter of the reservoir, and land use map that subdivided the area in woody vegetation, permanent culture, temporary culture and urban area. Along with the preparation of the auxiliar maps was conducted a field campaign with three days and approximately 2 points per km2, which aimed to better understand the physical environment and check the main peculiarities of the study area. Criteria have been established for susceptibility maps physiographic subdivision and land use, and a survey of criteria weights used in each map for both processes under study. For the preparation of susceptibility maps were adopted two different methods, which treat the weighted average and the multiplicand. The weighted average method it is...

Expressão e localização de aquaporinas no epidídimo do gerbilo, Meriones unguiculatus, em diferentes fases do desenvolvimento pós-natal

Aquaporins (AQPs) are membrane protein channels expressed in a wide variety of cells and tissues that are involved in the transport of water. In the male excurrent duct, the movement of fluid and solutes across the epithelium is essential for establishing the proper luminal environment in which sperm mature and are stored. The initial aim of the present propose is to localize AQP 2 e 9 in epithelium of the initial segment, caput, corpus and cauda epididymidis in Mongolian gerbil during postnatal development (10, 30, 60, 120 and 300 days), observing possible changes in the pattern of expression of the AQPs along the postnatal development. The animals will be killed by inhalation of carbon dioxide. After euthanasia, the epididymis will be removed and the different regions will be isolated. The biological material obtained will be processed in accordance with the routines of histological techniques and imunnohistochemistry to study the expression and localization of the AQPs 2 and 9. The results obtained will be analyzed and photographed in conventional light microscope

Estudo de caso: formulação de custo de um produto de usinagem em uma pequena empresa

Many variables are indirectly involved in the transformation of raw material into a metallurgical industry, such as machine hours, hours of hand labor directly and / or indirect, setup time, etc. This research focuses on the complexity of formulating the cost of metallurgical products, based on a case study, in which one has incurred a large loss on the sale of a product called Punch. The main objective of this work is to define the variables of the cost of members and other metallurgical products, so simplified general, checking what were the failures costing the case studied, in order to help others. The method of formulating cost was determined as recommended by SEBRAE guidance for small businesses. The results showed a loss R$ 13.201,00 in the batch of 15 units of punch. Possible improvements have been identified for reducing the production cost

Comparação de compósitos obtidos via RTM de resina epóxi e fibra de carbono com e sem descontinuidade nos tecidos

Technology is growing interest in the use of composites, due to the requirement of lighter materials and more resistant, factors essential to meet the project specifications and reduce the operational cost. In the production of high performance structural composites, considering the aerospace criteria, the domestic industry has shown interest in the process of resin transfer molding (RTM) for reproducibility and low cost. This process is suitable for producing components of polymeric composites with relatively simple geometries, consistent thicknesses, high quality finish with no size limitations. The objective of this work was machined carbon steel to make a matched-die tooling for RTM and produce two composite plates of epoxy resin and carbon fiber fabric with and without induced discontinuities, which were compared towards their impregnation with ultrasound, their properties via tensile tests and thermal analysis. In ultrasonic inspection, it was found good impregnation of the preform of both composites. In the thermal analysis it was possible to check the degradation temperature of the composites, the glass transition temperature and it was found that the composites showed no effective cure cycles, but presented good performance in the tensile test when compared with aluminum alloy 7050 T7451 . The results showed that the injection strategy was appropriate since the laminate exhibited a good quality for the proposed application

Planejamento do projeto de adequação de segurança de máquinas numa multinacional produtora de absorventes descartáveis

Currently, more and more processing activities within companies are seen as projects. Project management, as a theory, is well developed and is accepted today in the market as a required competency for organizations. Various methods and techniques have been developed covering all aspects of a project, from conception to final delivery of the products produced by the same. The overall objective of the study is to report the experience of developing the project planning for the machine safety adequacy in robotic cells pallet manufacturers, demonstrating the importance of knowledge in the area of project management for the productive sector, and focusing on the difficulties encountered in particular project. Thus was developed the scope management by a team composed of different areas of engineering, and implementation strategy of the project was chosen from the tool BVOA, with the possible subsequent definition of the project schedule. Furthermore, the risk planning was analyzed using FMECA tool that predicts and mitigates potential failures. It is concluded that the constant and direct relationship between the different stakeholders generates more efficient results, reaching the demands of the project. The definition of alternatives for implementation enabled the viability of the project, and the study of failures was positive to enrich the analysis of planning

Concepção e implementação de um serviço baseado em localização na plataforma ANDROID/GOOGLE

The mobile application proposed in this undergraduate project, classified as a Location-Based Service and named Traveller, was developed to support users of mobile phones equipped with GPS in unknown locations by providing information about weather, location of users and stores in urban areas. The mobile devices whose this project is intended are those equipped with Android. The programming language Java was selected and the Eclipse development environment was used along with the toolkit for developing Android (ADT - Android Development Tools)

Gestão de Estoques: análise e melhoria do processo de inventário físico em uma indústria siderúrgica

Accuracy in physical inventory process is essential to develop anefficient inventorycontrol. This ensures the availability of products and ensure that the information contained in the information systems areinaccordancewith the reality of inventories. The inventory management policies of the company aim ofthis study established that all the materials in their inventory must becounted, which is proving a challenge. Therefore, the aim of thiswork is to identify the critical inventories and analyze them, seeking flaws and possible improvements in the inventory count process. For this, we used the tools of quality management, such as Pareto and Cause and Effect Diagrams in an action research. The results show that the stocks of finished products are critical in volume and can be hampered by a lack of training and personnel trained in performing the process, as well as limitations in ERP used. With the actions taken against these problems, we could notice an improvement in the process, because the data collection and processing of data has become easier, besides the occurrence of errors decreased. In addition, there was an acceleration in meeting targets compared to the previous period

Verificação da eficiência da metodologia Seis Sigma na redução da divergência de estoque em uma indústria de condutores de fluídos

This work was developed in order to reduce the discrepancy found between the stock data of an item in the system and the amount found physically in stock in the company presented on this study case. Therefore, this paper makes a study on system of information that can assist in the collection, control and manipulation of data regarding the company's stock. It is very important to do the inventory management, so we can control the level of this sub-product to meet sales orders and production. In the study discussed below, we used the Six Sigma methodology to identify points that had flaws in the process and thus improve their work where the results show grater process control and provide a reliable database to the point where no further problems of lack of components in stock