Design of nonlinear regenerative transmission systems with high capacity

We present the design of nonlinear regenerative communication channels that have capacity above the classical Shannon capacity of the linear additive white Gaussian noise channel. The upper bound for regeneration efficiency is found and the asymptotic behavior of the capacity in the saturation regime is derived. © 2013 IEEE.

Impact of reduced complexity inverse Volterra series transfer function-based nonlinear equalizer in coherent OFDM systems for next-generation core networks

A modern electronic nonlinearity equalizer (NLE) based on inverse Volterra series transfer function (IVSTF) with reduced complexity is applied on coherent optical orthogonal frequency-division multiplexing (CO-OFDM) signals for next-generation long- and ultra-long-haul applications. The OFDM inter-subcarrier crosstalk effects are explored thoroughly using the IVSTF-NLE and compared with the case of linear equalization (LE) for transmission distances of up to 7000 km. © 2013 IEEE.

Complex Oscillations and Limit Cycles in Autonomous Two-Component Incommensurate Fractional Dynamical Systems

MSC 2010: 26A33, 34D05, 37C25

Construction and experimental study of an elevation linear Fresnel reflector

This paper outlines a novel elevation linear Fresnel reflector (ELFR) and presents and validates theoretical models defining its thermal performance. To validate the models, a series of experiments were carried out for receiver temperatures in the range of 30-100 °C to measure the heat loss coefficient, gain in heat transfer fluid (HTF) temperature, thermal efficiency, and stagnation temperature. The heat loss coefficient was underestimated due to the model exclusion of collector end heat losses. The measured HTF temperature gains were found to have a good correlation to the model predictions - less than a 5% difference. In comparison to model predictions for the thermal efficiency and stagnation temperature, measured values had a difference of -39% to +31% and 22-38%, respectively. The difference between the measured and predicted values was attributed to the low-temperature region for the experiments. It was concluded that the theoretical models are suitable for examining linear Fresnel reflector (LFR) systems and can be adopted by other researchers.

Effect of second order signal-noise interactions in nonlinearity compensated optical transmission systems

In this Letter, we theoretically and numerically analyze the performance of coherent optical transmission systems that deploy inline or transceiver based nonlinearity compensation techniques. For systems where signal-signal nonlinear interactions are fully compensated, we find that beyond the performance peak the signal-to-noise ratio degradation has a slope of 3 dBSNR/dBPower suggesting a quartic rather than quadratic dependence on signal power. This is directly related to the fact that signals in a given span will interact not only with linear amplified spontaneous emission noise, but also with the nonlinear four-wave mixing products generated from signal-noise interaction in previous (hitherto) uncompensated spans. The performance of optical systems employing different nonlinearity compensation schemes were numerically simulated and compared against analytical predictions, showing a good agreement within a 0.4 dB margin of error.

A study of learners' perceived value and satisfaction for implied effectiveness of online learning systems

Online learning systems (OLS) have become center stage for corporations and educational institutions as a competitive tool in the knowledge economy. The satisfaction construct has received extensive coverage in information systems literature as an indicator of effectiveness but has been criticized for lack of validity; yet, the value construct has been largely ignored, although it has a long history in psychology, sociology, and behavioral science. The purpose of this dissertation is to investigate the value and satisfaction constructs in the context of OLS, and their perceived by learners relationship for implied effectiveness of OLS. ^ First, a qualitative phase is employed to gather OLS values from learners' focus groups, followed by a pilot phase to refine a proposed instrument, and a main phase to validate the survey. Responses were received from 75 students in four focus groups, 141 in the pilot, and 207 the main survey. Extensive data cleaning and exploratory factor analysis were done to identify factors of learners' perceived value and satisfaction of OLS. Then, Value-Satisfaction grids and the Learners' Value Index of Satisfaction (LeVIS) were developed as benchmarking tools of OLS. Moreover, Multicriteria Decision Analysis (MCDA) techniques were employed to impute value from satisfaction scores in order to reduce survey response time. ^ The results provided four satisfaction and four value factors with high reliability (Cronbach's α). Moreover, value and satisfaction were found to have low linear and nonlinear correlations, indicating that they are two distinct uncorrelated constructs. This is consistent with the literature. Value-Satisfaction grids and the LeVIS index indicated relatively high effectiveness for technology and support characteristics, relatively low effectiveness for professor's characteristics, while course and learner characteristics indicated average effectiveness. ^ The main contributions of this study include identifying, defining, and articulating the relationship between value and satisfaction constructs as assessment of users' implied IS effectiveness, as well as assessing the accuracy of MCDA procedures to predict value scores, thus reducing by half the survey questionnaire size. ^

Quantifying the effects of temperature and concentration on variable-density flow in numerical modeling of groundwater systems: Implications for predictive uncertainty and data collection

Groundwater systems of different densities are often mathematically modeled to understand and predict environmental behavior such as seawater intrusion or submarine groundwater discharge. Additional data collection may be justified if it will cost-effectively aid in reducing the uncertainty of a model's prediction. The collection of salinity, as well as, temperature data could aid in reducing predictive uncertainty in a variable-density model. However, before numerical models can be created, rigorous testing of the modeling code needs to be completed. This research documents the benchmark testing of a new modeling code, SEAWAT Version 4. The benchmark problems include various combinations of density-dependent flow resulting from variations in concentration and temperature. The verified code, SEAWAT, was then applied to two different hydrological analyses to explore the capacity of a variable-density model to guide data collection. ^ The first analysis tested a linear method to guide data collection by quantifying the contribution of different data types and locations toward reducing predictive uncertainty in a nonlinear variable-density flow and transport model. The relative contributions of temperature and concentration measurements, at different locations within a simulated carbonate platform, for predicting movement of the saltwater interface were assessed. Results from the method showed that concentration data had greater worth than temperature data in reducing predictive uncertainty in this case. Results also indicated that a linear method could be used to quantify data worth in a nonlinear model. ^ The second hydrological analysis utilized a model to identify the transient response of the salinity, temperature, age, and amount of submarine groundwater discharge to changes in tidal ocean stage, seasonal temperature variations, and different types of geology. The model was compared to multiple kinds of data to (1) calibrate and verify the model, and (2) explore the potential for the model to be used to guide the collection of data using techniques such as electromagnetic resistivity, thermal imagery, and seepage meters. Results indicated that the model can be used to give insight to submarine groundwater discharge and be used to guide data collection. ^

Automating Hospitality Information: Network Technology and Systems Management

The local area network (LAN) interconnecting computer systems and soft- ware can make a significant contribution to the hospitality industry. The author discusses the advantages and disadvantages of such systems.

Does landscape context affect habitat value? The importance of seascape ecology in back-reef systems

Seascape ecology provides a useful framework from which to understand the processes governing spatial variability in ecological patterns. Seascape context, or the composition and pattern of habitat surrounding a focal patch, has the potential to impact resource availability, predator-prey interactions, and connectivity with other habitats. For my dissertation research, I combined a variety of approaches to examine how habitat quality for fishes is influenced by a diverse range of seascape factors in sub-tropical, back-reef ecosystems. In the first part of my dissertation, I examined how seascape context can affect reef fish communities on an experimental array of artificial reefs created in various seascape contexts in Abaco, Bahamas. I found that the amount of seagrass at large spatial scales was an important predictor of community assembly on these reefs. Additionally, seascape context had differing effects on various aspects of habitat quality for the most common reef species, White grunt Haemulon plumierii. The amount of seagrass at large spatial scales had positive effects on fish abundance and secondary production, but not on metrics of condition and growth. The second part of my dissertation focused on how foraging conditions for fish varied across a linear seascape gradient in the Loxahatchee River estuary in Florida, USA. Gray snapper, Lutjanus griseus, traded food quality for quantity along this estuarine gradient, maintaining similar growth rates and condition among sites. Additional work focused on identifying major energy flow pathways to two consumers in oyster-reef food webs in the Loxahatchee. Algal and microphytobenthos resource pools supported most of the production to these consumers, and body size for one of the consumers mediated food web linkages with surrounding mangrove habitats. All of these studies examined a different facet of the importance of seascape context in governing ecological processes occurring in focal habitats and underscore the role of connectivity among habitats in back-reef systems. The results suggest that management approaches consider the surrounding seascape when prioritizing areas for conservation or attempting to understand the impacts of seascape change on focal habitat patches. For this reason, spatially-based management approaches are recommended to most effectively manage back-reef systems.

Survivability of Deterministic Dynamical Systems

Acknowledgements We acknowledge gratefully the support of BMBF, CoNDyNet, FK. 03SF0472A, of the EIT Climate-KIC project SWIPO and Nora Molkenthin for illustrating our illustration of the concept of survivability using penguins. We thank Martin Rohden for providing us with the UK high-voltage transmission grid topology and Yang Tang for very useful discussions. The publication of this article was funded by the Open Access Fund of the Leibniz Association.

Nonholonomically Constrained Dynamics and Optimization of Rolling Isolation Systems

Rolling Isolation Systems provide a simple and effective means for protecting components from horizontal floor vibrations. In these systems a platform rolls on four steel balls which, in turn, rest within shallow bowls. The trajectories of the balls is uniquely determined by the horizontal and rotational velocity components of the rolling platform, and thus provides nonholonomic constraints. In general, the bowls are not parabolic, so the potential energy function of this system is not quadratic. This thesis presents the application of Gauss's Principle of Least Constraint to the modeling of rolling isolation platforms. The equations of motion are described in terms of a redundant set of constrained coordinates. Coordinate accelerations are uniquely determined at any point in time via Gauss's Principle by solving a linearly constrained quadratic minimization. In the absence of any modeled damping, the equations of motion conserve energy. This mathematical model is then used to find the bowl profile that minimizes response acceleration subject to displacement constraint.

Degeneracy of velocity constraints in rigid body systems

The equations governing the dynamics of rigid body systems with velocity constraints are singular at degenerate configurations in the constraint distribution. In this report, we describe the causes of singularities in the constraint distribution of interconnected rigid body systems with smooth configuration manifolds. A convention of defining primary velocity constraints in terms of orthogonal complements of one-dimensional subspaces is introduced. Using this convention, linear maps are defined and used to describe the space of allowable velocities of a rigid body. Through the definition of these maps, we present a condition for non-degeneracy of velocity constraints in terms of the one dimensional subspaces defining the primary velocity constraints. A method for defining the constraint subspace and distribution in terms of linear maps is presented. Using these maps, the constraint distribution is shown to be singular at configuration where there is an increase in its dimension.

Highly linear reconfigurable UWB filters with independently controlled dual bandnotch

This letter proposes a high-linearity reconfigurable lower ultra-wideband (3.1–5.25 GHz) filter with independently controlled dual bandnotch at WiMAX 3.5 GHz band and satellite communication systems 4.2 GHz band. Reconfigurability has been achieved by the implementation of Graphene based switches (simulation only) and PIN diodes (measurements). The simulation and measurement results in OFF state show an entire bandpass response from 3.1 GHz to 5.25 GHz and with a very low insertion loss. In ON state, the results show that sharp rejections at 3.5 GHz and 4.2 GHz are achieved, with a low passband insertion loss. The two bandnotch operate independently of each other; thus allowing to control the behaviour of the required bandnotch. The third order intermodulation products were also measured in OFF and ON states and the linearity results have been presented. The filter is able to achieve a high performance with good linearity and no significant loss.

Molecular docking and geographical information systems as tools to assess the potential impact of veterinary medicines on non-target organisms and the environment

Veterinary medicines (VMs) from agricultural industry can enter the environment in a number of ways. This includes direct exposure through aquaculture, accidental spillage and disposal, and indirect entry by leaching from manure or runoff after treatment. Many compounds used in animal treatments have ecotoxic properties that may have chronic or sometimes lethal effects when they come into contact with non-target organisms. VMs enter the environment in mixtures, potentially having additive effects. Traditional ecotoxicology tests are used to determine the lethal and sometimes reproductive effects on freshwater and terrestrial organisms. However, organisms used in ecotoxicology tests can be unrepresentative of the populations that are likely to be exposed to the compound in the environment. Most often the tests are on single compound toxicity but mixture effects may be significant and should be included in ecotoxicology testing. This work investigates the use, measured environmental concentrations (MECs) and potential impact of sea lice treatments on salmon farms in Scotland. Alternative methods for ecotoxicology testing including mixture toxicity, and the use of in silico techniques to predict the chronic impact of VMs on different species of aquatic organisms were also investigated. The Scottish Environmental Protection Agency (SEPA) provided information on the use of five sea lice treatments from 2008-2011 on Scottish salmon farms. This information was combined with the recently available data on sediment MECs for the years 2009-2012 provided by SEPA using ArcGIS 10.1. In depth analysis of this data showed that from a total of 55 sites, 30 sites had a MEC higher than the maximum allowable concentration (MAC) as set out by SEPA for emamectin benzoate and 7 sites had a higher MEC than MAC for teflubenzuron. A number of sites that were up to 16 km away from the nearest salmon farm reported as using either emamectin benzoate or teflubenzuron measured positive for the two treatments. There was no relationship between current direction and the distribution of the sea lice treatments, nor was there any evidence for alternative sources of the compounds e.g. land treatments. The sites that had MECs higher than the MAC could pose a risk to non-target organisms and disrupt the species dynamics of the area. There was evidence that some marine protected sites might be at risk of exposure to these compounds. To complement this work, effects on acute mixture toxicity of the 5 sea lice treatments, plus one major metabolite 3-phenoxybenzoic acid (3PBA), were measured using an assay using the bioluminescent bacteria Aliivibrio fischeri. When exposed to the 5 sea lice treatments and 3PBA A. fischeri showed a response to 3PBA, emamectin benzoate and azamethiphos as well as combinations of the three. In order to establish any additive effect of the sea lice treatments, the efficacy of two mixture prediction equations, concentration addition (CA) and independent action ii(IA) were tested using the results from single compound dose response curves. In this instance IA was the more effective prediction method with a linear regression confidence interval of 82.6% compared with 22.6% of CA. In silico molecular docking was carried out to predict the chronic effects of 15 VMs (including the five used as sea lice control). Molecular docking has been proposed as an alternative screening method for the chronic effects of large animal treatments on non-target organisms. Oestrogen receptor alpha (ERα) of 7 non-target bony fish and the African clawed frog Xenopus laevis were modelled using SwissModel. These models were then ‘docked’ to oestradiol, the synthetic oestrogen ethinylestradiol, two known xenoestrogens dichlorodiphenyltrichloroethane (DDT) and bisphenol A (BPA), the antioestrogen breast cancer treatment tamoxifen and 15 VMs using Auto Dock 4. Based on the results of this work, four VMs were identified as being possible xenoestrogens or anti-oestrogens; these were cypermethrin, deltamethrin, fenbendazole and teflubenzuron. Further investigation, using in vitro assays, into these four VMs has been suggested as future work. A modified recombinant yeast oestrogen screen (YES) was attempted using the cDNA of the ERα of the zebrafish Danio rerio and the rainbow trout Oncorhynchus mykiss. Due to time and difficulties in cloning protocols this work was unable to be completed. Use of such in vitro assays would allow for further investigation of the highlighted VMs into their oestrogenic potential. In conclusion, VMs used as sea lice treatments, such as teflubenzuron and emamectin benzoate may be more persistent and have a wider range in the environment than previously thought. Mixtures of sea lice treatments have been found to persist together in the environment, and effects of these mixtures on the bacteria A. fischeri can be predicted using the IA equation. Finally, molecular docking may be a suitable tool to predict chronic endocrine disrupting effects and identify varying degrees of impact on the ERα of nine species of aquatic organisms.

Field investigation of contactless displacement measurement using computer vision systems for civil engineering applications

Much of the bridge stock on major transport links in North America and Europe was constructed in the 1950s and 1960s and has since deteriorated or is carrying loads far in excess of the original design loads. Structural Health Monitoring Systems (SHM) can provide valuable information on the bridge capacity but the application of such systems is currently limited by access and bridge type. This paper investigates the use of computer vision systems for SHM. A series of field tests have been carried out to test the accuracy of displacement measurements using contactless methods. A video image of each test was processed using a modified version of the optical flow tracking method to track displacement. These results have been validated with an established measurement method using linear variable differential transformers (LVDTs). The results obtained from the algorithm provided an accurate comparison with the validation measurements. The calculated displacements agree within 2% of the verified LVDT measurements, a number of post processing methods were then applied to attempt to reduce this error.