An introduction to the Chinese Evaluation Standard for the indoor thermal environment

Designing for indoor thermal environmental conditions is one of the key elements in the energy efficient building design process. This paper introduces a development of the Chinese national Evaluation Standard for indoor thermal environments (Evaluation Standard). International standards including the ASHRAE55, ISO7730, DIN EN, and CIBSE Guide-A have been reviewed and referenced for the development of the Evaluation Standard. In addition, over 28,000 subjects participated in the field study from different climate zones in China and over 500 subjects have been involved in laboratory studies. The research findings reveal that there is a need to update the Chinese thermal comfort standard based on local climates and people's habitats. This paper introduces in detail the requirements for the thermal environment for heated and cooled buildings and free-running buildings in China.

Identifying behavioural predictors of small power electricity consumption in office buildings

It is widely accepted that there is a gap between design energy and real world operational energy consumption. The behaviour of occupants is often cited as an important factor influencing building energy performance. However, its consideration, both during design and operation, is overly simplistic, often assuming a direct link between attitudes and behaviour. Alternative models of decision making from psychology highlight a range of additional influential factors and emphasise that occupants do not always act in a rational manner. Developing a better understanding of occupant decision making could help inform office energy conservation campaigns as well as models of behaviour employed during the design process. This paper assesses the contribution of various behavioural constructs on small power consumption in offices. The method is based upon the Theory of Planned Behaviour (TPB) which assumes that intention is driven by three factors: attitude, subjective norms, and perceived behavioural control, but we also consider a fourth construct: habit measured through the Self- Report Habit Index (SRHI). A questionnaire was issued to 81 participants in two UK offices. Questionnaire results for each behavioural construct were correlated against each participant’s individual workstation electricity consumption. The intentional processes proposed by TPB could not account for the observed differences in occupants’ interactions with small power appliances. Instead, occupants were interacting with small power “automatically”, with habit accounting for 11% of the variation in workstation energy consumption. The implications for occupant behaviour models and employee engagement campaigns are discussed.

Designing care bundle documentation to support the recognition and treatment of acute kidney injury: a route to quality improvement

The chapter describes development of care bundle documentation, through an iterative, user-centred design process, to support the recognition and treatment of acute kidney injury (AKI). The chapter details stages of user and stakeholder consultation, employed to develop a design response that was sensitive to user experience and need, culminating in simulation testing of a near final prototype. The development of supplementary awareness-raising materials, relating to the main care bundle tool is also discussed. This information design response to a complex clinical decision-making process is contrasted to other approaches to promoting AKI care. The need for different but related approaches to the working tool itself and the tool’s communication are discussed. More general recommendations are made for the development of communication tools to support complex clinical processes.

An introductory perspective to horticulture: plants for people and places

Horticulture is “the first of all the arts and sciences”. This definition indicates both the breadth and depth of the discipline and its early inception as mankind changed from being hunter-gatherers to cultivators. Intensive crop production which is a form of horticulture preceded more extensive agricultural practices. From that time onwards the intricate involvement of horticulture in man’s life has become very apparent by its multitude of applications and the interests of those involved. These extend from the provision of foodstuffs and nutritional benefits through pharmaceuticals to aspects of rest and relaxation onto encouraging physical and mental well-being. Horticulture is therefore, a discipline with many components and as such that it can mean different things in the varying context of its use. This chapter introduces the meanings of horticulture as expressed by the authors who have contributed to this Trilogy of Books. They have analysed in considerable depth “Horticulture” as expressed in its facets of production, environment and society. Horticulture has impact and expression in each of these fields of human activity. This chapter also sets Horticulture into the wider context of the world of plants and their intensive cultivation both in their use by mankind and in the natural world. The aim is to demonstrate the depth and breadth of human activity associated with this discipline for it stretches from crop production, through landscape design and maintenance and into aspects of society and its expression in the arts and humanities. Horticulture touches almost every aspect of human activity. Increasingly Horticulture has significant importance in contributing towards the mitigation of the major problems which now face life on Earth such as:- climate change, food security, the loss of natural biodiversity, pollution, resource erosion and over-population. Indeed despite or perhaps because of its antiquity and therefore its strong connection between science, technology and practice horticulture can offer solutions that might allude other disciplines.

Energy savings in buildings or UHI mitigation? Comparison between green roofs and cool roofs

The intensification of the Urban Heat Island effect (UHI) is a problem that involves several fields, and new adequate solutions are required to mitigate its amplitude. The construction sector is strictly related with this phenomenon; in particular, roofs are the envelope components subject to the highest solar irradiance, hence any mitigation strategy should start from them and involve their appropriate design process. For this purpose, cool materials, i.e. materials which are able to reflect a large amount of solar radiation and avoid overheating of building surfaces have been deeply analyzed in the last years both at building and urban scales, showing their benefits especially in hot climates. However, green roofs also represent a possible way to cope with UHI, even if their design is not straightforward and requires taking into account many variables, strictly related with the local climatic conditions. In this context, the present paper proposes a comparison between cool roofs and green roofs for several Italian cities that are representative of different climatic conditions. In search of the most effective solution, the answers may be different depending on the perspective that leads the comparison, i.e. the need to reduce the energy consumption in buildings or the desire to minimize the contribution of the UHI effect.

Grafisk profil till ett företag som tillverkar handgjorda textilprodukter av naturmaterial : Hur kan en hemsida kommunicera ett varumärke?

Målet med detta examensarbete var att skapa en grafisk profil till företaget Lyst Form AB som bedriver större delen av sin affärsverksamhet via en hemsida. Företaget säljer handgjorda kläder och accessoarer i lintyg. En teoretisk del i arbetet tar upp hur varumärket kan kommuniceras genom hemsidan. Den grafiska profilen utformades utifrån företagets identitet. Det är viktigt att företaget speglas på ett korrekt sätt. Ett företags identitet kan beskrivas som organisationens själ och den visas utåt i form av bland annat den grafiska profilen. Denna ses därför som en viktig identitetsbärare och den kan kallas för den visuella identiteten. En grafisk profil innehåller bland annat logotyp, profilfärger samt typografi. Företagets målgrupp ansågs vara en viktig del i hela processen eftersom de i slutändan ska tilltalas av den grafiska profilen. Först gjordes en grundlig undersökning och research av företaget för att få en god uppfattning av dess identitet. Även konkurrenterna granskades. En enkätundersökning gjordes för att kunna samla information utifrån målgruppens perspektiv. Denna informationsinsamling gav ett bra underlag och en riktlinje i framtagningen av den grafiska profilen.   Under designprocessens gång diskuterades de logotypförslag som togs fram med hjälp av en sammansatt fokusgrupp. Diskussionen var givande och var till stor nytta i designprocessen. Baserat på den grafiska profilen skapades en layout för hemsidan samt exempel på trycksaker för att visa hur den kan användas. En enklare grafisk manual skapades för att företaget ska kunna synas utåt på ett enhetligt sätt. En sista enkätundersökning gjordes för att se om målet uppnåtts. Resultatet visade att den nya framtagna grafiska profilen var en klar förbättring jämfört mot den nuvarande sett utifrån företagets identitet. I slutändan valde dock företaget en annan logotyp. Detta påvisar svårigheterna i processen att ta fram en grafisk profil. Alla delar i processen är viktiga och undersökningarna är bland annat en av de väsentliga delarna vilka bidrar med en större chans till ett bra slutresultat som tar hänsyn till både företagets och målgruppens åsikter.  

Softproof och färghantering i designprocessen : Från skärm till tryck

Målet med detta examensarbete har varit att ge en överblick över de parametrar som påverkar möjligheten att upprätta ett färghanterat arbetsflöde. Ett färghanterat arbetsflöde ger möjlighet att förutsäga färgåtergivningen i trycksaker via softproof – skärmkorrektur. Examensarbetet belyser de problem och fallgropar som finns i arbetsflödet och hur de kan påverka relevansen för en bedömning av tryckresultat via softproof. Examensarbetet behandlar hur färgåtergivningen påverkas av betraktningsljus och omgivningsljus samt vikten av att arbeta med en kalibrerad bildskärm – en förutsättning för att kunna utföra en färgriktig softproof. Som utgångspunkt för examensarbetet har arbetsflödet på fyra företag i branschen använts och hur väl de uppfyller gällande standarder, ISO 3664 och ISO 12646. Genom ett visuellt test som utarbetats inom examensarbetet har arbetsmiljöns påverkan på färgseendet kunnat påvisas. Testet kan ge en vägledning om hur avvikelser från ISO 3664 och ISO 12646 i arbetsmiljön påverkar bedömningen av färger vid softproof och provtryck.

The Graphic Designer as (a)Digital Nomad : A qualitative study

Syftet med denna studie var att undersöka hur digitala nomader utövar sitt yrke som grafiska designers, varför de valde att bli digitala nomader samt vilka fördelar och nackdelar som finns. Totalt intervjuades 10 före detta och nuvarande digitala nomader via email och svaren sammanställdes och analyserades för att finna teman och sammanhang. Resultatet visar att deltagarna valde en digital nomadisk livsstil främst på grund av den frihet det innebär. De är även helt beroende av internet, då det är den grundläggande teknologin som möjliggör distansarbete. Att vara digital nomad verkar inte ha en negativ inverkan på den grafiska designprocessen och alla verktyg som behövs anser de finns tillgängliga digitalt. Den del av det traditionella designyrket på en byrå som deltagarna i studien saknade mest var kreativa diskussioner med kollegor.

Shared-decision making in designing new healthcare environments : ready to take off for improved quality

Background Successful implementation of new methods and models of healthcare to achieve better patient outcomes and safe, person-centered care is dependent on the physical environment of the healthcare architecture in which the healthcare is provided. Thus, decisions concerning healthcare architecture are critical because it affects people and work processes for many years and requires a long-term financial commitment from society. In this paper, we describe and suggest several strategies (critical factors) to promote shared-decision making when planning and designing new healthcare environments. Discussion This paper discusses challenges and hindrances observed in the literature and from the authors extensive experiences in the field of planning and designing healthcare environments. An overview is presented of the challenges and new approaches for a process that involves the mutual exchange of knowledge among various stakeholders. Additionally, design approaches that balance the influence of specific and local requirements with general knowledge and evidence that should be encouraged are discussed. Summary We suggest a shared-decision making and collaborative planning and design process between representatives from healthcare, construction sector and architecture based on evidence and end-users’ perspectives. If carefully and systematically applied, this approach will support and develop a framework for creating high quality healthcare environments.

Learning in organizations : complexities and diversities

Learning in Organizations focuses on the issues of diversity in the context of organizational learning. It examines those diversities present in organizations among learners and contexts both within and between organizations. In order for learning to be effective and efficient these diversities must be acknowledged and addressed in the learning design process.

Innovation in construction : experiences from a hypocaust system in Australia

Introducing new technologies poses a particular challenge to the players involved in a project. For a successful low energy building, a new design process is required and players must assume new and additional responsibilities. Hypocaust systems, where conditioned or non-conditioned air is passed through ducts within the concrete floor or ceiling of a building prior to its delivery to the rooms, are starting to appear in new buildings in Australia. This paper describes the lessons learned from the early experiences with a hypocaust system, installed in a new building in Melbourne. It concludes that a more cooperative process among all those involved in introducing and using a new 'technology' is essential if the problems described are to be avoided or at least minimized.

Hybrid life-cycle inventory for road construction and use

Life-cycle assessment (LCA) is a technique that is used worldwide by clients and their design team to assess the impact of
their projects on the environment. The main advantage of LCA is in supporting decision making with quantitative data. LCA inventories
can be either fully developed or streamlined. Fully developed LCAs are time-consuming and costly to prepare. Streamlined LCAs can be
used as an effective decision-making tool when considering environmental performance during the design process, but with a loss of
inventory completeness. Acknowledging the advantages and disadvantages of both types of LCA, this paper proposes a hybrid LCA
method that uses input-output data to fill in those gaps routinely left in conventional LCA inventories.

Digital alchemy : two experiments in form processing

Programmatic form-finding and the visual analysis of creative works (architecture, sound, sculpture, painting, music or dance) can be combined to develop “alchemical” processes for the computational exploration of form. This paper reports two project-based form exploration experiments using such a process. The first experiment develops a process for capturing, manipulating and generating form based on a piece of dance choreography. The second experiment explores the decompression of space and architectural elements encoded within the Duchamp painting “Nude descending a staircase”. A discussion for incorporating programmatic strategies and for developing an innovative approach to conceptual form processing based on the language of geometry is presented.

Ecologically sustainable development and architecture: the impact of rating tools

The concept of Ecologically Sustainable Development (ESD) has become an important issue – albeit often scarcely applied – in the design of commercial buildings. To encourage the adoption of sustainable strategies in the practice of design and to address the environmental problems caused by these developments, governments and organisations of various countries have proposed the adoption of scorecard rating tools to inform designers of the impact of their decisions and to present a way of establishing project goals and objectives early in the design process. In Australia, the recent introduction of the Green Star Rating Tool (Office Design) is believed to provide the architects with a ‘whole-of-building’ assessment of the environmental impact of their design by creating a checklist against which to benchmark performance. This paper follows the design of a commercial building, evaluating the impact of Green Star in the overall process. The results of the study suggest the need to include the use of scorecard rating tools in a more integrated model, where ESD is considered at every stage of design and construction rather than being a separate component applied only to promote the ‘greenness’ of a building. Rating tools can be an asset to the design team, provided sustainable requirements are reinforced throughout the entire process.

Towards a digital representation of physical phenomena to assess comfort in future environments

This paper presents the concept and a test implementation of a digital representation of the physical world designed to assess comfort quality in
future environments. An integrated set of physical phenomena is modeled three-dimensionally to investigate the dynamic behavior of design objects
holistically.

The formulation supports the integration of computational simulation in the performance-based design process. It employs the principles of
geometrical and physical selfcontainedness to avoid that complex geometrical and physical circumstances have to be specified at design time. The concepts of congeneric cells and congeneric conjunctions are
introduced to simulate various physical phenomena simultaneously with a uniformly structured set of equations.

The concept, the prototype implementation and selected test cases are presented. Although it was not possible to implement all features and model parts completely, the research and the discussion of its achievements make valuable contributions towards more effective integration of computational simulation in the performance-based design process.