Impacts of traditional husbandry practices on exploitable levels of genetic diversity in cultured 'Tra' catfish (Pangasianodon hypophthalmus) in the Mekong Delta, Vietnam

Sutchi catfish (Pangasianodon hypophthalmus) – known more universally by the Vietnamese name ‘Tra’ is an economically important freshwater fish in the Mekong Delta in Vietnam that constitutes an important food resource. Artificial propagation technology for Tra catfish has only recently been developed along the main branches of the Mekong River where more than 60% of the local human population participate in fishing or aquaculture. Extensive support for catfish culture in general, and that of Tra (P. hypophthalmus) in particular, has been provided by the Vietnamese government to increase both the scale of production and to develop international export markets. In 2006, total Vietnamese catfish exports reached approximately 286,602 metric tons (MT) and were valued at 736.87 $M with a number of large new export destinations being developed. Total value of production from catfish culture has been predicted to increase to approximately USD 1 billion by 2020. While freshwater catfish culture in Vietnam has a promising future, concerns have been raised about long-term quality of fry and the effectiveness of current brood stock management practices, issues that have been largely neglected to date. In this study, four DNA markers (microsatellite loci: CB4, CB7, CB12 and CB13) that were developed specifically for Tra (P. hypophthalmus) in an earlier study were applied to examine the genetic quality of artificially propagated Tra fry in the Mekong Delta in Vietnam. The goals of the study were to assess: (i) how well available levels of genetic variation in Tra brood stock used for artificial propagation in the Mekong Delta of Vietnam (breeders from three private hatcheries and Research Institute of Aquaculture No2 (RIA2) founders) has been conserved; and (ii) whether or not genetic diversity had declined significantly over time in a stock improvement program for Tra catfish at RIA2. A secondary issue addressed was how genetic markers could best be used to assist industry development. DNA was extracted from fins of catfish collected from the two main branches of the Mekong River inf Vietnam, three private hatcheries and samples from the Tra improvement program at RIA2. Study outcomes: i) Genetic diversity estimates for Tra brood stock samples were similar to, and slightly higher than, wild reference samples. In addition, the relative contribution by breeders to fry in commercial private hatcheries strongly suggest that the true Ne is likely to be significantly less than the breeder numbers used; ii) in a stock improvement program for Tra catfish at RIA2, no significant differences were detected in gene frequencies among generations (FST=0.021, P=0.036>0.002 after Bonferroni correction); and only small differences were observed in alleles frequencies among sample populations. To date, genetic markers have not been applied in the Tra catfish industry, but in the current project they were used to evaluate the levels of genetic variation in the Tra catfish selective breeding program at RIA2 and to undertake genetic correlations between genetic marker and trait variation. While no associations were detected using only four loci, they analysis provided training in the practical applications of the use of molecular markers in aquaculture in general, and in Tra culture, in particular.

Ethical decision making and health care managers : developing managerial profiles based on ethical frameworks and other influencing factors

Whether the community is looking for “scapegoats” to blame, or seeking more radical and deeper causes, health care managers are in the firing line whenever there are woes in the health care sector. The public has a right to question whether ethics have much influence on the everyday decision making of health care managers. This thesis explores, through a series of published papers, the influence of ethics and other factors on the decision making of health care managers in Australia. Critical review of over 40 years of research on ethical decision making has revealed a large number of influencing factors, but there is a demonstrable lack of a multidimensional approach that measures the combined influences of these factors on managers. This thesis has developed an instrument, the Managerial Ethical Profile (MEP) scale, based on a multidimensional model combining a large number of influencing factors. The MEP scale measures the range of influences on individual managers, and describes the major tendencies by developing a number of empirical profiles derived from a hierarchical cluster analysis. The instrument was developed and refined through a process of pilot studies on academics and students (n=41) and small-business managers (n=41), and then was administered to the larger sample of health care managers (n=441). Results from this study indicate that Australian health care managers draw on a range of ethical frameworks in their everyday decision making, forming the basis of five MEPs (Knights, Guardian Angels, Duty Followers, Defenders, and Chameleons). Results from the study also indicate that the range of individual, organisational, and external factors that influence decision making can be grouped into three major clusters or functions. Cross referencing these functions and other demographic data to the MEPs provides analytical insight into the characteristics of the MEPs. These five profiles summarise existing strengths and weaknesses in managerial ethical decision making. Therefore identifying these profiles not only can contribute to increasing organisational knowledge and self-awareness, but also has clear implications for the design and implementation of ethics education and training in large scale organisations in the health care industry.

Performance control of distributed generation using digital estimation of signal parameters

The Queensland University of Technology (QUT) allows the presentation of a thesis for the Degree of Doctor of Philosophy in the format of published or submitted papers, where such papers have been published, accepted or submitted during the period of candidature. This thesis is composed of seven published/submitted papers, of which one has been published, three accepted for publication and the other three are under review. This project is financially supported by an Australian Research Council (ARC) Discovery Grant with the aim of proposing strategies for the performance control of Distributed Generation (DG) system with digital estimation of power system signal parameters. Distributed Generation (DG) has been recently introduced as a new concept for the generation of power and the enhancement of conventionally produced electricity. Global warming issue calls for renewable energy resources in electricity production. Distributed generation based on solar energy (photovoltaic and solar thermal), wind, biomass, mini-hydro along with use of fuel cell and micro turbine will gain substantial momentum in the near future. Technically, DG can be a viable solution for the issue of the integration of renewable or non-conventional energy resources. Basically, DG sources can be connected to local power system through power electronic devices, i.e. inverters or ac-ac converters. The interconnection of DG systems to power system as a compensator or a power source with high quality performance is the main aim of this study. Source and load unbalance, load non-linearity, interharmonic distortion, supply voltage distortion, distortion at the point of common coupling in weak source cases, source current power factor, and synchronism of generated currents or voltages are the issues of concern. The interconnection of DG sources shall be carried out by using power electronics switching devices that inject high frequency components rather than the desired current. Also, noise and harmonic distortions can impact the performance of the control strategies. To be able to mitigate the negative effect of high frequency and harmonic as well as noise distortion to achieve satisfactory performance of DG systems, new methods of signal parameter estimation have been proposed in this thesis. These methods are based on processing the digital samples of power system signals. Thus, proposing advanced techniques for the digital estimation of signal parameters and methods for the generation of DG reference currents using the estimates provided is the targeted scope of this thesis. An introduction to this research – including a description of the research problem, the literature review and an account of the research progress linking the research papers – is presented in Chapter 1. One of the main parameters of a power system signal is its frequency. Phasor Measurement (PM) technique is one of the renowned and advanced techniques used for the estimation of power system frequency. Chapter 2 focuses on an in-depth analysis conducted on the PM technique to reveal its strengths and drawbacks. The analysis will be followed by a new technique proposed to enhance the speed of the PM technique while the input signal is free of even-order harmonics. The other techniques proposed in this thesis as the novel ones will be compared with the PM technique comprehensively studied in Chapter 2. An algorithm based on the concept of Kalman filtering is proposed in Chapter 3. The algorithm is intended to estimate signal parameters like amplitude, frequency and phase angle in the online mode. The Kalman filter is modified to operate on the output signal of a Finite Impulse Response (FIR) filter designed by a plain summation. The frequency estimation unit is independent from the Kalman filter and uses the samples refined by the FIR filter. The frequency estimated is given to the Kalman filter to be used in building the transition matrices. The initial settings for the modified Kalman filter are obtained through a trial and error exercise. Another algorithm again based on the concept of Kalman filtering is proposed in Chapter 4 for the estimation of signal parameters. The Kalman filter is also modified to operate on the output signal of the same FIR filter explained above. Nevertheless, the frequency estimation unit, unlike the one proposed in Chapter 3, is not segregated and it interacts with the Kalman filter. The frequency estimated is given to the Kalman filter and other parameters such as the amplitudes and phase angles estimated by the Kalman filter is taken to the frequency estimation unit. Chapter 5 proposes another algorithm based on the concept of Kalman filtering. This time, the state parameters are obtained through matrix arrangements where the noise level is reduced on the sample vector. The purified state vector is used to obtain a new measurement vector for a basic Kalman filter applied. The Kalman filter used has similar structure to a basic Kalman filter except the initial settings are computed through an extensive math-work with regards to the matrix arrangement utilized. Chapter 6 proposes another algorithm based on the concept of Kalman filtering similar to that of Chapter 3. However, this time the initial settings required for the better performance of the modified Kalman filter are calculated instead of being guessed by trial and error exercises. The simulations results for the parameters of signal estimated are enhanced due to the correct settings applied. Moreover, an enhanced Least Error Square (LES) technique is proposed to take on the estimation when a critical transient is detected in the input signal. In fact, some large, sudden changes in the parameters of the signal at these critical transients are not very well tracked by Kalman filtering. However, the proposed LES technique is found to be much faster in tracking these changes. Therefore, an appropriate combination of the LES and modified Kalman filtering is proposed in Chapter 6. Also, this time the ability of the proposed algorithm is verified on the real data obtained from a prototype test object. Chapter 7 proposes the other algorithm based on the concept of Kalman filtering similar to those of Chapter 3 and 6. However, this time an optimal digital filter is designed instead of the simple summation FIR filter. New initial settings for the modified Kalman filter are calculated based on the coefficients of the digital filter applied. Also, the ability of the proposed algorithm is verified on the real data obtained from a prototype test object. Chapter 8 uses the estimation algorithm proposed in Chapter 7 for the interconnection scheme of a DG to power network. Robust estimates of the signal amplitudes and phase angles obtained by the estimation approach are used in the reference generation of the compensation scheme. Several simulation tests provided in this chapter show that the proposed scheme can very well handle the source and load unbalance, load non-linearity, interharmonic distortion, supply voltage distortion, and synchronism of generated currents or voltages. The purposed compensation scheme also prevents distortion in voltage at the point of common coupling in weak source cases, balances the source currents, and makes the supply side power factor a desired value.

Towards an automatic system for road lane marking extraction in large-scale aerial images acquired over rural areas by hierarchical image analysis and Gabor filter

An automatic approach to road lane marking extraction from high-resolution aerial images is proposed, which can automatically detect the road surfaces in rural areas based on hierarchical image analysis. The procedure is facilitated by the road centrelines obtained from low-resolution images. The lane markings are further extracted on the generated road surfaces with 2D Gabor filters. The proposed method is applied on the aerial images of the Bruce Highway around Gympie, Queensland. Evaluation of the generated road surfaces and lane markings using four representative test fields has validated the proposed method.

Room ventilation and the risk of airborne infection transmission in three health care settings within a large teaching hospital

Background: Room ventilation is a key determinant of airborne disease transmission. Despite this, ventilation guidelines in hospitals are not founded on robust scientific evidence related to prevention of airborne transmission. Methods: We sought to assess the effect of ventilation rates on influenza, tuberculosis (TB) and rhinovirus infection risk within three distinct rooms in a major urban hospital; a Lung Function Laboratory, Emergency Department (ED) Negative-pressure Isolation Room and an Outpatient Consultation Room were investigated. Air exchange rate measurements were performed in each room using CO2 as a tracer. Gammaitoni and Nucci’s model was employed to estimate infection risk. Results: Current outdoor air exchange rates in the Lung Function Laboratory and ED Isolation Room limited infection risks to between 0.1 and 3.6%. Influenza risk for individuals entering an Outpatient Consultation Room after an infectious individual departed ranged from 3.6 to 20.7%, depending on the duration for which each person occupied the room. Conclusions: Given the absence of definitive ventilation guidelines for hospitals, air exchange measurements combined with modelling afford a useful means of assessing, on a case-by-case basis, the suitability of room ventilation at preventing airborne disease transmission.

Blood cultures for assessment of postoperative fever in arthroplasty patients

Postoperative fever in arthroplasty patients is common. The value of diagnostic workup of fever in this instance is of questionable utility. Studies have shown that blood cultures in this scenario add little to clinical management, but sample sizes have been small and the use of blood cultures in this setting continues. This study aimed to examine the value of blood cultures in the assessment of postoperative fever in a large arthroplasty population. The medical records of 101 patients who had 141 blood culture sets taken during a 2-year period were retrospectively analyzed. Of the 141 blood culture sets, only 2 returned positive results. These were both thought to be as a result of skin contamination at the time of venipuncture. No infectious sequelae occurred in either patient. We conclude that blood cultures have no role to play in the assessment of the febrile, otherwise asymptomatic arthroplasty patient in the early postoperative period.

The impact of completing a drink driving rehabilitation program on future drinking : the clients’ perspective

The paper explores the role and focus of drink driving rehabilitation programs. It is particularly concerned with whether programs that specifically focus on reducing driving after drinking also have a positive effect on clients’ levels of drinking. A sample of volunteering clients was recruited while they were participating in the Australian “Under the Limit” program and they were followed up at least three months post completion. Response rates were very low and the sample is assumed to reflect the views and outcomes of persons who felt positive about the program. Clients reported large and meaningful reductions in their drinking and in their drink driving. They also reported important moves towards action and change in their drinking habits. The findings deserve to be followed up given the fact that drink driving programs are generally of much shorter duration than alcohol focussed interventions. There is a need for further research in this area and for developing more effective recruitment strategies.

Evaluating automatic road detection across a large aerial imagery collection

The automated extraction of roads from aerial imagery can be of value for tasks including mapping, surveillance and change detection. Unfortunately, there are no public databases or standard evaluation protocols for evaluating these techniques. Many techniques are further hindered by a reliance on manual initialisation, making large scale application of the techniques impractical. In this paper, we present a public database and evaluation protocol for the evaluation of road extraction algorithms, and propose an improved automatic seed finding technique to initialise road extraction, based on a combination of geometric and colour features.

Building information modeling in the Australian architecture engineering and construction industry

Building Information Modeling (BIM) is a modern approach to the design, documentation, delivery, and life cycle management of buildings through the use of project information databases coupled with object-based parametric modeling. BIM has the potential to revolutionize the Architecture, Engineering and Construction (AEC) industry in terms of the positive impact it may have on information flows, working relationships between project participants from different disciplines and the resulting benefits it may achieve through improvements to conventional methods. This chapter reviews the development of BIM, the extent to which BIM has been implemented in Australia, and the factors which have affected the up-take of BIM. More specifically, the objectives of this chapter are to investigate the adoption of BIM in the Australian AEC industry and factors that contribute towards the uptake (or non uptake) of BIM. These objectives are met by a review of the related literature in the first instance, followed by the presentation of the results of a 2007 postal questionnaire survey and telephone interviews of a random sample of professionals in the Australian AEC industry. The responses suggest that less than 25 percent of the sample had been involved in BIM – rather less than might be expected from reading the literature. Also, of those who have been involved with BIM, there has been very little interdisciplinary collaboration. The main barriers impeding the implementation of BIM widely across the Australian AEC industry are also identified. These were found to be primarily a lack of BIM expertise, lack of awareness and resistance to change. The benefits experienced as a result of using BIM are also discussed. These include improved design consistency, better coordination, cost savings, higher quality work, greater productivity and increased speed of delivery. In terms of conclusion, some suggestions are made concerning the underlying practical reasons for the slow up-take of BIM and the successes for those early adopters. Prospects for future improvement are discussed and proposals are also made for a large scale worldwide comparative study covering industry-wide participants

Quantitative approaches to content analysis : identifying conceptual drift across publication outlets

Unstructured text data, such as emails, blogs, contracts, academic publications, organizational documents, transcribed interviews, and even tweets, are important sources of data in Information Systems research. Various forms of qualitative analysis of the content of these data exist and have revealed important insights. Yet, to date, these analyses have been hampered by limitations of human coding of large data sets, and by bias due to human interpretation. In this paper, we compare and combine two quantitative analysis techniques to demonstrate the capabilities of computational analysis for content analysis of unstructured text. Specifically, we seek to demonstrate how two quantitative analytic methods, viz., Latent Semantic Analysis and data mining, can aid researchers in revealing core content topic areas in large (or small) data sets, and in visualizing how these concepts evolve, migrate, converge or diverge over time. We exemplify the complementary application of these techniques through an examination of a 25-year sample of abstracts from selected journals in Information Systems, Management, and Accounting disciplines. Through this work, we explore the capabilities of two computational techniques, and show how these techniques can be used to gather insights from a large corpus of unstructured text.

Value co-creation in social marketing wellness services

Customer perceived value is concerned with the experiences of consumers when using a service and is often referred to in the context of service provision or on the basis of service quality (Auh, et al., 2007; Chang, 2008; Jackson, 2007; Laukkanen, 2007; Padgett & Mulvey, 2007; Shamdasani, Mukherjee & Malhotra, 2008). Understanding customer perceived value has benefits for social marketing and allows scholars and practitioners alike to identify why consumers engage in positive social behaviours through the use of services. Understanding consumers’ use of wellness services in particular is important, because the use of wellness services demonstrates the fulfilment of social marketing aims; performing pro-active, positive social behaviours that are of benefit to the individual and to society (Andreasen, 1994). As consumers typically act out of self-interest (Rothschild, 1999), this research posits that a value proposition must be made to consumers in order to encourage behavioural change. Thus, this research seeks to identify how value is created for consumers of wellness services in social marketing. This results in the overall research question of this research: How is value created in social marketing wellness services? A traditional method towards understanding value has been the adoption of an economic approach, which considers the utility gained and where value is a direct outcome of a cost-benefit analysis (Payne & Holt, 1999). However, there has since been a shift towards the adoption of an experiential approach in understanding value. This experiential approach considers the consumption experience of the consumer which extends beyond the service exchange and includes pre- and post-consumption stages (Russell-Bennett, Previte & Zainuddin, 2009). As such, this research uses an experiential approach to identify the value that exists in social marketing wellness services. Four dimensions of value have been commonly conceptualised and identified in the commercial marketing literature; functional, emotional, social, and altruistic value (Holbrook, 1994; Sheth, Newman & Gross, 1991; Sweeney & Soutar, 2001). It is not known if these value dimensions also exist in social marketing. In addition, sources of value said to influence value dimensions have been conceptualised in the literature. Sources of value such as information, interaction, environment, service, customer co-creation, and social mandate have been conceptually identified both in the commercial and social marketing literature (Russell-Bennet, Previte & Zainuddin, 2009; Smith & Colgate, 2007). However, it is not clear which sources of value contribute to the creation of value for users of wellness services. Thus, this research seeks to explore these relationships. This research was conducted using a wellness service context, specifically breast cancer screening services. The primary target consumer of these services is women aged 50 to 69 years old (inclusive) who have never been diagnosed with breast cancer. It is recommended that women in this target group have a breast screen every 2 years in order to achieve the most effective medical outcomes from screening. A two-study mixed method approach was utilised. Study 1 was a qualitative exploratory study that analysed individual-depth interviews with 25 information-rich respondents. The interviews were transcribed verbatim and analysed using NVivo 8 software. The qualitative results provided evidence of the existence of the four value dimensions in social marketing. The results also allowed for the development of a typology of experiential value by synthesising current understanding of the value dimensions, with the activity aspects of experiential value identified by Holbrook (1994) and Mathwick, Malhotra and Rigdon (2001). The qualitative results also provided evidence for the existence of sources of value in social marketing, namely information, interaction, environment and consumer participation. In particular, a categorisation of sources of value was developed as a result of the findings from Study 1, which identify organisational, consumer, and third party sources of value. A proposed model of value co-creation and a set of hypotheses were developed based on the results of Study 1 for further testing in Study 2. Study 2 was a large-scale quantitative confirmatory study that sought to test the proposed model of value co-creation and the hypotheses developed. An online-survey was administered Australia-wide to women in the target audience. A response rate of 20.1% was achieved, resulting in a final sample of 797 useable responses after removing ineligible respondents. Reliability and validity analyses were conducted on the data, followed by Exploratory Factor Analysis (EFA) in PASW18, followed by Confirmatory Factor Analysis (CFA) in AMOS18. Following the preliminary analyses, the data was subject to Structural Equation Modelling (SEM) in AMOS18 to test the path relationships hypothesised in the proposed model of value creation. The SEM output revealed that all hypotheses were supported, with the exception of one relationship which was non-significant. In addition, post hoc tests revealed seven further significant non-hypothesised relationships in the model. The quantitative results show that organisational sources of value as well as consumer participation sources of value influence both functional and emotional dimensions of value. The experience of both functional and emotional value in wellness services leads to satisfaction with the experience, followed by behavioural intentions to perform the behaviour and use the service again. One of the significant non-hypothesised relationships revealed that emotional value leads to functional value in wellness services, providing further empirical evidence that emotional value features more prominently than functional value for users of wellness services. This research offers several contributions to theory and practice. Theoretically, this research addresses a gap in the literature by using social marketing theory to provide an alternative method of understanding individual behaviour in a domain that has been predominantly investigated in public health. This research also clarifies the concept of value and offers empirical evidence to show that value is a multi-dimensional construct with separate and distinct dimensions. Empirical evidence for a typology of experiential value, as well as a categorisation of sources of value is also provided. In its practical contributions, this research identifies a framework that is the value creation process and offers health services organisations a diagnostic tool to identify aspects of the service process that facilitate the value creation process.

Tissue engineering bone - reconstruction of critical sized segmental bone defects in a large animal model

Currently, well established clinical therapeutic approaches for bone reconstruction are restricted to the transplantation of autografts and allografts, and the implantation of metal devices or ceramic-based implants to assist bone regeneration. Bone grafts possess osteoconductive and osteoinductive properties, their application, however, is associated with disadvantages. These include limited access and availability, donor site morbidity and haemorrhage, increased risk of infection, and insufficient transplant integration. As a result, recent research focuses on the development of complementary therapeutic concepts. The field of tissue engineering has emerged as an important alternative approach to bone regeneration. Tissue engineering unites aspects of cellular biology, biomechanical engineering, biomaterial sciences and trauma and orthopaedic surgery. To obtain approval by regulatory bodies for these novel therapeutic concepts the level of therapeutic benefit must be demonstrated rigorously in well characterized, clinically relevant animal models. Therefore, in this PhD project, a reproducible and clinically relevant, ovine, critically sized, high load bearing, tibial defect model was established and characterized as a prerequisite to assess the regenerative potential of a novel treatment concept in vivo involving a medical grade polycaprolactone and tricalciumphosphate based composite scaffold and recombinant human bone morphogenetic proteins.

Multifractal characterisation and analysis of complex networks

Complex networks have been studied extensively due to their relevance to many real-world systems such as the world-wide web, the internet, biological and social systems. During the past two decades, studies of such networks in different fields have produced many significant results concerning their structures, topological properties, and dynamics. Three well-known properties of complex networks are scale-free degree distribution, small-world effect and self-similarity. The search for additional meaningful properties and the relationships among these properties is an active area of current research. This thesis investigates a newer aspect of complex networks, namely their multifractality, which is an extension of the concept of selfsimilarity. The first part of the thesis aims to confirm that the study of properties of complex networks can be expanded to a wider field including more complex weighted networks. Those real networks that have been shown to possess the self-similarity property in the existing literature are all unweighted networks. We use the proteinprotein interaction (PPI) networks as a key example to show that their weighted networks inherit the self-similarity from the original unweighted networks. Firstly, we confirm that the random sequential box-covering algorithm is an effective tool to compute the fractal dimension of complex networks. This is demonstrated on the Homo sapiens and E. coli PPI networks as well as their skeletons. Our results verify that the fractal dimension of the skeleton is smaller than that of the original network due to the shortest distance between nodes is larger in the skeleton, hence for a fixed box-size more boxes will be needed to cover the skeleton. Then we adopt the iterative scoring method to generate weighted PPI networks of five species, namely Homo sapiens, E. coli, yeast, C. elegans and Arabidopsis Thaliana. By using the random sequential box-covering algorithm, we calculate the fractal dimensions for both the original unweighted PPI networks and the generated weighted networks. The results show that self-similarity is still present in generated weighted PPI networks. This implication will be useful for our treatment of the networks in the third part of the thesis. The second part of the thesis aims to explore the multifractal behavior of different complex networks. Fractals such as the Cantor set, the Koch curve and the Sierspinski gasket are homogeneous since these fractals consist of a geometrical figure which repeats on an ever-reduced scale. Fractal analysis is a useful method for their study. However, real-world fractals are not homogeneous; there is rarely an identical motif repeated on all scales. Their singularity may vary on different subsets; implying that these objects are multifractal. Multifractal analysis is a useful way to systematically characterize the spatial heterogeneity of both theoretical and experimental fractal patterns. However, the tools for multifractal analysis of objects in Euclidean space are not suitable for complex networks. In this thesis, we propose a new box covering algorithm for multifractal analysis of complex networks. This algorithm is demonstrated in the computation of the generalized fractal dimensions of some theoretical networks, namely scale-free networks, small-world networks, random networks, and a kind of real networks, namely PPI networks of different species. Our main finding is the existence of multifractality in scale-free networks and PPI networks, while the multifractal behaviour is not confirmed for small-world networks and random networks. As another application, we generate gene interactions networks for patients and healthy people using the correlation coefficients between microarrays of different genes. Our results confirm the existence of multifractality in gene interactions networks. This multifractal analysis then provides a potentially useful tool for gene clustering and identification. The third part of the thesis aims to investigate the topological properties of networks constructed from time series. Characterizing complicated dynamics from time series is a fundamental problem of continuing interest in a wide variety of fields. Recent works indicate that complex network theory can be a powerful tool to analyse time series. Many existing methods for transforming time series into complex networks share a common feature: they define the connectivity of a complex network by the mutual proximity of different parts (e.g., individual states, state vectors, or cycles) of a single trajectory. In this thesis, we propose a new method to construct networks of time series: we define nodes by vectors of a certain length in the time series, and weight of edges between any two nodes by the Euclidean distance between the corresponding two vectors. We apply this method to build networks for fractional Brownian motions, whose long-range dependence is characterised by their Hurst exponent. We verify the validity of this method by showing that time series with stronger correlation, hence larger Hurst exponent, tend to have smaller fractal dimension, hence smoother sample paths. We then construct networks via the technique of horizontal visibility graph (HVG), which has been widely used recently. We confirm a known linear relationship between the Hurst exponent of fractional Brownian motion and the fractal dimension of the corresponding HVG network. In the first application, we apply our newly developed box-covering algorithm to calculate the generalized fractal dimensions of the HVG networks of fractional Brownian motions as well as those for binomial cascades and five bacterial genomes. The results confirm the monoscaling of fractional Brownian motion and the multifractality of the rest. As an additional application, we discuss the resilience of networks constructed from time series via two different approaches: visibility graph and horizontal visibility graph. Our finding is that the degree distribution of VG networks of fractional Brownian motions is scale-free (i.e., having a power law) meaning that one needs to destroy a large percentage of nodes before the network collapses into isolated parts; while for HVG networks of fractional Brownian motions, the degree distribution has exponential tails, implying that HVG networks would not survive the same kind of attack.

Managing large collections of business process models - Current techniques and challenges

Nowadays, business process management is an important approach for managing organizations from an operational perspective. As a consequence, it is common to see organizations develop collections of hundreds or even thousands of business process models. Such large collections of process models bring new challenges and provide new opportunities, as the knowledge that they encapsulate requires to be properly managed. Therefore, a variety of techniques for managing large collections of business process models is being developed. The goal of this paper is to provide an overview of the management techniques that currently exist, as well as the open research challenges that they pose.

Using turning technologies to engage tutors and facilitate effective marking and moderation in large classes

Audience Response Systems (ARS) have been successfully used by academics to facilitate student learning and engagement, particularly in large lecture settings. However, in large core subjects a key challenge is not only to engage students, but also to engage large and diverse teaching teams in order to ensure a consistent approach to grading assessments. This paper provides an insight into the ways in which ARS can be used to encourage participation by tutors in marking and moderation meetings. It concludes that ARS can improve the consistency of grading and the quality of feedback provided to students.