A study of inputs and their influence on technological innovative activity

Technological innovation has been widely studied: however surprisingly little is known about the experience of managing the process. Most reports tend to be generalistic and/or prescriptive whereas it is argued that multiple sources of variation in the process limit the value of these. A description of the innovation process is given together with a presentation of what is knovrn from existing studies. Gaps identified in this area suggest that a variety of organisational influences are important and an attempt is made to identify some of these at individual, group and organisational level. A simple system model of the innovation management process is developed. Further investigation of the influence of these factors was made possible through an extended on-site case study. Methodology for this based upon participant observation coupled wth a wide and flexible range of techniques is described. Evidence is presented about many aspects of the innovation process from a number of different levels and perspectives: the attempt is to demonstrate the extent to which variation due to contingent influences takes place. It is argued that problems identified all relate to the issue of integration. This theme is also developed from an analytical viewoint and it is suggested that organisational response to increases in complexity in the external environment will be to match them with internal complexity. Differentiation of this kind will require extensive and flexible integration, especially in those inherently uncertain areas associated with innovation. Whilst traditionally a function of management, it is argued that integration needs have increased to the point where a new specialism is required. The concept of integration specialist is developed from this analysis and attempts at simple integrative change during the research are described. Finally a strategy for integration - or rather for building in integrative capability - ln the organisation studied is described.

Simultaneous demultiplexing and clock recovery using a single electroabsorption modulator in a novel bi-directional configuration

A single electroabsorption modulator was used to demultiplex a 10 Gbit/s channel from a 40 Gbit/s OTDM data stream, whilst simultaneously recovering the 10 GHz electrical clock. This was achieved using a new bi-directional operation of the EA modulator, combined with a simple phase-locked loop feedback circuit. Excellent system performance was achieved, indicating that operation up to and beyond 100 Gbit/s is possible using current technology.

Faces of pricing and profit planning at the doorstep of the EU: government pricing policy in the innovative pharmaceutical sector in Turkey

The majority of research on the pharmaceutical sector has focused on an overall micro economic, medical oriented welfare issues, whereas the marketing management role of the innovative drug manufacturer has to a large extent been disregarded. Using the case of Turkey, through a series of in-depth interviews with highly innovative companies, other marketing management possibilities to develop pricing strategies and plan for profit are explored based on broader definitions of value and transparency. Our results suggest that pharmaceutical companies as well as governments might have a too narrow focus of value and underestimate the potential long term benefits of a broader approach to marketing management and long term relationships between the various stakeholders.

Twelve steps to heaven:successfully managing change through developing innovative teams

In this article we propose that work teams implement many of the innovative changes required to enable organizations to respond appropriately to the external environment. We describe how, using an input?–?process?–?output model, we can identify the key elements necessary for developing team innovation. We propose that it is the implementation of ideas rather than their development that is crucial for enabling organizational change. Drawing on theory and relevant research, 12 steps to developing innovative teams are described covering key aspects of the team task, team composition, organizational context, and team processes.

A configuration framework of manufacturing strategy paradigm in state owned enterprises within China's petrochemical industry:building context-embedded configurations for the paradigm of strategic manufacturing management from exploratory case studies

The role of the production system as a key determinant of competitive performance of business operations- has long been the subject of industrial organization research, even predating the .explicit conceptua1isation of manufacturing, strategy in the literature. Particular emergent production issues such as the globalisation of production, global supply chain management, management of integrated manufacturing and a growing e~busjness environment are expected to critically influence the overall competitive performance and therefore the strategic success of the organization. More than ever, there is a critical need to configure and improve production system and operations competence in a strategic way so as to contribute to the long-term competitiveness of the organization. In order to operate competitively and profitably, manufacturing companies, no matter how well managed, all need a long-term 'strategic direction' for the development of operations competence in order to consistently produce more market value with less cost towards a leadership position. As to the long-term competitiveness, it is more important to establish a dynamic 'strategic perspective' for continuous operational improvements in pursuit of this direction, as well as ongoing reviews of the direction in relation to the overall operating context. However, it also clear that the 'existing paradigm of manufacturing strategy development' is incapable of adequately responding to the increasing complexities and variations of contemporary business operations. This has been factually reflected as many manufacturing companies are finding that methodologies advocated in the existing paradigm for developing manufacturing strategy have very limited scale and scope for contextual contingency in empirical application. More importantly, there has also emerged a deficiency in the multidimensional and integrative profile from a theoretical perspective when operationalising the underlying concept of strategic manufacturing management established in the literature. The point of departure for this study was a recognition of such contextual and unitary limitations in the existing paradigm of manufacturing strategy development when applied to contemporary industrial organizations in general, and Chinese State Owned Enterprises (SOEs) in particular. As China gradually becomes integrated into the world economy, the relevance of Western management theory and its paradigm becomes a practical matter as much as a theoretical issue. Since China markedly differs from Western countries in terms of culture, society, and political and economic systems, it presents promising grounds to test and refine existing management theories and paradigms with greater contextual contingency and wider theoretical perspective. Under China's ongoing programmes of SOE reform, there has been an increased recognition that strategy development is the very essence of the management task for managers of manufacturing companies in the same way as it is for their counterparts in Western economies. However, the Western paradigm often displays a rather naive and unitary perspective of the nature of strategic management decision-making, one which largely overlooks context-embedded factors and social/political influences on the development of manufacturing strategy. This thesis studies the successful experiences of developing manufacturing strategy from five high-performing large-scale SOEs within China’s petrochemical industry. China’s petrochemical industry constitutes a basic heavy industrial sector, which has always been a strategic focus for reform and development by the Chinese government. Using a confirmation approach, the study has focused on exploring and conceptualising the empirical paradigm of manufacturing strategy development practiced by management. That is examining the ‘empirical specifics’ and surfacing the ‘managerial perceptions’ of content configuration, context of consideration, and process organization for developing a manufacturing strategy during the practice. The research investigation adopts a qualitative exploratory case study methodology with a semi-structural front-end research design. Data collection follows a longitudinal and multiple-case design and triangulates case evidence from sources including qualitative interviews, direct observation, and a search of documentations and archival records. Data analysis follows an investigative progression from a within-case preliminary interpretation of facts to a cross-case search for patterns through theoretical comparison and analytical generalization. The underlying conceptions in both the literature of manufacturing strategy and related studies in business strategy were used to develop theoretical framework and analytical templates applied during data collection and analysis. The thesis makes both empirical and theoretical contributions to our understanding of 'contemporary management paradigm of manufacturing strategy development'. First, it provides a valuable contextual contingency of the 'subject' using the business setting of China's SOEs in petrochemical industry. This has been unpacked into empirical configurations developed for its context of consideration, its content and process respectively. Of special note, a lean paradigm of business operations and production management discovered at case companies has significant implications as an emerging alternative for high-volume capital intensive state manufacturing in China. Second, it provides a multidimensional and integrative theoretical profile of the 'subject' based upon managerial perspectives conceptualised at case companies when operationalising manufacturing strategy. This has been unpacked into conceptual frameworks developed for its context of consideration, its content constructs, and its process patterns respectively. Notably, a synergies perspective towards the operating context, competitive priorities and competence development of business operations and production management has significant implications for implementing a lean manufacturing paradigm. As a whole, in so doing, the thesis established a theoretical platform for future refinement and development of context-specific methodologies for developing manufacturing strategy.

Innovative measurement methodology in the study of weathering of automotive coatings

An initial aim of this project was to evaluate the conventional techniques used in the analysis of newly prepared environmentally friendly water-borne automotive coatings and compare them with solvent-borne coatings having comparable formulations. The investigation was carried out on microtuned layers as well as on complete automotive multi-layer paint systems. Methods used included the very traditional methods of gloss and hardness and the commonly used photo-oxidation index (from FTIR spectral analysis). All methods enabled the durability to weathering of the automotive coatings to be initially investigated. However, a primary aim of this work was to develop methods for analysing the early stages of chemical and property changes in both the solvent-borne and water-borne coating systems that take place during outdoor natural weathering exposures and under accelerated artificial exposures. This was achieved by using dynamic mechanical analysis (DMA), in both tension mode on the microtomed films (on all depths of the coating systems from the uppermost clear-coat right down to the electron-coat) and bending mode of the full (unmicrotomed) systems, as well as MALDI-Tof analysis on the movement of the stabilisers in the full systems. Changes in glass transition temperature and relative cross-link density were determined after weathering and these were related to changes in the chemistries of the binder systems of the coatings after weathering. Concentration profiles of the UV-stabilisers (UVA and HALS) in the coating systems were analysed as a consequence of migration in the coating systems in separate microtomed layers of the paint samples (depth profiling) after weathering and diffusion co-efficient and solubility parameters were determined for the UV stabilisers in the coating systems. The methods developed were used to determine the various physical and chemical changes that take place during weathering of the different (water-borne and solvent-borne) systems (photoxidation). The solvent-borne formulations showed less changes after weathering (both natural and accelerated) than the corresponding water-borne formulations due to the lower level of cross-links in the binders of the water-borne systems. The silver systems examined were more durable than the blue systems due to the reflecting power of the aluminium and the lower temperature of the silver coatings.

The effectiveness of an innovative intervention aimed at reducing binge drinking among young people:results from a pilot study

Aims: To assess the effectiveness of a digital-story intervention (short videos made by young people) seeking to reduce the prevalence of young people's binge drinking in Caerphilly. Method: A quasi-experimental design was adopted with three intervention sites and one control site providing the sample (mainly aged 1415 years). Three rounds of self-completion questionnaires, completed prior (T1), immediately after (T2) and 6 months after the intervention (T3). Findings: A total of 1031 questionnaires completed across the three time-points. Two-factor ANOVAs revealed a positive effect on knowledge for the intervention sample. The intervention group results showed stable attitudes towards drinking at the three time-points whilst the control group showed increasing positive attitudes towards drunkenness over the same time period. Intentions towards drunkenness were higher in the control group than the intervention group at T2 (ControlT1 Mean 3.37, T2 Mean 3.90; interventionT1 Mean 3.26, T2 Mean 3.29). Intervention participants got drunk on fewer occasions in the last week (mean occasions last week 1.57) compared to control participants (mean occasions last week 2.00), with the difference approaching statistical significance (F 1.90, p 0.07). Conclusions: Promoting negative attitudes towards drunkenness, alongside a greater sense of control and potential regret about drunkenness are likely to be important factors when considering how to change people's intentions to drink. The study shows the potential to reduce the frequency of drinking behaviour when intentions are changed, and provides recommendations for future interventions of this nature. © 2010 Informa UK Ltd.

Heritage and innovative learning approaches:an alternative approach to engineering education

Over recent years, the role of engineering in promoting a sustainable society has received much public attention [1] with particular emphasis given to the need to promote the future prosperity and security of society through the recruitment and education of more engineers [2,3]. From an employment perspective, the Leitch Review [4] suggested that ‘generic’ transferable employability skills development should constitute a more substantial part of university education. This paper argues that the global drivers impacting engineering education [5] correlate strongly to those underpinning the Leitch review, therefore the question of how to promote transferable employability skills within the wider engineering curriculum is increasingly relevant. By exploring the use of heritage in the engineering curriculum as a way to promote learning and engage students, a less familiar approach to study is discussed. This approach moves away from stereotypical notions of the use of information technology as representing the pinnacle of innovation in education. Taking the student experience as its starting point, the paper draws upon the findings of an exploratory study critically analysing the pedagogical value of using heritage in engineering education. It discusses a teaching approach in which engineering students are taken out of their ‘comfort zone’ - away from the classroom, laboratory and computer, to a heritage site some 100 miles away from the university. The primary learning objective underpinning this approach is to develop students’ transferable skills by encouraging them to consider how to apply theoretical concepts to a previously unexplored situation. By reflecting upon students’ perceptions of the value of this approach, and by identifying how heritage may be utilised as an innovative learning and teaching approach in engineering education, this paper makes a notable contribution to current pedagogical debates in the discipline.

Engineering the future! Inspiring student engagement through innovative course and programme design:an empirical approach

An analysis of a bespoke learning and teaching approach developed for use in engineering education

Scale and scope economies and the efficient vertical and horizontal configuration of the water industry:a survey of the literature

This paper surveys the literature on scale and scope economies in the water and sewerage industry. The magnitude of scale and scope economies determines the cost efficient configuration of any industry. In the case of a regulated sector, reliable estimates of these economies are relevant to inform reform proposals that promote vertical (un)bundling and mergers. The empirical evidence allows some general conclusions. First, there is considerable evidence for the existence of vertical scope economies between upstream water production and distribution. Second, there is only mixed evidence on the existence of (dis)economies of scope between water and sewerage activities. Third, economies of scale exist up to certain output level, and diseconomies of scale arise if the company increases its size beyond this level. However, the optimal scale of utilities also appears to vary considerably between countries. Finally, we briefly consider the implications of our findings for water pricing and point to several directions for necessary future empirical research on the measurement of these economies, and explaining their cross country variation.

Institutional environment, innovative entrepreneurial entry and venture capital financing

We analyse the determinants of high growth expectations entrepreneurial entry (HGE) using individual data drawn on working age population, based on the Global Entrepreneurship Monitor (GEM) surveys for the 1998-2004 period. Individual level explanatory variables are combined with country-level factors. Our results suggest that availability of venture capital and intellectual proper rights protection are strong predictors of HGE. In addition, we also find that innovative start-ups are associated with highest growth expectations in countries with extensive supply of venture capital and strongest intellectual property rights. Once we introduce venture capital, we detect no significant effects of other elements of financial systems on high-powered entry.

Reducing dependence on big brother:Higher Education looks for innovative funding opportunities

This paper presents innovative programs that business schools can utilize to reduce dependence on public funds. A review of the literature shows the theoretical and empirical foundation of higher education funding dilemmas. While higher education is moving towards a global ambition, scarcity hinders governments to fully support programs long-term; thus, cost-sharing and cost-shifting measures must occur for higher education to support current programs. In this study, we examine two universities (one U.S. and one U.K.) and provide practical summaries of programs that have provided additional funds. We show that diversity of funding sources is essential for survival of higher education institutions. Market forces require competition to reduce higher education operational costs while providing students and corporate clients an a la carte educational experience.

The relationship between transformational leadership and innovative behaviour in a healthcare context:a team learning versus a cohesion perspective

The purpose of this study was to explore whether the relationship between transformational leadership and innovative behaviour is explained via the mediating role of team learning, or whether instead team cohesion mediates this relationship. Using survey data from 158 professionals within 21 teams in the Dutch healthcare context, we tested by means of hierarchical regression analyses: (a) the relationship between transformational leadership and innovative behaviour; (b) whether team learning or cohesion mediates this relationship; and (c) the relationship between team learning and cohesion, in relation to transformational leadership. Results showed that transformational leadership is positively related to innovative behaviour and that both cohesion and team learning mediate this relationship, with team learning being the strongest mediator. Addressing a neglected area, our study provides evidence to show that managers who enhance team learning are likely to maximise employees' scope for engaging in innovative behaviours. © 2012 Inderscience Enterprises Ltd.

Developing critical understanding in HRM students:using innovative teaching methods to encourage deep approaches to study

Purpose – This paper aims to focus on developing critical understanding in human resource management (HRM) students in Aston Business School, UK. The paper reveals that innovative teaching methods encourage deep approaches to study, an indicator of students reaching their own understanding of material and ideas. This improves student employability and satisfies employer need. Design/methodology/approach – Student response to two second year business modules, matched for high student approval rating, was collected through focus group discussion. One module was taught using EBL and the story method, whilst the other used traditional teaching methods. Transcripts were analysed and compared using the structure of the ASSIST measure. Findings – Critical understanding and transformative learning can be developed through the innovative teaching methods of enquiry-based learning (EBL) and the story method. Research limitations/implications – The limitation is that this is a single case study comparing and contrasting two business modules. The implication is that the study should be replicated and developed in different learning settings, so that there are multiple data sets to confirm the research finding. Practical implications – Future curriculum development, especially in terms of HE, still needs to encourage students and lecturers to understand more about the nature of knowledge and how to learn. The application of EBL and the story method is described in a module case study – “Strategy for Future Leaders”. Originality/value – This is a systematic and comparative study to improve understanding of how students and lecturers learn and of the context in which the learning takes place.

Managing the dynamic configuration of enterprises

Due to environmental changes and business trends such as globalisation, outsourcing and virtualisation, more and more companies get involved in business activities that are outside their direct control. This typically occurs by entering into collaborative relationships and joint ventures with specialised companies in order to fulfil the demands of customers quickly (DiMaggio, 2001). Organisational structures that results from such collaborative relationships and joint ventures are referred to in this paper as enterprises and the management of them known as enterprise management. The authors use the definition of the European Commission (2003) that defines an enterprise as “… an entity, regardless of its legal form … including partnerships or associations regularly engaged in economic activities.” Therefore in its most simple form an enterprise could be a single integrated company. However, findings from this research show that enterprises can also be made up of parts of different companies and the structure of the enterprise is contingent upon a variety of different factors. The success of the enterprise as a collaborative venture depends on the ability of companies to intermediate their internal core competencies into other participating companies’ value streams and simultaneously outsource their own peripheral activities to companies that can perform them quicker, cheaper, and more effectively (Lal et al., 1995). In other words, the peripheral activities of one member-company must be complemented by a core competence of another member-company within an overall enterprise.