874 resultados para Industries, Location of
Hydroclimatic shifts in northeast Thailand during the last two millennia - the record of Lake Pa Kho
Resumo:
The Southeast Asian mainland is located in the central path of the Asian summer monsoon, a region where paleoclimatic data are still sparse. Here we present a multi-proxy (TOC, C/N, δ13C, biogenic silica, and XRF elemental data) study of a 1.5m sediment/peat sequence from Lake Pa Kho, northeast Thailand, which is supported by 20 AMS 14C ages. Hydroclimatic reconstructions for Pa Kho suggest a strengthened summer monsoon between BC 170-AD 370, AD 800-960, and after AD 1450; and a weakening of the summer monsoon between AD 370-800, and AD 1300-1450. Increased run-off and a higher nutrient supply after AD 1700 can be linked to agricultural intensification and land-use changes in the region. This study fills an important gap in data coverage with respect to summer monsoon variability over Southeast Asia during the past 2000 years and enables the mean position of the Intertropical Convergence Zone (ITCZ) to be inferred based on comparisons with other regional studies. Intervals of strengthened/weaker summer monsoon rainfall suggest that the mean position of the ITCZ was located as far north as 35°N between BC 170-AD 370 and AD 800-960, whereas it likely did not reach above 17°N during the drought intervals of AD 370-800 and AD 1300-1450. The spatial pattern of rainfall variation seems to have changed after AD 1450, when the inferred moisture history for Pa Kho indicates a more southerly location of the mean position of the summer ITCZ.
Resumo:
Gas fired generation currently plays an integral support role ensuring security of supply in power systems with high wind power penetrations due to its technical and economic attributes. However, the increase in variable wind power has affected the gas generation output profile and is pushing the boundaries of the design and operating envelope of gas infrastructure. This paper investigates the mutual dependence and interaction between electricity generation and gas systems through the first comprehensive joined-up, multi-vector energy system analysis for Ireland. Key findings reveal the high vulnerability of the Irish power system to outages on the Irish gas system. It has been shown that the economic operation of the power system can be severely impacted by gas infrastructure outages, resulting in an average system marginal price of up to €167/MWh from €67/MWh in the base case. It has also been shown that gas infrastructure outages pose problems for the location of power system reserve provision, with a 150% increase in provision across a power system transmission bottleneck. Wind forecast error was shown to be a significant cause for concern, resulting in large swings in gas demand requiring key gas infrastructure to operate at close to 100% capacity. These findings are thought to increase in prominence as the installation of wind capacity increases towards 2020, placing further stress on both power and gas systems to maintain security of supply.
Resumo:
1. Using data on the spatial distribution of the British avifauna, we address three basic questions about the spatial structure of assemblages: (i) Is there a relationship between species richness (alpha diversity) and spatial turnover of species (beta diversity)? (ii) Do high richness locations have fewer species in common with neighbouring areas than low richness locations?, and (iii) Are any such relationships contingent on spatial scale (resolution or quadrat area), and do they reflect the operation of a particular kind of species-area relationship (SAR)?
2. For all measures of spatial turnover, we found a negative relationship with species richness. This held across all scales, with the exception of turnover measured as beta (sim).
3. Higher richness areas were found to have more species in common with neighbouring areas.
4. The logarithmic SAR fitted better than the power SAR overall, and fitted significantly better in areas with low richness and high turnover.
5. Spatial patterns of both turnover and richness vary with scale. The finest scale richness pattern (10 km) and the coarse scale richness pattern (90 km) are statistically unrelated. The same is true of the turnover patterns.
6. With coarsening scale, locations of the most species-rich quadrats move north. This observed sensitivity of richness 'hotspot' location to spatial scale has implications for conservation biology, e.g. the location of a reserve selected on the basis of maximum richness may change considerably with reserve size or scale of analysis.
7. Average turnover measured using indices declined with coarsening scale, but the average number of species gained or lost between neighbouring quadrats was essentially scale invariant at 10-13 species, despite mean richness rising from 80 to 146 species (across an 81-fold area increase). We show that this kind of scale invariance is consistent with the logarithmic SAR.
Resumo:
Aesthetics of concrete structures is directly related to the quality of their surface finish. The objective of this investigation was to examine the effect of rheological properties of cement-based mortars on the quality of their surface finish. The study was divided into two phases. Firstly, the influence of the mix composition of mortars, viz. the water to cement (w/c) ratio, the sand content and the superplasticiser (SP) dosage on their rheology was evaluated. Secondly, the surface finish quality was characterised and related to the rheology of the studied systems. Rheology of these materials, i.e. the yield value, was measured using a vane viscometer. The quality of the surface finish was assessed by quantification of the surface air voids by analysing digital photographs of the mould finished sample surfaces. It was found that an increase in the w/c ratio and the SP content decreased the yield value, whilst the increase in the sand content had an opposite effect. When the surface quality is concerned, an increase in the yield value was found to increase the total content of the surface air voids and especially those with size smaller than 1 mm in diameter. Moreover, the analysis of the location of the surface air voids along the height of the sample revealed that with the increase in the yield value their concentration was higher in the bottom section of the analysed samples.
Resumo:
Severe refractory asthma poses a substantial burden in terms of healthcare costs but relatively little is known about the factors which drive these costs. This study uses data from the British Thoracic Society Difficult Asthma Registry (n=596) to estimate direct healthcare treatment costs from an National Health Service perspective and examines factors that explain variations in costs. Annual mean treatment costs among severe refractory asthma patients were £2912 (SD £2212) to £4217 (SD £2449). Significant predictors of costs were FEV1% predicted, location of care, maintenance oral corticosteroid treatment and body mass index. Treating individuals with severe refractory asthma presents a substantial cost to the health service.
Resumo:
Cadmium and lead were determined in fruit and vegetable produce (~1300 samples) collected from a field and market basket study of locally grown produce from the South-West of Britain (Devon and Cornwall). These were compared with similarly locally grown produce from the North-East of Britain (Aberdeenshire). The concentrations of cadmium and lead in the market basket produce were compared to the maximum levels (ML) set by the European Union (EU). For cadmium 0.2% of the samples exceeded the ML, and 0.6% of the samples exceeded the ML for lead. The location of cadmium and lead in potatoes was performed using laser ablation ICP-MS. All tested samples exhibited higher lead concentrations, and most exhibited increased concentrations of cadmium in the potato skin compared to the flesh. The concentrations of cadmium and lead found in fruits and vegetables sampled during this study do not increase concern about risk to human health.
Resumo:
Samples of fine-grained channel bed sediment and overbank floodplain deposits were collected along the main channels of the Rivers Aire (and its main tributary, the River Calder) and Swale, in Yorkshire, UK, in order to investigate downstream changes in the storage and deposition of heavy metals (Cr, Cu, Pb, Zn), total P and the sum of selected PCB congeners, and to estimate the total storage of these contaminants within the main channels and floodplains of these river systems. Downstream trends in the contaminant content of the <63 μm fraction of channel bed and floodplain sediment in the study rivers are controlled mainly by the location of the main sources of the contaminants, which varies between rivers. In the Rivers Aire and Calder, the contaminant content of the <63 μm fraction of channel bed and floodplain sediment generally increases in a downstream direction, reflecting the location of the main urban and industrialized areas in the middle and lower parts of the basin. In the River Swale, the concentrations of most of the contaminants examined are approximately constant along the length of the river, due to the relatively unpolluted nature of this river. However, the Pb and Zn content of fine channel bed sediment decreases downstream, due to the location of historic metal mines in the headwaters of this river, and the effect of downstream dilution with uncontaminated sediment. The magnitude and spatial variation of contaminant storage and deposition on channel beds and floodplains are also controlled by the amount of <63 μm sediment stored on the channel bed and deposited on the floodplain during overbank events. Consequently, contaminant deposition and storage are strongly influenced by the surface area of the floodplain and channel bed. Contaminant storage on the channel beds of the study rivers is, therefore, generally greatest in the middle and lower reaches of the rivers, since channel width increases downstream. Comparisons of the estimates of total storage of specific contaminants on the channel beds of the main channel systems of the study rivers with the annual contaminant flux at the catchment outlets indicate that channel storage represents <3% of the outlet flux and is, therefore, of limited importance in regulating that flux. Similar comparisons between the annual deposition flux of specific contaminants to the floodplains of the study rivers and the annual contaminant flux at the catchment outlet, emphasise the potential importance of floodplain deposition as a conveyance loss. In the case of the River Aire the floodplain deposition flux is equivalent to between ca. 2% (PCBs) and 36% (Pb) of the outlet flux. With the exception of PCBs, for which the value is ≅0, the equivalent values for the River Swale range between 18% (P) and 95% (Pb). The study emphasises that knowledge of the fine-grained sediment delivery system operating in a river basin is an essential prerequisite for understanding the transport and storage of sediment-associated contaminants in river systems and that conveyance losses associated with floodplain deposition exert an important control on downstream contaminant fluxes and the fate of such contaminants. © 2003 Elsevier Science Ltd. All rights reserved.
Resumo:
The spatial location of microorganisms in the soil three-dimensional structure with respect to their substrates plays an important role in the persistence and turnover of natural and xenobiotic organic compounds. To study the effect of spatial location on the mineralisation of 14C-2,4-dichlorophenol (2,4-DCP, 0.15 or 0.31 μmol g-1) and 14C-glucose (2.77 μmol g-1), columns packed with autoclaved soil aggregates (2-5 mm) were used. Using a chloride tracer of water movement, the existence of 'immobile' water, which was by-passed by preferentially flowing 'mobile' water, was demonstrated. By manipulation of the soil moisture content, the substrates were putatively placed to these conceptual hydrological domains (immobile and mobile water). Leaching studies revealed that approximately 1.7 (glucose) and 3.4 (2.4-DCP) times the amount of substrate placed in mobile water was recovered in the first 4 fractions of leachate when compared to substrate placed in immobile water. The marked difference in the breakthrough curves was taken as evidence of successful substrate placement. The 2,4-DCP degrading bacterium, Burkholderia sp. RASCc2, was inoculated in mobile water (1.8-5.2 × 107 cells g-1 soil) and parameters (asymptote, time at maximum rate, calculated maximum rate) describing the mineralisation kinetics of 2,4-DCP and glucose previously added to immobile or mobile water domains were compared, For glucose, there was no significant effect (P > 0.1) of substrate placement on any of the mineralisation parameters. However, substrate placement had a significant effect (P < 0.05) on parameters describing 2,4-DCP mineralisation. In particular, 2,4-DCP added in mobile water was mineralised with a greater maximum rate and with a reduced time at maximum rate when compared to 2,4-DCP added to immobile water. The difference in response between the two test substrates may reflect the importance of sorption in controlling the spatial bioavailability of compounds in soil. © 2002 Elsevier Science Ltd. All rights reserved.
Resumo:
BACKGROUND: The free fatty acid receptors (FFAs), including FFA1 (orphan name: GPR40), FFA2 (GPR43) and FFA3 (GPR41) are G protein-coupled receptors (GPCRs) involved in energy and metabolic homeostasis. Understanding the structural basis of ligand binding at FFAs is an essential step toward designing potent and selective small molecule modulators.
RESULTS: We analyse earlier homology models of FFAs in light of the newly published FFA1 crystal structure co-crystallized with TAK-875, an ago-allosteric ligand, focusing on the architecture of the extracellular binding cavity and agonist-receptor interactions. The previous low-resolution homology models of FFAs were helpful in highlighting the location of the ligand binding site and the key residues for ligand anchoring. However, homology models were not accurate in establishing the nature of all ligand-receptor contacts and the precise ligand-binding mode. From analysis of structural models and mutagenesis, it appears that the position of helices 3, 4 and 5 is crucial in ligand docking. The FFA1-based homology models of FFA2 and FFA3 were constructed and used to compare the FFA subtypes. From docking studies we propose an alternative binding mode for orthosteric agonists at FFA1 and FFA2, involving the interhelical space between helices 4 and 5. This binding mode can explain mutagenesis results for residues at positions 4.56 and 5.42. The novel FFAs structural models highlight higher aromaticity of the FFA2 binding cavity and higher hydrophilicity of the FFA3 binding cavity. The role of the residues at the second extracellular loop used in mutagenesis is reanalysed. The third positively-charged residue in the binding cavity of FFAs, located in helix 2, is identified and predicted to coordinate allosteric modulators.
CONCLUSIONS: The novel structural models of FFAs provide information on specific modes of ligand binding at FFA subtypes and new suggestions for mutagenesis and ligand modification, guiding the development of novel orthosteric and allosteric chemical probes to validate the importance of FFAs in metabolic and inflammatory conditions. Using our FFA homology modelling experience, a strategy to model a GPCR, which is phylogenetically distant from GPCRs with the available crystal structures, is discussed.
Resumo:
In this study we investigate the influence of the implementation of multidimensional engagement on students’ academic, social and emotional outcomes in the teaching of Operations and Supply Chain Management (OSCM) modules. Next to the academic and behavioural engagement dimensions, which are traditionally used to engage students in OSCM courses, we also incorporate a cognitive dimension to enhance integral student engagement. Up to know, integral student engagement is not reported in the OSCM literature. Cognitive engagement is based on implementation of summative self- and peer-assessment of weekly assignments. Our investigation is based on action research, conducted in an OSCM module over two consecutive years. We found that, in general, multidimensional engagement results in higher levels of academic performance, development of relationships with academic staff and their peers and emotional satisfaction. These findings are discussed in relation to several contextual factors: nature of the study material, gender, and the home location of students.
Resumo:
Molecular dynamics (MD) simulation was carried out to acquire an in-depth understanding of the flow behaviour of single crystal silicon during nanometric cutting on three principal crystallographic planes and at different cutting temperatures. The key findings were that (i) the substrate material underneath the cutting tool was observed for the first time to experience a rotational flow akin to fluids at all the tested temperatures up to 1200 K. (ii) The degree of flow in terms of vorticity was found higher on the (1 1 1) crystal plane signifying better machinability on this orientation in accord with the current pool of knowledge (iii) an increase in the machining temperature reduces the springback effect and thereby the elastic recovery and (iv) the cutting orientation and the cutting temperature showed significant dependence on the location of the stagnation region in the cutting zone of the substrate.
Resumo:
Many of the bridges currently in use worldwide are approaching the end of their design lives. However, rehabilitating and extending the lives of these structures raises important safety issues. There is also a need for increased monitoring which has considerable cost implications for bridge management systems. Existing structural health monitoring (SHM) techniques include vibration-based approaches which typically involve direct instrumentation of the bridge and are important as they can indicate the deterioration of the bridge condition. However, they can be labour intensive and expensive. In the past decade, alternative indirect vibration-based approaches which utilise the response of a vehicle passing over a bridge have been developed. This paper investigates such an approach; a low-cost approach for the monitoring of bridge structures which consists of the use of a vehicle fitted with accelerometers on its axles. The approach aims to detect damage in the bridge while obviating the need for direct instrumentation of the bridge. Here, the effectiveness of the approach in detecting damage in a bridge is investigated using a simplified vehicle-bridge interaction (VBI) model in theoretical simulations and a scaled VBI model in a laboratory experiment. In order to identify the existence and location of damage, the vehicle accelerations are recorded and processed using a continuous Morlet wavelet transform and a damage index is established. A parametric study is carried out to investigate the effect of parameters such as the bridge span length, vehicle speed, vehicle mass, damage level and road surface roughness on the accuracy of results.
Resumo:
Predicting the next location of a user based on their previous visiting pattern is one of the primary tasks over data from location based social networks (LBSNs) such as Foursquare. Many different aspects of these so-called “check-in” profiles of a user have been made use of in this task, including spatial and temporal information of check-ins as well as the social network information of the user. Building more sophisticated prediction models by enriching these check-in data by combining them with information from other sources is challenging due to the limited data that these LBSNs expose due to privacy concerns. In this paper, we propose a framework to use the location data from LBSNs, combine it with the data from maps for associating a set of venue categories with these locations. For example, if the user is found to be checking in at a mall that has cafes, cinemas and restaurants according to the map, all these information is associated. This category information is then leveraged to predict the next checkin location by the user. Our experiments with publicly available check-in dataset show that this approach improves on the state-of-the-art methods for location prediction.
Resumo:
TOPIC:
To analyze the literature pertaining to the techniques used in combined cataract and glaucoma surgery, including the technique of cataract extraction, the timing of the surgery (staged procedure versus combined procedure), the anatomic location of the operation, and the use of antifibrosis agents.
CLINICAL RELEVANCE:
Cataract and glaucoma are both common conditions and are often present in the same patient. There is no agreement concerning the optimal surgical management of these disorders when they coexist.
METHODS/LITERATURE REVIEWED:
Electronic searches of English language articles published since 1964 were conducted in Pub MED and CENTRAL, the Cochrane Collaboration's database. These were augmented by a hand search of six ophthalmology journals and the reference lists of a sample of studies included in the literature review. Evidence grades (A, strong; B, moderate; C, weak; I, insufficient) were assigned to the evidence that involved a direct comparison of alternative techniques.
RESULTS:
The preponderance of evidence from the literature suggests a small (2-4 mmHg) benefit from the use of mitomycin-C (MMC), but not 5-fluorouracil (5-FU), in combined cataract and glaucoma surgery (evidence grade B). Two-site surgery provides slightly lower (1-3 mmHg) intraocular pressure (IOP) than one-site surgery (evidence grade C), and IOP is lowered more (1-3 mmHg) by phacoemulsification than by nuclear expression in combined procedures (evidence grade C). There is insufficient evidence to conclude either that staged or combined procedures give better results or that alternative glaucoma procedures are superior to trabeculectomy in combined procedures.
CONCLUSIONS:
In the literature on surgical techniques and adjuvants used in the management of coexisting cataract and glaucoma, the strongest evidence of efficacy exists for using MMC, separating the incisions for cataract and glaucoma surgery, and removing the nucleus by phacoemulsification.
Resumo:
Abstract - The genus Bursaphelenchus comprises almost 100 species mainly from the northern hemisphere, with conifers as the most important hosts. Among the various nematode species, the pine wood nematode (PWN), Bursaphelenchus xylophilus, is the casual agent of pine wilt disease (PWD), and the most important forest pest for pines worldwide, classified as an A1 quarantine organism within the European Union. In 1999 this nematode was detected for the first time in Portugal and Europa associated with maritime pine, Pinus pinaster. Following detection, a national program denominated "Programa Nacional de Luta contra o Nemátodo da Madeira do Pinheiro" (PROLUNP) was created to, among other objectives, determine the distribution of the PWN and its associated vector(s) and host(s), and therefore intensive surveys covering the entire country were conducted with thousands of wood samples and suspected insects being analyzed. This thesis presents the listing, distribution, frequency and the insects associated with Bursaphelenchus species found associated with maritime pine in Portugal, identifying and characterizing the various species by morphological, biometrical and molecular biology (ITS-RFLP and rDNA sequencing analysis) techniques. To achieve the objectives, a total of 4813 maritime pine wood samples and 3294 insects from 22 species and six families were individually analyzed. A total of nine Bursaphelenchus species were found, namely: B. antoniae, B. hellenicus, B. leoni, B. mucronatus, B. pinasteri, B. sexdentati, B. teratospicularis, B. tusciae and B. xylophilus, all of them (with the exception of B. xylophilus) being new records for Portugal. Some of the species appear to have a widespread distribution, such as B. leoni, B. teratospicularis and B. tusciae while others were very rarely found and apparently have a localized distribution range within the country, namely B. antoniae and B. mucronatus. The majority of the species is characteristic of the Mediterranean region and can also be found in countries such as Spain, Italy and Greece, reflecting the affinity of our fauna with those locations. The association of B. hellenicus and B. tusciae with maritime pine is here reported for the first time. Six of the Bursaphelenchus species were also found associated with insects, mainly from the family Scolytidae (Coleoptera). Some of these interactions were described for the first time, namely: B. hellenicus with both Ips sexdentatus and Hylurgus ligniperda, B. sexdentati with both H. ligniperda and Orthotomicus erosus and B. tusciae with H. ligniperda. The exclusive association of B. xylophilus with the cerambycid Monochamus galloprovincialis was also confirmed. The nematode's dauer juveniles were usually found in low numbers in the insect vectors (ca 10-100 per insect), although for B. xylophilus a few thousand specimens per insect were sometimes found. The location of the dauer juveniles differed according to the species, although they were more common under the elytra and wings of the adult insects. A species new to science was detected and formally described as B. antoniae, associated with Hylobius sp. (Coleoptera; Curculionidae) beetles. Morphologically, this new species is very similar to B. hylobianum, although it's distinct ITS-RFLP molecular pattern (with only the enzyme Haelll producing comparable restriction bands) and the failure of hybridization supported the two species as distinct entities. Additional phylogenetic analysis of the 18S rDNA sequence further supported the taxonomical proximity of B. antoniae with B. hylobianum. Concerning the PWN, detailed studies on the development and morphology of B. xylophilus were conducted, and comparative measurements of field-collected and laboratory-maintained populations demonstrated that nematodes from the second group displayed larger size in all morphometric parameters, which could derive from more adequate conditions of nourishment and/or temperature. Taxonomical studies on the development stages of B. xylophilus confirmed the existence of four propagative juvenile stages (J1,J2,J3 and J4), an adult stage with both sexes and two dispersal stages (jIII e jIV), with the measurements of the gonad length allowing the separation of the propagative stages. It is hoped that the acquired knowledge will be useful on future surveys of nematodes of the Bursaphelenchus genus collected from either wood material or insect vectors, and facilitate the correct distinction and identification of the various species which are now known to occur. ### Resumo - 0 género Bursaphelenchus compreende quase 100 espécies, distribuídas sobretudo nos países do hemisfério norte do globo terrestre. Embora algumas espécies já tenham sido detectadas em plantas herbáceas, os hospedeiros vegetais mais comuns deste género são as coníferas, particularmente pinheiros. 0 nemátode da madeira do pinheiro (NMP), Bursaphelenchus xylophilus, é considerado a espécie mais importante deste género uma vez que é o agente causal da doença da murchidão dos pinheiros ("pine wilt disease"). Originário dos Estados Unidos, onde não causa grande impacte, o NMP foi introduzido em alguns países da Ásia (China, Japão, Coreia e Taiwan) e mais recentemente na Europa (Portugal). Nestas regiões é responsável pela destruição de milhares de hectares de coníferas, assumindo uma elevada importância económica. Em Portugal, depois da sua detecção em 1999, associado a Pinus pinaster, foi implementado um programa nacional "Programa Nacional de Luta contra o Nemátodo da Madeira do Pinheiro" (PROLUNP) que permitiu determinar a área afectada pela praga (a sul do rio Tejo, península de Setúbal) bem como definir e implementar estratégias de controlo e prevenção da disseminação do NMP a outras zonas de Portugal. Recentemente, em Junho de 2008, foi confirmada a presença de B. xylophilus em outras regiões de Portugal levando as autoridades oficiais a definir todo o território continental como zona afectada e de restrição. As prospecções intensivas realizadas nos últimos anos incluíram a recolha e análise de milhares de amostras de madeira de pinheiro bem como de insectos associados ao pinheiro bravo conduzindo à identificação de várias espécies de Bursaphelenchus. Assim, os estudos conduzidos neste trabalho tiveram como objectivos efectuar uma caracterização morfológica, biométrica e molecular das espécies associadas a P. pinaster em Portugal bem como a sua distribuição geográfica e abundância. Os estudos biométricos foram realizados com populações extraídas directamente do meio natural. Foi ainda realizada uma pesquisa que permitiu identificar os insectos a que estão associadas essas espécies, os seus possíveis vectores. Foram analisadas no total 4813 amostras de P. pinaster e 3294 insectos (22 espécies pertencentes a seis famílias diferentes). Foram identificadas um total de nove espécies: B. antoniae n. sp., B. hellenicus, B. leoni, B. mucronatus, B. pinasteri, B. sexdentati, B. teratospicularis, B. tusciae e B. xylophilus. Foram realizados estudos morfológicos e biométricos de todas as espécies com excepção de B. mucronatus; o reduzido número de exemplares encontrados em apenas uma amostra foram utilizados para efectuar o diagnóstico molecular desta espécie (ITS-RFLP). Apesar de ter havido, sempre que possível, a confirmação molecular, na maioria dos casos a caracterização morfológica e biométrica permitiu a correcta identificação das espécies. Contudo, foi imprescindível a análise molecular em algumas amostras, nomeadamente para a identificação de B. xylophilus e B. sexdentati; dada a grande semelhança entre B. xylophilus e B. mucronatus e tendo sido encontradas algumas populações de B. xylophilus que possuíam fêmeas com cauda mucronada, foi necessária a realização da confirmação molecular. Com excepção de B. xylophilus, todas as outras espécies foram reportadas pela primeira vez em Portugal. Juntamente com B. xylophilus, B. pinasteri foi a espécie encontrada nas amostras de madeira de pinheiro com maior frequência. Algumas destas espécies como B. leoni, B. teratospicularis e B. tusciae foram reportadas em diferentes localidades do norte, centro e sul de Portugal, apresentando uma vasta distribuição geográfica; este resultado está em consonância com a forte associação destas espécies a climas mediterrânicos tal como acontece em Espanha, França, Itália e Grécia. Em oposição, espécies como B. antoniae e B. mucronatus foram encontradas apenas numa ocasião na região centro (Leiria) e norte (Figueira da Foz) do país, respectivamente. Bursaphelenchus mucronatus é igualmente pouco frequente em Espanha onde ocorre sobretudo na região norte, na Galiza. Esta espécie preferirá climas mais frios, ocorrendo com uma maior frequência nas regiões de latitude norte; esta análise é corroborada pela presença constante em países como Alemanha, Finlândia, França, Noruega, Rússia e Suécia. A nível mundial são descritas neste trabalho pela primeira vez as associações das espécies B. hellenicus e B. tusciae ao hospedeiro vegetal P. pinaster.