Una nova estimació retrospectiva del VAB regional industrial. Espanya, 1860-1930

[cat] En aquest treball, es realitza una nova estimació del VAB industrial espanyol a un nivell de desagregació territorial corresponent a les províncies (NUTSIII) i les Comunitats Autònomes (NUTS II). Per assolir aquest objectiu es planteja una nova metodologia d’estimació de les xifres històriques de VAB industrial regional. Front a les aproximacions tradicionals, basades en la utilització de fonts fiscals com a forma d’aproximar la capacitat productiva industrial, en aquest treball s’ofereix una estimació que també es basa en les rendes generades per la producció industrial de les regions. Amb aquest objectiu, es fa servir la metodologia proposada per Geary i Stark (2002) i les millores proposades per Crafts (2005). La utilització d’aquesta metodologia permet elaborar una nova estimació retrospectiva del VAB industrial de les regions espanyoles a diversos talls temporals corresponents al període 1860-1930.

Lymphocyte specificity to protein antigens. III. Capacity of low responder mice to beef cytochrome c to respond to a peptide fragment of the molecule.

Lymph node cells derived from A.TH or A.TL mice primed with beef cytochrome c show striking patterns of reactivity when assayed in vitro for antigen-induced T cell proliferation. Whereas cells from A.TH mice respond specifically to beef cytochrome c or peptides composed of amino acids 1-65 and 81-104, cells from A.TL mice respond neither to beef cytochrome c nor to peptide 1-65, but proliferate following exposure to either peptide 81-104 or to a cytochrome c hybrid molecule in which the N-terminal peptide of beef (1-65) was substituted by a similar peptide obtained from rabbit cytochrome c. Thus, T cells from mice phenotypically unresponsive to beef cytochrome may, in fact, contain populations of lymphocytes capable of responding to a unique peptide, the response to which is totally inhibited when the same fragment is presented in the sequence of the intact protein.

Access by Capacity and Peak-Load Pricing

Several European telecommunications regulatory agencies have recently introduced a fixed capacity charge (flat rate) to regulate access to the incumbent's network. The purpose of this paper is to show that the optimal capacity charge and the optimal access-minute charge analysed by Armstrong, Doyle, and Vickers (1996) have a similar structure and imply the same payment for the entrant. I extend the analysis tothe case where there is a competitor with market power. In this case, the optimalcapacity charge should be modified to avoid that the entrant cream-skims the market,fixing a longer or a shorter peak period than the optimal. Finally, I consider a multiproduct setting, where the effect of the product differentiation is exacerbated.

Industrial agglomerations and wage gradients: the Spanish economy in the interwar period

This paper gives new evidence on the relationship between integration and industrial agglomeration in the presence of scale economies, by testing directly one of the predictions that can be derived from Krugman (1991), that is, the existence of regional nominal wage gradients and its transformation following changes in trade regimes. Our case study analyzes the effects of the substitution of an open economy by a closed economy regime, exactly the opposite process studied by Hanson (1996, 1997). In Spain, during the interwar period, protectionist policies would have favored the loss of centrality of the coastal location (Barcelona) and the relative rise of central locations (such as Madrid). Our results indicate the existence of a wage gradient centered in Barcelona during the interwar period (1914-1930) and its weakening after 1925.

Potencialidad de la modelización state-space y el filtro de Kalman para el anàlisis regional : una aplicación para el índice de actividad industrial

El déficit existente a nuestro país con respecto a la disponibilidad de indicadores cuantitativos con los que llevar a término un análisis coyuntural de la actividad industrial regional ha abierto un debate centrado en el estudio de cuál es la metodología más adecuada para elaborar indicadores de estas características. Dentro de este marco, en este trabajo se presentan las principales conclusiones obtenidas en anteriores estudios (Clar, et. al., 1997a, 1997b y 1998) sobre la idoneidad de extender las metodologías que actualmente se están aplicando a las regiones españolas para elaborar indicadores de la actividad industrial mediante métodos indirectos. Estas conclusiones llevan a plantear una estrategia distinta a las que actualmente se vienen aplicando. En concreto, se propone (siguiendo a Israilevich y Kuttner, 1993) un modelo de variables latentes para estimar el indicador de la producción industrial regional. Este tipo de modelo puede especificarse en términos de un modelo statespace y estimarse mediante el filtro de Kalman. Para validar la metodología propuesta se estiman unos indicadores de acuerdo con ella para tres de las cuatro regiones españolas que disponen d¿un Índice de Producción Industrial (IPI) elaborado mediante el método directo (Andalucía, Asturias y el País Vasco) y se comparan con los IPIs publicados (oficiales). Los resultados obtenidos muestran el buen comportamiento de l¿estrategia propuesta, abriendo así una línea de trabajo con la que subsanar el déficit al que se hacía referencia anteriormente

Algunes reflexions sobre la construcció d'indicadors indirectes pel seguiment de l'activitat industrial regional

En un gran nombre d'economies, l'evolució de la producció industrial s'analitza a partir de la informació sobre el Producte Industrial Brut i/o el Valor Afegit Brut que proporcionen les Comptabilitats Nacionals. A Espanya, la utilització d'aquestes dades presenta el problema que no estan disponibles tan ràpidament com seria desitjable. En conseqüència, no és possible realitzar un seguiment a curt termini de l'activitat industrial a partir dels mateixos. Per a solucionar aquest problema, l'Institut Nacional d'Estadística elabora un Índex de Producció Industrial mensual a partir de la informació obtinguda a través d'una enquesta dirigida a una mostra representativa de les empreses espanyoles. No obstant això, a nivell regional, les dificultats per a realitzar un seguiment de l'activitat industrial són majors a causa de l'escassesa d'informació estadística. Durant els últims anys, diferents institucions públiques i privades han començat a elaborar indicadors d'activitat per a algunes regions espanyoles, encara que a partir de metodologies no homogènies, de manera que aquests índexs no són directament comparables. Per a corregir aquesta situació, en diferents fòrums s'ha proposat emprar la metodologia utilitzada per l'Institut d'Estadística de Catalunya (IEC) per a la comunitat catalana com alternativa per a aquelles comunitats espanyoles que no disposen d'un indicador de l'activitat industrial, atès que per a Catalunya resulta una metodologia adequada. En aquest treball s'estudia la idoneïtat d'estendre aquesta metodologia a la resta de regions espanyoles. Per a això, es construeixen uns indicadors d'acord amb la metodologia del IEC i es comparen amb els índexs regionals obtinguts per mètodes directes per a tres de les quatre regions que existeixen: Andalusia, Astúries i Euskadi

Industrial-economic survey of Clinton, Iowa, and the surrounding area,1960.

This is an "Industrial-Economic Survey" of Clinton, Iowa and the surrounding area that was compiled and assembled for the use of any manufacturing of commercial organization which has in interest in setting up operations in the general Clinton area. Facts and statistics are shown to use for location analysis. Numerous photos and maps are included.

Modelling non-industrial private forest landowners' strategic decision making by using logistic regression and neural networks: case of predicting the choice of forest taxation basis

Summary

Iowa Commercial and Industrial Network, January 1, 2011

Map produced by Iowa Department of Transportation about Iowa Commercial and Industrial Network.

Chemical properties of soils treated with biological sludge from gelatin industry

The impact of agro-industrial organic wastes in the environment can be reduced when used in agriculture. From the standpoint of soil fertility, residue applications can increase the organic matter content and provide nutrients for plants. This study evaluated the effect of biological sludge from gelatin industry on the chemical properties of two Ultisols (loamy sand and sandy clay) and an Oxisol (clay). The experiment lasted 120 days and was carried out in laboratory in a completely randomized design with factorial arrangement, combining the three soils and six biological sludge rates (0, 100, 200, 300, 400, and 500 m³ ha-1), with three replications. Biological sludge rates of up to 500 m³ ha-1 decreased soil acidity and increased the effective cation exchange capacity (CEC) and N, Ca, Mg, and P availability, without exceeding the tolerance limit for Na. The increase in exchangeable base content, greater than the effective CEC, indicates that the major part of cations added by the sludge remains in solution and can be lost by leaching.

Industrial and urban organic wastes increase soil microbial activity and biomass

Microbial processes have been used as indicators of soil quality, due to the high sensitivity to small changes in management to evaluate, e.g., the impact of applying organic residues to the soil. In an experiment in a completely randomized factorial design 6 x 13 + 4, (pot without soil and residue or absolute control) the effect of following organic wastes was evaluated: pulp mill sludge, petrochemical complex sludge, municipal sewage sludge, dairy factory sewage sludge, waste from pulp industry and control (soil without organic waste) after 2, 4, 6, 12, 14, 20, 28, 36, 44, 60, 74, 86, and 98 days of incubation on some soil microbial properties, with four replications. The soil microbial activity was highly sensitive to the carbon/nitrogen ratio of the organic wastes. The amount of mineralized carbon was proportional to the quantity of soil-applied carbon. The average carbon dioxide emanating from the soil with pulp mill sludge, corresponding to soil basal respiration, was 0.141 mg C-CO2 100 g-1 soil h-1. This value is 6.4 times higher than in the control, resulting in a significant increase in the metabolic quotient from 0.005 in the control to 0.025 mg C-CO2 g-1 Cmic h-1 in the soil with pulp mill sludge. The metabolic quotient in the other treatments did not differ from the control (p < 0.01), demonstrating that these organic wastes cause no disturbance in the microbial community.

Heat capacity measurements on the equiatomic compounds in Ni-X (X = Al, In, Si, Ge and Bi) and M-Sb (with M = Ni, Co and Fe) systems

Molar heat capacities of the binary compounds NiAl, NiIn, NiSi, NiGe, NiBi, NiSb, CoSb and FeSb were determined every 10 K by differential scanning calorimetry in the temperature range 310-1080 K. The experimental results have been fitted versus temperature according to C-p = a + b . T + c . T-2 + d . T-2. Results are given, discussed and compared to estimations found in the literature. Two compounds, NiBi and FeSb, are subject to transformations between 460 and 500 K. (C) 1999 Elsevier Science Ltd. All rights reserved.

Extractants to assess zinc phytoavailability in mineral fertilizer and industrial by-products

Efficient analytical methods for the quantification of plant-available Zn contained in mineral fertilizers and industrial by-products are fundamental for the control and marketing of these inputs. In this sense, there are some doubts on the part of the scientific community as well as of the fertilizer production sector, whether the extractor requested by the government (Normative Instruction No. 28, called 2nd extractor), which is citric acid 2 % (2 % CA) (Brasil, 2007b), is effective in predicting the plant availability of Zn via mineral fertilizers and about the agronomic significance of the required minimal solubility of 60 % compared to the total content (HCl) (Brasil, 2007a). The purpose of this study was to evaluate the alternative extractors DTPA, EDTA, neutral ammonium citrate (NAC), buffer solution pH 6.0, 10 % HCl, 10 % sulfuric acid, 1 % acetic acid, water, and hot water to quantify the contents of Zn available for maize and compare them with indices of agronomic efficiency of fertilizers and industrial by-products when applied to dystrophic Clayey Red Latosol and Dystrophic Alic Red Yellow Latosol with medium texture. The rate of Zn applied to the soil was 5 mg kg-1, using the sources zinc sulfate, commercial granular zinc, ash and galvanic sludge, ash and two brass slags. Most Zn was extracted from the sources by DTPA, 10 % HCl, NAC, 1% acetic acid, and 10 % sulfuric acid. Recovery by the extractors 2 % CA, EDTA, water, and hot water was low. The agronomic efficiency index was found to be high when using galvanic sludge (238 %) and commercial granular zinc (142 %) and lower with brass slag I and II (67 and 27 %, respectively). The sources galvanizing ash and brass ash showed solubility lower than 60 % in 2 % CA, despite agronomic efficiency indices of 78 and 125 %, respectively. The low agronomic efficiency index of industrial by-products such as brass slag I and galvanizing ash can be compensated by higher doses, provided there is no restriction, as well as for all other sources, in terms of contaminant levels of arsenic, cadmium, chromium, lead, and mercury as required by law (Normative Instruction No 27/2006). The implementation of 2nd extractor 2 % CA and the requirement of minimum solubility for industrial by-products could restrict the use of alternative sources as potential Zn sources for plants.

Fornecimento de cálcio para plantas de eucalyptus saligna por meio de aplicação de resíduo industrial lama de cal

O resíduo industrial lama de cal, originado da produção de papel kraft branqueada de eucalipto, apresenta em sua composição quantidade considerável de cálcio (Ca), o que pode contribuir para reduzir o consumo de fertilizantes em plantios florestais. Com o objetivo de avaliar o efeito da lama de cal como fonte de Ca e seus efeitos sobre a disponibilidade de nutrientes e produção de matéria seca da parte aérea de plantas de eucalipto, foram conduzidos dois ensaios em vasos, em casa de vegetação, na área de pesquisa da Klabin Florestal do Paraná. Os solos utilizados foram um Neossolo Quartzarênico órtico (RQo) e um Nitossolo Vermelho eutroférrico (NV). Os tratamentos constituíram-se de duas fontes de Ca, calcário dolomítico e lama de cal, e de uma testemunha, sendo identificados como: RQo testemunha, RQo calcário e RQo lama de cal; e NV testemunha, NV calcário e NV lama de cal. O delineamento experimental utilizado foi inteiramente casualizado, com quatro repetições. Para tanto, plantas de Eucalyptus saligna foram mantidas por 126 dias em vasos. Quantificou-se a produção de matéria seca e realizaram-se as análises de folhas e dos solos, por ocasião da coleta das plantas. Os dados revelaram que tanto a adição de calcário dolomítico quanto a lama de cal promoveram o fornecimento de Ca para as plantas de eucalipto, proporcionando aumentos na produção de matéria seca. Os teores de Ca e Na nas folhas de eucalipto foram acrescidos com a adição do resíduo ao solo, em comparação com o tratamento com calcário dolomítico, enquanto os teores de N, P, K e S foram semelhantes. As plantas cultivadas nos tratamentos RQo testemunha e RQo lama de cal apresentaram teores foliares de Mg abaixo da faixa considerada adequada. A adição de lama no solo elevou o pH e as concentrações de Ca e de Na, reduziu o Al trocável e não influenciou na disponibilidade de Mg, fato que pode proporcionar deficiência de Mg às plantas, em solos com baixos níveis desse nutriente, conforme observado neste estudo.