A theory of constraints service systems improvement method: Case of the airline turnaround problem

This dissertation develops a process improvement method for service operations based on the Theory of Constraints (TOC), a management philosophy that has been shown to be effective in manufacturing for decreasing WIP and improving throughput. While TOC has enjoyed much attention and success in the manufacturing arena, its application to services in general has been limited. The contribution to industry and knowledge is a method for improving global performance measures based on TOC principles. The method proposed in this dissertation will be tested using discrete event simulation based on the scenario of the service factory of airline turnaround operations. To evaluate the method, a simulation model of aircraft turn operations of a U.S. based carrier was made and validated using actual data from airline operations. The model was then adjusted to reflect an application of the Theory of Constraints for determining how to deploy the scarce resource of ramp workers. The results indicate that, given slight modifications to TOC terminology and the development of a method for constraint identification, the Theory of Constraints can be applied with success to services. Bottlenecks in services must be defined as those processes for which the process rates and amount of work remaining are such that completing the process will not be possible without an increase in the process rate. The bottleneck ratio is used to determine to what degree a process is a constraint. Simulation results also suggest that redefining performance measures to reflect a global business perspective of reducing costs related to specific flights versus the operational local optimum approach of turning all aircraft quickly results in significant savings to the company. Savings to the annual operating costs of the airline were simulated to equal 30% of possible current expenses for misconnecting passengers with a modest increase in utilization of the workers through a more efficient heuristic of deploying them to the highest priority tasks. This dissertation contributes to the literature on service operations by describing a dynamic, adaptive dispatch approach to manage service factory operations similar to airline turnaround operations using the management philosophy of the Theory of Constraints.

Making chamber measurements of net ecosystem exchange in a short-hydroperiod Everglades marsh (at TS/Ph-1b), Taylor Slough

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

An Analysis of Stock Market Performance:The Dow Jones Industrial Average and the Three Top Performing Lodging Firma: 1982-1988

In their dialogue - An Analysis of Stock Market Performance: The Dow Jones Industrial Average and the Three Top Performing Lodging Firms 1982 – 1988 - by N. H. Ringstrom, Professor and Elisa S. Moncarz, Associate Professor, School of Hospitality Management at Florida International University, Professors Ringstrom and Moncarz state at the outset: “An interesting comparison can be made between the Dow Jones lndustrial Average and the three top performing, publicly held lodging firms which had $100 million or more in annual lodging revenues. The authors provide that analytical comparison with Prime Motor Inns Inc., the Marriott Corporation, and Hilton Hotels Corporation.” “Based on a criterion of size, only those with $100 million in annual lodging revenues or more resulted in the inclusion of the following six major hotel firms: Prime Motor Inns, Inc., Marriott Corporation, Hilton Hotels Corporation, Ramada Inc., Holiday Corporation and La Quinta Motor Inns, Inc.,” say Professors Ringstrom and Moncarz in framing this discussion with its underpinnings in the years 1982 to 1988. The article looks at each company’s fiscal and Dow Jones performance for the years in question, and presents a detailed analysis of said performance. Graphic analysis is included. It helps to have a fairly vigorous knowledge of stock market and fiscal examination criteria to digest this material. The Ringstrom and Moncarz analysis of Prime Motor Inns Incorporated occupies the first 7 pages of this article in and of itself. Marriot Corporation also occupies a prominent position in this discussion. “Marriott, a giant in the hospitality industry, is huge and continuing to grow. Its 1987 sales were more than $6.5 billion, and its employees numbered over 200,000 individuals, which place Marriott among the 10 largest private employers in the country,” Ringstrom and Moncarz parse Marriott’s influence as a significant financial player. “The firm has a fantastic history of growth over the past 60 years, starting in May 1927 with a nine-seat A & W Root Beer stand in Washington, D.C.,” offer the authors in initialing Marriot’s portion of the discussion with a brief history lesson. The Marriot firm was officially incorporated as Hot Shoppes Inc. in 1929. As the thesis statement for the discussion suggests the performance of these huge, hospitality giants is compared and contrasted directly to the Dow Jones Industrial Average performance. Reasons and empirical data are offered by the authors to explain the distinctions. It would be difficult to explain those distinctions without delving deeply into corporate financial history and the authors willingly do so in an effort to help you understand the growth, as well as some of the setbacks of these hospitality based juggernauts. Ringstrom and Moncarz conclude the article with an extensive overview and analysis of the Hilton Hotels Corporation performance for the period outlined. It may well be the most fiscally dynamic of the firms presented for your perusal. “It is interesting to note that Hilton Hotels Corporation maintained a very strong financial position with relatively little debt during the years 1982-1988…the highest among all companies in the study,” the authors paint.

An interview study of community college student perspectives on service -learning

Over the past two decades, the community college in the United States has boasted a leadership role in the movement to make education community-based and performance-oriented. This has led to an intensification in attempts to search for more innovative means to make education more experiential and relevant to students' lived experiences. ^ One such innovative program that holds promise to meet this challenge is service-learning. This paradigm attempts to relate the academic education in the classroom to community-based problems, which fits in neatly with the community-based characteristics of the community college. It promises to link ideas developed in the classroom and their practical application within the community through guided reflection. It is designed to enhance and enrich student learning of course material by combining citizenship, academic subjects, skills, and values. ^ Though many studies have been carried out in regard to the outcomes of service-learning through quantitative means, relatively few qualitative studies are available, and those available have primarily studied traditional students at four-year residential colleges or universities. Therefore, there is an urgent need to study non-traditional students' perspectives at the community college level. ^ The purpose of this study was to describe and explain the perspectives of five students at Broward Community College, Central Campus, Ft. Lauderdale, Florida. The following exploratory questions guided this study: (1) What elements constitute these students' perspectives? (2) What variables influence their perspectives? (3) What beliefs do these students hold about their service-learning experience which support or are contrary to their perspectives? ^ This ethnographic interview study was conducted over a period of twelve months and consisted of three interviews for each of the five participants. The analysis of the data was conducted following the stringent principles of ethnographic research which included constant comparative analysis. The interviews were tape recorded with the participants' permission, transcribed verbatim, and organized into categories for in-depth understanding. Furthermore, these categories were developed from the data collected and an organizational scheme for understanding and interpreting of these perspectives emerged. The researcher, as well, kept a reflective journal of the research process as part of the data set. ^ The results of this study show the need for a better grasp of the concepts of service-learning on the part of all involved with its implementation. In spite of this, all of the participants displayed gains to a greater or lesser degree in personal growth, academic skills, and citizenship skills. ^

Personality and job performance: The mediating roles of leader -member exchange quality and action control

The present investigation examined the relationships among personality (as conceptualized by the Big Five Factors), leader-member exchange (LMX) quality, action control, organizational citizenship behaviors (OCB), and overall job performance (OJP). Two mediator variables were proposed and tested in this study: LMX and Action Control. Two-hundred and seven currently employed regular elementary school classroom teachers provided data during the 2000–2001 academic school year. Teachers provided personality, LMX quality (member or subordinate perspective), action control, job tenure, and demographic data. Nine school administrators (i.e., Principals, Assistant Principals) were the source for supervisor ratings of OCB, OJP, and LMX quality (leader or supervisor perspective). In eight of the nine total schools, teachers completed questionnaires during an after-school teacher gathering; in the remaining school location questionnaires were dropped off, distributed to teachers, and re-collected two weeks later. Results indicated a significant relationship between the OCB scale and overall supervisory ratings of OJP. The relationship among the big five factors of personality and OJP did not reach statistical significance, nor did the relationships among personality and OCB. The data indicated that none of the teacher tenure variables (i.e., teacher, school, or time worked with principal tenure) moderated the personality-OCB relationship nor the personality-OJP relationship. Finally, a review of the correlations among the variables of interest precluded conducting a mediation between personality-performance by OCB, mediation of personality-OCB by action control, and mediation of personality-OCB by LMX. In conclusion, the data reveal that personality was not significantly correlated with supervisory ratings of OJP or significantly related to supervisory ratings of overall OCB. Moreover, LMX quality and action control did not mediate the relationships between Personality-OJP nor the Personality-OCB relationship. Significant relationships were found between disengagement and overall LMX quality and between Initiative and overall LMX quality (both LMX-Teacher perspectives) as well as between personality variables and both Disengagement and Initiative action control variables. Despite the limitations inherent in this study, these latter findings suggest “lessons” for teachers and school administrators alike. ^

International tourism : can it contribute to Nigeria's economic growth as other industrial sectors?

The growth of international tourism and the attendant economic benefits to the world nations, has been phenominal since the end of the second world war. It is considered that the industry's upsurge will continue even in the phase of various constraints exemplified in high fuel cost, constant increase in fares and the threatening world-wide recessions. Developed as well as developing countries have gained substantially from the industry. A recent development shows increasing tourist traffic towards developing countries, while developed countries still hold their fort in stable growth of tourist receipts. The strategic beneficial effects of international tourist industry are often quantified in terms of foreign exchange earnings, employments offered, and the Real Estate super-structures; but in general,the industry has innumerable direct and indirect benefits to any nation engaging in the trade. The objective of this thesis is to demonstrate by comparative analysis and proven parameters that the international tourist industry which is given low priority in development in Nigeria, can equally contribute to the nation's economic growth as other industrial sectors which receive high priority and patronage in development. The data for this paper are gathered from primary sources which are i) responses by the Federal and State Governments' tourism-related offices; ii) government publications e.a. the Third National Development Plan of Federal Republic of Nigeria; and iii) Books and collections. The secondary sources include reports,periodicals and hospitality industry publications. To formally establish the international tourist industry in Nigeria, all the governments (Federal, State and Local) and the private sector in the country, should commence the development of the industry with research and feasibility studies, to be followed by proper planning at all levels and based on the result of the research and feasibility studies.

An interview study of community college student perspectives on service-learning

Over the past two decades, the community college in the United States has boasted a leadership role in the movement to make education community-based and performance-oriented. This has led to an intensification in attempts to search for more innovative means to make education more experiential and relevant to students' lived experiences. One such innovative program that holds promise to meet this challenge is service- learning. This paradigm attempts to relate the academic education in the classroom to community-based problems, which fits in neatly with the community-based characteristics of the community college. It promises to link ideas developed in the classroom and their practical application within the community through guided reflection. It is designed to enhance and enrich student learning of course material by combining citizenship, academic subjects, skills, and values. Though many studies have been carried out in regard to the outcomes of service-learning through quantitative means, relatively few qualitative studies are available, and those available have primarily studied traditional students at four-year residential colleges or universities. Therefore, there is an urgent need to study non-traditional students' perspectives at the community college level. The purpose of this study was to describe and explain the perspectives of five students at Broward Community College, Central Campus, Ft. Lauderdale, Florida. The following exploratory questions guided this study: 1. What elements constitute these students' perspectives? 2. What variables influence their perspectives? 3. What beliefs do these students hold about their service-learning experience which support or are contrary to their perspectives? This ethnographic interview study was conducted over a period of twelve months and consisted of three interviews for each of the five participants. The analysis of the data was conducted following the stringent principles of ethnographic research which included constant comparative analysis. The interviews were tape recorded with the participants' permission, transcribed verbatim, and organized into categories for in-depth understanding. Furthermore, these categories were developed from the data collected and an organizational scheme for understanding and interpreting of these perspectives emerged. The researcher, as well, kept a reflective journal of the research process as part of the data set. The results of this study show the need for a better grasp of the concepts of service-learning on the part of all involved with its implementation. In spite of this, all of the participants displayed gains to a greater or lesser degree in personal growth, academic skills, and citizenship skills.

A preceptoria na estratégia saúde da família: o olhar dos profissionais de saúde

The proposal of teaching-service integration from work experience brings a challenge to the professionals involved in health services: to combine their healthcare practice to the preparation of new professionals in accordance with the national health model. In Recife, the assistance network is known as school network, since it provides all its health equipment for Higher Education Institutions, in special for professionals who work as preceptors, making this activity an important component of the services network. The objective of the present study was to analyze preceptorship experience herein Multidisciplinary Residences in Health in the look of health professionals. This is a qualitative descriptive study, involving physicians, dentists, and nurses that have worked as preceptors for at least two years in multidisciplinary residency linked to two Higher Education Institutions. A semistructured interview was used as research instrument and data were processed by using the software Alceste 4.9. Results indicated four semantic classes which were divided into two axis. Axis 1, composed of class 4, and Axis 2, composed of classes 3, 2 and 1. Categorization considered the relation between classes. It was observed that in class 4 work overload is a dilemma for professional participation in preceptorship. This is noted by the words manage, time, patient, give, and complicated. However, it is also observed that the preceptorship involves positive learning and teaching actions, reinforced by the words say, explain, and discuss. Class 2 shows the preceptorship as an experience exchange, a positive moment that provides theoretical upgrade to the preceptor, associated to the professional practices performed by the binominal preceptor-student in health services and communities. In this perspective, everyone is benefited since preceptorship is structured according to dynamic aspects of knowledge, experienced in settings permeated by people´s health necessities. In class 3, potentialities of this practice are shown, and personal compromise is the main reason of acting as a preceptor in this network of education/attention, demonstrated in the words reason, formation, to like and professionals. Last, but not the least, class 1 suggests the importance of preceptorship and one of the strategies to create the National Politics of Humanization, from the teachingservice-community integration, observed in the words: arrives, university, fundamental, manner, partnership, service, and student. Besides, it rates perspectives and challenges for the improvement of the preceptorship in health services. Integrating teaching and service can enhance the proposals of changes concerning the healthcare model practiced in services, but this relation is still superficial. The preceptor is an actor in action, playing real life roles, and that is when he becomes essential to seek training with the profile defended in the proposed training of a professional who is capable of learning to learn

Acompanhamento coletivo do crescimento e desenvolvimento infantil: participação de mães/cuidadores

This study aimed to analyze the participation of mothers/caregivers from the perspective of the health care model that directs the collective monitoring of child growth and development. This is an exploratory and descriptive research with qualitative approach, carried out in two Family Health Units located in the city of Natal/RN. Data were collected between August and September 2014, through participant observation and semi-structured interview technique, with mothers of infants seen at follow-up visits collective child growth and development. A total of 13 mothers were included who met the following inclusion criteria: being a mother/caregiver responsible for the care of children who have attended one or more meeting of collective monitoring of child growth and development. Exclusion criteria was established: users outside the area covered by the Health Unit Family and who did not use the National Health System as the primary health care service. For the treatment of the collected material, the content analysis was used, thematic Bardin. The study followed the ethical and legal principles governing the scientific research on human subjects recommended by Resolution nº. 466/2012 of the National Health Council and its realization occurred with the approval of the project in the Research Ethics Committee of the Federal University of Rio Grande do North, which was approved by Opinion Embodied nº. 719 949, of June 27, 2014, and Certificate Presentation of Findings Ethics No 32510514.7.0000.5537. Although not conceptualize theoretically mothers demonstrated that collective consultations of child growth and development are actions aimed at health surveillance model, since most pointed monitoring your child to actions that can be measured. Even with that, it was established the existence of health promotion actions by reporting the exchange of experience and leadership of the subjects in collective action, factor facilitated by the link established between users and professionals and users. In this action there is the induction of permanent horizontal relationship where we seek to combine popular knowledge to scientific knowledge in order to promote the integral care for the child. However, it is still possible to find professionals who directs its assistance only to pathological processes and fail to create comprehensive care alternatives. In addition, there is still embezzlement in multi that should provide care to the child population. This factor may be related to their professional training, and thus an issue that can last for a few years. We conclude that it is necessary to incorporate alternatives and models of care that support overcoming limitations and enhancing the health of the population, involving it in the prospect of a better quality of life and therefore health.

Influência da absorção de umidade no comportamento mecânico nos compósitos poliméricos híbridos Kevlar/vidro quando imerso em água do mar e petróleo

The polymer matrix composite materials are being used on a large scale in the most different industrial fields such as aerospace, automotive, oil, among others, since the industrial perspectives is currently working with materials which have a good mechanical performance at high service life and cost / benefit. Thus, the determination of the mechanical properties is indispensable for the characterization of waste resulting in greater expansion of this type of material. Thus, this work will be obtained three plates laminated with tereftálica polymeric matrix reinforced by a bidirectional woven E-glass and kevlar both industrially made, where the plates are manufactured by manual lamination process (hand lay-up), all laminates have five enhancement layers, the first hybrid laminate will consist of bidirectional woven E-glass fiber, kevlar fiber interspersed with layers, is formed by the second bidirectional woven kevlar fiber at the ends of the laminate (two layers), and in the center the glass fiber fabric (three layers), the third plate is composed of only the bidirectional woven E-glass fiber. Then were prepared specimens (CP) by standard, to determine the mechanical properties of tensile and bending in three points. After fabrication of the specimens, they were immersed in oil and seawater. After that, there was a comparison of the mechanical properties for the test condition in the dry state. Showing that there was a considerable increase in the properties studied because the effect of hybridization in laminates.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Carbonate preservation of sediment cores from the Great Bahama Bank

The oceanic carbon cycle mainly comprises the production and dissolution/ preservation of carbonate particles in the water column or within the sediment. Carbon dioxide is one of the major controlling factors for the production and dissolution of carbonate. There is a steady exchange between the ocean and atmosphere in order to achieve an equilibrium of CO2; an anthropogenic rise of CO2 in the atmosphere would therefore also increase the amount of CO2 in the ocean. The increased amount of CO2 in the ocean, due to increasing CO2-emissions into the atmosphere since the industrial revolution, has been interpreted as "ocean acidification" (Caldeira and Wickett, 2003). Its alarming effects, such as dissolution and reduced CaCO3 formation, on reefs and other carbonate shell producing organisms form the topic of current discussions (Kolbert, 2006). Decreasing temperatures and increasing pressure and CO2 enhance the dissolution of carbonate particles at the sediment-water interface in the deep sea. Moreover, dissolution processes are dependent of the saturation state of the surrounding water with respect to calcite or aragonite. Significantly increased dissolution has been observed below the aragonite or calcite chemical lysocline; below the aragonite compensation depth (ACD), or calcite compensation depth (CCD), all aragonite or calcite particles, respectively, are dissolved. Aragonite, which is more prone to dissolution than calcite, features a shallower lysocline and compensation depth than calcite. In the 1980's it was suggested that significant dissolution also occurs in the water column or at the sediment-water interface above the lysocline. Unknown quantities of carbonate produced at the sea surface, would be dissolved due to this process. This would affect the calculation of the carbonate production and the entire carbonate budget of the world's ocean. Following this assumption, a number of studies have been carried out to monitor supralysoclinal dissolution at various locations: at Ceara Rise in the western equatorial Atlantic (Martin and Sayles, 1996), in the Arabian Sea (Milliman et al., 1999), in the equatorial Indian Ocean (Peterson and Prell, 1985; Schulte and Bard, 2003), and in the equatorial Pacific (Kimoto et al., 2003). Despite the evidence for supralysoclinal dissolution in some areas of the world's ocean, the question still exists whether dissolution occurs above the lysocline in the entire ocean. The first part of this thesis seeks answers to this question, based on the global budget model of Milliman et al. (1999). As study area the Bahamas and Florida Straits are most suitable because of the high production of carbonate, and because there the depth of the lysocline is the deepest worldwide. To monitor the occurrence of supralysoclinal dissolution, the preservation of aragonitic pteropod shells was determined, using the Limacina inflata Dissolution Index (LDX; Gerhardt and Henrich, 2001). Analyses of the grain-size distribution, the mineralogy, and the foraminifera assemblage revealed further aspects concerning the preservation state of the sediment. All samples located at the Bahamian platform are well preserved. In contrast, the samples from the Florida Straits show dissolution in 800 to 1000 m and below 1500 m water depth. Degradation of organic material and the subsequent release of CO2 probably causes supralysoclinal dissolution. A northward extension of the corrosive Antarctic Intermediate Water (AAIW) flows through the Caribbean Sea into the Gulf of Mexico and might enhance dissolution processes at around 1000 m water depth. The second part of this study deals with the preservation of Pliocene to Holocene carbonate sediments from both the windward and leeward basins adjacent to Great Bahama Bank (Ocean Drilling Program Sites 632, 633, and 1006). Detailed census counts of the sand fraction (250-500 µm) show the general composition of the coarse grained sediment. Further methods used to examine the preservation state of carbonates include the amount of organic carbon and various dissolution indices, such as the LDX and the Fragmentation Index. Carbonate concretions (nodules) have been observed in the sand fraction. They are similar to the concretions or aggregates previously mentioned by Mullins et al. (1980a) and Droxler et al. (1988a), respectively. Nonetheless, a detailed study of such grains has not been made to date, although they form an important part of periplatform sediments. Stable isotopemeasurements of the nodules' matrix confirm previous suggestions that the nodules have formed in situ as a result of early diagenetic processes (Mullins et al., 1980a). The two cores, which are located in Exuma Sound (Sites 632 and 633), at the eastern margin of Great Bahama Bank (GBB), show an increasing amount of nodules with increasing core depth. In Pliocene sediments, the amount of nodules might rise up to 100%. In contrast, nodules only occur within glacial stages in the deeper part of the studied core interval (between 30 and 70 mbsf) at Site 1006 on the western margin of GBB. Above this level the sediment is constantly being flushed by bottom water, that might also contain corrosive AAIW, which would hinder cementation. Fine carbonate particles (<63 µm) form the matrix of the nodules and do therefore not contribute to the fine fraction. At the same time, the amount of the coarse fraction (>63 µm) increases due to the nodule formation. The formation of nodules might therefore significantly alter the grain-size distribution of the sediment. A direct comparison of the amount of nodules with the grain-size distribution shows that core intervals with high amounts of nodules are indeed coarser than the intervals with low amounts of nodules. On the other hand, an initially coarser sediment might facilitate the formation of nodules, as a high porosity and permeability enhances early diagenetic processes (Westphal et al., 1999). This suggestion was also confirmed: the glacial intervals at Site 1006 are interpreted to have already been rather coarse prior to the formation of nodules. This assumption is based on the grain-size distribution in the upper part of the core, which is not yet affected by diagenesis, but also shows coarser sediment during the glacial stages. As expected, the coarser, glacial deposits in the lower part of the core show the highest amounts of nodules. The same effect was observed at Site 632, where turbidites cause distinct coarse layers and reveal higher amounts of nodules than non-turbiditic sequences. Site 633 shows a different pattern: both the amount of nodules and the coarseness of the sediment steadily increase with increasing core depth. Based on these sedimentological findings, the following model has been developed: a grain-size pattern characterised by prominent coarse peaks (as observed at Sites 632 and 1006) is barely altered. The greatest coarsening effect due to the nodule formation will occur in those layers, which have initially been coarser than the adjacent sediment intervals. In this case, the overall trend of the grain-size pattern before and after formation of the nodules is similar to each other. Although the sediment is altered due to diagenetic processes, grain size could be used as a proxy for e.g. changes in the bottom-water current. The other case described in the model is based on a consistent initial grain-size distribution, as observed at Site 633. In this case, the nodule reflects the increasing diagenetic alteration with increasing core depth rather than the initial grain-size pattern. In the latter scenario, the overall grain-size trend is significantly changed which makes grain size unreliable as a proxy for any palaeoenvironmental changes. The results of this study contribute to the understanding of general sedimentation processes in the periplatform realm: the preservation state of surface samples shows the influence of supralysoclinal dissolution due to the degradation of organic matter and due to the presence of corrosive water masses; the composition of the sand fraction shows the alteration of the carbonate sediment due to early diagenetic processes. However, open questions are how and when the alteration processes occur and how geochemical parameters, such as the rise in alkalinity or the amount of strontium, are linked to them. These geochemical parameters might reveal more information about the depth in the sediment column, where dissolution and cementation processes occur.

A value-oriented model for managing service supply chains

Service supply chain (SSC) has attracted more and more attention from academia and industry. Although there exists extensive product-based supply chain management models and methods, they are not applicable to the SSC as the differences between service and product. Besides, the existing supply chain management models and methods possess some common deficiencies. Because of the above reasons, this paper develops a novel value-oriented model for the management of SSC using the modeling methods of E3-value and Use Case Maps (UCMs). This model can not only resolve the problems of applicability and effectiveness of the existing supply chain management models and methods, but also answer the questions of ‘why the management model is this?’ and ‘how to quantify the potential profitability of the supply chains?’. Meanwhile, the service business processes of SSC system can be established using its logic procedure. In addition, the model can also determine the value and benefits distribution of the entire service value chain and optimize the operations management performance of the service supply.

China in Global Value Chains: Implications for Industrial Policy and Development

Rapid technological advances and liberal trade regimes permit functional reintegration of dispersed activities into new border-spanning business networks variously referred to as global value chains (GVCs). Given that the gains of a country from GVCs depend on the activities taking place in its jurisdiction and their linkages to global markets, this study starts by providing a descriptive overview of China’s economic structure and trade profile. The first two chapters of this paper demonstrate what significant role GVCs have played in China’s economic growth, evident in enhanced productivity, diversification, and sophistication of China’s exports, and how these economic benefits have propelled China’s emergence as the world’s manufacturing hub in the past two decades. However, benefits from GVC participation – in particular technological learning, knowledge building, and industrial upgrading – are not automatic. What strategies would help Chinese industries engage with GVCs in ways that are deemed sustainable in the long run? What challenges and related opportunities China would face throughout the implementation process? The last two chapters of this paper focus on implications of GVCs for China’s industrial policy and development. Chapter Three examines how China is reorienting its manufacturing sector toward the production of higher value-added goods and expanding its service sector, both domestically and internationally; while Chapter Four provides illustrative policy recommendations on dealing with the positive and negative outcomes triggered by GVCs, within China and beyond the country’s borders. To the end, this study also hopes to shed some light on the lessons and complexities that arise from GVC participation for other developing countries.